Search PubMed⌕ Search

Biomedical subjects

Robert L Mauck

Publications and source records attributed to Robert L Mauck.

14 recordsLinked to original sources

Engineering controllable anisotropy in electrospun biodegradable nanofibrous scaffolds for musculoskeletal tissue engineering.

Many musculoskeletal tissues exhibit significant anisotropic mechanical properties reflective of a highly oriented underlying extracellular matrix. For tissue engineering, recreating this organization of the native tissue remains a challenge. To address this issue, this study explored the fabrication of biodegradable nanofibrous scaffolds composed of aligned fibers via electrospinning onto a rotating target, and characterized their mechanical anisotropy as a function of the production parameters. The characterization showed that nanofiber organization was dependent on the rotation speed of the target; randomly oriented fibers (33% fiber alignment) were produced on a stationary shaft, whereas highly oriented fibers (94% fiber alignment) were produced when rotation speed was increased to 9.3m/s. Non-aligned scaffolds had an isotropic tensile modulus of 2.1+/-0.4MPa, compared to highly anisotropic scaffolds whose modulus was 11.6+/-3.1MPa in the presumed fiber direction, suggesting that fiber alignment has a profound effect on the mechanical properties of scaffolds. Mechanical anisotropy was most pronounced at higher rotation speeds, with a greater than 33-fold enhancement of the Young's modulus in the fiber direction compared to perpendicular to the fiber direction when the rotation speed reached 8m/s. In cell culture, both the organization of actin filaments of human mesenchymal stem cells and the cellular alignment of meniscal fibroblasts were dictated by the prevailing nanofiber orientation. This study demonstrates that controllable and anisotropic mechanical properties of nanofibrous scaffolds can be achieved by dictating nanofiber organization through intelligent scaffold design.

Absorbable Implants↗

Fabrication and characterization of six electrospun poly(alpha-hydroxy ester)-based fibrous scaffolds for tissue engineering applications.

The most common synthetic biodegradable polymers being investigated for tissue engineering applications are FDA approved, clinically used poly(alpha-hydroxy esters). To better assess the applicability of the electrospinning technology for scaffold fabrication, six commonly used poly(alpha-hydroxy esters) were used to prepare electrospun fibrous scaffolds, and their physical and biological properties were also characterized. Our results suggest that specific, optimized fabrication parameters are required for each polymer to produce scaffolds that consist of uniform structures morphologically similar to native extracellular matrix. Scanning electron microscopy (SEM) revealed a highly porous, three-dimensional structure for all scaffolds, with average fiber diameter ranging from 300nm to 1.5microm, depending on the polymer type used. The poly(glycolic acid) (PGA) and poly(d,l-lactic-co-glycolic acid 50:50) (PLGA5050) fibrous structures were mechanically stiffest, whereas the poly(l-lactic acid) (PLLA) and poly(epsilon-caprolactone) (PCL) scaffolds were most compliant. Upon incubation in physiological solution, severe structural destruction due to polymer degradation was found in the PGA, poly(d,l-lactic acid) (PDLLA), PLGA5050, and poly(d,l-lactic-co-glycolic acid 85:15) (PLGA8515) fibrous scaffolds, whereas PLLA and PCL fibrous scaffolds maintained a robust scaffold structure during the same time period, based on macroscopic and SEM observations. In addition, PLLA scaffolds supported the highest rate of proliferation of seeded cells (chondrocytes and mesenchymal stem cells) than other polymeric scaffolds. Our findings showed that PLLA and PCL based fibrous scaffolds exhibited the most optimal structural integrity and supported desirable cellular response in culture, suggesting that such scaffolds may be promising candidate biomaterials for tissue engineering applications.

Animals↗

Cartilage tissue engineering: its potential and uses.

PURPOSE OF REVIEW: The prevalent nature of osteoarthritis, a cartilage degenerative disease that results in the erosion of joint surfaces and loss of mobility, underscores the importance of developing functional articular cartilage replacement. Recent research efforts have focused on tissue engineering as a promising approach for cartilage regeneration and repair. Tissue engineering is a multidisciplinary research area that incorporates both biological and engineering principles for the purpose of generating new, living tissues to replace the diseased/damaged tissue and restore tissue/organ function. This review surveys and highlights the current concepts and recent progress in cartilage tissue engineering, and discusses the challenges and potential of this rapidly advancing field of biomedical research. RECENT FINDINGS: Cartilage tissue engineering is critically dependent on selection of appropriate cells (differentiated or progenitor cells); fabrication and utilization of biocompatible and mechanically suitable scaffolds for cell delivery; stimulation with chondrogenically bioactive molecules introduced in the form of recombinant proteins or via gene transfer; and application of dynamic, mechanical loading regimens for conditioning of the engineered tissue constructs, including the design of specialized biomechanically active bioreactors. SUMMARY: Cell selection, scaffold design and biological stimulation remain the challenges of function tissue engineering. Successful regeneration or replacement of damaged or diseased cartilage will depend on future advances in our understanding of the biology of cartilage and stem cells and technological development in engineering.

Biocompatible Materials↗

A layered agarose approach to fabricate depth-dependent inhomogeneity in chondrocyte-seeded constructs.

Inspired by the depth-dependent inhomogeneity of articular cartilage, it was hypothesized that a novel layered agarose technique, using a 2% (wt/vol) top and a 3% (wt/vol) bottom layer, would create an inhomogenous tissue construct with distinct material properties in conjoined regions. The biochemical and mechanical development of these constructs was observed alongside uniform 2% and 3% constructs. Initially, uniform 3% agarose disks had the highest bulk Young's modulus (E(Y) approximately 28 kPa) of all groups. After 28 days of culture in 20% FBS-containing media, however, uniform 2% chondrocyte-seeded constructs achieved the highest Young's modulus compared to bilayered and 3% agarose disks. Though all three groups contained similar GAG content ( approximately 1.5% ww), uniform 2% agarose disks on day 28 possessed the highest collagen content ( approximately 1% ww). Unlike in either homogeneous construct type, microscopic analysis of axial strain fields in bilayered constructs in response to applied static compression revealed two mechanically disparate regions on day 0: a softer 2% layer and a stiffer 3% layer. With time in culture, this inhomogeneity became less distinct, as indicated by increased continuity in both the local displacement field and local E(Y), and depended on the level of FBS supplementation of the feed media, with lower FBS concentrations (10%) more closely maintaining the original distinction of material properties. These results shed positive light on a layered agarose technique for the production of inhomogeneous bilayered chondrocyte-seeded agarose constructs with applications for investigations of chondrocyte mechanotransduction and for possible use in the tissue engineering of inhomogeneous articular cartilage constructs.

Animals↗

Osteocyte viability and regulation of osteoblast function in a 3D trabecular bone explant under dynamic hydrostatic pressure.

UNLABELLED: A new trabecular bone explant model was used to examine osteocyte-osteoblast interactions under DHP loading. DHP loading enhanced osteocyte viability as well as osteoblast function measured by osteoid formation. However, live osteocytes were necessary for osteoblasts to form osteoids in response to DHP, which directly show osteoblast-osteocyte interactions in this in vitro culture. INTRODUCTION: A trabecular bone explant model was characterized and used to examine the effect of osteocyte and osteoblast interactions and dynamic hydrostatic pressure (DHP) loading on osteocyte viability and osteoblast function in long-term culture. MATERIALS AND METHODS: Trabecular bone cores obtained from metacarpals of calves were cleaned of bone marrow and trabecular surface cells and divided into six groups, (1) live cores + dynamic hydrostatic pressure (DHP), (2) live cores + sham, (3) live cores + osteoblast + DHP, (4) live cores + osteoblast + sham, (5) devitalized cores + osteoblast + DHP, and (6) devitalized cores + osteoblast + sham, with four culture durations (2, 8, 15, and 22 days; n = 4/group). Cores from groups 3-6 were seeded with osteoblasts, and cores from groups 5 and 6 were devitalized before seeding. Groups 1, 3, and 5 were subjected to daily DHP loading. Bone histomorphometry was performed to quantify osteocyte viability based on morphology and to assess osteoblast function based on osteoid surface per bone surface (Os/Bs). TUNEL staining was performed to evaluate the mode of osteocyte death under various conditions. RESULTS: A portion of osteocytes remained viable for the duration of culture. DHP loading significantly enhanced osteocyte viability up to day 8, whereas the presence of seeded osteoblasts significantly decreased osteocyte viability. Cores with live osteocytes showed higher Os/Bs compared with devitalized cores, which reached significant levels over a greater range of time-points when combined with DHP loading. DHP loading did not increase Os/Bs in the absence of live osteocytes. The percentage of apoptotic cells remained the same regardless of treatment or culture duration. CONCLUSION: Enhanced osteocyte viability with DHP suggests the necessity of mechanical stimulation for osteocyte survival in vitro. Furthermore, osteocytes play a critical role in the transmission of signals from DHP loading to modulate osteoblast function. This explant culture model may be used for mechanotransduction studies in long-term cultures.

Animals↗

A paradigm for functional tissue engineering of articular cartilage via applied physiologic deformational loading.

Deformational loading represents a primary component of the chondrocyte physical environment in vivo. This review summarizes our experience with physiologic deformational loading of chondrocyte-seeded agarose hydrogels to promote development of cartilage constructs having mechanical properties matching that of the parent calf tissue, which has a Young's modulus E(Y) = 277 kPa and unconfined dynamic modulus at 1 Hz G* = 7 MPa. Over an 8-week culture period, cartilage-like properties have been achieved for 60 x 10(6) cells/ml seeding density agarose constructs, with E(Y) = 186 kPa, G* = 1.64 MPa. For these constructs, the GAG content reached 1.74% ww and collagen content 2.64% ww compared to 2.4% ww and 21.5% ww for the parent tissue, respectively. Issues regarding the deformational loading protocol, cell-seeding density, nutrient supply, growth factor addition, and construct mechanical characterization are discussed. In anticipation of cartilage repair studies, we also describe early efforts to engineer cylindrical and anatomically shaped bilayered constructs of agarose hydrogel and bone (i.e., osteochondral constructs). The presence of a bony substrate may facilitate integration upon implantation. These efforts will provide an underlying framework from which a functional tissue-engineering approach, as described by Butler and coworkers (2000), may be applied to general cell-scaffold systems adopted for cartilage tissue engineering.

Algorithms↗

Cartilage interstitial fluid load support in unconfined compression following enzymatic digestion.

Interstitial fluid pressurization plays an important role in cartilage biomechanics and is believed to be a primary mechanism of load support in synovial joints. The objective of this study was to investigate the effects of enzymatic degradation on the interstitial fluid load support mechanism of articular cartilage in unconfined compression. Thirty-seven immature bovine cartilage plugs were tested in unconfined compression before and after enzymatic digestion. The peak fluid load support decreased significantly (p < 0.0001) from 84 +/- 10% to 53 +/- 19% and from 80 +/- 10% to 46 +/- 21% after 18-hours digestion with 1.0 u/mg-wet-weight and 0.7 u/mg-wet-weight of collagenase, respectively. Treatment with 0.1 u/ml of chondroitinase ABC for 24 hours also significantly reduced the peak fluid load support from 83 +/- 12% to 48 +/- 16% (p < 0.0001). The drop in interstitial fluid load support following enzymatic treatment is believed to result from a decrease in the ratio of tensile to compressive moduli of the solid matrix.

Animals↗

Role of cell-associated matrix in the development of free-swelling and dynamically loaded chondrocyte-seeded agarose gels.

Chondrocytes embedded in agarose and subjected to dynamic deformational loading produce a functional matrix with time in culture, but there is usually a delay in the development of significant differences compared to free swelling. In this study, we hypothesized that the initial presence of a cell-associated matrix would expedite construct development in response to dynamic deformational loading. Seeded samples with enzymatically isolated chondrocytes and chondrons (the chondrocyte and its pericellular matrix) and examined the effects of seeding density and dynamic loading on the development of tissue properties. At 60 million/ml, dynamic loading significantly augmented the development of material properties in chondrocyte- and chondron-seeded constructs. Biochemical content and histological analysis indicated that the deposition of GAG, link protein and collagens are affected by the pre-existing cell-associated matrix of the chondron-seeded samples. The pericellular matrix associated with the chondrons did not expedite the development of material properties in response to deformational loading, disproving our hypothesis. The relative concentration and distribution of matrix proteins may play a major role in the disparate responses observed for the chondrocyte- and chondron-seeded cultures. In further support of these findings, culturing chondrocytes in agarose for two weeks prior to the application of deformational loading also did not exhibit expedited construct development.

Adaptation, Physiological↗

Functional tissue engineering of chondral and osteochondral constructs.

Due to the prevalence of osteoarthritis (OA) and damage to articular cartilage, coupled with the poor intrinsic healing capacity of this avascular connective tissue, there is a great demand for an articular cartilage substitute. As the bearing material of diarthrodial joints, articular cartilage has remarkable functional properties that have been difficult to reproduce in tissue-engineered constructs. We have previously demonstrated that by using a functional tissue engineering approach that incorporates mechanical loading into the long-term culture environment, one can enhance the development of mechanical properties in chondrocyte-seeded agarose constructs. As these gel constructs begin to achieve material properties similar to that of the native tissue, however, new challenges arise, including integration of the construct with the underlying native bone. To address this issue, we have developed a technique for producing gel constructs integrated into an underlying bony substrate. These osteochondral constructs develop cartilage-like extracellular matrix and material properties over time in free swelling culture. In this study, as a preliminary to loading such osteochondral constructs, finite element modeling (FEM) was used to predict the spatial and temporal stress, strain, and fluid flow fields within constructs subjected to dynamic deformational loading. The results of these models suggest that while chondral ("gel alone") constructs see a largely homogenous field of mechanical signals, osteochondral ("gel bone") constructs see a largely inhomogeneous distribution of mechanical signals. Such inhomogeneity in the mechanical environment may aid in the development of inhomogeneity in the engineered osteochondral constructs. Together with experimental observations, we anticipate that such modeling efforts will provide direction for our efforts aimed at the optimization of applied physical forces for the functional tissue engineering of an osteochondral articular cartilage substitute.

Biocompatible Materials↗

Anatomically shaped osteochondral constructs for articular cartilage repair.

Few successful treatment modalities exist for surface-wide, full-thickness lesions of articular cartilage. Functional tissue engineering offers a great potential for the clinical management of such lesions. Our long-term hypothesis is that anatomically shaped tissue constructs of entire articular layers can be engineered in vitro on a bony substrate, for subsequent implantation. To determine the feasibility, this study investigated the development of bilayered scaffolds of chondrocyte-seeded agarose on natural trabecular bone. In a series of three experiments, bovine chondrocytes were seeded in (1) cylindrical bilayered constructs of agarose and bovine trabecular bone, 0.53 cm2 in surface area and 3.2 mm thick, and were cultured for up to 6 weeks; (2) chondrocyte-seeded anatomically shaped agarose constructs reproducing the human patellar articular layer (area=11.7 cm2, mean thickness=3.4 mm), cultured for up to 6 weeks; and (3) chondrocyte-seeded anatomically shaped agarose constructs of the patella (same as above) integrated into a corresponding anatomically shaped trabecular bone substrate, cultured for up to 2 weeks. Articular layer geometry, previously acquired from human cadaver joints, was used in conjunction with computer-aided design and manufacturing technology to create these anatomically accurate molds. In all experiments, chondrocytes remained viable over the entire culture period, with the agarose maintaining its shape while remaining firmly attached to the underlying bony substrate (when present). With culture time, the constructs exhibited positive type II collagen staining as well as increased matrix elaboration (Safranin O staining for glycosaminoglycans) and material properties (Young's modulus and aggregate modulus). Despite the use of relatively large agarose constructs partially integrated with trabecular bone, no adverse diffusion limitation effects were observed. Anatomically shaped constructs on a bony substrate may represent a new paradigm in the design of a functional articular cartilage tissue replacement.

Animals↗

Synergistic action of growth factors and dynamic loading for articular cartilage tissue engineering.

It has previously been demonstrated that dynamic deformational loading of chondrocyte-seeded agarose hydrogels over the course of 1 month can increase construct mechanical and biochemical properties relative to free-swelling controls. The present study examines the manner in which two mediators of matrix biosynthesis, the growth factors TGF-beta1 and IGF-I, interact with applied dynamic deformational loading. Under free-swelling conditions in control medium (C), the [proteoglycan content][collagen content][equilibrium aggregate modulus] of cell-laden (10 x 10(6) cells/mL) 2% agarose constructs reached a peak of [0.54% wet weight (ww)][0.16% ww][13.4 kPa]c, whereas the addition of TGF-beta1 or IGF-I to the control medium led to significantly higher peaks of [1.18% ww][0.97% ww][23.6 kPa](C-TGF) and [1.00% ww][0.63% ww][19.3 kPa](C-IGF), respectively, by day 28 or 35 (p<0.01). Under dynamic loading in control medium (L), the measured parameters were [1.10% ww][0.52% ww][24.5 kPa]L, and with the addition of TGF-beta1 or IGF-I to the control medium these further increased to [1.49% ww][1.07% ww][50.5 kPa](L-TGF) and [1.48% ww][0.81% ww][46.2 kPa](L-IGF), respectively (p<0.05). Immunohistochemical staining revealed that type II collagen accumulated primarily in the pericellular area under free-swelling conditions, but spanned the entire tissue in dynamically loaded constructs. Applied in concert, dynamic deformational loading and TGF-beta1 or IGF-I increased the aggregate modulus of engineered constructs by 277 or 245%, respectively, an increase greater than the sum of either stimulus applied alone. These results support the hypothesis that the combination of chemical and mechanical promoters of matrix biosynthesis can optimize the growth of tissue-engineered cartilage constructs.

Animals↗

Modeling of neutral solute transport in a dynamically loaded porous permeable gel: implications for articular cartilage biosynthesis and tissue engineering.

A primary mechanism of solute transport in articular cartilage is believed to occur through passive diffusion across the articular surface, but cyclical loading has been shown experimentally to enhance the transport of large solutes. The objective of this study is to examine the effect of dynamic loading within a theoretical context, and to investigate the circumstances under which convective transport induced by dynamic loading might supplement diffusive transport. The theory of incompressible mixtures was used to model the tissue (gel) as a mixture of a gel solid matrix (extracellular matrix/scaffold), and two fluid phases (interstitial fluid solvent and neutral solute), to solve the problem of solute transport through the lateral surface of a cylindrical sample loaded dynamically in unconfined compression with frictionless impermeable platens in a bathing solution containing an excess of solute. The resulting equations are governed by nondimensional parameters, the most significant of which are the ratio of the diffusive velocity of the interstitial fluid in the gel to the solute diffusivity in the gel (Rg), the ratio of actual to ideal solute diffusive velocities inside the gel (Rd), the ratio of loading frequency to the characteristic frequency of the gel (f), and the compressive strain amplitude (epsilon 0). Results show that when Rg > 1, Rd < 1, and f > 1, dynamic loading can significantly enhance solute transport into the gel, and that this effect is enhanced as epsilon 0 increases. Based on representative material properties of cartilage and agarose gels, and diffusivities of various solutes in these gels, it is found that the ranges Rg > 1, Rd < 1, correspond to large solutes, whereas f > 1 is in the range of physiological loading frequencies. These theoretical predictions are thus in agreement with the limited experimental data available in the literature. The results of this study apply to any porous hydrated tissue or material, and it is therefore plausible to hypothesize that dynamic loading may serve to enhance solute transport in a variety of physiological processes.

Animals↗

Influence of seeding density and dynamic deformational loading on the developing structure/function relationships of chondrocyte-seeded agarose hydrogels.

Chondrocytes cultured in agarose hydrogels develop a functional extracellular matrix. Application of dynamic strain at physiologic levels to these constructs over time can increase their mechanical properties. In this study, the effect of seeding density (20 and 60 x 10(6) cells/ml) on tissue elaboration was investigated. Higher seeding densities increased tissue properties in free-swelling culture, with constructs seeded at 20 and 60 x 10(6) cells/ml reaching maximum values over the 63 day culture period of aggregate modulus HA: 43 +/- 15 kPa, Young's modulus EY: 39 +/- 3 kPa, and glycosaminglycan content [GAG]: 0.96% +/- 0.13% wet weight; and HA: 58 +/- 12 kPa, EY: 60 +/- 5 kPa, and [GAG]: 1.49% +/- 0.26% wet weight, respectively. It was further observed that the application of daily dynamic deformational loading to constructs seeded at 20 x 10(6) cells/ml enhanced biochemical content (approximately 150%) and mechanical properties (approximately threefold) compared to free-swelling controls by day 28. However, at a concentration of 60 x 10(6) cells/ml, no difference in mechanical properties was found in loaded samples versus their free-swelling controls. Multiple regression analysis showed that the mechanical properties of the tissue constructs depend more strongly on collagen content than GAG content; a finding that is more pronounced with the application of daily dynamic deformational loading. Our findings provide evidence for initial cell seeding density and nutrient accessibility as important parameters in modulating tissue development of engineered constructs, and their ability to respond to a defined mechanical stimulus.

Animals↗

Dynamic deformational loading results in selective application of mechanical stimulation in a layered, tissue-engineered cartilage construct.

The application of dynamic physiologic loading to a bilayered chondrocyte-seeded agarose construct with a 2% (wt/vol) top layer and 3% (wt/vol) bottom layer was hypothesized to (1) improve overall construct properties and (2) result in a tissue that mimics the mechanical inhomogeneity of native cartilage. Dynamic loading over the 28 day culture period was found to significantly increase bulk mechanical and biochemical properties versus free-swelling culture. The initial depth-distribution of the compressive Young's modulus (EY) reflected the intrinsic properties of the gel in each layer and a similar trend to the native tissue, with a softer 2% gel layer and a much stiffer 3% gel layer. After 28 days in culture, free-swelling conditions maintained this general trend while loaded constructs possessed a reverse profile, with significant increases in EY observed only in the 2% gel. Histological analysis revealed preferential matrix formation in the 2% agarose layer, with matrix localized more pericellularly in the 3% agarose layer. Finite element modeling revealed that, prior to significant matrix elaboration, the 2% layer experiences increased mechanical stimuli (fluid flow and compressive strain) during loading that may enhance chondrocyte stimulation and nutrient transport in that layer, consistent with experimental observations. From these results, we conclude that due to the limitations in 3% agarose, the use of this type of bilayered construct to construct depth-dependent inhomogeneity similar to the native tissue is not likely to be successful under long-term culture conditions. Our study underscores the importance of other physical properties of the scaffold that may have a greater influence on interconnected tissue formation than intrinsic scaffold stiffness.

Animals↗