Search PubMed⌕ Search

Biomedical subjects

R M Hall

Publications and source records attributed to R M Hall.

At least 73 records · Page 4Linked to original sources
PubMed1992

The integron In1 in plasmid R46 includes two copies of the oxa2 gene cassette.

The sequence of the insert region of the integron In1 found in the IncN plasmid R46 was completed. The insert region is 2929 bases long and includes four gene cassettes, two of which are identical copies of the oxa2 gene cassette flanking an aadA1 cassette. The fourth cassette encodes an open reading frame orfD. From comparison of these data with published maps and sequences it is argued that the integrons found in the IncN plasmids pCU1 and R1767 and in the transposon Tn2410 are closely related to In1 from R46. Both site-specific gene insertion and recA-dependent recombination are likely to have contributed to the evolution of these integrons.

Amino Acid Sequence↗
PubMed1992

Silica exposure in hand grinding steel castings.

Exposure to silica dust was studied in the grinding of castings in a steel foundry that used conventional personal sampling methods and new real-time sampling techniques developed for the identification of high-exposure tasks and tools. Approximately one-third of the personal samples exceeded the National Institute for Occupational Safety and Health recommended exposure limit for crystalline silica, a fraction similar to that identified in other studies of casting cleaning. Of five tools used to clean the castings, the tools with the largest wheels, a 6-in. grinder and a 4-in. cutoff wheel, were shown to be the major sources of dust exposure. Existing dust control consisted of the use of downdraft grinding benches. The size of the casting precluded working at a distance close enough to the grates of the downdraft benches for efficient capture of the grinding dust. In addition, measurements of air recirculated from the downdraft benches indicated that less than one-half of the respirable particles were removed from the contaminated airstream. Previous studies have shown that silica exposures in the cleaning of castings can be reduced or eliminated through the use of mold coatings, which minimize sand burn-in on the casting surface; by application of high-velocity, low-volume exhaust hoods; and by the use of a nonsilica molding aggregate such as olivine. This study concluded that all these methods would be appropriate control options.

Air Pollutants, Occupational↗
PubMed1992

Gene cassettes from the insert region of integrons are excised as covalently closed circles.

Integrons are DNA elements which generally include one or more discrete gene cassettes inserted at a specific site. We have recently proposed a model for the acquisition and dissemination of genes found in the insert region of integrons, which requires the existence of circularized gene cassettes. Evidence for the existence of covalently closed circular molecules consisting of one or more gene cassettes has now been obtained. Low levels of small molecules which hybridize to probes specific for individual gene cassettes were detected in plasmid DNA isolated from cells containing a plasmid which includes an integron fragment with three gene cassettes aacC1, orfE and aadA2. These molecules were only detected when the gene encoding the integron DNA integrase was also present and are thus products of site-specific cassette excision. The excised cassettes have been shown to be in the form of covalently closed supercoiled circles, by digestion with restriction enzymes exonuclease III and DNase I. The circular excision products detected included either one cassette, aadA2 or orfE, two cassettes, aacC1 and orfE or all three cassettes. The predicted sequence of the recombinant junction in the excised aadA2 cassette confirmed that excision was precise. The predicted unique sequences of the 59-base elements associated with individual genes in the circular cassette form were compiled, and the sequences of the seven-base core sites which flank 59-base elements are now, with few exceptions, exact inverted repeats.

Base Sequence↗
PubMed1992

Site-specific deletion and rearrangement of integron insert genes catalyzed by the integron DNA integrase.

Deletion of individual antibiotic resistance genes found within the variable region of integrons is demonstrated. Evidence for gene duplications and rearrangements resulting from the insertion of gene units at new locations is also presented. Deletion, duplication, and rearrangement occur only in the presence of the integron-encoded DNA integrase. These events are precise and involve loss or gain of one or more complete insert units or gene cassettes. This confirms the recent definition of gene cassettes as consisting of the gene coding sequences, all except the last 7 bases of the 59-base element found at the 3' end of the gene, and the core site located 5' to the gene (Hall et al., Mol. Microbiol. 5:1941-1959, 1991) and demonstrates that individual gene cassettes are functional units which can be independently mobilized. Both deletions and duplications can be generated by integrase-mediated cointegrate formation followed by integrase-mediated resolution involving a different pair of sites. However, deletion occurs 10 times more frequently than duplication, and we propose that the majority of deletion events are likely to involve integrase-dependent excision of the gene unit to generate a circular gene cassette. The implications of these findings in understanding the evolution of integrons and the spread of antibiotic resistance genes in bacterial populations is discussed.

Base Sequence↗
PubMed1991

Bleomycin resistance as a selectable marker for transformation of the eukaryote, Dictyostelium discoideum.

An expression cassette was constructed, which has the bacterial bleomycin (Bm) resistance-encoding gene (ble) fused to the Dictyostelium discoideum actin-6 promoter, with a segment of 3'-flanking DNA from the actin-8-encoding gene placed downstream from the ble gene to serve as a transcription terminator. Plasmid pMUW161, which contains this cassette and the D. discoideum plasmid Ddp2 origin of DNA replication, transformed D. discoideum with high efficiency under Bm selection. Hence, this construct is useful as a dominant selectable marker for D. discoideum.

Actins↗
PubMed1991

Sequence analysis of the inducible chloramphenicol resistance determinant in the Tn1696 integron suggests regulation by translational attenuation.

The sequence of the Tn1696 determinant for inducible nonenzymatic chloramphenicol resistance has been determined. The cml region, the fourth insert of the Tn1696 integron, is 1547 bases and includes a 59-base element at the 3' end, as is typical of integron inserts. One gene, designated cmlA and predicting a polypeptide of 44.2 kDa, is encoded in the insert. However, the cmlA region shows one feature not previously found in an integron insert. A promoter is located within the cmlA insert, and translational attenuation signals related to those of the inducible cat and ermC genes found in gram-positive organisms are also present. The regulatory region includes a leader peptide of nine amino acids, a ribosome stall sequence related to those preceding cat genes, and two alternative pairs of stem-loop structures which either sequester or disclose the ribosome binding site and start codon preceding the cmlA gene.

Amino Acid Sequence↗
PubMed1991

Large scale expression and purification of recombinant HIV-1 proteinase from Escherichia coli.

The availability of target proteins in sufficient quantity is a limiting factor in crystallographic studies and therefore in rational drug design. Even after optimisation, expression of recombinant proteins may be low and the only way to produce enough protein is by large scale cell growth/purification. HIV-1 proteinase in Escherichia coli, which due to its toxicity is expressed as a soluble protein only at around 0.1% of total protein, is a paradigm for this. In this paper a detailed process for large scale expression and purification of HIV-1 proteinase which delivers material of suitable quantity (30 mg from 500 g of wet weight of cells) and quality for crystallographic studies is described.

Escherichia coli↗
PubMed1991

Site-specific insertion of genes into integrons: role of the 59-base element and determination of the recombination cross-over point.

From examination of published DNA sequences of genes found inserted at a specific site in integrons, all genes are shown to be associated, at their 3' ends, with a short imperfect inverted repeat sequence, a 59-base element or relative of this element. The similarity of the arrangement of gene inserts in the integron and in the Tn7 transposon family is described. A refined consensus for the 59-base element is reported. Members of this family are highly diverged and the relationship of a group of longer elements to the 59-base elements is demonstrated. The ability of 59-base elements of different length and sequence to act as sites for recombination catalysed by the integron-encoded DNA integrase is demonstrated, confirming that elements of this family have a common function. The ability of elements located between gene pairs to act as recombination sites has also been demonstrated. The recombination cross-over point has been localized to the GTT triplet which is conserved in the core sites, GTTRRRY, found at the 3' end of 59-base elements. Recombination at the core site found in inverse orientation at the 5' end of the 59-base elements was not detected, and the sequences responsible for orientation of the recombination event appear to reside within the 59-base element. A model for site-specific insertion of genes into integrons and Tn7-like transposons is proposed. Circular units consisting of a gene associated with a 59-base element are inserted into an ancestral element which contains neither a gene nor a 59-base element.(ABSTRACT TRUNCATED AT 250 WORDS)

Base Sequence↗
PubMed1991

A new trimethoprim resistance gene, dhfrX, in the In7 integron of plasmid pDGO100.

A new trimethoprim resistance determinant, designated dhfrX, was identified in the In7 integron of pDGO100. The sequence of the dhfrX dihydrofolate reductase is up to 28% identical to the sequences of several known dihydrofolate reductase proteins. The dhfrX gene is adjacent to the second 3'-conserved segment of the In7 integron, but the first 77 bases of this segment are not present.

Amino Acid Sequence↗
PubMed1990

Optimized vectors and selection for transformation of Neurospora crassa and Aspergillus nidulans to bleomycin and phleomycin resistance.

To provide a dominant selectable marker for transformation of Neurospora crassa strains lacking specific auxotrophic mutations, we have engineered the bleomycin (Bm) resistance-encoding gene (ble) from the bacterial transposon Tn5 for expression in N. crassa. The coding region of the ble gene was fused to the promoter and terminator regions of the N. crassa am gene. In some vectors, multiple cloning sites were placed flanking the ble gene to provide a versatile ble cassette. When introduced into N. crassa, the hybrid ble gene conferred resistance to greater than 15 micrograms Bm/ml. Under optimal conditions, the levels of Bm required (2.5 micrograms/ml) make even large-scale transformation experiments very economical. Aspergillus nidulans could also be efficiently transformed to Bm resistance using the N. crassa ble gene fusion. Since the ble gene functions in both N. crassa and A. nidulans, the gene should be useful as a transformation marker for the many other filamentous fungi which are sensitive to Bm.

Aspergillus nidulans↗
PubMed1990

The structure of a partial duplication in the integron of plasmid pDGO100.

A family of novel potentially mobile DNA elements called integrons, has recently been described (H. W. Stokes and R. M. Hall, 1989, Mol. Microbiol. 3, 1669-1683). The integrons present in the plasmids pDGO100 and pSa are unusual in that they include a duplication of the sulI gene which is located in one of the two conserved segments that make up these elements. In order to define the nature of the duplication in pDGO100, we have sequenced the sulI gene region located between the aadB and the dhfr genes of pDGO100. This region includes the first 1355 bases of the 2026-base 3'-conserved segment present in the integrons of Tn21, R46 and R388, and the sequence identity in pDGO100 ceases 24 bases beyond the end of the sulI gene. This position corresponds to the center of a 59-base element, a remnant of which is located at the end of sulI. This finding suggests that the 59-base element may have been involved in the event which gave rise to the partial duplication.

Amino Acid Sequence↗
PubMed1990

The DNA adenine methyltransferase (dam+) gene of bacteriophage T4 reverses the mutator phenotype of an Escherichia coli dam mutant.

The mutator phenotype of Escherichia coli dam mutants was found to be reversed by introduction of the bacteriophage T4 gene for DNA adenine methyltransferase. This precludes a direct role for the E. coli DNA adenine methyltransferase in mismatch repair, in addition to its role in strand discrimination, as suggested by earlier studies (S. L. Schlagman, S. Hattman, and M. G. Marinus, J. Bacteriol. 165:896-900, 1986).

Cloning, Molecular↗
PubMed1989

A novel family of potentially mobile DNA elements encoding site-specific gene-integration functions: integrons.

A family of novel mobile DNA elements is described, examples of which are found at several independent locations and encode a variety of antibiotic resistance genes. The complete elements consist of two conserved segments separated by a segment of variable length and sequence which includes inserted antibiotic resistance genes. The conserved segment located 3' to the inserted resistance genes was sequenced from Tn21 and R46, and the sequences are identical over a region of 2026 bases, which includes the sulphonamide resistance gene sull, and two further open reading frames of unknown function. The complete sequences of both the 3' and 5' conserved regions of the DNA element have been determined. A 59-base sequence element, found at the junctions of inserted DNA sequences and the conserved 3' segment, is also present at this location in the R46 sequence. A copy of one half of this 59-base element is found at the end of the sull gene, suggesting that sull, though part of the conserved region, was also originally inserted into an ancestral element by site-specific integration. Inverted or direct terminal repeats or short target site duplications, both of which are characteristics of class I and class II transposons, are not found at the outer boundaries of the elements described here. Furthermore, the conserved regions do not encode any proteins related to known transposition proteins, except the DNA integrase encoded by the 5' conserved region which is implicated in the gene insertion process. Mobilization of this element has not been observed experimentally; mobility is implied from the identification of the element in at least four independent locations, in Tn21, R46 (IncN), R388 (IncW) and Tn1696. The definitive features of these novel elements are (i) that they include site-specific integration functions (the integrase and the insertion site); (ii) that they are able to acquire various gene units and act as an expression cassette by supplying the promoter for the inserted genes. As a consequence of acquiring different inserted genes, the element exists in a variety of forms which differ in the number and nature of the inserted genes. This family of elements appears formally distinct from other known mobile DNA elements and we propose the name DNA integration elements, or integrons.

Amino Acid Sequence↗
PubMed1988

A mutation in the DNA adenine methylase gene (dam) of Salmonella typhimurium decreases susceptibility to 9-aminoacridine-induced frameshift mutagenesis.

A mutant of Salmonella typhimurium with a reduced response to mutation induction by 9-aminoacridine (9AA) has been isolated. The mutation (dam-2) is located in the DNA adenine methylase gene. The dam-2 mutant strain exhibits a level of sensitivity to 2-aminopurine (2AP) intermediate between that of the dam+ and the DNA adenine methylation-deficit dam-1 strain, and 2AP sensitivity was reversed by introduction of a mutH mutation or of the plasmid pMQ148 (which carries a functional Escherichia coli dam+ gene). However, the dam-2 strain is not grossly defective in DNA adenine methylase activity. Whole cell DNA appears full methylated at -GATC- sites. The levels of 9AA required to induce equivalent levels of frameshift mutagenesis in the dam-2 strain were approximately 2-fold higher than for the dam+ strain. Introduction of pMQ148 dam+ reduced the level of 9AA required for induction of frameshift mutations 4-fold in the dam-2 strain and 2-fold in the dam+ strain. The dam-2 mutation had no effect on the levels of ICR191 required for induction of frameshift mutations, but introduction of pMQ148 reduced the ICR191-induced mutagenesis 2-fold. The dam+/pMQ148, dam-2/pMQ148 and dam-1/pMQ148 strains showed identical dose-response curves for both 9AA and ICR191. These results are consistent with a slightly reduced (dam-2) or increased (pMQ148) rate of methylation at the replication fork. The 2AP sensitivity of the dam-2 strain cannot be simply explained. Furthermore, addition of methionine to the assay medium reverses the 2AP sensitivity of the dam-2 strain, but has no effect on 9AA mutagenesis.

Aminacrine↗
PubMed1987

The region of the IncN plasmid R46 coding for resistance to beta-lactam antibiotics, streptomycin/spectinomycin and sulphonamides is closely related to antibiotic resistance segments found in IncW plasmids and in Tn21-like transposons.

The nucleotide sequence of a 2.5 kb segment of the pKM101 (R46) genome has been determined. The 1.3 kb from a BamHI site at 153 to base 1440 differs by only 2 bases from a part of the published sequence of the aadB (gentamicin resistance) gene region including the coding region for the N-terminal 70 amino acids of the predicted aadB product. The same sequence has been found 5'-to the dhfrII gene of R388 and to the aadA gene of Tn21 (R538-1). Three open reading frames are located in this region, two on the same strand as the resistance genes and one on the complementary strand. The latter predicts a polypeptide of 337 amino acids, whose N-terminal segment is 40% homologous to the predicted product of an open reading frame of 179 amino acids located next to the dhfrI gene of Tn7. The oxa2 (oxacillin resistance) gene predicts a long polypeptide commencing with (the N-terminal) 70 amino acids of the aadB product. A similar arrangement is found in the aadA gene of R538-1. The N-terminal segment of an aadA gene is located 3'- to oxa2, separated by 36 bases. Sequences surrounding the BamHI site are identical to sequences 5'- to the tnpM gene of Tn21 and homology ceases where homology between Tn21 and Tn501 commences. The possibility that this antibiotic resistance segment is a discrete mobile DNA element is discussed.

Amino Acid Sequence↗