Search PubMed⌕ Search

Biomedical subjects

R Lahti

Publications and source records attributed to R Lahti.

At least 19 recordsLinked to original sources
PubMed2006

Two soluble pyrophosphatases in Vibrio cholerae: transient redundancy or enduring cooperation?

Soluble pyrophosphatases (PPases), which are essential for cell life, comprise two evolutionarily unrelated families (I and II). Prokaryotic genomes generally contain a single PPase gene encoding either family I or family II enzyme. Surprisingly, four Vibrionales species, including the human pathogen Vibrio cholerae, contain PPase genes of both families. Here we show that both genes are transcriptionally active in V. cholerae, and encode functional PPases when expressed in Escherichia coli. In contrast, only the family I PPase protein is detected in V. cholerae under our experimental conditions. Phylogenetic analyses indicate that family II enzymes are not native to gamma-proteobacteria, but are of benefit to the marine species of this bacterial class. In this context, we favor the hypothesis that in the course of evolution, family II PPase was laterally transferred to the Vibrionales ancestor and partially degenerated due to functional redundancy, but nevertheless remained fixed as an adjunct to the family I enzyme.

Blotting, Western↗
PubMed2005

Inhibition of family II pyrophosphatases by analogs of pyrophosphate and phosphate.

Imidodiphosphate (the pyrophosphate analog containing a nitrogen atom in the bridge position instead of oxygen) is a potent inhibitor of family II pyrophosphatases from Streptococcus mutans and Streptococcus gordonii (inhibition constant Ki approximately 10 microM), which is slowly hydrolyzed by these enzymes with a catalytic constant of approximately 1 min(-1). Diphosphonates with different substituents at the bridge carbon atom are much less effective (Ki = 1-6 mM). The value of Ki for sulfate (a phosphate analog) is only 12 mM. The inhibitory effect of the pyrophosphate analogs exhibits only a weak dependence on the nature of the metal ion (Mn, Mg, or Co) bound in the active site.

Cobalt↗
PubMed2001

Quaternary structure and metal ion requirement of family II pyrophosphatases from Bacillus subtilis, Streptococcus gordonii, and Streptococcus mutans.

Pyrophosphatase (PPase) from Bacillus subtilis has recently been found to be the first example of a family II soluble PPase with a unique requirement for Mn2+. In the present work, we cloned and overexpressed in Escherichia coli putative genes for two more family II PPases (from Streptococcus mutans and Streptococcus gordonii), isolated the recombinant proteins, and showed them to be highly specific and active PPases (catalytic constants of 1700-3300 s(-)1 at 25 degrees C in comparison with 200-400 s(-)1 for family I). All three family II PPases were found to be dimeric manganese metalloenzymes, dissociating into much less active monomers upon removal of Mn2+. The dimers were found to have one high affinity manganese-specific site (K(d) of 0.2-3 nm for Mn2+ and 10-80 microm for Mg2+) and two or three moderate affinity sites (K(d) approximately 1 mm for both cations) per subunit. Mn2+ binding to the high affinity site, which occurs with a half-time of less than 10 s at 1.5 mm Mn2+, dramatically shifts the monomer <--> dimer equilibrium in the direction of the dimer, further activates the dimer, and allows substantial activity (60-180 s(-)1) against calcium pyrophosphate, a potent inhibitor of family I PPases.

Bacillus subtilis↗
PubMed2001

Ligand binding sites in Escherichia coli inorganic pyrophosphatase: effects of active site mutations.

Type I soluble inorganic pyrophosphatases (PPases) are well characterized both structurally and mechanistically. Earlier we measured the effects of active site substitutions on pH--rate profiles for the type I PPases from both Escherichia coli (E-PPase) and Saccharomyces cerevisae (Y-PPase). Here we extend these studies by measuring the effects of such substitutions on the more discrete steps of ligand binding to E-PPase, including (a) Mg(2+) and Mn(2+) binding in the absence of added ligand; (b) Mg(2+) binding in the presence of either P(i) or hydroxymethylbisphosphonate (HMBP), a competitive inhibitor of E-PPase; and (c) P(i) binding in the presence of Mn(2+). The active site of a type I PPase has well-defined subsites for the binding of four divalent metal ions (M1--M4) and two phosphates (P1, P2). Our results, considered in light of pertinent results from crystallographic studies on both E-PPase and Y-PPase and parallel functional studies on Y-PPase, allow us to conclude the following: (a) residues E20, D65, D70, and K142 play key roles in the functional organization of the active site; (b) the major structural differences between the product and substrate complexes of E-PPase are concentrated in the lower half of the active site; (c) the M1 subsite is functionally isolated from the rest of the active site; and (d) the M4 subsite is an especially unconstrained part of the active site.

Amino Acid Substitution↗
PubMed2001

Crystal structure of Streptococcus mutans pyrophosphatase: a new fold for an old mechanism.

BACKGROUND: Streptococcus mutans pyrophosphatase (Sm-PPase) is a member of a relatively uncommon but widely dispersed sequence family (family II) of inorganic pyrophosphatases. A structure will answer two main questions: is it structurally similar to the family I PPases, and is the mechanism similar? RESULTS: The first family II PPase structure, that of homodimeric Sm-PPase complexed with metal and sulfate ions, has been solved by X-ray crystallography at 2.2 A resolution. The tertiary fold of Sm-PPase consists of a 189 residue alpha/beta N-terminal domain and a 114 residue mixed beta sheet C-terminal domain and bears no resemblance to family I PPase, even though the arrangement of active site ligands and the residues that bind them shows significant similarity. The preference for Mn2+ over Mg2+ in family II PPases is explained by the histidine ligands and bidentate carboxylate coordination. The active site is located at the domain interface. The C-terminal domain is hinged to the N-terminal domain and exists in both closed and open conformations. CONCLUSIONS: The active site similiarities, including a water coordinated to two metal ions, suggest that the family II PPase mechanism is "analogous" (not "homologous") to that of family I PPases. This is a remarkable example of convergent evolution. The large change in C-terminal conformation suggests that domain closure might be the mechanism by which Sm-PPase achieves specificity for pyrophosphate over other polyphosphates.

Binding Sites↗
PubMed2001

Toward a quantum-mechanical description of metal-assisted phosphoryl transfer in pyrophosphatase.

The wealth of kinetic and structural information makes inorganic pyrophosphatases (PPases) a good model system to study the details of enzymatic phosphoryl transfer. The enzyme accelerates metal-complexed phosphoryl transfer 10(10)-fold: but how? Our structures of the yeast PPase product complex at 1.15 A and fluoride-inhibited complex at 1.9 A visualize the active site in three different states: substrate-bound, immediate product bound, and relaxed product bound. These span the steps around chemical catalysis and provide strong evidence that a water molecule (O(nu)) directly attacks PPi with a pK(a) vastly lowered by coordination to two metal ions and D117. They also suggest that a low-barrier hydrogen bond (LBHB) forms between D117 and O(nu), in part because of steric crowding by W100 and N116. Direct visualization of the double bonds on the phosphates appears possible. The flexible side chains at the top of the active site absorb the motion involved in the reaction, which may help accelerate catalysis. Relaxation of the product allows a new nucleophile to be generated and creates symmetry in the elementary catalytic steps on the enzyme. We are thus moving closer to understanding phosphoryl transfer in PPases at the quantum mechanical level. Ultra-high resolution structures can thus tease out overlapping complexes and so are as relevant to discussion of enzyme mechanism as structures produced by time-resolved crystallography.

Crystallography, X-Ray↗
PubMed2001

The electrophilic and leaving group phosphates in the catalytic mechanism of yeast pyrophosphatase.

Binding of pyrophosphate or two phosphate molecules to the pyrophosphatase (PPase) active site occurs at two subsites, P1 and P2. Mutations at P2 subsite residues (Y93F and K56R) caused a much greater decrease in phosphate binding affinity of yeast PPase in the presence of Mn(2+) or Co(2+) than mutations at P1 subsite residues (R78K and K193R). Phosphate binding was estimated in these experiments from the inhibition of ATP hydrolysis at a sub-K(m) concentration of ATP. Tight phosphate binding required four Mn(2+) ions/active site. These data identify P2 as the high affinity subsite and P1 as the low affinity subsite, the difference in the affinities being at least 250-fold. The time course of five "isotopomers" of phosphate that have from zero to four (18)O during [(18)O]P(i)-[(16)O]H(2)O oxygen exchange indicated that the phosphate containing added water is released after the leaving group phosphate during pyrophosphate hydrolysis. These findings provide support for the structure-based mechanism in which pyrophosphate hydrolysis involves water attack on the phosphorus atom located at the P2 subsite of PPase.

Catalysis↗
PubMed2001

Probing essential water in yeast pyrophosphatase by directed mutagenesis and fluoride inhibition measurements.

The pattern of yeast pyrophosphatase (Y-PPase) inhibition by fluoride suggests that it replaces active site Mg(2+)-bound nucleophilic water, for which two different locations were proposed previously. To localize the bound fluoride, we investigate here the effects of mutating Tyr(93) and five dicarboxylic amino acid residues forming two metal binding sites in Y-PPase on its inhibition by fluoride and its five catalytic functions (steady-state PP(i) hydrolysis and synthesis, formation of enzyme-bound PP(i) at equilibrium, phosphate-water oxygen exchange, and Mg(2+) binding). D117E substitution had the largest effect on fluoride binding and made the P-O bond cleavage step rate-limiting in the catalytic cycle, consistent with the mechanism in which the nucleophile is coordinated by two metal ions and Asp(117). The effects of the mutations on PP(i) hydrolysis (as characterized by the catalytic constant and the net rate constant for P-O bond cleavage) were in general larger than on PP(i) synthesis (as characterized by the net rate constant for PP(i) release from active site). The effects of fluoride on the Y-PPase variants confirmed that PPase catalysis involves two enzyme.PP(i) intermediates, which bind fluoride with greatly different rates (Baykov, A. A., Fabrichniy, I. P., Pohjanjoki, P., Zyryanov, A. B., and Lahti, R. (2000) Biochemistry 39, 11939-11947). A mechanism for the structural changes underlying the interconversion of the enzyme.PP(i) intermediates is proposed.

Amino Acid Substitution↗
PubMed2001

Directed mutagenesis studies of the C-terminal fingerprint region of Bacillus subtilis pyrophosphatase.

The sequence SRKKQxxP near the C-terminus is conserved in pyrophosphatases of the recently discovered family II and includes a triplet of positively charged residues, two of which (Arg295 and Lys296 in Bacillus subtilis pyrophosphatase) are part of the active site and one (Lys297) is not. The importance of this triplet for catalysis by B. subtilis pyrophosphatase has been estimated by mutational analysis. R295K and K296R substitutions were found to decrease the catalytic constant 650- and 280-fold, respectively, and decrease the pK(a) of the essential acidic group by 1.1 and 0.5, respectively. K297R substitution was found to increase the catalytic constant 4.7-fold and to markedly change the protein circular dichroism spectrum in the range 250-300 nm. These results, together with the results of theoretical modelling of the enzyme-substrate complex, provide support for the direct involvement of Arg295 and Lys296 in substrate binding in family II pyrophosphatases.

Amino Acid Sequence↗
PubMed2000

Catalytically important ionizations along the reaction pathway of yeast pyrophosphatase.

Five catalytic functions of yeast inorganic pyrophosphatase were measured over wide pH ranges: steady-state PP(i) hydrolysis (pH 4. 8-10) and synthesis (6.3-9.3), phosphate-water oxygen exchange (pH 4. 8-9.3), equilibrium formation of enzyme-bound PP(i) (pH 4.8-9.3), and Mg(2+) binding (pH 5.5-9.3). These data confirmed that enzyme-PP(i) intermediate undergoes isomerization in the reaction cycle and allowed estimation of the microscopic rate constant for chemical bond breakage and the macroscopic rate constant for PP(i) release. The isomerization was found to decrease the pK(a) of the essential group in the enzyme-PP(i) intermediate, presumably nucleophilic water, from >7 to 5.85. Protonation of the isomerized enzyme-PP(i) intermediate decelerates PP(i) hydrolysis but accelerates PP(i) release by affecting the back isomerization. The binding of two Mg(2+) ions to free enzyme requires about five basic groups with a mean pK(a) of 6.3. An acidic group with a pK(a) approximately 9 is modulatory in PP(i) hydrolysis and metal ion binding, suggesting that this group maintains overall enzyme structure rather than being directly involved in catalysis.

Binding Sites↗
PubMed2000

Fluoride effects along the reaction pathway of pyrophosphatase: evidence for a second enzyme.pyrophosphate intermediate.

The fluoride ion is a potent and specific inhibitor of cytoplasmic pyrophosphatase (PPase). Fluoride action on yeast PPase during PP(i) hydrolysis involves rapid and slow phases, the latter being only slowly reversible [Smirnova, I. N., and Baykov, A. A. (1983) Biokhimiya 48, 1643-1653]. A similar behavior is observed during yeast PPase catalyzed PP(i) synthesis. The amount of enzyme.PP(i) complex formed from solution P(i) exhibits a rapid drop upon addition of fluoride, followed, at pH 7.2, by a slow increase to nearly 100% of the total enzyme. The slow reaction results in enzyme inactivation, which is not immediately reversed by dilution. These data show that fluoride binds to an enzyme.PP(i) intermediate during the slow phase and to an enzyme.P(i) intermediate during the rapid phase of the inhibition. In Escherichia coli PPase, the enzyme.PP(i) intermediate binds F(-) rapidly, explaining the lack of time dependence in the inhibition of this enzyme. The enzyme.PP(i) intermediate formed during PP(i) hydrolysis binds fluoride much faster (yeast PPase) or tighter (E. coli PPase) than the similar complex existing at equilibrium with P(i). It is concluded that PPase catalysis involves two enzyme.PP(i) intermediates, of which only one (immediately following PP(i) addition and predominating at acidic pH) can bind fluoride. Simulation experiments have indicated that interconversion of the enzyme.PP(i) intermediates is a partially rate-limiting step in the direction of hydrolysis and an exclusively rate-limiting step in the direction of synthesis.

Catalysis↗
PubMed2000

Engineering a new magnesium binding site in the subunit contact region of Escherichia coli inorganic pyrophosphatase.

Three Gln-80 residues belonging to different subunits of homohexameric Escherichia coli pyrophosphatase are separated by only one water molecule to which they are hydrogen bonded. Substitution of Glu for Gln-80 stabilizes quaternary structure of the enzyme but has only a small effect on enzyme activity. The substitution stimulates Mg2+ binding and changes the appearance of the Mg2+ concentration dependence of the rate constant for the trimer --> hexamer transition. These data suggest that a new Mg2+ binding site is formed in the intersubunit contact region as a result of the substitution. Three-dimensional modeling of the mutated protein showed that a chelate complex might form involving two of the three Glu-80 residues.

Amino Acid Substitution↗
PubMed1999

Reciprocal effects of substitutions at the subunit interfaces in hexameric pyrophosphatase of Escherichia coli. Dimeric and monomeric forms of the enzyme.

A homohexameric molecule of Escherichia coli pyrophosphatase is arranged as a dimer of trimers, with an active site present in each of its six monomers. Earlier we reported that substitution of His(136) and His(140) in the intertrimeric subunit interface splits the molecule into active trimers (Velichko, I. S., Mikalahti, K., Kasho, V. N., Dudarenkov, V. Y., Hyytiä, T., Goldman, A., Cooperman, B. S., Lahti, R., and Baykov, A. A. (1998) Biochemistry 37, 734-740). Here we demonstrate that additional substitutions of Tyr(77) and Gln(80) in the intratrimeric interface give rise to moderately active dimers or virtually inactive monomers, depending on pH, temperature, and Mg(2+) concentration. Successive dissociation of the hexamer into trimers, dimers, and monomers progressively decreases the catalytic efficiency (by 10(6)-fold in total), and conversion of a trimer into dimer decreases the affinity of one of the essential Mg(2+)-binding sites/monomer. Disruptive substitutions predominantly in the intratrimeric interface stabilize the intertrimeric interface and vice versa, suggesting that the optimal intratrimeric interaction is not compatible with the optimal intertrimeric interaction. Because of the resulting "conformational strain," hexameric wild-type structure appears to be preformed to bind substrate. A hexameric triple variant substituted at Tyr(77), Gln(80), and His(136) exhibits positive cooperativity in catalysis, consistent with this model.

Amino Acid Substitution↗
PubMed1999

Evolutionary aspects of inorganic pyrophosphatase.

Based on the primary structure, soluble inorganic pyrophosphatases can be divided into two families which exhibit no sequence similarity to each other. Family I, comprising most of the known pyrophosphatase sequences, can be further divided into prokaryotic, plant and animal/fungal pyrophosphatases. Interestingly, plant pyrophosphatases bear a closer similarity to prokaryotic than to animal/fungal pyrophosphatases. Only 17 residues are conserved in all 37 pyrophosphatases of family I and remarkably, 15 of these residues are located at the active site. Subunit interface residues are conserved in animal/fungal but not in prokaryotic pyrophosphatases.

Amino Acid Sequence↗
PubMed1999

Directed mutagenesis studies of the metal binding site at the subunit interface of Escherichia coli inorganic pyrophosphatase.

Recent crystallographic studies on Escherichia coli inorganic pyrophosphatase (E-PPase) have identified three Mg2+ ions/enzyme hexamer in water-filled cavities formed by Asn24, Ala25, and Asp26 at the trimer-trimer interface (Kankare, J., Salminen, T., Lahti, R., Cooperman, B., Baykov, A. A., and Goldman, A. (1996) Biochemistry 35, 4670-4677). Here we show that D26S and D26N substitutions decrease the stoichiometry of tight Mg2+ binding to E-PPase by approximately 0.5 mol/mol monomer and increase hexamer stability in acidic medium. Mg2+ markedly decelerates the dissociation of enzyme hexamer into trimers at pH 5.0 and accelerates hexamer formation from trimers at pH 7.2 with wild type E-PPase and the N24D variant, in contrast to the D26S and D26N variants, when little or no effect is seen. The catalytic parameters describing the dependences of enzyme activity on substrate and Mg2+ concentrations are of the same magnitude for wild type E-PPase and the three variants. The affinity of the intertrimer site for Mg2+ at pH 7.2 is intermediate between those of two Mg2+ binding sites found in the E-PPase active site. It is concluded that the metal ion binding site found at the trimer-trimer interface of E-PPase is a high affinity site whose occupancy by Mg2+ greatly stabilizes the enzyme hexamer but has little effect on catalysis.

Binding Sites↗
PubMed1999

Functional characterization of Escherichia coli inorganic pyrophosphatase in zwitterionic buffers.

Catalysis by Escherichia coli inorganic pyrophosphatase (E-PPase) was found to be strongly modulated by Tris and similar aminoalcoholic buffers used in previous studies of this enzyme. By measuring ligand-binding and catalytic properties of E-PPase in zwitterionic buffers, we found that the previous data markedly underestimate Mg(2+)-binding affinity for two of the three sites present in E-PPase (3.5- to 16-fold) and the rate constant for substrate (dimagnesium pyrophosphate) binding to monomagnesium enzyme (20- to 40-fold). By contrast, Mg(2+)-binding and substrate conversion in the enzyme-substrate complex are unaffected by buffer. These data indicate that E-PPase requires in total only three Mg2+ ions per active site for best performance, rather than four, as previously believed. As measured by equilibrium dialysis, Mg2+ binds to 2.5 sites per monomer, supporting the notion that one of the tightly binding sites is located at the trimer-trimer interface. Mg2+ binding to the subunit interface site results in increased hexamer stability with only minor consequences for catalytic activity measured in the zwitterionic buffers, whereas Mg2+ binding to this site accelerates substrate binding up to 16-fold in the presence of Tris. Structural considerations favor the notion that the aminoalcohols bind to the E-PPase active site.

Binding Sites↗
PubMed1999

Sulfolobus acidocaldarius inorganic pyrophosphatase: structure, thermostability, and effect of metal ion in an archael pyrophosphatase.

The first crystal structure of an inorganic pyrophosphatase (S-PPase) from an archaebacterium, the thermophile Sulfolobus acidocaldarius, has been solved by molecular replacement and refined to an R-factor of 19.7% at 2.7 A. S-PPase is a D3 homohexameric protein with one Mg2+ per active site in a position similar to, but not identical with, the first activating metal in mesophilic pyrophosphatases (PPase). In mesophilic PPases, Asp65, Asp70, and Asp102 coordinate the Mg2+, while only Asp65 and Asp102 do in S-PPase, and the Mg2+ moves by 0.7 A. S-PPase may therefore be deactivated at low temperature by mispositioning a key metal ion. The monomer S-PPase structure is very similar to that of Thermus thermophilus (T-PPase) and Escherichia coli (E-PPase), root-mean-square deviations around 1 A/Calpha. But the hexamer structures of S- and T-PPase are more tightly packed and more similar to each other than they are to that of E-PPase, as shown by the increase in surface area buried upon oligomerization. In T-PPase, Arg116 creates an interlocking ionic network to both twofold and threefold related monomers; S-PPase has hydrophilic interactions to threefold related monomers absent in both E- and T-PPase. In addition, the thermostable PPases have about 7% more hydrogen bonds per monomer than E-PPase, and, especially in S-PPase, additional ionic interactions anchor the C-terminus to the rest of the protein. Thermostability in PPases is thus due to subtle improvements in both monomer and oligomer interactions.

Amino Acid Sequence↗