Biomedical subjects

Ramanathan Ramnarayanan

Publications and source records attributed to Ramanathan Ramnarayanan.

3 recordsLinked to original sources

PubMed2004

Production of electricity during wastewater treatment using a single chamber microbial fuel cell.

Microbial fuel cells (MFCs) have been used to produce electricity from different compounds, including acetate, lactate, and glucose. We demonstrate here that it is also possible to produce electricity in a MFC from domestic wastewater, while atthe same time accomplishing biological wastewater treatment (removal of chemical oxygen demand; COD). Tests were conducted using a single chamber microbial fuel cell (SCMFC) containing eight graphite electrodes (anodes) and a single air cathode. The system was operated under continuous flow conditions with primary clarifier effluent obtained from a local wastewater treatment plant. The prototype SCMFC reactor generated electrical power (maximum of 26 mW m(-2)) while removing up to 80% of the COD of the wastewater. Power output was proportional to the hydraulic retention time over a range of 3-33 h and to the influent wastewater strength over a range of 50-220 mg/L of COD. Current generation was controlled primarily by the efficiency of the cathode. Optimal cathode performance was obtained by allowing passive air flow rather than forced air flow (4.5-5.5 L/min). The Coulombic efficiency of the system, based on COD removal and current generation, was < 12% indicating a substantial fraction of the organic matter was lost without current generation. Bioreactors based on power generation in MFCs may represent a completely new approach to wastewater treatment. If power generation in these systems can be increased, MFC technology may provide a new method to offset wastewater treatment plant operating costs, making advanced wastewater treatment more affordable for both developing and industrialized nations.

Bioelectric Energy Sources↗

PubMedDate not supplied

Split-pool method for synthesis of solid-state material combinatorial libraries.

The synthesis and analysis of inorganic material combinatorial libraries by the split-pool bead method were demonstrated at the proof-of-concept level. Millimeter-size spherical beads of porous gamma-alumina, a commonly used support material for heterogeneous catalysts, were modified with Al(13)O(4)(OH)(24)(H(2)O)(12)(7+) cations in order to promote irreversible adsorption of the anionic fluorescent dyes Cascade Blue, Lucifer Yellow, and Sulforhodamine 101. The compositions of individual beads were easily determined through three split-pool cycles using a conventional fluorescence plate reader. Small split-pool material libraries were made by adsorbing noble metal salts (H(2)PtCl(6), H(2)IrCl(6), and RhCl(3)) into the beads. Analysis of these beads by micro-X-ray fluorescence showed that quantitative adsorption of metal salts without cross-contamination of beads could be achieved at levels (0.3 wt % metal loading) relevant to heterogeneous catalysis. The method offers the potential for synthesis of rather large libraries of inorganic materials through relatively simple benchtop split-pool chemistry.

Journal Article↗

PubMedDate not supplied

Directed-sorting method for synthesis of bead-based combinatorial libraries of heterogeneous catalysts.

The synthesis and analysis of inorganic material combinatorial libraries by a directed-sorting, split-pool bead method was demonstrated. Directed-sorting, split-pool, metal-loaded libraries were synthesized by adsorbing metal salts (H2PtCl6, SnCl2, CuCl2, and NiCl2) and metal standards (Pt, Cu, Ni in HCl) onto 2-mg porous gamma-alumina beads in 96- or 384-well plates. A matrix algorithm for the synthesis of bead libraries treated each bead as a member of a row or column of a given matrix. Computer simulations and manual tracking of the sorting process were used to assess library diversity. The bead compositions were analyzed by energy-dispersive X-ray spectroscopy, X-ray fluorescence spectroscopy, electron probe microanalysis, inductively coupled plasma atomic emission spectroscopy, and inductively coupled plasma mass spectroscopy. The metal-loaded beads were analyzed by laser-activated membrane introduction mass spectroscopy (LAMIMS) for catalytic activity using methylcyclohexane dehydrogenation to toluene as a probe reaction. The catalytic activity of individual beads that showed minimal (approximately 20% of that of Pt on alumina) to high conversion could be determined semiquantitatively by LAMIMS. This method, therefore, provides an alternative to screening using microreactors for reactors that employ catalysts in the form of beads. The directed-sorting method offers the potential for synthesis of focused libraries of inorganic materials through relatively simple benchtop split-pool chemistry.

Catalysis↗