Search PubMed⌕ Search

Biomedical subjects

Robert J Mitchell

Publications and source records attributed to Robert J Mitchell.

17 recordsLinked to original sources

Transcript levels of the intermediate size or grey zone fragile X mental retardation 1 alleles are raised, and correlate with the number of CGG repeats.

BACKGROUND: Grey zone or intermediate alleles are one of the three recognised classes of the X-linked fragile X mental retardation 1 (FMR1) gene showing intergenerational instability. These classes are defined according to the number of CGG repeats in the FMR1 5'-untranslated region. Although large CGG expansions (>200 repeats) cause a neurodevelopmental anomaly through silencing of the gene, resulting in a deficit of FMR1 specific protein, smaller expansions (approximately 55-200 repeats) are associated with an increased transcription and late-onset specific phenotypes. Those alleles with a CGG repeat number ranging between approximately 41 and 55 are relatively poorly defined with regard to both transcriptional and translational activity, and also potential phenotypic effects. METHODS AND RESULTS: Based on a sample of 33 males carrying FMR1 alleles within the grey zone range, defined here as 41-60 CGGs, we show an increased transcriptional activity relative to that seen in common alleles (5-40 CGGS). This is the first study to report a significant relationship between FMR1 mRNA levels and CGG repeat number within the grey zone range (p<0.001). From a piecewise linear regression model, the threshold for onset of the increase in mRNA levels as a function of CGG repeat size has been determined at approximately 39 repeats (standard error (SE) 3.24), and that for the reduction in the rate of this increase at approximately 54 repeats (SE 4.27). CONCLUSIONS: The ambiguities associated with the definition and transcription dynamics of the FMR1 gene within the grey zone range are dealt with. There may be specific phenotypes associated with the toxic "gain-of-function" effect of raised mRNA.

5' Untranslated Regions↗

Characterization and optimization of two methods in the immobilization of 12 bioluminescent strains.

Twelve recombinant bioluminescent bacteria have been immobilized within the wells of a 96-well plate using two different matrices--agar and sol-gel. All 12 strains were immobilized within individual wells of the plates and the sensitivity of the strains and the stability of the responses were determined for select chemicals. Each strain was exposed to seven well-characterized chemicals over a wide range of concentrations to demonstrate their individual selectivity for specific toxicants. Although the sensitivity of the immobilized cells was generally lower than cultures grown in liquid media, they were comparable. For example, strain DPD1710, which responds to DNA damage was able to detect mitomycin C, a genotoxin, at a minimum concentration of 0.6 ppb. When immobilized, the lower limit of detection was between 1 and 10 ppb. Finally, using compounds that are known to elicit a response from each of the strains, the stability of the bioluminescent responses were measured over an extended period of 4 weeks. Although the activity of several strains decreased over time, the majority of the strains used in both immobilized systems were still responsive.

Aliivibrio fischeri↗

Measuring external mycelia production of ectomycorrhizal fungi in the field: the soil matrix matters.

Assessing mycorrhizal fungi production in field settings has been hindered by the inability to measure external mycelia. Recently, external mycelia production was measured in the field using a novel in-growth core technique with acid-washed sand as the in-growth matrix. Here, we tested the assumption that external mycelia production in acid-washed sand is representative of that in native soil. External mycelia production was estimated as the difference in fungal growth between closed (allowing only saprotrophic fungal production) and open (allowing mycorrhizal and saprotrophic fungal production) cores using a factorial design of soil matrices (acid-washed sand vs native) and fertilization treatments (control vs nitrogen (N)) in a longleaf pine (Pinus palustris) plantation. In native soils, the ectomycorrhizal to saprotrophic fungal biomass signal was strong and consistent facilitating the assessment of external mycelia production, which was 300% higher than corresponding rates in acid-washed sand and inversely correlated with soil N. These results demonstrate the efficacy and importance of using native soil as the in-growth matrix to measure ectomycorrhizal fungi external mycelia production in field settings.

Ergosterol↗

A cell array biosensor for environmental toxicity analysis.

In this study, a cell-based array technology that uses recombinant bioluminescent bacteria to detect and classify environmental toxicity has been implemented to develop two biosensor arrays, i.e., a chip and a plate array. Twenty recombinant bioluminescent bacteria, having different promoters fused with the bacterial lux genes, were immobilized within LB-agar. About 2 microl of the cell-agar mixture was deposited into the wells of either a cell chip or a 384-well plate. The bioluminescence (BL) from the cell arrays was measured with the use of highly sensitive cooled CCD camera that measured the bioluminescent signal from the immobilized cells and then quantified the pixel density using image analysis software. The responses from the cell arrays were characterized using three chemicals that cause either superoxide damage (paraquat), DNA damage (mitomycin C) or protein/membrane damage (salicylic acid). The responses were found to be dependent upon the promoter fused upstream of the lux operon within each strain. Therefore, a sample's toxicity can be analyzed and classified through the changes in the BL expression from each well. Moreover, a time of only 2 h was needed for analysis, making either of these arrays a fast, portable and economical high-throughput biosensor system for detecting environmental toxicities.

Arabidopsis Proteins↗

Measuring tree root respiration using (13)C natural abundance: rooting medium matters.

Tree root respiration utilizes a major portion of the primary production in forests and is an important process in the global carbon cycle. Because of the lack of ecologically relevant methods, tree root respiration in situ is much less studied compared with above-ground processes such as photosynthesis and leaf respiration. This study introduces a new (13)C natural tracer method for measuring tree root respiration in situ. The method partitions tree root respiration from soil respiration in buried root chambers. Rooting media substantially influenced root respiration rates. Measured in three media, the fine root respiration rates of longleaf pine were 0.78, 0.27 and 0.18 mg CO(2) carbon mg(-1) root nitrogen d(-1) at 25 degrees C in the native soil, tallgrass prairie soil, and sand-vermiculite mixture, respectively. Compared with the root excision method, the root respiration rate of longleaf pine measured by the field chamber method was 18% higher when using the native soil as rooting medium, was similar in the prairie soil, but was 42% lower if in the sand-vermiculite medium. This natural tracer method allows the use of an appropriate rooting medium and is capable of measuring root respiration nondestructively in natural forest conditions.

Carbon Isotopes↗

Construction and evaluation of nagR-nagAa::lux fusion strains in biosensing for salicylic acid derivatives.

The NagR protein is a response regulatory protein found in the bacterium Ralstonia sp. U2 that is involved in sensing for salicylic acid and the subsequent induction of the operon just upstream of its gene. The genes encoded for in this operon are involved in the degradation of salicylic acid. Escherichia coli strain RFM443 carrying a fusion of the Photorhabdus luminescens luxCDABE operon with the nagR gene and upstream region of the nagAa gene was constructed and characterized with respect to its optimum temperature, its response time and kinetics, and its ability to detect numerous benzoic acid derivatives. Although capable of detecting 0.5 mM salicylic acid at any temperature between 28 and 40 degrees C, this E. coli strain, labeled DNT5, showed its greatest relative activity at 30 degrees C, i.e., the temperature at which the largest induction was seen. Furthermore, experiments done with numerous benzoic acid derivatives found the NagR protein to be responsive to only a few of the compounds tested, including salicylic acid and 3-methyl salicylic acid, and acetyl salicylic acid was the strongest inducer. The lower limits of detection for these compounds with E. coli strain DNT5 were also established, with the native inducer, salicylic acid, giving the most sensitive response and detectable down to a concentration of about 2 microM. A second lux fusion plasmid was also constructed and transformed into an NahR background, Pseudomonas putida KCTC1768. Within this strain, NAGK-1768, the supplemental activity of the NahR protein on the nagAa promoter, was shown to extend both the range of chemicals detected and the sensitivity.

Benzene↗

Beware of the possibility of fingerprinting techniques transferring DNA.

Fingerprinting brushes have the potential to collect and transfer DNA during powdering. Squirrel-hair fingerprint brushes exposed to specific sets of saliva stains and brushes used in routine casework were tested for their ability to collect and transfer DNA containing material using standard DNA extraction procedures and AmpFlSTR Profiler Plus amplification and typing procedures. The tests found that the risk of transferring DNA during powdering and having a detrimental impact on the analysis increases if the examiner powders over either biological stains (such as blood or saliva) or very fresh prints and uses more sensitive PCR amplification and typing procedures. We advocate caution when powdering prints from which DNA may also be collected and provide options for consideration to limit the risk of transferred DNA contamination while fingerprinting.

Blood↗

Enhancement of the multi-channel continuous monitoring system through the use of Xenorhabdus luminescens lux fusions.

The enhancement of the multi-channel continuous toxicity monitoring system developed previously was studied. To achieve better and more stable results from the system, the use of thermo-lux fusion strains that express the luxCDABE genes from Xenorhabdus luminescens was evaluated. A total of six recombinant Escherichia coli strains with the promoters from three oxidative-stress responsive genes, i.e. the katG, sodA and pqi-5 genes, fused to either the lux genes from Vibrio fischeri or X. luminescens were characterized and their responses to different chemicals compared. It was found that the basal level bioluminescence (BL) from the thermo-lux fusion strains was always higher while that of the V. fischeri lux strains were always near or below the lower limit of detection of the system. For example, the katG::V. fischeri lux strain, DPD2511, gave no discernible response due to its low level expression while a fusion of the katG promoter with the X. luminescens lux operon was clearly responsive and capable of detecting hydrogen peroxide down to about 1 ppm. The use of the thermo-lux strains found them to be as sensitive as the V. fischeri lux strains while providing a brighter, more stable basal level bioluminescence, making the analysis and monitoring of water-borne toxicity more reliable.

Aliivibrio fischeri↗

Fine root branch orders respond differentially to carbon source-sink manipulations in a longleaf pine forest.

Fine roots are a key component of carbon (C) flow and nitrogen (N) cycling in forest ecosystems. However, the complexity and heterogeneity of the fine root branching system have hampered the assessment and prediction of C and N dynamics at ecosystem scales. We examined how root morphology, biomass, and chemistry differed with root branch orders (1-5 with root tips classified as first order roots) and how different root orders responded to increased C sink strength (via N fertilization) and reduced carbon source strength (via canopy scorching) in a longleaf pine (Pinus palustris L.) ecosystem. With increasing root order, the diameter and length of individual roots increased, whereas the specific root length decreased. Total root biomass on an areal basis was similar among the first four orders but increased for the fifth order roots. Consequently, total root length and total root surface area decreased systematically with increasing root order. Fine root N and lignin concentrations decreased, while total non-structural carbohydrate (TNC) and cellulose concentrations increased with increasing root order. N addition and canopy disturbance did not alter root morphology, but they did influence root chemistry. N fertilization increased fine root N concentration and content per unit area in all five orders, while canopy scorching decreased root N concentration. Moreover, TNC concentration and content in fifth order roots were also reduced by canopy scorching. Our results indicate that the small, fragile, and more easily overlooked first and second order roots may be disproportionately important in ecosystem scale C and N fluxes due to their large proportions of fine root biomass, high N concentrations, relatively short lifespans, and potentially high decomposition rates.

Biomass↗

Construction and characterization of novel dual stress-responsive bacterial biosensors.

Using the genes for the green fluorescence protein and Xenorhabdus luminescens luciferase operon and the promoters for the recA and katG genes, two stress-responsive Escherichia coli biosensor strains have been constructed that can individually or concurrently respond to oxidative and genotoxic conditions. Strain DUO-1 carries the pRGDK1 plasmid, which has the recA::GFPuv4 and katG::luxCDABE fusion genes oriented divergently with each other, while in DUO-2, i.e., pRGDK2, they are in a tandem orientation, with the recA promoter showing run-though transcription of the katG::luxCDABE fusion. These two strains and their responses were characterized using several known hydroxyl radical-forming chemicals, e.g., hydrogen peroxide and cadmium chloride, along with some genotoxins, e.g., mitomycin C and methyl-N-nitro-N-nitrosoguanidine, and some general toxicants. Both strains showed an induction of green fluorescent protein (GFP) and bioluminescence when they experienced DNA and oxidative damage, respectively, while the tandem orientation of the two fusion genes within DUO-2 allowed it to also sensitively respond to genotoxins via the production of bioluminescence. However, the characteristics of DUO-2's bioluminescent response to each stress were easily distinguishable, making it useful for the detection of both stresses. Furthermore, tests with mixtures of chemicals showed that both DUO-1 and DUO-2 were responsive when chemicals causing oxidative or genotoxic stress were present as a single chemical or within complex chemical mixtures.

Antibiotics, Antineoplastic↗

Whole-cell-based biosensors for environmental biomonitoring and application.

A variety of whole-cell-based biosensors has been developed using numerous native and recombinant biosensing cells. The use of reporter genes, for example bacterial luciferase and gfp, to monitor gene expression is discussed in terms of each reporters' benefits and disadvantages, including their possible use on-line, their sensitivity, the need for extra substrate, etc. All biosensing cells in use can be classified into two groups in terms of their biosensing mechanisms--constitutive expression and stress- or chemical-specific inducible expression. In this review several examples of each are presented and discussed. The use of recombinant whole-cell biosensors in the field requires three components--biosensing cells, a measurement device, and a signal-transducing apparatus, the last two depending on the first and the final applications of the system. The use of different immobilization techniques in several studies to maintain the cells and their viability is also discussed, in particular their use in the development of both high-throughput and chip-based biosensing systems. Finally the application of whole-cell-based biosensors to different environmental media, such as water, soil, and atmospheric monitoring is discussed; particular attention is given to their use for detection of various stressors, including dioxins, endocrine-disrupting chemicals, and ionizing radiation.

Biosensing Techniques↗

Assessing variation in the radial profile of sap flux density in Pinus species and its effect on daily water use.

We monitored sap flux density (v) diurnally in nine mature southeastern pine (Pinus spp.) trees with a thermal dissipation probe that spanned the sapwood radius. We found the expected pattern of high v near the cambium and decreasing v with depth toward the center of the tree; however, the pattern was not constant within a day or between trees. Radial profiles of trees were steeper earlier in the day and became less steep later in the day. As a result, time-dependent changes in the shape of the radial profile of v were sometimes correlated with daily changes in evaporative demand. As the radial profile became less steep, the inner xylem contributed relatively more to total tree sap flow than it did earlier in the day. We present a 3-parameter Gaussian function that can be used to describe the radial distribution of v in trees. Parameters in the function represent depth in the xylem from the cambium, maximum v, depth in the xylem where maximum v occurs, and the rate of radial change in v with radial depth (beta). Values of beta varied significantly between trees and with time, and were sometimes correlated with air vapor pressure deficit (D). We hypothesize that this occurred during periods of high transpiration when the water potential gradient became great enough to move water in the inner sapwood despite its probable high hydraulic resistance. We examined discrepancies among estimates of daily water use based on single-point, two-point and multi-point (i.e., every 20 mm in the sapwood) measurements. When radial distribution of v was not considered, a single-point measurement resulted in errors as large as 154% in the estimate of daily water use relative to the estimate obtained from a multi-point measurement. Measuring v at two close sample points (10 and 30 mm) did not improve the estimate; however, estimates derived from v measured at two distant sample points (10 and 70 mm) significantly improved the estimate of daily water use, although errors were as great as 32% in individual trees. The variability in v with depth in the xylem, over time, and between trees indicates that measurements of the radial distribution of v are necessary to accurately estimate water flow in trees with large sapwood areas.

Circadian Rhythm↗

Stomatal sensitivity to vapor pressure deficit and its relationship to hydraulic conductance in Pinus palustris.

We studied the response of stomatal conductance at leaf (gS) and canopy (GS) scales to increasing vapor pressure deficit (D) in mature Pinus palustris Mill. (longleaf pine) growing in a sandhill habitat in the coastal plain of the southeastern USA. Specifically, we determined if variation in the stomatal response to D was related to variation in hydraulic conductance along the soil-to-leaf pathway (KL) over the course of a growing season. Reductions in KL were associated with a severe growing season drought that significantly reduced soil water content (theta) in the upper 90-cm soil profile. Although KL recovered partially following the drought, it never reached pre-drought values. Stomatal sensitivity to D was well correlated with maximum gS at low D at both leaf and canopy scales, and KL appeared to influence this response by controlling maximum gS. Our results are consistent with the hypothesis that stomatal response to D occurs to regulate minimum leaf water potential, and that the sensitivity of this response is related to changes in whole-plant hydraulics.

Pinus↗

Diurnal and seasonal variability in the radial distribution of sap flow: predicting total stem flow in Pinus taeda trees.

We monitored the radial distribution of sap flux density (v; g H2O m(-2) s(-1)) in the sapwood of six plantation-grown Pinus taeda L. trees during wet and dry soil periods. Mean basal diameter of the 32-year-old trees was 33.3 cm. For all trees, the radial distribution of sap flow in the base of the stem (i.e., radial profile) was Gaussian in shape. Sap flow occurred maximally in the outer 4 cm of sapwood, comprising 50-60% of total stem flow (F), and decreased toward the center, with the innermost 4 cm of sapwood (11-15 cm) comprising less than 10% of F. The percent of flow occurring in the outer 4 cm of sapwood was stable with time (average CV < 10%); however, the percentage of flow occurring in the remaining sapwood was more variable over time (average CV > 40%). Diurnally, the radial profile changed predictably with time and with total stem flow. Seasonally, the radial profile became less steep as the soil water content (theta) declined from 0.38 to 0.21. Throughout the season, daytime sap flow also decreased as theta decreased; however, nighttime sap flow (an estimate of stored water use) remained relatively constant. As a result, the percentage of stored water use increased as theta declined. Time series analysis of 15-min values of F, theta, photosynthetically active radiation (PAR) and vapor pressure deficit (D) showed that F lagged behind D by 0-15 min and behind PAR by 15-30 min. Diurnally, the relationship between F and D was much stronger than the relationship between F and PAR, whereas no relationship was found between F and theta. An autoregressive moving average (ARIMA) model estimated that 97% of the variability in F could be predicted by D alone. Although total sap flow in all trees responded similarly to D, we show that the radial distribution of sap flow comprising total flow could change temporally, both on daily and seasonal scales.

Circadian Rhythm↗

Spatio-temporal patterns of soil available nutrients following experimental disturbance in a pine forest.

Although disturbance is known to alter soil nutrient heterogeneity, it remains unclear whether spatial patterns in soil nutrients after disturbance follow predictable temporal changes that reflect underlying processes. This study examined the effects of tree harvesting and girdling on overall variability, geostatistical patterns, and resource congruence of soil available nutrients in a mature Pinus elliottii Engelm. forest. The two disturbances led to different patterns of vegetation removal, forest floor redistribution, and revegetation, but showed similar post-disturbance changes in overall soil nutrient variability. Soil nutrient variability increased after both disturbances by more than 5-fold, and then decreased, returning to the undisturbed level in 4 years. Spatial structures assessed using geostatistics did not show predictable temporal trends. However, girdled plots showed more persistent spatial structures in soil nutrients than harvested plots, and had semivariogram ranges mostly equal to or less than 10 m, reflecting effects of persistent and spatially stable patches of undisturbed hardwoods that had an average patch size of 10 m. Resource congruence examined with Spearman rank correlations was nil before disturbance, increased after disturbance and then became nil again by the 4th year post-disturbance. The timing of the increase was related to treatment, occurring in the 1st year after disturbance in the girdled plots, but not until the 2nd year in the harvested plots. These two patterns of congruence were potentially caused by different rates of nutrient patch formation and resource uptake by plants during early succession. Although temporal changes in soil heterogeneity have been documented previously, the present study indicates that temporal trends in nutrient variability after disturbance may be predictable, and that the marked changes in spatio-temporal patterns of soil nutrients as a result of disturbance are ephemeral.

Ecosystem↗

Controls of fine root dynamics across a gradient of gap sizes in a pine woodland.

Controls of fine dynamics were investigated in a Pinus palustris Mill. (longleaf pine) woodland subjected to two understory vegetation treatments (control versus removed) and four overstory treatments (no gap control, and canopy gaps of three sizes with constant total gap area per stand). Fine root (<2 mm diameter) dynamics were measured over 11 months using ingrowth cores (all treatments) and minirhizotrons (understory removed in no gap control and large gap treatments only). At the fine (microsite) spatial scale, pine and non-pine root mass production responded negatively to each other (P=0.033). Each life form was significantly (P< or =0.028) related to nearby overstory density, and pine root production compensated for reductions in non-pine roots if understory vegetation was removed. Soil moisture and NO(3) mineralization rate were negatively related to pine root mass production (ingrowth cores; P<0.001 and P=0.052) and positively related to pine root length production, mortality and turnover (minirhizotrons; P from <0.001 to 0.078). Temperature variance was negatively related to pine root lifespan P<0.001) and positively related to pine root turnover (P=0.003). At the ecosystem scale, pattern of overstory disturbance (gap size and number) had no significant effect on non-pine, pine, or total root production. However, the presence of gaps (versus the no-gap control) increased non-pine root mass production (ANOVA, P=0.055) in natural understory conditions, and reduced pine root mass production (P=0.035) where the understory was removed. Ecosystem-wide pine root length production, mortality and turnover were positively related to weekly soil temperature (P< or =0.02). In natural systems, fine root dynamics are highly variable and strongly affected by biotic factors. Roots quickly close belowground gaps because one life form (pine or non-pine) compensates for the absence of the other. When understory vegetation is removed, however, pine roots respond to the local abiotic environment, particularly moisture and NO(3).

Biomass↗

Nitrate distributions and source identification in the Abbotsford-Sumas Aquifer, northwestern Washington State.

The Abbotsford-Sumas Aquifer is a shallow, predominantly unconfined aquifer that spans regions in southwestern British Columbia, Canada and northwestern Washington, USA. The aquifer is prone to nitrate contamination because of extensive regional agricultural practices. A 22-month ground water nitrate assessment was performed in a 10-km2 study area adjacent to the international boundary in northwestern Washington to examine nitrate concentrations and nitrogen isotope ratios to characterize local source contributions from up-gradient sources in Canada. Nitrate concentrations in excess of 10 mg nitrate as nitrogen per liter (mg N L(-1)) were observed in ground water from most of the 26 domestic wells sampled in the study area, and in a creek that dissects the study area. The nitrate distribution was characteristic of nonpoint agricultural sources and consistent with the historical documentation of agriculturally related nitrate contamination in many parts of the aquifer. Hydrogeologic information, nitrogen isotope values, and statistical analyses indicated a nitrate concentration stratification in the study area. The highest concentrations (> 20 mg N L(-1)) occurred in shallow regions of the aquifer and were linked to local agricultural practices in northwestern Washington. Nitrate concentrations in excess of 10 mg N L(-1) deeper in the aquifer (> 10 m) were related to agricultural sources in Canada. The identification of two possible sources of ground water nitrate in northwestern Washington adds to the difficulty in assessing and implementing local nutrient management plans for protecting drinking water in the region.

Agriculture↗