Search PubMed⌕ Search

Biomedical subjects

R J Levy

Publications and source records attributed to R J Levy.

At least 19 recordsLinked to original sources

Founder's Award, 25th Annual Meeting of the Society for Biomaterials, perspectives. Providence, RI, April 28-May 2, 1999. Tissue heart valves: current challenges and future research perspectives.

Substitute heart valves composed of human or animal tissues have been used since the early 1960s, when aortic valves obtained fresh from human cadavers were transplanted to other individuals as allografts. Today, tissue valves are used in 40% or more of valve replacements worldwide, predominantly as stented porcine aortic valves (PAV) and bovine pericardial valves (BPV) preserved by glutaraldehyde (GLUT) (collectively termed bioprostheses). The principal disadvantage of tissue valves is progressive calcific and noncalcific deterioration, limiting durability. Native heart valves (typified by the aortic valve) are cellular and layered, with regional specializations of the extracellular matrix (ECM). These elements facilitate marked repetitive changes in shape and dimension throughout the cardiac cycle, effective stress transfer to the adjacent aortic wall, and ongoing repair of injury incurred during normal function. Although GLUT bioprostheses mimic natural aortic valve structure (a) their cells are nonviable and thereby incapable of normal turnover or remodeling ECM proteins; (b) their cuspal microstructure is locked into a configuration which is at best characteristic of one phase of the cardiac cycle (usually diastole); and (c) their mechanical properties are markedly different from those of natural aortic valve cusps. Consequently, tissue valves suffer a high rate of progressive and age-dependent structural valve deterioration resulting in stenosis or regurgitation (>50% of PAV overall fail within 10-15 years; the failure rate is nearly 100% in 5 years in those <35 years old but only 10% in 10 years in those >65). Two distinct processes-intrinsic calcification and noncalcific degradation of the ECM-account for structural valve deterioration. Calcification is a direct consequence of the inability of the nonviable cells of the GLUT-preserved tissue to maintain normally low intracellular calcium. Consequently, nucleation of calcium-phosphate crystals occurs at the phospholipid-rich membranes and their remnants. Collagen and elastin also calcify. Tissue valve mineralization has complex host, implant, and mechanical determinants. Noncalcific degradation in the absence of physiological repair mechanisms of the valvular structural matrix is increasingly being appreciated as a critical yet independent mechanism of valve deterioration. These degradation mechanisms are largely rationalized on the basis of the changes to natural valves when they are fabricated into a tissue valve (mentioned above), and the subsequent interactions with the physiologic environment that are induced following implantation. The "Holy Grail" is a nonobstructive, nonthrombogenic tissue valve which will last the lifetime of the patient (and potentially grow in maturing recipients). There is considerable activity in basic research, industrial development, and clinical investigation to improve tissue valves. Particularly exciting in concept, yet early in practice is tissue engineering, a technique in which an anatomically appropriate construct containing cells seeded on a resorbable scaffold is fabricated in vitro, then implanted. Remodeling in vivo, stimulated and guided by appropriate biological signals incorporated into the construct, is intended to recapitulate normal functional architecture.

Animals↗

Mechanisms of bioprosthetic heart valve failure: fatigue causes collagen denaturation and glycosaminoglycan loss.

Bioprosthetic heart valve (BPHV) degeneration, characterized by extracellular matrix deterioration, remodeling, and calcification, is an important clinical problem accounting for thousands of surgeries annually. Here we report for the first time, in a series of in vitro accelerated fatigue studies (5-500 million cycles) with glutaraldehyde fixed porcine aortic valve bioprostheses, that the mechanical function of cardiac valve cusps caused progressive damage to the molecular structure of type I collagen as assessed by Fourier transform IR spectroscopy (FTIR). The cyclic fatigue caused a progressive loss of helicity of the bioprosthetic cuspal collagen, which was evident from FTIR spectral changes in the amide I carbonyl stretching region. Furthermore, cardiac valve fatigue in these studies also led to loss of glycosaminoglycans (GAGs) from the cuspal extracellular matrix. The GAG levels in glutaraldehyde crosslinked porcine aortic valve cusps were 65.2 +/- 8.66 microg uronic acid/10 mg of dry weight for control and 7.91 +/- 1.1 microg uronic acid/10 mg of dry weight for 10-300 million cycled cusps. Together, these molecular changes contribute to a significant gradual decrease in cuspal bending strength as documented in a biomechanical bending assay measuring three point deformation. We conclude that fatigue-induced damage to type I collagen and loss of GAGs are major contributing factors to material degeneration in bioprosthetic cardiac valve deterioration.

Animals↗

Elastin calcification and its prevention with aluminum chloride pretreatment.

Elastin, an abundant structural protein present in the arterial wall, is prone to calcification in a number of disease processes including porcine bioprosthetic heart valve calcification and atherosclerosis. The mechanisms of elastin calcification are not completely elucidated. In the present work, we demonstrated calcification of purified elastin in rat subdermal implants (Ca(2+) = 89.73 +/- 9.84 microgram/mg after 21 days versus control, unimplanted Ca(2+) = 0.16 +/- 0.04 microgram/mg). X-ray diffraction analysis along with resolution enhanced FTIR spectroscopy demonstrated the mineral phase to be a poorly crystalline hydroxyapatite. We investigated the time course of calcification, the effect of glutaraldehyde crosslinking on calcification, and mechanisms of inhibition of elastin calcification by pretreatment with aluminum chloride (AlCl(3)). Glutaraldehyde pretreatment did not affect calcification (Ca(2+) = 89.06 +/- 17.93 microgram/mg for glutaraldehyde crosslinked elastin versus Ca(2+) = 89.73 +/- 9.84 microgram/mg for uncrosslinked elastin). This may be explained by radioactive ((3)H) glutaraldehyde studies showing very low reactivity between glutaraldehyde and elastin. Our results further demonstrated that AlCl(3) pretreatment of elastin led to complete inhibition of elastin calcification using 21-day rat subdermal implants, irrespective of glutaraldehyde crosslinking (Ca(2+) = 0.73-2.15 microgram/mg for AlCl(3) pretreated elastin versus 89.73 +/- 9.84 for untreated elastin). The AlCl(3) pretreatment caused irreversible binding of aluminum ions to elastin, as assessed by atomic emission spectroscopy. Moreover, aluminum ion binding altered the spatial configuration of elastin as shown by circular dichroism (CD), Fourier transform infrared (FTIR), and (13)C nuclear magnetic resonance (NMR) spectroscopy studies, suggesting a net structural change including a reduction in the extent of beta sheet structures and an increase in coil-turn conformations. Thus, it is concluded that purified elastin calcifies in rat subdermal implants, and that the AlCl(3)-pretreated elastin completely resists calcification due to irreversible aluminum ion binding and subsequent structural alterations caused by AlCl(3).

Aluminum Chloride↗

Identification and characterization of calcifying valve cells from human and canine aortic valves.

BACKGROUND AND AIM OF THE STUDY: Cardiac valve calcification is the predominant pathology in patients needing valve replacement. The aim of this study was to determine if aortic valve cells calcify spontaneously and, if so, to characterize the nodular complex and response to growth factors. METHODS: Aortic valves were obtained from humans undergoing surgical valve replacement, and from female dogs. The valvular endothelium was removed and explants cultured in medium. RESULTS: A population of valvular interstitial cells spontaneously formed distinct calcified nodules containing hydroxyapatite within two to three weeks in canine and within six weeks in human aortic valves. The nodules contained an inner ring of dead cells surrounded by an outer ring of living cells. Cells associated with nodules had osteoblast-like characteristics and stained positively for extracellular bone matrix proteins. Incubating canine cells with potential calcifying stimuli tested the stimulus for calcification. The rate of nodule formation was increased with transforming growth factor beta-1 (+25 nodules), 25-hydroxycholesterol (+9 nodules) and bone morphogenetic protein 2 (+4 nodules) as compared with vehicle control (+3 nodules) over 25 days. CONCLUSIONS: We identified a population of valvular interstitial cells with osteoblast-like characteristics that spontaneously form calcific nodules in cell culture. In addition, the rate of calcific nodule formation was increased with transforming growth factor beta-1 and 25-hydroxycholesterol. Further study of these 'calcifying valve cells' may yield a new in vitro model for testing therapy aimed at preventing calcific valve stenosis.

Animals↗

Arterial uptake of biodegradable nanoparticles for intravascular local drug delivery: results with an acute dog model.

Biodegradable nanoparticles (NP) with a spherical diameter ranging from 70 to 160 nm were investigated for potential usefulness for the local intraluminal therapy of restenosis, the disease process responsible for arterial reobstruction following angioplasty. NPs containing a water-insoluble anti-proliferative agent U-86983 (U-86, Pharmacia and Upjohn, Kalamazoo, MI) were formulated from oil-water emulsions using biodegradable polymers such as poly(lactic acid-co-glycolic acid) (PLGA), and specific additives after particle formation, to enhance arterial retention using either heparin, didodecylmethylammonium bromide (DMAB), or fibrinogen, or combinations. Femoral and carotid arteries of male mongrel dogs were isolated in situ, and were then subjected to a balloon angioplasty. A NP suspension of a predetermined concentration was then infused into the artery for various durations. This was followed by a 30 min restoration of blood flow through the vessel. The arterial segments were excised and analyzed for drug levels. From the drug loading the NP and the drug levels in the artery, the quantity of nanoparticles retained was calculated and expressed as microgram per 10 mg dry arteries. In general, repeated short infusions of nanoparticle suspension (15 s x 4) were two-fold more effective in terms of higher arterial U-86 levels than a single prolonged infusion (60 s). A single 15 s infusion was not significantly different than a 60 s compared to non-modified NPs (39.2 +/- 2.5 and 49.1 +/- 2.4 vs. 21.5 +/- 0.6 micrograms/10 mg mean +/- s.e., respectively). A comparably enhanced NP uptake was noted with a combined heparin/DMAB modification. Increasing the concentration of NP in infusate from 5 to 30 mg ml-1 significantly increased arterial NP uptake level (from 22.5 +/- 3.5 to 83.7 +/- 1.4 micrograms/10 mg). Thus, the results support the view that modified nanoparticles along with optimized infusion conditions could enhance arterial wall drug concentrations of agents to treat restenosis.

Angioplasty, Balloon↗

Prevention of calcification of glutaraldehyde-crosslinked porcine aortic cusps by ethanol preincubation: mechanistic studies of protein structure and water-biomaterial relationships.

Clinical usage of bioprosthetic heart valves (BPHVs) fabricated from glutaraldehyde-pretreated porcine aortic valves is restricted due to calcification-related failure. We previously reported a highly efficacious ethanol pretreatment of BPHVs for the prevention of cuspal calcification. The aim of the present study is to extend our understanding of the material changes brought about by ethanol and the relationship of these material effects to the ethanol pretreatment anticalcification mechanism. Glutaraldehyde-crosslinked porcine aortic valve cusps (control and ethanol-pretreated) were studied for the effects of ethanol on tissue water content and for spin-lattice relaxation times (T1) using solid state proton NMR. Cusp samples were studied for protein conformational changes due to ethanol by ATR-FTIR spectroscopy. The changes in cuspal tissue-cholesterol (in vitro) interactions also were studied. Cusp material stability was assessed in terms of residual glutaraldehyde content and collagenase degradation. Water content of the cusp samples was decreased significantly due to ethanol pretreatment. The cuspal collagen conformational changes (per infrared spectroscopy) brought about by ethanol pretreatment were persistent even after rat subdermal implantation of cusp samples for 7 days. In vitro cholesterol uptake by cusps was greatly reduced as a result of ethanol pretreatment. Ethanol pretreatment of cusps also resulted in increased resistance to collagenase digestion. Cuspal glutaraldehyde content was not changed by ethanol pretreatment. We conclude that ethanol pretreatment of bioprosthetic heart valve cusps causes multi-component effects on the tissue/material and macromolecular characteristics, which partly may explain the ethanol-pretreatment anticalcification mechanism.

Animals↗

Inhibition of aortic wall calcification in bioprosthetic heart valves by ethanol pretreatment: biochemical and biophysical mechanisms.

The effectiveness of ethanol pretreatment on preventing calcification of glutaraldehyde-fixed porcine aortic bioprosthetic heart valve (BPHV) cusps was previously demonstrated, and the mechanism of action of ethanol was attributed in part to both lipid removal and a specific collagen conformational change. In the present work, the effect of ethanol pretreatment on BPHV aortic wall calcification was investigated using both rat subdermal and sheep circulatory implants. Ethanol pretreatment significantly inhibited calcification of BPHV aortic wall, but with less than complete inhibition. The maximum inhibition of calcification of BPHV aortic wall was achieved using an 80% ethanol pretreatment; calcium levels were 71.80+/-8.45 microg/mg with 80% ethanol pretreatment compared to the control calcium level of 129.90+/-7.24 microg/mg (p = 0.001). Increasing the duration of ethanol exposure did not significantly improve the inhibitory effect of ethanol on aortic wall calcification. In the sheep circulatory implants, ethanol pretreatment partly prevented BPHV aortic wall calcification with a calcium level of 28.02+/-4.42 microg/mg compared to the control calcium level of 56.35+/-6.14 microg/mg (p = 0.004). Infrared spectroscopy (ATR-FTIR) studies of ethanol-pretreated BPHV aortic wall (vs. control) demonstrated a significant change in protein structure due to ethanol pretreatment. The water content of the aortic wall tissue and the spin-lattice relaxation times (T1) as assessed by proton nuclear magnetic resonance spectroscopy did not change significantly owing to ethanol pretreatment. The optimum condition of 80% ethanol pretreatment almost completely extracted both phospholipids and cholesterol from the aortic wall; despite this, significant calcification occurred. In conclusion, these results clearly demonstrate that ethanol pretreatment is significantly but only partially effective for inhibition of calcification of BPHV aortic wall and this effect may be due in part to lipid extraction and protein structure changes caused by ethanol. It is hypothesized that ethanol pretreatment may be of benefit for preventing bioprosthetic aortic wall calcification only in synergistic combination with another agent.

Animals↗

Arterial uptake of biodegradable nanoparticles: effect of surface modifications.

Restenosis is the reobstruction of an artery following interventional procedures such as balloon angioplasty or stenting. Local pharmacotherapeutic approaches using controlled release systems are under investigation to inhibit the regional pathophysiologic process of restenosis. We have been investigating biodegradable nanoparticles (100 +/- 39 nm in diameter, mean +/- sd) for the local intra-arterial drug delivery. The purpose of this study was to investigate nanoparticle surface modifications (see Table 1) to enhance their arterial uptake. The PLGA (polylactic polyglycolic acid copolymer) nanoparticles were formulated by an oil-in-water emulsion solvent evaporation technique using a 2-aminochromone (U-86983, Upjohn and Pharmacia) (U-86) as a model antiproliferative agent. The various formulations of nanoparticles were evaluated for the arterial wall uptake by using an ex-vivo dog femoral artery model. The selected formulations were then tested in vivo in acute dog femoral artery and pig coronary artery models. The nanoparticles surface modified with a cationic compound, didodecyldimethylammonium bromide (DMAB), demonstrated 7-10-fold greater arterial U-86 levels compared to the unmodified nanoparticles in different ex-vivo and in-vivo studies. The mean U-86 levels were 10.7 +/- 1.7 microg/10 mg (dog) and 6.6 +/- 0.6 microg/10 mg (pig) in the artery segments ( approximately 2 cm) which were infused with the nanoparticles. The pig coronary studies further demonstrated that the infusion of nanoparticles with higher U-86 loading reduced the arterial U-86 levels, whereas increasing the nanoparticle concentration in the infusion solutions increased the arterial U-86 levels. The biodistribution studies in pigs following coronary arterial administration of nanoparticles demonstrated disposition of U-86 in the myocardium and distally in the liver and the lung. The mechanism of enhanced arterial uptake of the DMAB surface modified nanoparticles seems to be due to the alteration in the nanoparticle surface charge. The unmodified nanoparticles had a zeta potential of -27.8 +/- 0.5 mV (mean +/- sem, n = 5), whereas the DMAB modified nanoparticles demonstrated a zeta potential of +22.1 +/- 3.2 mV (mean +/- sem, n = 5). The adsorption of DMAB to the nanoparticle surface followed the Freundlich isotherm with binding capacity k = 28.1 microg/mg and affinity constant p = 2. 33. In conclusion, surface modified nanoparticles have potential applications for intra-arterial drug delivery to localize therapeutic agents in the arterial wall to inhibit restenosis.

Animals↗

A DNA controlled-release coating for gene transfer: transfection in skeletal and cardiac muscle.

In this paper we report a novel technique of DNA-polymer coating for gene transfer. A proprietary DNA polymer solution was used for thin-layer coating on a chromic gut suture as a model study. The coated sutures were characterized for physical properties such as coating thickness, mass of the DNA deposited on the suture, surface characteristics as determined by scanning electron microscopy, and in vitro DNA release characteristics under simulated physiologic conditions. The in vivo gene transfection using DNA-coated sutures was demonstrated in rat skeletal muscle and in canine atrial myocardium. A heat-stable human placental alkaline phosphatase (AP) plasmid was used as a marker gene. Incisions of 1 to 1.5 cm were made in the rat skeletal muscles or the canine atrial myocardium. The sites were closed with either the DNA-coated sutures or control sutures. Two weeks after the surgery, the tissue samples adjacent to the suture lines were retrieved and analyzed for AP activity. The DNA-coated sutures demonstrated a sustained release of the DNA under in vitro conditions, with an approximately 84% cumulative DNA release occurring in 26 days. An agarose gel electrophoresis of the DNA samples released from the suture demonstrated two bands, with the lower band corresponding to the input DNA (supercoiled). It seems that there was a partial transformation of the DNA from a supercoiled to an open circular form due to the polymer coating. The tissue sites, which received the DNA-coated sutures, demonstrated a significantly higher AP activity compared with the tissue sites that received control sutures. In the rat studies, the mean AP activity (square root of cpm/microgram protein) was 43.6 +/- 3.3 vs 20.6 +/- 2.1 (p = 0.001) at the control sites. Similarly, in the canine studies, the AP activity was 73.6 +/- 7.4 Vs 21.6 +/- 1.4 (p = 0.0009) at the control sites. Thus, our studies demonstrated a successful gene transfer using our DNA-polymer coating technique. This technique could be useful for coating sutures used in vascular and general surgery, and also for coating medical devices, such as stents, catheters, or orthopedic devices, to achieve a site-specific gene delivery.

Animals↗

Prevention of acute inducible atrial flutter in dogs by using an ibutilide-polymer-coated pacing electrode.

Atrial arrhythmias (atrial fibrillation or atrial flutter) after coronary artery bypass graft surgery are difficult to prevent or treat and often result in significant morbidity. Prior experimental studies by our group showed improved therapeutic efficacy for antiarrhythmic drugs delivered via controlled-release polymeric matrices implanted on the epicardial surface. These experiments were conducted to test the hypothesis that direct atrial epicardial administration of ibutilide from a controlled-release system (compared with intravenous administration) can reduce the inducibility of atrial flutter in the acute postoperative atrial myocardium. Polymeric sustained-release preparations were formulated by solvent casting of an ibutilide and polyurethane (Pellathane) solution in tetrahydrofurane. Multilayer solvent-casted coatings on pacing electrode wires were carried out to fabricate a sustained-release electrode system. In animal model studies, each dog underwent a thoracotomy, followed by a right atriotomy that was repaired. Induction of atrial flutter was attempted by burst pacing with the bipolar pacing catheter. Sinus rhythm was restored with overdrive pacing. After determining the induction rate (percentage) of atrial flutter in the baseline state, a stainless-steel wire coated with the drug-delivery system, 10% ibutilide/90% polyurethane (n = 7), or without drug (polyurethane coating without ibutilide, n = 5; control) was sewn onto the right atrium. Systemic intravenous administration of ibutilide (1.2 microg/kg/h) also was carried out in a separate group of animals after atriotomy (n = 5). For ibutilide (at an estimated dose of 1.2 microg/kg/h), the atrial-flutter results were 41.85 +/- 2.21% induction for baseline compared with 12.42 +/- 5.26% (p = 0.02) after the ibutilide wire implant. In the control dogs, atrial flutter was induced 29.4 +/- 4.7% at baseline and 25.2 +/- 5.1% after implantation of the control wire (p = 0.4). Ibutilide coronary venous serum concentrations at the end of the ibutilide-polyurethane electrode experiments were 2.25 +/- 0.2 ng/ml (mean +/- SEM) versus systemic levels that were below the limits of detection. Systemic intravenous ibutilide infusions had no effect on the inducibility of atrial flutter. In conclusion, an epicardial implantable electrode coating with an ibutilide controlled drug-release system significantly reduced the inducibility of atrial flutter in an experimental atriotomy model. These results suggest that atrial arrhythmias occurring after coronary bypass surgery may be prevented by local atrial administration of ibutilide from a controlled-release pacing electrode.

Animals↗

Diabetes and transport: a potentially bittersweet combination.

These cases represent a portion of the spectrum of medical issues that may be seen in patients with a diagnosis of IDDM. As the first case suggests, knowledge of the disease process and an expanded differential diagnosis is imperative when acting as medical command for these patients. Interfacility transport does not only involve rapid and safe transport between institutions, but must also offer the highest level of expertise available for the referring physician and the patient. For this reason, we recommend the immediate availability of a senior level experienced pediatric physician for involvement in all but the most routine pediatric interfacility transports. Rapid recognition at the time of initial presentation or transport of the correct diagnosis in patient one may have altered potential outcome. Case 2 represents a potential untoward outcome which might be potentiated or exacerbated by the care given during transport. Although this patient's transport time was short, a similar patient may present who needs prolonged transport. The patient might also present to the transport service prior to neurologic deterioration. One must be prepared to intervene for all potential complications as they arise. Case 3 represents a patient whose physical examination suggested more intense therapy was needed than is offered by many DKA protocols. It is important to listen to what the patients are trying to tell us, rather than relying strictly on protocols or guidelines. While protocols or guidelines offer a menu of potential therapies, one must be prepared to vary from these guidelines if suggested by the patient's condition. Recognition of delayed capillary refill in patient 3 allowed for an increase in fluid administration and rapid patient improvement. While not evident with the presented short transports, the use of point of care testing in a transport vehicle can be useful for these types of patients. The opportunity to closely monitor blood chemistry evaluations and gasses can give insight about an ongoing process, suggest therapies, and help direct interventions that, in the past, often waited until the patient arrived at the receiving hospital. That additional information can be invaluable for the ill patient whose outcome may hinge on early recognition of subtle changes with subsequent appropriate interventions.

Brain Edema↗

Differential calcification of cusps and aortic wall of failed stented porcine bioprosthetic valves.

In this study, we examined separately calcification of cusps (C) and associated aortic wall (AW) of 38 (13 aortic and 25 mitral) porcine bioprosthetic heart valves explanted from 37 patients (ages 25-80 years, mean 59) for structural dysfunction, following 54-210 months (mean 125 months aortic, 119 months mitral). Valves were sectioned into C and corresponding AW components; calcification was assessed by atomic absorption spectroscopy for calcium and histologic examination. Overall, AW calcification was half that of C (33.3 +/- 5.4 vs. 65.9 +/- 6.3 microg/mg, mean +/- standard error of the mean respectively, p = 0.002). Correlation of calcification in individual C/AW pairs was weak (r2 = 0.34). Calcification in C was nodular, largely in the valve fibrosa, but AW calcification predominated in the cells between elastic lamellae; large nodules were sparse. We conclude that since AW calcification in these failed porcine valves was neither prominent nor clinically significant, this process should rarely if ever be a limiting factor in the function of stented porcine valves, and that development of anticalcification therapies directed toward the AW of stented valves should be of low priority. However, in stent-free valves, the AW is not covered by prosthetic material, and the level of calcification could be greater and more likely to cause clinical problems through stiffening, embolism, and/or protrusion into the lumen of calcific masses.

Adult↗

Capillary electrophoresis of supercoiled and linear DNA in dilute hydroxyethyl cellulose solution.

Capillary electrophoresis in dilute hydroxyethyl cellulose is shown to separate supercoiled DNA in the size range 2000-16,000 base pairs. The plasmids migrate more slowly than linear ds-DNA of the same sizes. Plasmid bandwidths are larger than observed for ds-DNA, allowing identification of the type of DNA by bandwidth. The differing dependence of mobility on chain length can be explained by assuming that a plasmid migrates as an elastic rod, while ds-DNA migrates as a wormlike chain.

Cellulose↗

Prevention of bioprosthetic heart valve calcification by ethanol preincubation. Efficacy and mechanisms.

BACKGROUND: Calcification of the cusps of bioprosthetic heart valves fabricated from either glutaraldehyde cross-linked porcine aortic valves or bovine pericardium frequently causes the clinical failure of these devices. Our investigations studied ethanol pretreatment of glutaraldehyde cross-linked porcine aortic valves as a new approach to prevent cuspal calcification. The hypothesis governing this approach holds that ethanol pretreatment inhibits calcification resulting from protein structural alterations and lipid extraction. METHODS AND RESULTS: Results demonstrated complete inhibition of calcification of glutaraldehyde-pretreated porcine bioprosthetic aortic valve cusps by 80.0% ethanol in rat subdermal implants (60-day ethanol-pretreated calcium level, 1.87 +/- 0.29 micrograms/mg tissue compared with control calcium level, 236.00 +/- 6.10 micrograms/mg tissue) and in sheep mitral valve replacements (ethanol-pretreated calcium level, 5.22 +/- 2.94 micrograms/mg tissue; control calcium level, 32.50 +/- 11.50 micrograms/mg tissue). The mechanism of ethanol inhibition may be explained by several observations: ethanol pretreatment resulted in an irreversible alteration in the amide I band noted in the infrared spectra for both purified type I collagen and glutaraldehyde cross-linked porcine aortic leaflets. Ethanol pretreatment also resulted in nearly complete extraction of leaflet cholesterol and phospholipid. CONCLUSIONS: Ethanol pretreatment of glutaraldehyde cross-linked porcine aortic valve bioprostheses represents a highly efficacious and mechanistically based approach and may prevent calcific bioprosthetic heart valve failure.

Animals↗

Synergistic inhibition of calcification of porcine aortic root with preincubation in FeCl3 and alpha-amino oleic acid in a rat subdermal model.

Postimplant calcific degeneration is a frequent cause of clinical failure of glutaraldehyde crosslinked porcine aortic valve bioprostheses. We demonstrated previously in rat subdermal and circulatory implants that alpha-amino oleic acid used as a bioprosthesis pretreatment was highly effective in mitigating aortic valve cusp but not aortic wall calcification. In this study we investigated the feasibility of synergistically applying two proven anticalcification agents (alpha-amino oleic acid and FeCl3) as pretreatments for mitigating both bioprosthetic cusp and aortic wall calcification. alpha-Amino oleic acid is hypothesized to prevent calcification by disrupting calcium phosphate formation kinetics, whereas suppression of alkaline phosphatase activity and ferric-phosphate complexation at a cellular membrane initiation sites may be important factors in ferric ion's inhibition of calcification. In vivo implant studies (21-day rat subdermal model) indicated that individually FeCl3 (0.01 or 0.1 M for 24 h) or alpha-amino oleic acid (saturated solution) treatments were equally effective in mitigating cuspal calcification (tissue calcium levels: 30.2 +/- 10.2, 29.8 +/- 2.7, and 31.6 +/- 7.8 micrograms/mg tissue, respectively). However, sequential application of first alpha-amino oleic acid and then FeCl3 synergistically reduced aortic wall calcification more effectively than either of the agents alone. The benefit of a synergistic application of two anticalcification treatments, alpha-amino oleic acid and FeCl3, was demonstrated. However, the synergistic effect was observed on aortic wall only at a higher FeCl3 concentration. (i.e., 0.1 M).

Animals↗

Influence of local delivery of the protein tyrosine kinase receptor inhibitor tyrphostin-47 on smooth-muscle cell proliferation in a rat carotid balloon-injury model.

Smooth-muscle cell proliferation in response to arterial injury represents an important etiologic factor in restenosis after angioplasty. Tyrphostin-47, a protein tyrosine kinase inhibitor, inhibits smooth-muscle cell proliferation in vitro. In this study tyrphostin-47 was incorporated into matrixes to determine whether prolonged local delivery would result in a reduction of neointimal proliferation after arterial injury in a rat carotid balloon-injury model. A polymer matrix (polylactic polyglycolic acid copolymer and pluronic gel F-127, mean matrix weight 7.83 +/- 0.39 mg) was loaded with tyrphostin-47 (25% w/w). Release studies demonstrated delivery of 11% of the incorporated drug over a 21-day release period. In cell culture, tyrphostin-47 released from the polymer matrix produced a reduction in smooth-muscle cell proliferation (p < 0.0007). Balloon denudation injury of the left common carotid artery of 34 animals was performed. In 12 animals, polymer matrixes containing tyrphostin-47 were wrapped around the injured arteries to provide prolonged drug delivery (estimated dosage 28 micrograms/kg/24 hr); in 10 animals a polymer matrix without tyrphostin-47 was implanted; and in 12 animals only balloon injury was performed. The mean neointimal cross-sectional areas, luminal areas, and intima/media ratios were not significantly different among animals receiving local treatment with tyrphostin-47, sham polymer after injury, or balloon injury without polymer implantation. We conclude that despite inhibition of smooth-muscle cell proliferation by tyrphostin-47 in vitro, sustained local delivery of this tyrosine kinase inhibitor does not result in a reduction of neointimal proliferation in the rat carotid injury model.

Animals↗

Refinement of the alpha aminooleic acid bioprosthetic valve anticalcification technique.

BACKGROUND: Aminooleic acid treatment has been demonstrated to prevent porcine valve calcification and to protect valvular hemodynamic function. Initial enthusiasm was tempered by histologic studies of these AOA valves, which showed cuspal hematomas, structural loosening, and surface roughening. This prompted a systematic review of the AOA treatment process. Unsolubilized particles of alpha aminooleic acid present in the treatment solution were identified as the cause of mechanical abrasion of valve cusps during processing. These particles were eliminated with a revamped protocol, which included filtration of the AOA solution before valve preparation. METHODS: Porcine aortic valve cusps treated with this modified AOA protocol (AOA II) were studied in a rat subdermal implant model of mineralization. A juvenile sheep trial was then used to confirm the antimineralization effects of AOA II on glutaraldehyde-fixed porcine aortic roots in a circulatory model of accelerated calcification. RESULTS: Retrieved AOA II-treated cusps from the subdermal model were markedly less calcified than control cusps (AOA II, 1 +/- 0, 17 +/- 4, 23 +/- 6, and 17 +/- 10 versus control, 189 +/- 14, 251 +/- 16, 250 +/- 14, and 265 +/- 10 mg calcium/mg sample at 4, 8, 12, and 16 weeks, respectively; p < 0.0001). Morphologic examination of the AOA II cusps of the valves retrieved from the sheep demonstrated freedom from the structural loosening, surface roughening, and hematoma formation that had limited the utility of the original AOA preparation technique. Cusps from AOA II-treated porcine roots had significantly less calcium than control cusps (AOA II, 5.5 +/- 3.0 mg/g; control, 91.2 +/- 19.5 mg/g; p = 0.0004). The aortic walls had similar levels of calcification (AOA II, 156 +/- 73 mg/g; control, 159 +/- 10 mg/g; p = not significant). CONCLUSIONS: These data suggest that the modified AOA technique warrants further evaluation as an antimineralization treatment for glutaraldehyde-fixed porcine bioprostheses.

Animals↗