Biomedical subjects

R Gurny

Publications and source records attributed to R Gurny.

At least 19 recordsLinked to original sources

PubMed2001

Therapeutic applications of viscous and injectable poly(ortho esters).

Poly(ortho esters) (POE) are hydrophobic and bioerodible polymers that have been investigated for pharmaceutical use since the early 1970s. Among the four described generations of POE, the third (POE III) and fourth (POE IV) are promising viscous and injectable materials which have been investigated in numerous biomedical applications. POE III has been extensively studied for ophthalmic drug delivery, it presents an excellent biocompatibility and is currently being investigated as a vehicle for sustained drug delivery to treat diseases of the posterior segment of the eye. POE IV is distinguishable by a highly reproducible and controlled synthesis, a higher hydrophobicity, and an excellent biocompatibility. It is currently under development for a variety of applications, such as ocular delivery, periodontal disease treatment and applications in veterinary medicine. This review will also focus on new perspectives for this promising family of polymers, such as guided tissue regeneration, treatment of osteoarthritis, as well as peptide and protein delivery.

Animals↗

PubMed2001

Release of BSA from poly(ortho ester) extruded thin strands.

A solventless procedure was used where powdered polymer and micronized protein were intimately mixed and then extruded into 1 mm strands that were cut to the desired length. The polymers used were poly(ortho esters) specifically designed to allow extrusion in the neighborhood of 70 degrees C. At these temperatures many proteins maintain activity in the dry state. In vitro erosion and BSA release results indicate that after a fairly long lag-time, BSA release and polymer erosion occur concomitantly indicating an erosion-controlled process. The lag-time could be eliminated by the addition to the mixture prior to extrusion between 1 and 5 wt% poly(ethylene glycol) or its methoxy derivatives. The lag-time could also be eliminated by using an AB-block copolymer where A is poly(ortho ester) and B is poly(ethylene glycol).

Crystallization↗

PubMed2001

Comparison of two methods of encapsulation of an oligonucleotide into poly(D,L-lactic acid) particles.

The aim of this study was to compare two methods to encapsulate a 25-mer-phosphorothioate oligonucleotide (ODN) into poly(D,L-lactic acid) (PLA) particles. Antisense oligonucleotides belong to a new therapeutic class especially attractive for the treatment of cancers and viral diseases. The development of these new drugs suffers, however, from poor stability in biological media and very low cellular uptake. Polymeric particulate systems display interesting features for ODN delivery. ODN are highly hydrophilic and most encapsulation methods are inappropriate for such molecules. Using poly(D,L-lactide) polymer, two methods of encapsulation were compared. First, a double emulsion technique was used to prepare nano- and microparticles. Secondly, the ODN was combined with a quaternary ammonium, the cethyltrimethyl-ammonium bromide (CTAB), to enhance the hydrophobicity of the molecule before entrapment by the emulsification-diffusion method. Both methods led to the formation of individualized and spherical particles loaded with a significant amount of ODN. Similar entrapment efficiencies were obtained for the nanoparticles prepared by both methods (approx. 27% of the theoretical loading) whereas 45% of entrapment efficiency was observed for the microparticles. Seventy five percent of the ODN were released in 60 min with the particles prepared by the emulsification-diffusion method, whereas only 7% were released in 60 h when using the double emulsion method. A viability test on U-937 cells showed better survival rates with the particles prepared by the double emulsion technique. The results suggest that the location of the ODN in the polymeric matrix is affected by the encapsulation method. Particles containing CTAB appeared more toxic than the ones obtained by the double emulsion technique, however, these particles can still be used for antisense activity since high oligonucleotide loading can be achieved.

Diffusion↗

PubMed2001

Tamoxifen encapsulation within polyethylene glycol-coated nanospheres. A new antiestrogen formulation.

When dealing with solid tumors in vivo, pegylated long-circulating carrier systems show, after intravenous administration, an attractive extravasation profile with an enhanced localization in the tumoral interstitium. These systems could be of help for the delivery of cancer fighting drugs, such as Tamoxifen, a well known antiestrogen used in breast cancer therapy that possesses an extended biodistribution in vivo. This work aimed at encapsulating Tamoxifen in long-circulating poly(MePEGcyanoacrylate-co-hexadecylcyanoacrylate) 1:4 nanospheres. Tamoxifen-loaded poly(MePEGcyanoacrylate-co-hexadecylcyanoacrylate) nanospheres were successfully synthesized and characterized in terms of hydrophilicity/hydrophobicity by a model made up from near infrared spectra using principal component analysis. Zeta potential, drug loading, encapsulation efficiency, as well as biological effect, in vitro release and nanospheres integrity were also investigated. Even though near infrared spectroscopy could not detect Tamoxifen, it revealed that Pluronic F68 was associated with the pegylated nanospheres. HPLC measurements demonstrated that Tamoxifen was encapsulated in the pegylated nanospheres following a partition equilibrium between the polymeric and the aqueous phases. The Tamoxifen encapsulated in the nanospheres still showed a transcription inhibitory activity in ex vivo experiments. However, zeta potential and in vitro release suggested that Tamoxifen was essentially localized at the nanoparticles surface, resulting in an important and immediate drug release.

Drug Delivery Systems↗

PubMed2001

Optimization of a novel bioerodible device based on auto-catalyzed poly(ortho esters) for controlled delivery of tetracycline to periodontal pocket.

Local delivery of antimicrobial agents in inflamed periodontal pocket has been shown to be effective in reducing periodontopathic microorganisms. This research focuses on developing and characterizing bioerodible formulations based on auto-catalyzed poly(ortho esters) (POExLAy) for modulated release of tetracycline over 2 weeks. POExLAy are a new versatile family of POE-containing lactoyl lactyl dimers in the polymer backbone. By modifying the proportion of lactic acid in the polymer, viscous or solid materials having different degradation rate can be produced. The formulations can be either injected or placed as a solid device directly into the periodontal pocket. Tetracycline-free base incorporated into these materials was released within 10-14 days depending on polymer structure. Increase in lactic acid content in the polymer tended to increase the drug release rate and to reduce the initial lag time. Tetracycline release from such bioerodible delivery system occurs predominantly by surface erosion of the polymeric matrix, leading to kinetics which can be zero order. This periodontal drug delivery system is designed to be used as an adjunct in the treatment of periodontal diseases. Clinical studies are currently in progress.

Biocompatible Materials↗

PubMed2001

Inhibition of HIV-1 in cell culture by oligonucleotide-loaded nanoparticles.

PURPOSE: To investigate the potential use of polymeric nanoparticles for the delivery of antisense oligonucleotides in HIV-1-infected cell cultures. METHODS: Phosphorothioate oligonucleotides were encapsulated into poly (D,L-lactic acid) nanoparticles. Two models of infected cells were used to test the ability of nanoparticles to deliver them. HeLa P4-2 CD4+ cells, stably transfected with the beta-galactosidase reporter gene, were first used to evaluate the activity of the oligonucleotides on a single-round infection cycle. The acutely infected lymphoid CEM cells were then used to evaluate the inhibition of the viral production of HIV-1 by the oligonucleotides. RESULTS: The addition to infected CEM cells of nanoparticles containing gag antisense oligonucleotides in the nanomolar range led to strong inhibition of the viral production in a concentration-dependent manner. Similar results were previously observed in HeLa P4-2 CD4+ cells. Nanoparticle-entrapped random-order gag oligonucleotides had similar effects on reverse transcription. However, the reverse transcriptase activity of infected cells treated with nanomolar concentrations of free antisense and random oligonucleotides was not affected. CONCLUSIONS: These results suggest that poly (D,L-lactic acid) nanoparticles may have great potential as an efficient delivery system for oligonucleotides in HIV natural target cells, i.e., lymphocytic cells.

Cell Survival↗

PubMed2001

pH-Dependent dissolving nano- and microparticles for improved peroral delivery of a highly lipophilic compound in dogs.

RR01, a new highly lipophilic drug showing extremely low water solubility and poor oral bioavailability, has been incorporated into pH-dependent dissolving particles made of a poly(methacrylic acid-co-ethylacrylate) copolymer. The physicochemical properties of the particles were determined using laser-light-scattering techniques, scanning electron microscopy, high-performance liquid chromatography, and x-ray powder diffraction. Suspension of the free drug in a solution of hydroxypropylcellulose (reference formulation) and aqueous dispersions of pH-sensitive RR01-loaded nanoparticles or microparticles were administered orally to Beagle dogs according to a 2-block Latin square design (n = 6). Plasma samples were obtained over the course of 48 hours and analyzed by gas chromatography/mass spectrometry. The administration of the reference formulation resulted in a particularly high interindividual variability of pharmacokinetic parameters, with low exposure to compound RR01 (AUC0-48h of 6.5 microg x h/mL and coefficient of variation (CV) of 116%) and much higher Tmax, as compared to both pH-sensitive formulations. With respect to exposure and interindividual variability, nanoparticles were superior to microparticles (AUC0-48h of 27.1 microg x h/mL versus 17.7 microg x h/mL with CV of 19% and 40%, respectively), indicating that the particle size may play an important role in the absorption of compound RR01. The performance of pH-sensitive particles is attributed to their ability to release the drug selectively in the upper part of the intestine in a molecular or amorphous form. In conclusion, pH-dependent dissolving particles have a great potential as oral delivery systems for drugs with low water solubility and acceptable permeation properties.

Acrylic Resins↗

PubMed2001

Fluorescence correlation spectroscopy for the characterisation of drug delivery systems.

Fluorescence Correlation Spectroscopy (FCS) offers the possibility to measure molecular interactions between active compounds and drug delivery systems such as cationic peptides or polymeric nanoparticles. In order to investigate the potential of FCS for drug carrier design, a complex made of protamine, a cationic peptide, and a 19mer oligonucleotide was characterised. Protamine was used to form proticles, agglomerates consisting of the oligonucleotide and the cationic peptide. The binding kinetics and proticle formation was studied by FCS. Complete binding of the oligonucleotide to protamine was achieved at a 1:2.5 (w/w) ratio. From the diffusion coefficient, D, a mean value for the hydrodynamic diameter was calculated at 53 nm, which was in agreement with data obtained from photon correlation spectroscopy (PCS). Oligonucleotide loading into cationic monomethylaminoethylmethacrylate (MMAEMA) nanoparticles was also determined by this method at 5.6% (5.6 microg per 100 microg of nanoparticles).

Drug Carriers↗

PubMed2001

A new poly(ortho ester)-based drug delivery system as an adjunct treatment in filtering surgery.

PURPOSE: Pharmacologic modulation of wound healing after glaucoma filtering surgery remains a major clinical challenge in ophthalmology. Poly(ortho ester) (POE) is a bioerodible and biocompatible viscous polymer potentially useful as a sustained drug delivery system that allows the frequency of intraocular injections to be reduced. The purpose of this study was to determine the efficacy of POE containing a precise amount of 5-fluorouracil (5-FU) in an experimental model of filtering surgery in the rabbit. METHODS: Trabeculectomy was performed in pigmented rabbit eyes. An ointmentlike formulation of POE containing 1% wt/wt 5-FU was injected subconjunctivally at the site of surgery, during the procedure. Intraocular pressure (IOP), bleb persistence, and ocular inflammatory reaction were monitored until postoperative day 30. Quantitative analysis of 5-FU was performed in the anterior chamber. Histologic analysis was used to assess the appearance of the filtering fistula and the polymer's biocompatibility. RESULTS: The decrease in IOP from baseline and the persistence of the filtering bleb were significantly more marked in the 5-FU-treated eyes during postoperative days 9 through 28. Corneal toxicity triggered by 5-FU was significantly lower in the group that received 5-FU in POE compared with a 5-FU tamponade. Histopathologic evaluation showed that POE was well tolerated, and no fibrosis occurred in eyes treated with POE containing 5-FU. CONCLUSIONS: In this rabbit model of trabeculectomy, the formulation based on POE and containing a precise amount of 5-FU reduced IOP and prolonged bleb persistence in a way similar to the conventional method of a 5-FU tamponade, while significantly reducing 5-FU toxicity.

Animals↗

PubMed2001

[A comparative study of the ocular tolerance of 3 timolol-based preparations: the influence of preservatives on ocular tolerance].

PURPOSE: Ophthalmic preparations can cause toxic ocular reactions, often associated with the use of preservatives. The aim of this study was to compare the ocular tolerance of three ophthalmic preparations based on timolol: a preservative free ophthalmic preparation (Timabak) and two other commercially available preserved preparations (Timoptol) and Timoptol LP). METHODS: The effect of repeatedly instilling eye drops for 28 days on rabbit eyes was assessed in vivo by mean of a confocal laser scanning ophthalmoscope. The corneal microlesions were selectively marked by fluorescein. RESULTS AND CONCLUSION: The overall results show the good ocular tolerance of the three tested products. However, a closer comparison between the products brought out differences in the extent of lesions among the tested products depending on their composition. Indeed the preservative free eye drops appeared better tolerated than the two preserved preparations.

Adrenergic beta-Antagonists↗

PubMed2000

Application of in vivo confocal microscopy to the objective evaluation of ocular irritation induced by surfactants.

An ocular irritation test using confocal laser scanning ophthalmoscopy has been developed in which corneal lesions subsequent to instillation of surfactants are specifically marked by fluorescein and assessed by digital image processing. The sum of the observed fluorescent corneal areas is taken into account as an endpoint of ocular irritation. Eight currently used nonionic, cationic and anionic surfactants were applied onto the cornea of rabbits and mice, four times per day during 3 days at various concentrations. Benzalkonium chloride, a cationic surfactant, at a concentration range of 0.01-0.5%, was tested in the same manner. The cornea was evaluated in vivo for ocular tolerance by confocal microscopy. In both rabbits and mice, the test revealed following irritation rankings: cationic>anionic>nonionic surfactants. Furthermore, in both animal models, the ocular damage increased with the concentration of benzalkonium. The test was sensitive enough to detect ocular microlesions at concentrations of surfactants as low as 0.01% for benzalkonium. These findings demonstrate the usefulness of confocal microscopy for the non-invasive, in situ evaluation of ocular tolerance.

Animals↗

PubMed2000

Oral bioavailability of a poorly water soluble HIV-1 protease inhibitor incorporated into pH-sensitive particles: effect of the particle size and nutritional state.

The new chemical entity CGP 70726, a very poorly water-soluble HIV-1 protease inhibitor, was incorporated into pH-sensitive nanoparticles and microparticles made of the poly(methacrylic acid-co-ethylacrylate) copolymer Eudragit((R)) L100-55. The particles were characterized in terms of morphology, size distribution, drug loading, production yield and dispersion state of the drug inside the polymeric matrices. Aqueous dispersions of the particles were administered orally to Beagle dogs against a suspension of free drug (control formulation) all at a dose of 100 mg/kg. Oral administration was conducted in the absence and presence of food. Plasma concentrations and pharmacokinetic parameters were determined within 8 h post-dose. While no measurable absorption of the drug resulted after administration of the control formulation, substantial systemic exposure to the compound was obtained with both kinds of pH-sensitive formulations. The selective release of CGP 70726 in a highly dispersed/amorphous state and creation of high concentrations close to its absorption site was thought to account for this positive result. The largest areas under the plasma concentration-time curve (AUC) were obtained in the fasted state, with slightly better performance of the microparticles over the nanoparticles, in both nutritional states (7.8+/-1.5 versus 5.8+/-0. 8 micromol.h/l in the fasted state; 4.4+/-1.4 versus 2.00+/-0.5 micromol.h/l in the fed state). With these results, the potential of pH-sensitive particles for the oral delivery of HIV-1 protease inhibitors with low water solubility was confirmed.

Administration, Oral↗

PubMed2000

A viscous bioerodible poly(ortho ester) as a new biomaterial for intraocular application.

The biocompatibility of a viscous, hydrophobic, bioerodible poly(ortho ester) (POE) intended for intraocular application was investigated. POE was evaluated as a blank carrier and as containing modulators of degradation. Each formulation was injected intracamerally and intravitreally in rabbit eyes, and clinical and histological examinations were performed postoperatively for 2 weeks. In the case of intracameral injections, polymer biocompatibility appeared to depend on the amount injected in the anterior chamber. When 50 microL was administered, the polymer degraded within 2 weeks, and clinical observations showed good biocompatibility of POE with no toxicity to the ocular tissues or increase in intraocular pressure. The injection of a larger volume, 100 microL, of POE, appeared inappropriate because of direct contact of polymeric material with the corneal endothelium, and triggered reversible edema and inflammation in the anterior chamber of the eye that regressed after a few days. After intravitreal administration, POE was well tolerated and no inflammatory reaction developed during the observation period. The polymer degraded slowly, appearing as a round whitish bubble in the vitreous cavity. The presence of modulators of degradation both improved POE biocompatibility and prolonged polymer lifetime in the eye. POE appears to be a promising biomaterial for clinical intraocular application.

Animals↗

PubMed2000

Improved biocompatibility of a viscous bioerodible poly(ortho ester) by controlling the environmental pH during degradation.

The poly(ortho ester), POE, used in this investigation, is a viscous bioerodible polymer (8 kDa), which rapidly degrades into a triol and an acidic by-product, acetic acid. In order to improve biocompatibility, we have evaluated the addition of various basic excipients, such as sodium acetate, hydroxyapatite, calcium carbonate and magnesium hydroxide, which buffered and neutralized the acidic degradation product and prolonged the polymer lifetime and drug release. This decrease of POE degradation rate results in a decreased rate of formation of the acidic by-product. Similarly, a POE of higher molecular weight (14 kDa) has been tested. Sodium acetate was too hydrophilic to affect the drug release and the biocompatibility of the polymer, whereas the presence of magnesium hydroxide markedly prolonged the drug release and improved the acceptability of the polymer. The increased molecular weight POE did not improve biocompatibility and a similar but delayed, inflammatory reaction was observed.

Animals↗

PubMed2000

Formation of peptide impurities in polyester matrices during implant manufacturing.

Most peptides are susceptible, in vivo, to proteolytic degradation, and it is difficult to formulate and to deliver them without loss of biological activity. In addition, it is often desirable to release them continuously and at a controlled rate over a period of weeks or months. For these reasons, a controlled release system is suitable. Poly(lactic acid) (PLA) is a biocompatible and biodegradable material that can be used for many applications, including the design of injectable controlled release systems for pharmaceutical agents. Development of these delivery systems presents challenges in the assessment of stability, specially for peptide drugs. By means of an extrusion method, long-acting poly(lactic acid) implants containing vapreotide, a somatostatin analogue, were prepared. The nature of the main degradation product obtained after implant manufacturing was elucidated. It was found that the main peptide impurity was a lactoyl lactyl-vapreotide conjugate. Because lactide are found in small quantities in most commercially available PLA, the influence of residual lactide in the polymeric matrix, on the formation of peptide impurities during manufacturing, was specially investigated. This work demonstrates that the degree of purity of the carrier is of great importance with regard to the formation of peptide impurities.

Analgesics↗

PubMed2000

Poly(ortho esters) - their development and some recent applications.

Poly(ortho esters) have been under development since the early 1970s and four families of such polymers have been described. Of most interest are poly(ortho ester) III and poly(ortho ester) IV. Poly(ortho ester) III is a semisolid material that has been shown to be highly biocompatible and is currently being investigated as an adjunct to glaucoma filtering surgery and other ocular applications. However, the polymerization is difficult to control and is not readily scaled up. Poly(ortho ester) IV can be easily prepared in a highly reproducible manner, is very stable provided moisture is rigorously excluded and has also been shown to be highly biocompatible. It is currently under development for a variety of applications, such as ocular delivery, protein release, post-operative pain treatment and post-operative cancer treatment.

Animals↗

PubMed2000

Local delivery of antimicrobial agents for the treatment of periodontal diseases.

Periodontitis is an inflammatory disease of the supporting tissues of the teeth caused by groups of specific microorganisms. Aggressive forms of periodontitis can be localized or generalized. The concept that localized problem sites may be treated by local drug delivery appears attractive as the antimicrobial agent is delivered within periodontal pockets and the therapy is targeted on specific pathogenic microorganisms. Local delivery of antimicrobial agents using controlled release systems should be considered as adjunctive to mechanical debridement for the treatment of localized forms of periodontal destruction. This article reviews various types of delivery systems evaluated in practical periodontal therapy. Despite the large number of studies showing an enhanced effectiveness of local antibiotherapy, there are insufficient comparative data to support any of the local delivery system.

Animals↗

PubMed2000

Editorial

Explore the source record for details and available documents.

Journal Article↗