Search PubMed⌕ Search

Biomedical subjects

Richard L McCreery

Publications and source records attributed to Richard L McCreery.

15 recordsLinked to original sources
PubMed2007

Electronic characteristics of fluorene/TiO2 molecular heterojunctions.

The electronic properties of molecular junctions of the general type carbon/molecule/TiO2Au were examined as examples of "molecular heterojunctions" consisting of a molecular monolayer and a semiconducting oxide. Junctions containing fluorene bonded to pyrolyzed photoresist film (PPF) were compared to those containing Al2O3 instead of fluorene, and those with only the TiO2 layer. The responses to voltage sweep and pulse stimulation were strongly dependent on junction composition and temperature. A transient current response lasting a few milliseconds results from injection and trapping of electrons in the TiO2 layer, and occurred in all three junction types studied. Conduction in PPFTiO2Au junctions is consistent with space charge limited conduction at low voltage, then a sharp increase in current once the space charge fills all the traps. With fluorene present, there is a slower, persistent change in junction conductance which may be removed by a reverse polarity pulse. This "memory" effect is attributed to a redox process in the TiO2 which generates TiIII and/or TiII, which have much higher conductance than TiO2 due to the presence of conduction band electrons. The redox process amounts to "dynamic doping" of the TiO2 layer by the imposed electric field. The memory effect arises from a combination of the properties of the molecular and oxide layers, and is a special property of the molecular heterojunction configuration.

Journal Article↗
PubMed2006

Redox-driven conductance switching via filament formation and dissolution in carbon/molecule/TiO2/Ag molecular electronic junctions.

Carbon/molecule/TiO2/Au molecular electronic junctions show robust conductance switching, in which a metastable high conductance state may be induced by a voltage pulse which results in redox reactions in the molecular and TiO2 layers. When Ag is substituted for Au as the "top contact", dramatically different current/voltage curves and switching behavior result. When the carbon substrate is biased negative, an apparent breakdown occurs, leading to a high conductance state which is stable for at least several hours. Upon scanning to positive bias, the conductance returns to a low state, and the cycle may be repeated hundreds of times. Similar effects are observed when Cu is substituted for Au and for three different molecular layers as well as "control" junctions of the type carbon/TiO2/Ag/Au. The polarity of the "switching" is reversed when the Ag layer is between the carbon and molecular layers, and the conductance change is suppressed at low temperature. Pulse experiments show very erratic transitions between high and low conductivity states, particularly near the switching threshold. The results are consistent with a switching mechanism based on Ag or Cu oxidation, transport of their ions through the TiO2, and reduction at the carbon to form a metal filament.

Carbon↗
PubMed2006

Electron transport and redox reactions in carbon-based molecular electronic junctions.

A unique molecular junction design is described, consisting of a molecular mono- or multilayer oriented between a conducting carbon substrate and a metallic top contact. The sp2 hybridized graphitic carbon substrate (pyrolyzed photoresist film, PPF) is flat on the scale of the molecular dimensions, and the molecular layer is bonded to the substrate via diazonium ion reduction to yield a strong, conjugated C-C bond. Molecular junctions were completed by electron-beam deposition of copper, titanium oxide, or aluminium oxide followed by a final conducting layer of gold. Vibrational spectroscopy and XPS of completed junctions showed minimal damage to the molecular layer by metal deposition, although some electron transfer to the molecular layer resulted in partial reduction in some cases. Device yield was high (>80%), and the standard deviations of junction electronic properties such as low voltage resistance were typically in the range of 10-20%. The resistance of PPF/molecule/Cu/Au junctions exhibited a strong dependence on the structure and thickness of the molecular layer, ranging from 0.13 ohms cm2 for a nitrobiphenyl monolayer, to 4.46 ohms cm2 for a biphenyl monolayer, and 160 ohms cm2 for a 4.3 nm thick nitrobiphenyl multilayer. Junctions containing titanium or aluminium oxide had dramatically lower conductance than their PPF/molecule/Cu counterparts, with aluminium oxide junctions exhibiting essentially insulating behavior. However, in situ Raman spectroscopy of PPF/nitroazobenzene/AlO(x)/Au junctions with partially transparent metal contacts revealed that redox reactions occurred under bias, with nitroazobenzene (NAB) reduction occurring when the PPF was biased negative relative to the Au. Similar redox reactions were observed in PPF/NAB/TiO(x)/Au molecular junctions, but they were accompanied by major effects on electronic behavior, such as rectification and persistent conductance switching. Such switching was evident following polarization of PPF/molecule/TiO2/Au junctions by positive or negative potential pulses, and the resulting conductance changes persisted for several minutes at room temperature. The "memory" effect implied by these observations is attributed to a combination of the molecular layer and the TiO2 properties, namely metastable "trapping" of electrons in the TiO2 when the Au is negatively biased.

Carbon↗
PubMed2006

Determination of the structure and orientation of organic molecules tethered to flat graphitic carbon by ATR-FT-IR and Raman spectroscopy.

Mono- and multilayers of nitroazobenzene (NAB), azobenzene (AB), nitrobiphenyl (NBP), biphenyl (BP), and fluorene (FL) were covalently bonded to flat pyrolyzed photoresist films (PPF) by electrochemical reduction of their diazonium derivatives. The structure and orientation of the molecular layers were probed with ATR-FT-IR and Raman spectroscopy. A hemispherical germanium ATR element used with p-polarized light at 65 degrees incidence angle yielded high signal/noise IR spectra for monolayer coverage of molecules on PPF. The IR spectra are dominated by in-plane vibrational modes in the 1000-2000-cm(-1) spectral range but also exhibit weaker out-of-plane deformations in the 650-1000-cm(-1) region. The average tilt angle with respect to the surface normal for the various molecules varied from 31.0 +/- 4.5 degrees for NAB to 44.2 +/- 5.4 degrees for FL with AB, NBP, and BP exhibiting intermediate adsorption geometries. Raman intensity ratios of NAB and AB for p- and s-polarized incident light support the conclusion that the chemisorbed molecules are in a predominantly upright orientation. The results unequivocally indicate that molecules electroreduced from their diazonium precursors are not chemisorbed flat on the PPF surface, but rather at an angle, similar to the behavior of Au/thiol self-assembled monolayers, Langmuir-Blodgett films, and porphyrin molecules chemisorbed thermally on silicon and PPF from alkyne and alkene precursors.

Azo Compounds↗
PubMed2006

Carbon/molecule/metal molecular electronic junctions: the importance of "contacts".

Molecular electronic junctions fabricated by covalent bonding onto a graphitic carbon substrate were examined with Raman spectroscopy and characterized electronically. The molecular layer was a 4.5 nm thick multilayer of nitroazobenzene (NAB), and the top contact material was varied to investigate its effect on junction behavior. A 3.0 nm thick layer of copper, TiO2, or Al(III) oxide (AlO(x)) was deposited on top of the NAB layer, followed by a 7.0 nm thick layer of gold. Copper "contacts" yielded molecular junctions with low resistance and showed a strong dependence on molecular structure. Carbon/ NAB/AlO(x)/Au junctions exhibited high resistance, with current densities three orders of magnitude less than those for analogous Cu junctions. However, Raman spectroscopy revealed that the NAB layer was reduced when the carbon substrate was biased negative, to a product resembling that resulting from electrochemical reduction of NAB. Carbon/ NAB/TiO2/Au junctions showed rectifying J/V behavior, with high conductivity to electrons able to enter the TiO2 conduction band. Substitution of azobenzene for nitroazobenzene yielded junctions with similar spectroscopic and electronic behavior to NAB, indicating that the nitro group is not essential for rectification. The results are interpreted in terms of the energy levels of the molecule relative to those of TiO2. The combination of a covalently bonded molecular layer and a semiconducting oxide yields unusual electronic properties in a carbon/molecule/semiconductor/Au molecular junction.

Journal Article↗
PubMed2005

Covalent bonding of alkene and alkyne reagents to graphitic carbon surfaces.

Various aromatic and aliphatic alkynes and one alkene were covalently bonded to sp(2)-hybridized carbon surfaces by heat treatment in an argon atmosphere. X-ray photoelectron spectroscopy, Raman, and FTIR spectra of the modified surfaces showed that the molecules were intact after the 400 degrees C heat treatment but that the alkyne group had reacted with the surface to form a covalent bond. Alkynes with ferrocene and porphyrin centers exhibited chemically reversible voltammetric waves that could be cycled many times. Atomic force microscopy of the modified surfaces indicated a thickness of the molecular layer consistent with monolayer coverage, and surface coverage determined by voltammetry was also in the monolayer range. Raman spectroscopy of the porphyrin monolayers formed from a porphyrin alkyne showed no evidence for dimer formation, although multilayer formation may occur at undetected levels. FTIR spectra of the porphyrin-modified carbon surfaces were well-defined, similar to the parent molecule, and indicative of an average tilt angle between the porphyrin plane and the surface normal of 37 degrees . The bond between the molecular monolayer and the carbon surface was quite stable, withstanding sonication in tetrahydrofuran, mild aqueous acid and base, and repeated voltammetric cycling in propylene carbonate electrolyte. Heat treatment of alkynes and alkenes appears to be a generally useful method for modifying carbon surfaces, which can be applied to both aromatic and aliphatic molecules.

Journal Article↗
PubMed2005

Strong effects of molecular structure on electron transport in carbon/molecule/copper electronic junctions.

Carbon/molecule/copper molecular electronic junctions were fabricated by metal deposition of copper onto films of various thicknesses of fluorene (FL), biphenyl (BP), and nitrobiphenyl (NBP) covalently bonded to flat, graphitic carbon. A "crossed-wire" junction configuration provided high device yield and good junction reproducibility. Current/voltage characteristics were investigated for 69 junctions with various molecular structures and thicknesses and at several temperatures. The current/voltage curves for all cases studied were nearly symmetric, scan rate independent, repeatable at least thousands of cycles and exhibited negligible hysteresis. Junction conductance was strongly dependent on the dihedral angle between phenyl rings and on the nature of the molecule/copper "contact". Junctions made with NBP showed a decrease in conductivity of a factor of 1300 when the molecular layer thickness increased from 1.6 to 4.5 nm. The slope of ln(i) vs layer thickness for both BP and NBP was weakly dependent on applied voltage and ranged from 0.16 to 0.24 A(-1). These attenuation factors are similar to those observed for similar molecular layers on modified electrodes used to study electrochemical kinetics. All junctions studied showed weak temperature dependence in the range of approximately 325 to 214 K, implying activation barriers in the range of 0.06 to 0.15 eV. The carbon/molecule/copper junction structure provides a robust, reproducible platform for investigations of the dependence of electron transport in molecular junctions on both molecular structure and temperature. Furthermore, the results indicate that junction conductance is a strong function of molecular structure, rather than some artifact resulting from junction fabrication.

Journal Article↗
PubMed2004

In situ Raman spectroscopy of bias-induced structural changes in nitroazobenzene molecular electronic junctions.

Carbon/nitroazobenzene (NAB)/titanium/gold molecular electronic junctions with active thicknesses of 7-8 nm were constructed having partially transparent Ti/Au top contacts, which permitted in situ monitoring of molecular structure with Raman spectroscopy for applied biases between +3 and -3 V. Deposition of the Ti/Au top contacts resulted in spectral changes similar to those accompanying NAB reduction in a conventional spectroelectrochemical experiment. Upon application of +3 V (carbon relative to Ti), the spectrum indicated reoxidation of the NAB reduction product, and this redox cycle could be repeated at least three times. When a voltage excursion to -2 or -3 V occurred, the spectra indicated irreversible loss of the nitro group, and a dramatic but reversible decrease in Raman intensity over the entire shift range examined. Negative applied voltage causes formation of reduced NAB and a high oxidation state of titanium, while positive voltage forms oxidized NAB and injects electrons into the titanium oxide layer. The spectral changes were correlated with current/voltage curves in order to probe the mechanism of rectification and conductance switching reported previously. Overall, the combination of spectroscopic and voltammetric results implies a conduction mechanism involving both NAB and titanium oxide, possibly mediated by the injection of carriers into the semiconducting titanium oxide, or by reduction of an insulating titanium oxide to a more conductive form.

Journal Article↗
PubMed2004

Ultraflat carbon film electrodes prepared by electron beam evaporation.

A facile method for the preparation of thin-film carbon electrodes by electron beam evaporation onto highly doped silicon is presented. The physical and electrochemical properties of these films both before and after postdeposition pyrolysis are investigated. Raman spectroscopy establishes the amorphous structure of the nonpyrolyzed carbon films and confirms the formation of graphitic carbon after pyrolysis at 1000 degrees C. Scanning force microscopy reveals the root-mean-square roughness of nonpyrolyzed films to be approximately 1 A, while pyrolyzed films exhibit an increased roughness of approximately 4 A. The electrochemical behavior of the electrodes resembles glassy carbon, with measured heterogeneous electron-transfer rate constants among the highest measured for thin carbon films. These carbon film electrodes will potentially find applications in such fields as molecular electronics and scanning probe microscopy of adsorbed species.

Journal Article↗
PubMed2004

Characterization of carbon/nitroazobenzene/titanium molecular electronic junctions with photoelectron and Raman spectroscopy.

Molecular junctions consisting of nitroazobenzene (NAB) chemisorbed to a substrate of pyrolyzed photoresist film (PPF) and a top contact of vapor-deposited titanium were examined with Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). The thickness of the NAB layer varied from submonolayer to 4.5 nm, and a thin (1-3 nm) overlayer of Ti was deposited by electron beam deposition. Without Ti, the NAB surface Raman spectrum was sufficiently strong to observe previously unreported modes in the 500-1000-cm(-1) region, and the 1000-1700-cm(-1) region was sufficiently strong to observe the effects of metal deposition. Upon Ti deposition, the intensities of NAB modes associated with the nitro group decreased significantly, and the XPS indicated formation of a Ti-N bond. For the thicker NAB layers (1.9 and 4.5 nm), the intensities of the NO(2) Raman modes partially recovered over a several-day period, but they remain depressed or absent in the submonolayer sample. The results indicate a reaction between condensing Ti atoms and the terminal NO(2) group, probably to form a Ti-nitroso linkage between NAB and Ti. The result is a molecular junction with covalent bonding at both ends in the form of a C-C bond between PPF and NAB and a Ti-N bond to the top contact. The structural implications of the current results are interpreted in the context of recently reported functioning PPF/NAB/Ti molecular electronic junctions. In particular, the reaction between Ti and the nitro group appears to prevent short circuits resulting from incursion of Ti into the NAB layer.

Journal Article↗
PubMed2003

Performance of pyrolyzed photoresist carbon films in a microchip capillary electrophoresis device with sinusoidal voltammetric detection.

Pyrolyzed photoresist films (PPF) are introduced as planar carbon electrodes in a PDMS-quartz hybrid microchip device. The utility of PPF in electroanalytical applications is demonstrated by the separation and detection of various neurotransmitters. PPF is found to form a stable, low-capacitance, durable layer on quartz, which can then be used in conjunction with a microchip capillary electrophoretic device. Sinusoidal voltammetric detection at PPF electrodes is shown to be very sensitive, with a detection limit (S/N = 3) of 100 nM for dopamine, corresponding to a mass detection limit (S/N = 3) of 2 amol. The selectivity of analysis in the frequency domain is demonstrated by isolating each individual signal in a pair of analytes that are chromatographically unresolved. Effectively decoupling the electrophoresis and electrochemical systems allows the electrodes to be placed just inside the separation channel, which results in efficient separations (80 000-100 000 plates/m).

Journal Article↗
PubMed2003

Mono- and multilayer formation by diazonium reduction on carbon surfaces monitored with atomic force microscopy "scratching".

Contact mode atomic force microscopy (AFM) was used to intentionally scratch a monolayer deposited on a pyrolyzed photoresist film (PPF). The force was set to completely remove the monolayer but not to damage the underlying PPF surface. A line profile determined across the scratch with tapping mode AFM permitted determination of the monolayer thickness from the depth of the scratch. A statistical process was devised to avoid user bias in determining the monolayer thickness and was used to determine the thickness as a function of derivatization parameters. PPF surfaces modified by reduction of diazonium ions of stilbene, biphenyl, nitrobiphenyl, terphenyl, and nitroazobenzene (NAB) were scratched and their modification layer thicknesses determined. For single-scan derivatizations of 1 mM diazonium ions to -0.6 V versus Ag+/Ag, the biphenyl and stilbene monolayers exhibited thicknesses close to those expected for true monolayers. However, more extensive derivatization resulted in multilayers up to 6.3 nm thick for the case of NAB. Such multilayers imply that electrons are transmitted through the growing film during diazonium reduction, despite the fact that electron tunneling would not be expected to be operative over such long distances. The results are consistent with a conductance increase in the growing film, which yields a partially conductive layer that can support further diazonium ion reduction and additional layer growth.

Journal Article↗
PubMed2003

Modified carbon surfaces as "organic electrodes" that exhibit conductance switching.

Glassy carbon (GC) surfaces modified with monolayers of biphenyl and nitrobiphenyl molecules were examined as voltammetric electrodes for ferrocene, benzoquinone, and tetracyanoquinodimethane electrochemistry in acetonitrile. The modified electrodes exhibited slower electron transfer than unmodified GC, by factors that varied with the monolayer and redox system. However, after a negative potential excursion to approximately -2.0 V versus Ag+/Ag, the modified electrodes exhibited much faster electron-transfer kinetics, approaching those observed on unmodified GC. The effect is attributed to an apparently irreversible structural change in the biphenyl or nitrobiphenyl monolayer, which increases the rate of electron tunneling. The transition to the "ON" state is associated with electron injection into the monolayer similar to that observed in previous spectroscopic investigations and causes a significant decrease in the calculated HOMO-LUMO gap for the monolayer molecule. Once the monolayer is switched ON, it supports rapid electron exchange with outer-sphere redox systems, but not with dopamine, which requires adsorption to the GC surface. The increase in electron-transfer rate with electron injection is consistent with an increase in electron tunneling rate through the monolayer, caused by a significant decrease in tunneling barrier height. The ON electrode can reduce biphenyl- or nitrobiphenyldiazonium reagent in solution to permit formation of a second modification layer of biphenyl or nitrobiphenyl molecules. This "double derivatization" procedure was used to prepare tetraphenyl- and nitrotetraphenyl-modified electrodes, which exhibit significantly slower electron transfer than their biphenyl and nitrobiphenyl counterparts. A "switching" electrode may have useful properties for electroanalytical applications and possibly in electrocatalysis. In addition, the ON state represents an "organic electrode" in which electron transfer occurs at an interface between an organic conductor and a solution rather than an interface between a solution and a metal or carbon electrode.

Journal Article↗
PubMed2002

In situ raman spectroelectrochemistry of electron transfer between glassy carbon and a chemisorbed nitroazobenzene monolayer.

In situ Raman spectroscopy was used to monitor 4-nitroazobenzene (NAB) in an electrochemical cell, both as a free molecule and as a chemisorbed monolayer on a glassy carbon (GC) electrode surface. Reduction of free NAB exhibited two well-defined voltammetric couples in acetonitrile, and the accompanying spectral changes supported a mechanism involving two successive 1-e(-) transfers. Raman spectra of NAB chemisorbed to GC via diazonium ion reduction were obtained in acetonitrile with a high-sensitivity, line-focused CCD spectrometer. The chemisorbed NAB spectra were quite different from the free NAB spectra, and were sufficiently strong to monitor as a function of applied potential. In the potential range of +400 to -800 mV vs Ag/Ag(+), the intensity of the Raman bands associated with the phenyl-NO(2) moiety varied, implying an electronic interaction between the pi system of the graphitic substrate and the chemisorbed NAB molecules. Negative of -800 mV, a 1-e(-) voltammetric reduction peak was observed, which was reversible on the positive voltage scan. This peak was accompanied by significant spectral changes, particularly the loss of the N=N and NO(2) stretches. The spectra are consistent with formation of a quinoid structure containing a C=C double bond between the NAB and the graphitic surface. The electron transfer and spectral changes occurred over a wider potential range than expected for a conventional Nernstian equilibrium, but did not appear to be broadened by slow electron-transfer kinetics. The results imply a significant perturbation of electron transfer between the GC and the monolayer, caused by strong electronic coupling between the graphitic pi system and the NAB orbitals. Rather than a discrete electron transfer to a free molecule, the electron transfer to chemisorbed NAB is more gradual, and is presumably driven by the electric field at the electrode/solution interface.

Journal Article↗