Biomedical subjects

R Müller

Publications and source records attributed to R Müller.

At least 37 records · Page 2Linked to original sources

PubMed2005

Age-related changes in trabecular bone microstructures: global and local morphometry.

INTRODUCTION: A recently developed method allows investigating trabecular bone on an elemental (rod/plate) level. With this method, it is possible to measure local morphometric parameters such as thickness or orientation directly on the extracted rods and plates. Age-related changes of trabecular microarchitecture can thus be investigated on an elemental level, which may help to improve the understanding of age-related bone failure mechanism as well as the effect of pharmaceutical intervention in the prevention of such fractures. METHODS: Autopsies from femoral heads (FH) and lumbar spine (LS) were analyzed by global morphometry. Additionally, the trabecular structures were decomposed into rods and plates for the analysis with local morphometry. These morphometric indices were related to age using an analysis of covariance to test for gender differences and linearity with age. RESULTS: In this study, age-related changes showed no gender but site differences. In LS, rods were thinned in aging and finally vanish from the structure, causing a transformation of the trabecular bone structure to longer and, on average, thicker rods. In FH, changes were expressed by a simultaneous thinning and loss of interconnecting trabeculae and perforation of plates leading to new plates and rods. Results were mostly in agreement with earlier findings using descriptive analysis of the aging process. CONCLUSION: Here we present for the first time preliminary quantitative evidence of changes in the local microstructure, i.e., individual rods and plates. Nevertheless, the number of samples was too small to make for ready conclusions. We conclude that the combination of local and global morphometry is a useful method for a detailed and quantitative description of age-related changes in bone microstructure.

Adult↗

PubMed2005

Structural aspects of metamagnetism in Ca2-xSrxRuO4: evidence for field tuning of orbital occupation.

The crystal structure of Ca(2-x)Sr(x)RuO(4) with 0.2 < or = x < or = 1.0 has been studied by diffraction techniques and by high resolution capacitance dilatometry as a function of temperature and magnetic field. Upon cooling in zero magnetic field, the crystal structure and the octahedra shrink along the c direction and elongate in the a and b planes, whereas the opposite occurs upon cooling at high field (x = 0.2 and 0.5). These findings yield evidence for an orbital rearrangement driven by temperature and magnetic field, which accompanies the metamagnetic transition at low temperature. The temperature and magnetic-field dependencies are found to be governed by the same energy scale.

Journal Article↗

PubMed2005

Compartmental bone morphometry in the mouse femur: reproducibility and resolution dependence of microtomographic measurements.

Microcomputed tomography (microCT) is widely used for nondestructive bone phenotyping in small animals, especially in the mouse. Here, we investigated the reproducibility and resolution dependence of microCT analysis of microstructural parameters in three different compartments in the mouse femur. Reproducibility was assessed with respect to precision error (PE%CV) and intraclass correlation coefficient (ICC). We examined 14 left femurs isolated postmortem from two strains of mice (seven per group). Measurements and analyses were repeated five times on different days. In a second step, analysis was repeated again five times for a single measurement. Resolution dependence was assessed by high-resolution measurements (10 microm) in one strain and subsequent image degrading. Reproducibility was better in full bone compartment and in cortical bone compartment in the diaphysis (PE%CV = 0.06-2.16%) than in trabecular compartment in the distal metaphysis (PE(%CV) = 0.59-5.24%). Nevertheless, ICC (0.92-1.00) showed a very high reliability of the assessed parameters in all regions, indicating very small variances within repeated measurements compared to the population variances. Morphometric indices computed from lower- and higher-resolution images displayed in general only weak dependence and were highly correlated with each other (R2 = 0.91-0.99). The results show that parameters in the full and cortical compartments were very reproducible, whereas precision in the trabecular compartment was somewhat lower. Nevertheless, all compartmental analysis methods were very robust, as shown by the high ICC values, demonstrating high suitability for application in inbred strains, where highest precision is needed due to small population variances.

Animals↗

PubMed2005

Microstructural insight into pedestrian pelvic fracture as assessed by high-resolution computed tomography.

Pelvic and femoral neck bone surface strains were recorded in five full-body human cadaver vehicle-pedestrian impacts. Impacts were performed at 40 km/h using automotive front ends constructed to represent those used in previously reported finite element simulations. While experimental kinematics and bone strains closely matched model predictions, observed pelvic fractures did not consistently agree with the model, and could not be solely explained by vehicle geometry. In an attempt to reconcile injury outcome with factors apart from vehicle design, a proxy measure of subject skeletal health was assessed by high-resolution quantitative computed tomography (HRqCT) of the femoral neck. The incidence of hip/pelvis fracture was found to be consistent with low volumetric bone mineral density and low trabecular bone density. This finding lends quantitative support to the notion that healthy trabecular architecture is crucial in withstanding non-physiological impact loads. Furthermore, it is recommended that injury criteria used to assess vehicle safety with regard to pedestrians consider the increased susceptibility of elderly victims to pelvic fracture.

Accidents, Traffic↗

PubMed2005

Back muscle activation pattern and spectrum in defined load situations.

For the prevention and rehabilitation of low back pain the understanding muscle function in the low back region is essential. Important aspects of function include the muscle activation patterns and muscle fatigue. In the low back region m. erector spinae plays a critical role. The different parts of this muscle complex differ considerably in function. Following the concept of Bergmark [A. Bergmark, Stability of the lumbar spine, Acta Orthop. Scand. 60 (1989) 1-54] trunk muscles can be divided in two subsystems, the global-mobilizing-system and the local-stabilizing-system. At present the multifidus muscles are assigned to the local whereas the longissimus and iliocostalis muscles are assigned to the global system. From results of the four parts of our investigation, it can be shown that essential information about muscle function can be obtained by spectral and intra- as well as inter-muscular surface EMG parameters. Obtained data demonstrated functional transitions between the local and global system of trunk muscles for the multifidus muscle.

Journal Article↗

PubMed2005

Identification of an unconventional nuclear localization signal in human ribosomal protein S2.

Ribosomal proteins must be imported into the nucleus after being synthesized in the cytoplasm. Since the rpS2 amino acid sequence does not contain a typical nuclear localization signal, we used deletion mutant analysis and rpS2-beta-galactosidase chimeric proteins to identify the nuclear targeting domains in rpS2. Nuclear rpS2 is strictly localized in the nucleoplasm and is not targeted to the nucleoli. Subcellular localization analysis of deletion mutants of rpS2-beta-galactosidase chimeras identified a central domain comprising 72 amino acids which is necessary and sufficient to target the chimeric beta-galactosidase to the nucleus. The nuclear targeting domain shares no significant similarity to already characterized nuclear localization signals in ribosomal proteins or other nuclear proteins. Although a Nup153 fragment containing the importinbeta binding site fused to VP22 blocks nuclear import of rpS2-beta-galactosidase fusion proteins, nuclear uptake of rpS2 could be mediated by several import receptors since it binds to importinalpha/beta and transportin.

Active Transport, Cell Nucleus↗

PubMed2005

Modulation of leg muscle activity and gait kinematics by walking speed and bodyweight unloading.

During rehabilitation, many patient groups are being trained using bodyweight-supported treadmill training. However, little is known about modulation of time and distance parameters, joint movements and leg muscle EMG patterns by very low walking speeds or partial bodyweight unloading. We collected data from 20 healthy young volunteers who walked on a treadmill at walking speeds varying between 0.5 and 5.0 km h(-1) (0.14-1.39 ms(-1)) and with 0%, 25%, 50% and 75% bodyweight unloading. We found that cadence and stride length were largely influenced by walking speed, while bodyweight unloading influenced these measures only at 75%. However, the relative duration of the gait phases changed largely only at walking speeds less than 2.5 km h(-1), but was influenced by all different bodyweight unloading conditions. Joint trajectories of knee and ankle joint, as well as leg muscle EMG activity patterns changed largely at walking speeds slower than 2.5 km h(-1) and with 75% bodyweight unloading. We concluded that the parameters we investigated changed minimally at walking speeds faster than 2.5 km h(-1) and bodyweight unloading conditions less than 50%. Therefore, standards for EMG activity and joint angle trajectories should only be compared when the training is done with velocities higher than 2.5 km h(-1) and less than 50% body weight unloading.

Adult↗

PubMed2005

Bond strength of chlorine peroxide.

The bond strength of chlorine peroxide (ClOOCl) is studied by photoionization mass spectrometry. The experimental results are obtained from the fragmentation threshold yielding ClO+, which is observed at 11.52 +/- 0.025 eV. The O-O bond strength D(o) is derived from this value in comparison to the first ionization energy of ClO, yielding D(o)298 = 72.39 +/- 2.8 kJ mol(-1). The present work provides a new and independent method to examine the equilibrium constant K(eq) for chlorine peroxide formation via dimerization of ClO in the stratosphere. This yields an approximation for the equilibrium constant in the stratospheric temperature regime between 190 and 230 K of the form K(eq) = 1.92 x 10(-27) cm3 molecules(-1) x exp(8430 K/T). This value of K(eq) is lower than current reference data and agrees well with high altitude aircraft measurements within their scattering range. Considering the error limits of the present experimental results and the resulting equilibrium constant, there is agreement with previous works, but the upper limit of current reference values appears to be too high. This result is discussed along with possible atmospheric implications.

Journal Article↗

PubMed2005

3D morphology of cell cultures: a quantitative approach using micrometer synchrotron light tomography.

Current issues in both tissue engineering and cell biology deal with cell behavior extensively in 3D. Here, we explore synchrotron radiation micro-computed tomography as a tool for morphological characterization of such 3D cellular constructs, providing micrometer resolution in soft and hard tissues. Novel image processing techniques allowed quantification of local and global cell distributions, cell density, adhesive cell culture surface, and scaffold geometry. For proof of concept, we applied this technique to characterize the morphology of two cell cultures of different phenotypes, namely human dermal fibroblasts and mouse calvarial osteoblast-like cells, both seeded on a polymer multifilament yarn. From 3D visualizations in these case studies, we saw that the fibroblasts spanned between the yarn filaments and in this way encapsulated the yarn, whereas the osteoblast-like cells lined the filament surfaces and did not span between them. Differences found in cell distribution as a function of distance to the median yarn axis and the closest filament surface, respectively, quantified these qualitative impressions gained from 3D visualizations. Moreover, the volume-normalized adhesive surface differed by one order of magnitude between the two phenotypes. Our approach allows quantitative correlation of local scaffold geometry and cell morphology. It can be used to investigate the influence of cell phenotype as well as various biochemical agents on tissue engineering constructs and the behavior of cells in culture.

Animals↗

PubMed2005

Synthesis and characterization of porous beta-tricalcium phosphate blocks.

Porous beta-tricalcium phosphate (beta-TCP) blocks with four different macropore sizes (pore larger than 50 microm were synthesized using "calcium phosphate emulsions", and characterized by optical, geometrical, gravimetric, and radiological methods. The reproducibility of the synthesis method was excellent. Moreover, the macropore size could be easily controlled without modifying the microporosity (pore smaller than 50 microm) or the total porosity (microporosity+macroporosity). Based on the initial composition of the blocks and their final apparent density, the microporosity, macroporosity, and the total block porosity were calculated to be close to 21%, 54%, and 75%, respectively. These values were confirmed by microcomputed tomography (microCT). The mean macropore diameters were close to 150, 260, 510 and 1220 microm, as measured optically. Consistently lower values (25% lower) were obtained by microCT, but the linear correlation between microCT and optical method was high (r(2)>0.97). The macropore size distribution calculated from microCT scans appears to be narrow and normally distributed. The very good correlation between the results of the various methods and the possibility to determine the pore size distribution suggest that microCT is an ideal tool to non-destructively characterize macroporous calcium phosphate bone substitutes.

Biocompatible Materials↗

PubMed2005

Long-term periarticular bone adaptation in a feline knee injury model for post-traumatic experimental osteoarthritis.

OBJECTIVES: This study investigates the long-term changes of the periarticular bone, including cancellous bone and the subchondral plate, in an anterior cruciate ligament (ACL)-transected cat for post-traumatic osteoarthritis (OA). These periarticular bone changes are related to the health of all knee tissues including articular cartilage degeneration and may be a key component of osteoarthritic development. METHODS: Thirteen cats (mean mass 4.9+/-1.9 kg) were divided into three experimental groups: (1) normal controls, (2) 16 week, and (3) 5 year post unilateral ACL-transection (ACLT). Micro-computed tomography was used to scan the three-dimensional (3D) bone architecture of the proximal tibia, and analysis was performed on the subchondral plate and cancellous bone in the epiphyseal and metaphyseal regions of each bone. RESULTS: A decrease in cancellous bone mass (BV/TV) and subchondral plate thickness (Ct.Th) was observed 16 week post-ACLT, and the trend was statistically significant for the long-term animals (>5 year post-ACLT: BV/TV decreased 16.8%, P<0.003; Ct.Th decreased 36.8%, P<0.03). A decrease in bone mass was also observed as a function of animal age by comparing the young and aged normal control animals, however ACLT intensified those changes, particularly Ct.Th (P<0.009) and anisotropy (P<0.045). It was speculated that decreased internal joint loading despite normal kinematics may play an important role in the long-term reduction of cancellous bone volume and subchondral plate thinning. CONCLUSIONS: The periarticular bone changes measured in this study were concurrent with articular cartilage degeneration, and suggest that bone may be a contributing factor in the aetiology of post-traumatic OA development.

Animals↗

PubMed2005

Odor compounds in waste gas emissions from agricultural operations and food industries.

In the last decades, large-scale agricultural operations and food industries have increased. These operations generate numerous types of odors. The reduction of land areas available for isolation of agricultural and food processing industrial operations from the public area and the increase in sensitivity and demand of the general public for a clean and pleasant environment have forced all of these industries to control odor emissions and toxic air pollutants. To develop environmentally sound, sustainable agricultural and food industrial operations, it is necessary to integrate research that focuses on modern analytical techniques and latest sensory technology of measurement and evaluation of odor and pollution, together with a fundamental knowledge of factors that are the basic units contributing to the production of odor and pollutants. Without a clear understanding of what odor is, how to measure it, and where it originates, it will be difficult to control the odor. The present paper reviews the available information regarding odor emissions from agricultural operations and food industries by giving an overview about odor problems, odor detection and quantification, and identifying the sources and the mechanisms that contribute to the odor emissions. Finally, ways of reducing or controlling the odor problem are discussed.

Agriculture↗

PubMed2005

Microbial degradation of selected odorous substances.

A biological odor treatment system has several advantages compared to conventional physical and chemical treatment technologies: (1) it is highly efficient in the treatment of waste gases characterized by high flow rates and low concentrations of contaminants; (2) the biodegradable pollutants are completely destroyed; and (3) it has low cost [Devinny, J.S., Deshusses, M.A., Webster, T.S., 1999. Biofiltration for Air Pollution Control. Lewis Publisher, New York, USA; Kennes, C., Veiga, M.C., 2001. Bioreactors for waste gas treatment. Kluwer Academic Publishers, London]. Because microorganisms play the major role in the successful biological odor treatment system, the understanding of microbial degradation of the key odorants is very important. This article describes the occurrence and the characteristics of selected key odorous compounds such as sulphides, amines, and pyrazine compounds. The article reviews available information in the literature and our experimental results of microbial degradation of the selected compounds. This is the first article that presents the isolation and characterization of bacterial strains that can utilize dimethyl trisulfide (DMTS), triethylamine (TEA) or different pyrazines, as a sole carbon and energy source. The biological degradation pathways of some of these compounds are postulated. Moreover, the influence of the presence of other odorous compounds in the culture medium on the degradation of the target odorous compounds by the isolated bacteria is presented. The information presented in the paper can be used to develop new systems for biological odor treatment.

Air Pollution↗

PubMed2005

Engineering craniofacial scaffolds.

OBJECTIVE: To develop an integrated approach for engineering craniofacial scaffolds and to demonstrate that these engineered scaffolds would have mechanical properties in the range of craniofacial tissue and support bone regeneration for craniofacial reconstruction. EXPERIMENTAL VARIABLE: Scaffold architecture designed to achieve desired elasticity and permeability. Scaffold external shape designed to match craniofacial anatomy. OUTCOME MEASURE: Final fabricated biomaterial scaffolds. Compressive mechanical modulus and strength. Bone regeneration as measured by micro-CT scanning, mechanical testing and histology. SETTING: Departments of Biomedical Engineering, Oral/Maxillofacial Surgery, and Oral Medicine, Pathology and Oncology at the University of Michigan. RESULTS: Results showed that the design/fabrication approach could create scaffolds with designed porous architecture to match craniofacial anatomy. These scaffolds could be fabricated from a wide range of biomaterials, including titanium, degradable polymers, and degradable calcium phosphate ceramics. Mechanical tests showed that fabricated scaffolds had compressive modulus ranging 50 to 2900 MPa and compressive strength ranging from 2 to over 56 MPa, within the range of human craniofacial trabecular bone. In vivo testing of designed scaffolds showed that they could support bone regeneration via delivery of BMP-7 transduced human gingival fibroblasts in a mouse model. Designed hydroxyapatite scaffolds with pore diameters ranging from 400 to 1200 microns were implanted in minipig mandibular defects for 6 and 18 weeks. Results showed substantial bone ingrowth (between 40 and 50% at 6 weeks, between 70 and 80% at 18 weeks) for all scaffolds, with no significant difference based on pore diameter. CONCLUSION: Integrated image-based design and solid free-form fabrication can create scaffolds that attain desired elasticity and permeability while fitting any 3D craniofacial defect. The scaffolds could be manufactured from degradable polymers, calcium phosphate ceramics and titanium. The designed scaffolds supported significant bone regeneration for all pore sizes ranging from 300 to 1200 microns. These results suggest that designed scaffolds are clinically applicable for complex craniofacial reconstruction.

Animals↗

PubMed2005

Individual consistency of dairy cows' activity in their home pen.

The aim of this research was to investigate the long-term individual consistency of dairy cow activity in the home pen. Activity in a loose-housing barn was examined in 35 Holstein-Friesian dairy cows using an automatic monitoring system. Different amounts of activity could be distinguished by dynamic thresholds. Subsequently, the following categories of activities were calculated as mean daily values: number of high activity counts (NHA), number of low activity bouts (NLB), and mean duration of low activity bouts (DLB). Category NHA reflects locomotor behavior, and NLB and DLB reflect resting behavior. Recordings were repeated 4 times during a period of 2 lactations for 10 d each (total observation time: 40 d). Effects of parity, week of lactation, and environmental conditions (light intensity and ambient temperature) on activity were also assessed. Our results reveal a high degree of consistency in individual cow activity throughout 2 lactations. Repeatability (REP), calculated using covariance parameters, was high for all traits, although the REP of NHA (REP = 0.62) was higher than the REP of NLB (0.40) or DLB (0.49). Parity, week of lactation, and environmental conditions had no significant effects on activity. In conclusion, our results indicate that activity of dairy cows in their home pen was highly consistent over time, and thus, could be considered as individual traits.

Activity Cycles↗

PubMed2005

Usefulness of quantitative ultrasound in evaluating structural and mechanical properties of bone: comparison of ultrasound, dual-energy X-ray absorptiometry, micro-computed tomography, and mechanical testing of human phalanges in vitro.

INTRODUCTION: Ultrasound studies evaluating bone tissue generally concentrate on two parameters--velocity and attenuation. This study aimed to determine whether ultrasound signal analysis techniques could provide additional information on the structural and mechanical characteristics of bone. MATERIALS AND METHODS: In vitro measurements were made on 26 left index fingers from human cadavers. Ultrasound measurements at the distal metaphysis and epiphysis; dual-energy X-ray absorptiometry of the whole phalanx; micro-computed tomography at the distal quarter of the phalanx (that is, the distal epiphysis and metaphysis), and mechanical three-point bending tests were performed. Univariate and multivariate linear regression techniques were used to analyze the results. RESULTS: The ultrasound parameters, speed of sound and ultrasound peak amplitude correlated significantly with the three micro-computed tomography measures used to describe the characteristics of mineralized material (r=0.69-0.79, p<0.05). Low frequency ultrasound correlated significantly with micro-computed tomography parameters describing inter-trabecular or marrow spaces (r=0.68-0.78, p<0.05). Comparison of ultrasound parameters with geometric characteristics showed that while speed of sound and ultrasound peak amplitude were related to the cortical area, moment of inertia, and mechanical load (r=0.57-0.83, p< 0.05), the amplitude of the fastest part of the ultrasound signal and full width at 80% maximum of the low frequency peak were related to the relative area of the medullary canal (r=0.40-0.43, p<0.05). DISCUSSION: Quantitative ultrasound may provide information on structural, material and mechanical characteristics of bone to the same extent and even better than DXA Bone Mineral Density. These results have been obtained by a complete and exhaustive use of QUS technology in situ but under clinical conditions. The ultrasound parameters, correctly used and combined, seem to be effective tools for investigating bone tissue.

Absorptiometry, Photon↗

PubMed2004

Differential transcriptional effects of PTH and estrogen during anabolic bone formation.

The aim of this study was to compare transcriptional regulation in vivo during anabolic bone formation induced by either estradiol (E2) treatment or intermittent parathyroid hormone[1-34] (PTH) therapy. We utilized an ovariectomized (OVX) mouse model of osteoporosis and transcriptional profiling to identify genes upregulated by either high-dose E2 or PTH. Five weeks post-OVX, the mice were administered either E2 and/or PTH, or vehicle for 4 weeks. Femoral bones were analyzed by microCT and histomorphometry to confirm the anabolic effect of each treatment. OVX vehicle-treated control mice lost metaphyseal trabecular bone, with significant decrease in trabecular number, thickness, and connectivity. Both E2 and PTH treatments increased trabecular and cortical bone indices above the level of the sham operated controls, fully restoring both bone volume and bone mineral density (BMD). Moreover, PTH/E2 combination treatment led to significantly greater increase in cancellous bone and BMD than would be expected from the additive effects of the separate treatments. To determine whether PTH and E2 treatments were stimulating similar bone anabolic mechanisms, or were activating distinct signaling pathways, we compared patterns of gene expression using transcriptional profiling after either E2 or PTH treatment. After 4, 11, and 24 days of treatment, total RNA was collected from both the distal femoral metaphysis and diaphysis. Transcriptional profiling was performed using Affymetrix GeneChip probe arrays, comprised of approximately 36,000 full-length mouse genes and EST clusters from the UniGene database. Several markers of osteoblast activity, including c-fos, RANKL, PHEX, and PTHR1, were consistently upregulated by PTH in both skeletal sites. PTH treatment also increased expression of Cathespin K, consistent with the predicted increase in osteoclast activity. E2 treatment upregulated a largely distinct set of genes, including TGFbeta3, and BMP1, as well as several genes critical for cell cycle control, including Cyclin D1 and CDK inhibitor 1A. Overall, comparison of transcriptional profiles suggest that anabolic responses in bone to PTH and high-dose E2 treatment after OVX-induced osteoporosis involve largely distinct patterns of gene regulation, each resulting in restoration of bone mass.

Absorptiometry, Photon↗

PubMed2004

Single joint perturbation during gait: neuronal control of movement trajectory.

The aim of this study was to investigate the effect of single joint displacement on the pattern of leg muscle electromyographic (EMG) activity during locomotion. For the first time, unilateral rotational hip or knee joint displacements were applied by a driven orthotic device at three phases of swing during locomotion on a treadmill. The response pattern of bilateral leg muscle activation with respect to the timing and selection of muscles was almost identical for displacements of upper (hip joint) or lower (knee joint) leg. The leg muscle EMG responses were much stronger when the displacement was directed against the physiological movement trajectory, compared with when the displacement was reinforcing, especially during mid swing. It is suggested that these response patterns are designed to restore physiological movement trajectory rather than to correct a single joint position. Displacements released at initial or terminal swing, assisting or resisting the physiological movement trajectory, were followed by similar and rather unspecific response patterns. This was interpreted as being directed to stabilise body equilibrium.

Adult↗