Search PubMed⌕ Search

Biomedical subjects

R H Waterston

Publications and source records attributed to R H Waterston.

At least 37 records · Page 2Linked to original sources

Representation of cloned genomic sequences in two sequencing vectors: correlation of DNA sequence and subclone distribution.

Representation of subcloned Caenorhabditis elegans and human DNA sequences in both M13 and pUC sequencing vectors was determined in the context of large scale genomic sequencing. In many cases, regions of subclone under-representation correlated with the occurrence of repeat sequences, and in some cases the under-representation was orientation specific. Factors which affected subclone representation included the nature and complexity of the repeat sequence, as well as the length of the repeat region. In some but not all cases, notable differences between the M13 and pUC subclone distributions existed. However, in all regions lacking one type of subclone (either M13 or pUC), an alternate subclone was identified in at least one orientation. This suggests that complementary use of M13 and pUC subclones would provide the most comprehensive subclone coverage of a given genomic sequence.

Animals↗

High throughput fingerprint analysis of large-insert clones.

As part of the Human Genome Project, the Washington University Genome Sequencing Center has commenced systematic sequencing of human chromsome 7. To organize and supply the effort, we have undertaken the construction of sequence-ready physical maps for defined chromosomal intervals. Map construction is a serial process composed of three main activities. First, candidate STS-positive large-insert PAC and BAC clones are identified. Next, these candidate clones are subjected to fingerprint analysis. Finally, the fingerprint data are used to assemble sequence-ready maps. The fingerprinting method we have devised is key to the success of the overall approach. We present here the details of the method and show that the fingerprints are of sufficient quality to permit the construction of megabase-size contigs in defined regions of the human genome. We anticipate that the high throughput and precision characteristic of our fingerprinting method will make it of general utility.

Base Sequence↗

Interaction between a putative mechanosensory membrane channel and a collagen.

The degenerin family of proteins in Caenorhabditis elegans is homologous to subunits of the mammalian amiloride-sensitive epithelial sodium channels. Mutations in nematode degenerins cause cell death, probably because of defects in channel function. Genetic evidence was obtained that the unc-105 gene product represents a degenerin homolog affecting C. elegans muscles and that this putative channel interacts with type IV collagen in the extracellular matrix underlying the muscle cell. This interaction may serve as a mechanism of stretch-activated muscle contraction, and this system could provide a molecular model for the activation of mechanosensitive ion channels.

Alleles↗

Movement of cortical actin patches in yeast.

In yeast, actin forms patches associated with the plasma membrane. Patch distribution correlates with polarized growth during the cell cycle and in response to external stimuli. Using green fluorescent protein fused to capping protein to image actin patches in living cells, we find that patches move rapidly and over long distances. Even patches in clusters, such as at the incipient bud site, show movement. Patches move independently of one another and generally over small distances in a local area, but they can also move larger distances, including through the mother-bud neck. Changes in patch polarization occur quickly through the cell cycle. These observations provide important new parameters for a molecular analysis of the regulation and function of actin.

Actins↗

Hydrophobicity variations along the surface of the coiled-coil rod may mediate striated muscle myosin assembly in Caenorhabditis elegans.

Caenorhabditis elegans body wall muscle contains two isoforms of myosin heavy chain, MHC A and MHC B, that differ in their ability to initiate thick filament assembly. Whereas mutant animals that lack the major isoform, MHC B, have fewer thick filaments, mutant animals that lack the minor isoform, MHC A, contain no normal thick filaments. MHC A, but not MHC B, is present at the center of the bipolar thick filament where initiation of assembly is thought to occur (Miller, D.M.,I. Ortiz, G.C. Berliner, and H.F. Epstein. 1983. Cell. 34:477-490). We mapped the sequences that confer A-specific function by constructing chimeric myosins and testing them in vivo. We have identified two distinct regions of the MHC A rod that are sufficient in chimeric myosins for filament initiation function. Within these regions, MHC A displays a more hydrophobic rod surface, making it more similar to paramyosin, which forms the thick filament core. We propose that these regions play an important role in filament initiation, perhaps mediating close contacts between MHC A and paramyosin in an antiparallel arrangement at the filament center. Furthermore, our analysis revealed that all striated muscle myosins show a characteristic variation in surface hydrophobicity along the length of the rod that may play an important role in driving assembly and determining the stagger at which dimers associate.

Amino Acid Sequence↗

Talin requires beta-integrin, but not vinculin, for its assembly into focal adhesion-like structures in the nematode Caenorhabditis elegans.

In cultured cells, the 230-kDa protein talin is found at discrete plasma membrane foci known as focal adhesions, sites that anchor the intracellular actin cytoskeleton to the extracellular matrix. The regulated assembly of focal adhesions influences the direction of cell migrations or the reorientation of cell shapes. Biochemical studies of talin have shown that it binds to the proteins integrin, vinculin, and actin in vitro. To understand the function of talin in vivo and to correlate its in vitro and in vivo biochemical properties, various genetic approaches have been adopted. With the intention of using genetics in the study of talin, we identified a homologue to mouse talin in a genetic model system, the nematode Caenorhabditis elegans. C. elegans talin is 39% identical and 59% similar to mouse talin. In wild-type adult C. elegans, talin colocalizes with integrin, vinculin, and alpha-actinin in the focal adhesion-like structures found in the body-wall muscle. By examining the organization of talin in two different C. elegans mutant strains that do not make either beta-integrin or vinculin, we were able to determine that talin does not require vinculin for its initial organization at the membrane, but that it depends critically on the presence of integrin for its initial assembly at membrane foci.

Actins↗

The nematode Caenorhabditis elegans and its genome.

Over the past two decades, the small soil nematode Caenorhabditis elegans has become established as a major model system for the study of a great variety of problems in biology and medicine. One of its most significant advantages is its simplicity, both in anatomy and in genomic organization. The entire haploid genetic content amounts to 100 million base pairs of DNA, about 1/30 the size of the human value. As a result, C. elegans has also provided a pilot system for the construction of physical maps of larger animal and plant genomes, and subsequently for the complete sequencing of those genomes. By mid-1995, approximately one-fifth of the complete DNA sequence of this animal had been determined. Caenorhabditis elegans provides a test bed not only for the development and application of mapping and sequencing technologies, but also for the interpretation and use of complete sequence information. This article reviews the progress so far toward a realizable goal--the total description of the genome of a simple animal.

Animals↗

The construction and analysis of M13 libraries prepared from YAC DNA.

Yeast artificial chromosomes (YACs) provide a powerful way to isolate and map large regions of genomic DNA and their use in genome analysis is now extensive. We modified a series of procedures to produce high quality shotgun libraries from small amounts of YAC DNA. Clones from several different libraries have been sequenced and analyzed for distribution, sequence integrity and degree of contamination from yeast DNA. We describe these procedures and analyses and show that sequencing at about 1-fold coverage, followed by database comparison (survey sequencing) offers a relatively quick method to determine the nature of previously uncharacterized cosmid or YAC clones.

Bacteriophage M13↗

Genomic structure of a cytoplasmic dynein heavy chain gene from the nematode Caenorhabditis elegans.

We report the cloning and sequencing of genomic DNA encoding a cytoplasmic dynein heavy chain from the nematode Caenorhabditis elegans. In a contiguous stretch of 35,103 bp of DNA from the left arm of linkage group I, we have found a gene that is predicted to encode a protein of 4,568 amino acids. This gene is composed of 15 exons and 14 relatively short introns, and it has significant homology to the other dynein heavy chains in the databases. The deduced molecular mass of the derived polypeptide is 512,624 Da. As with other dynein heavy chains that have been sequenced to date, it contains four GXXGXGK(S/T) motifs that form part of a consensus sequence for the nucleotide triphosphate-binding domains. Comparison of the axonemal and cytoplasmic dynein heavy chains shows that regions of homology among all dyneins are clustered in the carboxyl terminal two-thirds of the polypeptide, whereas the amino terminal one-third of the heavy chains may contain domains that specify functions that differ between the axonemal and cytoplasmic forms of the dynein heavy chain.

Animals↗

Genes critical for muscle development and function in Caenorhabditis elegans identified through lethal mutations.

By taking advantage of a lethal phenotype characteristic of Caenorhabditis elegans embryos that fail to move, we have identified 13 genes required for muscle assembly and function and discovered a new lethal class of alleles for three previously known muscle-affecting genes. By staining mutant embryos for myosin and actin we have recognized five distinct classes of genes: mutations in four genes disrupt the assembly of thick and thin filaments into the myofilament lattice as well as the polarized location of these components to the sarcolemma. Mutations in another three genes also disrupt thick and thin filament assembly, but allow proper polarization of lattice components based on the myosin heavy chain isoform that we analyzed. Another two classes of genes are defined by mutations with principal effects on thick or thin filament assembly into the lattice, but not both. The final class includes three genes in which mutations cause relatively minor defects in lattice assembly. Failure of certain mutants to stain with antibodies to specific muscle cell antigens suggest that two genes associated with severe disruptions of myofilament lattice assembly may code for components of the basement membrane and the sarcolemma that are concentrated where dense bodies (Z-line analogs) and M-lines attach to the cell membrane. Similar evidence suggests that one of the genes associated with mild effects on lattice assembly may code for tropomyosin. Many of the newly identified genes are likely to play critical roles in muscle development and function.

Actins↗

Assembly of body wall muscle and muscle cell attachment structures in Caenorhabditis elegans.

C. Elegans has four muscle quadrants that are used for locomotion. Contraction is converted to locomotion because muscle cells are anchored to the cuticle (the outer covering of the worm) by a specialized basement membrane and hemidesmosome structures in the hypodermis (a cellular syncytium that covers the worm and secretes the cuticle). To study muscle assembly, we have used antibodies to determine the spatial and temporal distribution of muscle and attachment structure components in wild-type and mutant C. elegans embryos. Myofibrillar components are first observed diffusely distributed in the muscle cells, and are expressed in some dividing cells. Later, the components accumulate at the membrane adjacent to the hypodermis where the sarcomeres will form, showing that the cells have become polarized. Assembly of muscle attachment structures is spatially and temporally coordinated with muscle assembly suggesting that important developmental signals may be passed between muscle and hypodermal cells. Analysis of embryos homozygous for mutations that affect muscle assembly show that muscle components closer to the membrane than the affected protein assemble quite well, while those further from the membrane do not. Our results suggest a model where lattice assembly is initiated at the membrane and the spatial organization of the structural elements of the muscle is dictated by membrane proximal events, not by the filament components themselves.

Animals↗

The Caenorhabditis elegans UNC-87 protein is essential for maintenance, but not assembly, of bodywall muscle.

Mutations in the unc-87 gene of Caenorhabditis elegans cause disorganization of the myofilament lattice in adult bodywall muscle. In order to assess the organization of specific bodywall muscle components in the absence of the unc-87 gene product, we examined the bodywall muscles of mutant animals using phalloidin and monoclonal antibodies to various muscle proteins. These studies indicated that the bodywall muscle of unc-87 embryos is initially almost wild type in its organization, but at later stages, the muscle becomes severely disorganized. To address the possibility that this disorganization is due to deterioration of the muscle as a result of contraction, we introduced into the unc-87 mutant background a mutation that decreases myosin heavy chain activity but does not substantially affect muscle structure. The improved muscle structure and motility of the double mutants are consistent with the hypothesis that at least part of the disorganization phenotype of unc-87 mutants is a consequence of the wild-type levels of force generated during muscle contraction. These results imply that the role of the unc-87 gene product is not in specifying organization but rather in serving as a structural component maintaining lattice integrity during and after contraction.

Actin Cytoskeleton↗

The Caenorhabditis elegans muscle-affecting gene unc-87 encodes a novel thin filament-associated protein.

Mutations in the unc-87 gene of Caenorhabditis elegans affect the structure and function of bodywall muscle, resulting in variable paralysis. We cloned the unc-87 gene by taking advantage of a transposon-induced allele of unc-87 and the correspondence of the genetic and physical maps in C. elegans. A genomic clone was isolated that alleviates the mutant phenotype when introduced into unc-87 mutants. Sequence analysis of a corresponding cDNA clone predicts a 357-amino acid, 40-kD protein that is similar to portions of the vertebrate smooth muscle proteins calponin and SM22 alpha, the Drosophila muscle protein mp20, the deduced product of the C. elegans cDNA cm7g3, and the rat neuronal protein np25. Analysis of the genomic sequence and of various transcripts represented in a cDNA library suggest that unc-87 mRNAs are subject to alternative splicing. Immunohistochemistry of wildtype and mutant animals with antibodies to an unc-87 fusion protein indicates that the gene product is localized to the I-band of bodywall muscle. Studies of the UNC-87 protein in other muscle mutants suggest that the unc-87 gene product associates with thin filaments, in a manner that does not depend on the presence of the thin filament protein tropomyosin.

Actin Cytoskeleton↗

Transient localized accumulation of actin in Caenorhabditis elegans blastomeres with oriented asymmetric divisions.

During Caenorhabditis elegans embryogenesis, specific cells in the P1 lineage rotate their duplicated centrosome pair onto the anterior-posterior axis; this rotation is correlated with and necessary for a differential inheritance of cytoplasmic determinants in the daughter cells. Centrosome pair rotation is sensitive to inhibitors of actin and microtubule polymerization and may require microtubule attachment to a specific cortical site. We show that actin and the barbed-end binding protein, capping protein, transiently accumulate at this cortical site, possibly by assembly onto persistent remnants of previous cell divisions. Based on these observations, we propose a model for the molecular basis of centrosome rotation that is consistent with the dependence of rotation on actin filaments and microtubules.

Actins↗

The alpha and beta subunits of nematode actin capping protein function in yeast.

We cloned and analyzed two genes, cap-1 and cap-2, which encode the alpha and beta subunits of Caenorhabditis elegans capping protein (CP). The nematode CP subunits are 55% (cap-1) and 66% (cap-2) identical to the chicken CP subunits and 32% (cap-1) and 48% (cap-2) identical to the yeast CP subunits. Purified nematode CP made by expression of both subunits in yeast is functionally similar to chicken skeletal muscle CP in two different actin polymerization assays. The abnormal cell morphology and disorganized actin cytoskeleton of yeast CP null mutants are restored to wild-type by expression of the nematode CP subunits. Expression of the nematode CP alpha or beta subunit is sufficient to restore viability to yeast cap1 sac6 or cap2 sac6 double mutants, respectively. Therefore, despite evolution of the nematode actin cytoskeleton to a state far more complex than that of yeast, one important component can function in both organisms.

Actin Capping Proteins↗

A genetic mapping system in Caenorhabditis elegans based on polymorphic sequence-tagged sites.

We devised an efficient genetic mapping system in the nematode Caenorhabditis elegans which is based upon the differences in number and location of the transposable element Tc1 between the Bristol and Bergerac strains. Using the nearly completed physical map of the C. elegans genome, we selected 40 widely distributed sites which contain a Tc1 element in the Bergerac strain, but not in the Bristol strain. For each site a polymerase chain reaction assay was designed that can distinguish between the Bergerac Tc1-containing site and the Bristol "empty" site. By combining appropriate assays in a single reaction, one can score multiple sites within single worms. This permits a mutation to be rapidly mapped, first to a linkage group and then to a chromosomal subregion, through analysis of only a small number of progeny from a single interstrain cross.

Animals↗