Search PubMed⌕ Search

Biomedical subjects

R Gori

Publications and source records attributed to R Gori.

At least 19 recordsLinked to original sources
PubMed2005

Membrane bio-reactor for textile wastewater treatment plant upgrading.

Textile industries carry out several fiber treatments using variable quantities of water, from five to forty times the fiber weight, and consequently generate large volumes of wastewater to be disposed of. Membrane Bio-reactors (MBRs) combine membrane technology with biological reactors for the treatment of wastewater: micro or ultrafiltration membranes are used for solid-liquid separation replacing the secondary settling of the traditional activated sludge system. This paper deals with the possibility of realizing a new section of one existing WWTP (activated sludge + clariflocculation + ozonation) for the treatment of treating textile wastewater to be recycled, equipped with an MBR (76 l/s as design capacity) and running in parallel with the existing one. During a 4-month experimental period, a pilot-scale MBR proved to be very effective for wastewater reclamation. On average, removal efficiency of the pilot plant (93% for COD, and over 99% for total suspended solids) was higher than the WWTP ones. Color was removed as in the WWTP. Anionic surfactants removal of pilot plant was lower than that of the WWTP (90.5 and 93.2% respectively), while the BiAS removal was higher in the pilot plant (98.2 vs. 97.1). At the end cost analysis of the proposed upgrade is reported.

Bioreactors↗
PubMed2004

Reclaimed municipal wastewater as source of water and nutrients for plant nurseries.

A three year experimental activity was carried out to evaluate the possibility of reusing Reclaimed Wastewater (RWW) in Pistoia's nursery area (Central Italy). The research was aimed at: 1. identifying the best tertiary treatment facilities in order to make the effluent in compliance with the current Italian legislation for RWW reuse, 2. evaluating the effects of RWW irrigation on some ornamental, 3. quantifying fertilizing value and environmental impacts of RWW irrigation. In this paper the results of the last year experimental activity are presented. Experimental results indicated that filtration and disinfection with peracetic acid plus UV were very effective in indicator bacteria removal; as a matter of fact, neither Escherichia coli nor Total Coliforms were detected in any samples of pilot plant effluent. Results of an agronomical experiment indicated the suitability of the tertiary effluent for the irrigation: at the end of the growing season a higher (or equal) total dry mass was detected in RWW irrigated plants than well-water (WW) irrigated ones. Finally, the tertiary effluent can be considered as an important source of fertilizer for container-grown plants. As a matter of fact RWW irrigation showed to be able to replace at least one of the traditional fertilization treatments.

Agriculture↗
PubMed2004

Membrane bio-reactor for advanced textile wastewater treatment and reuse.

Textile wastewater contains slowly- or non-biodegradable organic substances whose removal or transformation calls for advanced tertiary treatments downstream Activated Sludge Treatment Plants (ASTP). This work is focused on the treatment of textile industry wastewater using Membrane Bio-reactor (MBR) technology. An experimental activity was carried out at the Baciacavallo Wastewater Treatment Plant (WWTP) (Prato, Italy) to verify the efficiency of a pilot-scale MBR for the treatment of municipal wastewater, in which textile industry wastewater predominates. In the Baciacavallo WWTP the biological section is followed by a coagulation-flocculation treatment and ozonation. During the 5 months experimental period, the pilot-scale MBR proved to be very effective for wastewater reclamation. On average, removal efficiency of the pilot plant (93% for COD, 96% for ammonium and 99% for total suspended solids) was higher than the WWTP ones. Color was removed as in the WWTP. Anionic surf actants removal of pilot plant and WWTP were very similar (92.5 and 93.3% respectively), while the non-ionic surfactants removal was higher in the pilot plant (99.2 vs. 97.1). In conclusion the MBR technology demonstrated to be effective for textile wastewater reclamation, leading both to an improvement of pollutants removal and to a draw-plate simplification.

Bioreactors↗
PubMed2001

HIDE: a new hybrid environment for the design of custom-made hip prosthesis.

This technical note describes a new software environment (HIPCOM design environment, HIDE) for the design of custom-made total hip replacements. These devices are frequently designed using general-purpose mechanical computer-aided design (CAD) programs using a set of bone contours extracted from the computer tomography (CT) images as anatomical reference. On the contrary, the HIDE system was developed to let the operator directly design the stem shape onto the CT images in a single-step operation. The operator can directly import CT data in DICOM format or use special functions to reconvert to a digital stack, the CT images printed on a radiological film. Once the stack of CT images is loaded, the operator can design the implant shape by imposing control sections directly on the CT images. The interpolation of these control sections produces the basic 3D shape of the custom-made stem. The shape is then exported to the CAD-computer-aided manufacturing (CAM) program to refine the design and to generate the part program to manufacture the implant with a CNC tooling machine. Using HIDE, the duration of design steps it affected was reduced by more than 50% with respect to the standard method in use at the manufacturer site. HIDE also improved the accuracy and the repeatability of the whole procedure. The learning curve became flat after only ten cases. These good results were achieved because of the integration of the vectorial description of the prosthetic component with the raster description of the CT data that allowed the designer to use all details available in the CT images.

Computer-Aided Design↗
PubMed1994

Skin contamination and low airborne nickel exposure of electroplaters.

The present study was performed to evaluate the role of hand and facial contamination in the absorption of soluble nickel compounds in 41 male subjects employed in electroplating operations in 25 small factories in the province of Florence (Italy). Personal exposure to airborne nickel ranged from 0.10 to 42 micrograms/m3; the median (range) urine, hands and face nickel levels were 4.2 (0.7-50) micrograms/l, 39 (1.9-547) micrograms, 9.0 (1.0-86) micrograms, respectively. Face nickel values explained the bulk of the variance in urine nickel levels (42%). In stepwise multiple regression analysis all other variables were not significant. The log-linear model can be expressed as: log (urine-Ni) = 0.295 + 0.593 log (face-Ni). Our results suggest that skin contamination, especially facial skin, plays an important role in nickel absorption in exposed workers.

Absorption↗
PubMed1994

[Measuring and speaking about respiration. Role and ethical function of a psychopathological interview in a medical service].

On the occasion of a respiratory function exploration, it was given to the patient the possibility of evoking, in respect of freely association, the psychical sense assumed by his symptom in his history. The unity of time, place and methodology, clinical psychopathology, defined our "experimental device". When the patient of this study, with SAS, said to the physician "I forget myself" with regard to ther apneas, the symptom, spoken, referred to a construction, "complementary" (Bohr, 1927) to another one described and objectivated by medicine. Each interpretation of the somatic phenomenon is related to the occurrence of speaking in the context of discursive associations and transference coordinates. The symptom is related to psychical reality, conflicts and desire of the patient. By the relations established between the advent of the spoken symptom and other events, the patient considers it as a response to a personal question. Then, he can reach a fragment of his verify, hear himself and hear the effects of his speaking. Without this possibility of reappropriating subjectively and intersubjectively the suffering in its irreducible singularity, he would remain alienated from his suffering, as to a trauma. Our approach gives evidence of the methodological as well as praxeological revision of the psychopathology contribution to the medicine.

Ethics, Medical↗
PubMed1993

Plasma retinol and alpha-tocopherol concentrations in insulin-dependent diabetes mellitus: their relationship to microvascular complications.

Plasma alpha-tocopherol and retinol, both assayed by an HPLC method, have been evaluated in a group of 60 patients affected by insulin-dependent (type 1) diabetes mellitus, stratified according to the presence of retinopathy and nephropathy diagnosed by an urinary albumin excretion rate ranging between 20 and 200 micrograms/min (microalbuminaria) or > 200 micrograms/min (macroalbuminuria), all of whom were compared with 26 healthy controls strictly matched for age and sex. Plasma lipids and age were positively correlated with plasma retinol and alpha-tocopherol in both diabetic and control subjects. Either plasma retinol or its ratio to cholesterol were significantly and independently reduced in the younger subset of diabetics, as compared to controls, independently from other confounding variables, while plasma alpha-tocopherol was unchanged in diabetic subjects and in healthy controls. Retinopathy was not associated with altered levels of both plasma alpha-tocopherol or retinol. The presence of increased urinary albumin excretion was associated with higher plasma levels of alpha-tocopherol and, only for macroalbuminuria, of retinol. However, after processing the data by a multivariate model, nephropathy was characterized by an increase only in plasma alpha-tocopherol. In conclusion, according to our findings, plasma retinol is significantly decreased in younger insulin-dependent diabetic patients while alpha-tocopherol is significantly altered in diabetic patients with nephropathy.

Adolescent↗
PubMed1986

Pulmonary alveolar lipoproteinosis in rats following intratracheal injection of pyrite particles.

Wistar rats were injected intratracheally with pyrite particles and after 6 and 12 mo, lungs were evaluated for histological changes. Results were compared with rats that were given particles of galena, lead silicate, travertine, and quartz. Under the light microscope no significant changes were observed in the lungs from animals treated with galena, lead silicate, and travertine. In the lungs from animals that received quartz, a typical nodular fibrosis was observed. Moreover, both pyrite-treated rats and quartz-treated rats developed pulmonary alveolar lipoproteinosis; the lesions were much less prominent and severe in animals injected with pyrite than with quartz. These results indicate that pyrite, like only a few other types of dust that are different from quartz, can evoke the development of pulmonary alveolar lipoproteinosis in rats.

Animals↗
PubMed1985

Lead silicate toxicity: a comparison among different compounds.

The aim of this report is to point out the relative toxicity of different commercial products containing lead silicates by studying their in vitro solubility and rate of absorption via the respiratory and digestive systems, compared with those of red lead (lead tetroxide). In vitro solubility was tested, by a modified Brimsdown method, with bidistilled water, saline, blood serum, pleural fluid, and dilute hydrochloric and acetic acids as solvents. Experimental animals were administered 25 mg equivalent mean doses using an intragastric tube or endotracheal intubation. Results showed that in vitro solubility gradually increases from distilled water, through saline and biological fluids, to acidic media. Lead absorption via the respiratory system is rapid and persistent, with small differences among the tested compounds. Less information can be gained from intragastric experiments. No correlation was found between in vitro solubility and in vivo absorption. On the other hand, in vitro studies must be strictly standardized. The relative absorption of the different materials, compared with red lead showed that all of them have to be regarded as equally toxic.

Absorption↗
PubMed1983

[Interlaboratory quality control for the determination of blood lead. Initial experiences in Tuscany].

Results of an interlaboratory precision comparison programme of blood lead determination are presented. The samples consisted of bovine haemolyzed whole blood to which were added in pool small quantities of lead nitrate aqueous solutions to obtain two different concentrations of the metal (i.e. about 30 and 70 micrograms/dl). After each pool was well mixed it was divided into 15 ml portions in screw-top linear polyethylene vials and stored at -25 degrees C. The analytical methods used by the five public health laboratories participating in the programme were based on atomic absorption spectrophotometry. Three laboratories used methods which incorporate discrete sampling techniques (i.e. tantalum boat, electrothermal atomisation) and the remaining two, a method incorporating a sample preconcentration by solvent extraction and flame atomisation. During the six months period of the programme, fifty five results were obtained for each of the two pools of blood. Common statistical methods and the graphic system devised by Youden were used for data analysis. An acceptable agreement among results from the five laboratories has been obtained. The usefulness of this type of programme in improving analytical proficiency has been confirmed.

Animals↗
PubMedDate not supplied

Development of a software for the design of custom-made hip prostheses using an open-source rapid application development environment.

The present work describes a technology transfer project called HIPCOM devoted to the re-engineering of the process used by a medical devices manufacturer to design custom-made hip prostheses. Although it started with insufficient support from the end-user management, a very tight scheduling and a moderate budget, the project developed into what is considered by all partners a success story. In particular, the development of the design software, called HIPCOM Interactive Design Environment (HIDE) was completed in a time shorter than any optimistic expectation. The software was quite stable since its first beta version, and once introduced at the user site it fully replaced the original procedure in less than two months. One year after the early adoption, more than 80 custom-made prostheses had been designed with HIDE and the user had reported only two bugs, both cosmetics. The scope of the present work was to report the development experience and to investigate the reasons for these positive results, with particular reference to the development procedure and the software architecture. The choice of TCL/TK as development language and the adoption of well-defined software architecture were found to be the success key factors. Other important determinants were found to be the adoption of an incremental software engineering strategy, well suited for small to medium projects and the presence in the development staff of a technology transfer expert.

Computer-Aided Design↗
PubMedDate not supplied

[The space of passion].

The figures and speech of passion are clinically polymorphous and heterogeneous: from the baroque of the mystical ecstasy, the iconophily of religious and political ideologies, the collector's usual fetishism and the paranoiac insanity of hatred to the passions of knowing and loving. These are at the same time a passion for life as well as for self-destruction, for showing oneself as well for not knowing oneself, for representing oneself as well as for non representing oneself. Passion bares the impossible of mourning, its real point that gives a boost to the continual work. Passion confronts us to the essence of the being, to its fundamental distress. The being, whose shadow is projecting itself on the object of the passion, gives a name and a face to that object, and receives back its marks. That explains why passion is always accompanied by suffering. Moreover, passion is suffering according to its etymology: until the XVIth century, the word "passionate" meant somebody who suffered physically. The nature of the object of the passion (a relic, a part of a sentence, an indication, the track of an object or any other subject) changes nothing to the structure of the speech of passion.

Affect↗
PubMedDate not supplied

Respiratory disorders and lung function impairment in pyrite miners.

A research study was carried out at a pyrite mine in Niccioleta, southern Tuscany, during the period 1980-1983 to investigate the possible effects of gaseous and particulate pollutants on the respiratory function of mine workers. The study was undertaken to fill the gap in recent scientific information in this field and also collect data which could be used for future planning of epidemiological and environmental controls at the mine. For the most exposed underground workers a dust exposure of 1.04 mg/m3 of inhalable dust and 0.60 mg/m3 of respirable dust was found. The average quartz content was less than 1.5% in both types of dust. Median exposures of the most exposed risk group were 6.0 ppm for carbon monoxide (CO), 0.22 ppm for nitrogen dioxide (NO2), 0.09 ppm for sulfur dioxide (SO2). The health effects of gaseous and particulate pollutants were studied by comparing the respiratory symptoms and lung function data of the miners with those of a reference group. A significantly increased prevalence of simple chronic bronchitis was found among underground miners when compared to the reference group. This condition was not associated with functional impairment of obstructive nature. Chest x-rays revealed 14 cases of p type pneumoconiosis.

Adult↗