Search PubMed⌕ Search

Biomedical subjects

R H Hoess

Publications and source records attributed to R H Hoess.

34 records · Page 2Linked to original sources
PubMed1987

Nucleotide sequence of the Escherichia coli mutH gene.

The complete nucleotide sequence of mutH gene from E. coli has been determined. Based on the deduced amino acid sequence, the MutH protein has a molecular weight of 25.4 kdaltons in agreement with the previous estimates based on SDS-polyacrylamide gel electrophoresis of the purified protein. Deletion analysis of the DNA sequences upstream of mutH has identified the promoter region for this gene. Two independently isolated temperature sensitive alleles of the mutH gene have also been sequenced. One mutation results in an amino acid change at position 27 (thr to leu) while the other occurs at position 156 (asp to asn).

Amino Acid Sequence↗
PubMed1986

Linking-number changes in the DNA substrate during Cre-mediated loxP site-specific recombination.

We have examined the linking-number changes that occur during phage P1 Cre-mediated recombination in vitro between two loxP sites. Such recombination reactions can be divided into three types: intramolecular inversion, in which recombination occurs between two loxP sites in opposite orientations on the same DNA substrate; intramolecular excision, where recombination occurs between two loxP sites that are in the same orientation on the DNA substrate; and intermolecular recombination, which occurs between two loxP sites on separate DNA molecules. Our results indicate that inversion changes the linking number of the substrate DNA by two topological turns. With a negatively supercoiled substrate, the product is changed by +2 turns. A relaxed substrate yields products that have been changed by either +2 or -2 turns. For intermolecular reactions, the sum of the linking numbers of each of the two starting circles is equal to the linking number of the dimer circle generated by recombination, and no change occurs in linking number. For intramolecular excision reactions, the data are most consistent, with no change in linking number during recombination. These results are discussed in terms of models for alignment and synapsis of the recombining sites and the mechanism of strand exchange.

Bacteriophages↗
PubMed1986

The role of the loxP spacer region in P1 site-specific recombination.

The lox-Cre site-specific recombination system of bacteriophage P1 is comprised of a site on the DNA where recombination occurs called loxP, and a protein, Cre, which mediates the reaction. The loxP site is 34 base pairs (bp) in length and consists of two 13 bp inverted repeats separated by an 8 bp spacer region. Previously it has been shown that the cleavage and strand exchange of recombining loxP sites occurs within this spacer region. We report here an analysis of various base substitution mutations within the spacer region of loxP, and conclude the following: Homology is a requirement for efficient recombination between recombining loxP sites. There is at least one position within the spacer where a base change drastically reduces recombination even when there is homology between the two recombining loxP sites. When two loxP sites containing symmetric spacer regions undergo Cre-mediated recombination in vitro, the DNA between the sites undergoes both excision and inversion with equal frequency.

Bacterial Proteins↗
PubMed1986

Bacteriophage P1 Cre-loxP site-specific recombination. Site-specific DNA topoisomerase activity of the Cre recombination protein.

Site-specific recombination in bacteriophage P1 occurs between two loxP sites in the presence of the Cre recombination protein. The structure of the 34-base pair loxP site consists of two 13-base pair inverted repeats separated by an 8-base pair spacer region. A mutation in the loxP site has been constructed which deletes one of the internal bases of the spacer region at the axis of dyad symmetry. This mutant loxP site shows a 10-fold reduction in recombination activity with a wild-type site both in vivo and in vitro. This low level of intramolecular recombination between a wild-type loxP site and the mutant loxP501 site is observed in vitro only when the DNA substrate is supercoiled. The majority of the supercoiled substrate is relaxed by the Cre protein, and on longer incubations, single-stranded nicks accumulate in the DNA. We have determined that these nicks occur in both the wild-type and the mutant sites. The positions of these nicks correspond to the positions of cleavage found during recombination of two wild-type sites, suggesting that the Cre protein is attempting to carry out recombination with the mutant site but most of the time this reaction is abortive. We have determined that the Cre protein relaxes a supercoiled topoisomer of a DNA substrate containing one wild-type site and one mutant site to yield a distribution of topoisomers whose linking numbers differ by steps of one, indicating that Cre can act as a type I topoisomerase.

Base Sequence↗
PubMed1986

The integrase family of site-specific recombinases: regional similarities and global diversity.

A combination of two methods for detecting distant relationships in protein primary sequences was used to compare the site-specific recombination proteins encoded by bacteriophage lambda, phi 80, P22, P2, 186, P4 and P1. This group of proteins exhibits an unexpectedly large diversity of sequences. Despite this diversity, all of the recombinases can be aligned in their C-terminal halves. A 40-residue region near the C terminus is particularly well conserved in all the proteins and is homologous to a region near the C terminus of the yeast 2 mu plasmid Flp protein. This family of recombinases does not appear to be related to any other site-specific recombinases. Three positions are perfectly conserved within this family: histidine, arginine and tyrosine are found at respective alignment positions 396, 399 and 433 within the well-conserved C-terminal region. We speculate that these residues contribute to the active site of this family of recombinases, and suggest that tyrosine-433 forms a transient covalent linkage to DNA during strand cleavage and rejoining.

Amino Acid Sequence↗
PubMed1985

Mechanism of strand cleavage and exchange in the Cre-lox site-specific recombination system.

The bacteriophage P1 recombinase Cre mediates site-specific recombination between loxP sites. The loxP site consists of two 13 base-pair inverted repeats separated by an eight base-pair spacer region. When DNA containing the loxP site is incubated with Cre, specific cleavages occur within the spacer region, creating a six base-pair staggered cut. The cuts are centered on the axis of dyad symmetry of the loxP site, resulting in a 5' protruding terminus: 5' A decreases T-G-T-A-T-G C 3' T A-C-A-T-A-C increases G. At the point of cleavage, Cre becomes covalently attached to a 3' PO4, and produces a free 5' OH. A series of experiments were carried out in which a radioactively labeled loxP site is recombined with an unlabeled loxP site to locate the point at which strand exchange takes place during recombination. The points of strand exchange coincide with the sites at which Cre cleavage of the DNA backbone had been detected.

Bacteriophages↗
PubMed1984

Interaction of the bacteriophage P1 recombinase Cre with the recombining site loxP.

The interaction between the P1 recombinase protein Cre and the DNA site at which it acts, loxP, has been studied by using nuclease protection techniques. The region of DNA protected by Cre against nuclease attack by DNase I or neocarzinostatin is a 34-base-pair (bp) region containing two 13-bp inverted repeats separated by an 8-bp spacer region. These protected sequences have previously been shown to be required for efficient Cre-mediated recombination at loxP. The results of the above protection experiments suggest (i) that no more than 34 bp may be required for loxP recombination and (ii) that the asymmetry of loxP recombination is due to the 8-bp spacer sequence. With neocarzinostatin, a specific nucleotide within the 8-bp spacer region is not protected. This nucleotide is located in a 2-bp sequence shown to be involved in a loxP crossover event, suggesting that this region remains exposed after Cre binding. Protection experiments have also been done with loxP sites that have either the left or right inverted repeat deleted. The nuclease protection pattern of these sites reveals that each loxP site consists of two binding domains for Cre, each being composed of one 13-bp inverted repeat and the contiguous 4 bp of the 8-bp spacer region.

Base Sequence↗
PubMed1982

P1 site-specific recombination: nucleotide sequence of the recombining sites.

Site-specific recombination between molecules of bacteriophage P1 DNA occurs at sites called loxP and requires the action of a protein that is the product of the P1 cre gene. Although recombination between two loxP sites is very efficient, recombination between loxP and a unique site in the bacterial chromosome (loxB) is inefficient and generates two hybrid lox sites called loxR and loxL. We present here the nucleotide sequences of all four lox sites. Analysis of these sequences indicates that (i) a region of extensive homology is not present at the loxP X loxB crossover point, in contrast to the 15-base pair common-core sequence in the bacteriophage lambda att sites, and (ii) the sites contain a region of dyad symmetry with 8- to 13-base pair inverted repeats separated by an 8- to 9-base pair sequence. The loxP X loxB crossover point falls in the sequence that separates the inverted repeats, and deletions that remove either the left or the right inverted repeat of loxP inactivate the site. These two observations are consistent with the conclusion that the region of dyad symmetry is important in los recombination. We have shown further that the loxP X loxP crossover point occurs in a 63-base pair sequence containing the loxP X loxB crossover point, suggesting that, despite the great difference in efficiencies of the two reactions, the crossover points may occur at the same place in both. Explanations for the different recombination properties of the various lox sites are discussed.

Base Sequence↗
PubMed1980

Site-specific recombination functions of bacteriophage lambda: DNA sequence of regulatory regions and overlapping structural genes for Int and Xis.

Site-specific recombination in bacteriophage lambda is mediated by two phage-encoded proteins, Int and Xis. The structural genes encoding these proteins are located immediately to the right of their site of action, the phage att site. The DNA sequence for both the structural and regulatory regions of these genes has been determined. The location and reading frame of the xis gene were ascertained by sequence comparisons with the b538 deletion (that ends within xis) and with the xis6 amber mutation. From the DNA sequence Xis has a molecular weight of 8630; it is rich in basic amino acids with lysine and arginine comprising 25% of the 72 amino acids. Identification of the int reading frame was also unambiguous. From the DNA sequence, Int has a molecular weight of 40,330; of the 356 amino acids, 69 are basic and 46 are acidic. In the NH(2)-terminal portion of Int, 35% of the first 20 amino acids are basic. The site-specific recombination functions form a very tight cluster (att-int-xis) on the lambda chromosome. The combined protein-encoding sequences of xis and int start 1347 base pairs, and terminate 84 base pairs, from the center of the phage att site. The two genes overlap one another by 20 base pairs (xis is upstream of int) and a possible means of controlling the relative synthesis rates of Int and Xis at the level of translation is proposed. Control at the level of transcription is also considered. The mutation intc226 leads to constitutive production of Int, independent of cII/cIII activator proteins normally required for transcription from the p(I) promoter. It is shown that this mutation is the result of a single base change (in the fMet codon of the xis gene) that generates an improved promoter heptamer sequence. This result, in conjunction with comparisons with other promoter sequences and other sequences responding to cII/cIII action, leads to a tentative identification of the p(I) promoter and site of cII/cIII action.

Bacteriophage lambda↗
PubMed1979

Survival and DNA repair in ultraviolet-irradiated haploid and diploid cultured frog cells.

Survival and repair of DNA following ultraviolet (254-nm) radiation have been investigated in ICR 2A, a cultured cell line from haploid embryos of the grassfrog, Rana pipiens. Survival curves from cells recovering in the dark gave mean lethal dose value (Do) in the range 1.5--1.7 Jm-2 for both haploid and diploid cell stocks. The only significant difference observed between haploids and diploids was in the extent of the shoulder at low fluence (Dq), the value for exponentially multiplying diploid cells (3.0 Jm-2) being higher than that found for haploids (1.2 Jm-2). Irradiation of cultures reversibly blocked in the G1 phase of the cell cycle gave survival-curve coefficients indistinguishable between haploids and diploids. Post-irradiation exposure to visible light restored colony-forming capacity and removed chromatographically estimated pyrimidine dimers from DNA at the same rates. After fluences killing 90% of the cells, complete restoration of survival was obtained after 60-min exposure to 500 foot-candles, indicating that in this range lethality is entirely photoreversible and therefore attributable to pyrimidine dimers in DNA. Dimer removal required illumination following ultraviolet exposure, intact cells and physiological temperature, implying that the photoreversal involved DNA photolyase activity. Excision-repair capacity was slight, since no loss of dimers could be detected chromatographically during up to 48 h incubation in the dark and since autoradiographically detected "unscheduled DNA synthesis" was limited to a 2-fold increase saturated at 10 Jm-2. These properties make ICR 2A frog cells useful to explore how DNA-repair pathways influence mutant yield.

Animals↗
PubMed1978

Structure of the lambda att sites generated by int-dependent deletions.

Bacteriophage lambda integrates into the chromosome of its Escherichia coli host by means of a site-specific recombination between a locus on the phage chromosome (phage att site) and a locus on the bacterial chromosome (bacterial att site). The nucleotide sequence of four lambda att sites altered in site-specific recombination has been determined. The int-dependent deletions that generated these att sites have one end point within the phage att site and extend either to the left or to the right. As a result of the new internucleotide bond created by deletion formation, these phage have alterations in the 15-base-pair common core region. The new DNA sequences brought to the att sites by the deletions, designated delta for regions to the left and delta' for regions to the right, do not share any discernible homology with their analogous counterparts in the phage att site arms, P and P', respectively, or with the bacterial att site arms, B and B', respectively. The finding of alterations in the 15-base-pair common core region necessitates a reinterpretation of the genetic properties of these att sites in site-specific recombination. The structure of these sites in relation to their genetic properties can be viewed as being consistent with a model in which the only specificity elements in int-dependent site-specific recombination are the common core region, O, and the phage arms, P and P'.

Base Sequence↗
PubMed1975

Isolation and characterization of mutator strains of Escherichia coli K-12.

A selection procedure was devised to select for mutants of Escherichia coli K-12 with enhanced rates of spontaneous frameshift mutation. Three types of mutants were isolated. Two of the mutations apparently represent alleles of previously isolated mutL13 and mutS3. The third type of mutation, represented by two alleles, lies between lysA and thyA, and has been designated mutR. mutR increases the rate of spontaneous frameshift mutation and also the rate of base substitution mutations. The mutator phenotype is recessive. Reversion of a lac amber mutation located on an episome is increased in the presence of the mutator, indicating that mutR can act in trans. No change in sensitivity to ultraviolet irradiation or mitomycin C could be found when mutR34 was compared to the isogenic mutR+ strain. The mutator's activity was little affected by the type of medium in which the strain was grown. Deoxyribonucleoside triphosphate pools were normal in mutR34. Intergenic recombination frequencies were the same in mutR and mutR and mutR+ strains, but a two- to threefold increase in intragenic recombination was observed in Hfr times Fminus crosses when the recipeint was mutR34 as compared with mutR+. This increase appeared independent of the distance between the two markers within the gene in which the crossover took place.

Alleles↗
PubMed1975

Further characterization of a non-essential mutator gene in Escherichia coli K-12.

The properties of mutR, a mutator closely linked to thyA, have been further characterized. We have found that the mutator gene is carried on a specialized transducing phage (lambdapcI857 thyA) generated by the excision of lambdacI857 integrated at a secondary attachment site between lysA and thyA. We present three lines of evidence indicating that mutR is a nonessential gene. (i) Deletions of the mutator can be found amoung survivors of heat induction of lambdacI857 when the phage is integrated between lysA and thyA. (ii) Mutations in mutR can be induced with the frameshift mutagen ICR-191. (iii) An amber mutant in mutR has been found. Viable strains could be made by combining the mutator with polB, polA polR, ligts7, and uvrA mutations. The mutator was still able to increase the spontaneous mutation frequency in these genetic backgrounds. When the reversion patterns of a series of well-characterized trpA mutations were analyzed, the results suggested that mutR is more efficient at causing transitions than transversion mutations.

Base Sequence↗
PubMedDate not supplied

Cloning of mutH and identification of the gene product.

A specialized lambda transducing phage carrying the mutH gene and several deletion derivatives of this phage were characterized by restriction enzyme analysis. This analysis localized the mutH gene to a small region of bacterial DNA on the transducing phage and facilitated the subsequent cloning of this gene into the multicopy plasmid pBR322. The mutH gene is contained entirely on a 1.5-kb HindIII fragment as judged by the ability of plasmids carrying this fragment to complement mutH- alleles on the bacterial chromosome. Using recombinant plasmids containing the 1.5-kb HindIII fragment, we identified an Mr 25000 protein as the product of the mutH gene in an in vitro transcription-translation system as well as in maxicells. Various deletion derivatives of the mutH-containing plasmids that exhibit a Mut- phenotype also have lost the Mr 25000 protein.

Bacterial Proteins↗