Biomedical subjects

R Giardino

Publications and source records attributed to R Giardino.

At least 55 records · Page 3Linked to original sources

PubMed2004

Poly(2-hydroxyethyl methacrylate) biomimetic coating to improve osseointegration of a PMMA/HA/glass composite implant: in vivo mechanical and histomorphometric assessments.

Bone implants must simultaneously satisfy many requirements, even though the surface properties remain a crucial aspect in osseointegration success. Since a single material with a uniform structure cannot satisfy all of these requirements, composite materials specifically designed for orthopedic or dental implant application should be envisaged. Two poly(methylmethacrylate)/hydroxyapatite composites reinforced by E-glass fibres, uncoated (PMMA/HA/Glass) and poly(2-hydroxyethyl methacrylate) (PMMA/HA/Glass+pHEMA) coated by the biomimetic method, were mechanically (push-out test) and histomorphometrically (Affinity Index, AI) investigated in an in vivo rabbit model. Cylindrical implants (diameter 2 mm x 5 mm length) were inserted into rabbit femoral cortical (mid-diaphysis) and cancellous (distal epiphysis) bone, under general anesthesia. The highest values of push-out force and ultimate shear strength were observed for the PMMA/HA/Glass at 12 weeks, which significantly (p < 0.001) differed from those of PMMA/HA/Glass+pHEMA at the same experimental time and from those of PMMA/HA/Glass at 4 weeks. At both experimental times, significantly (p < 0.0005) lower values of AI were observed in the PMMA/HA/Glass+pHEMA versus PMMA/HA/Glass (distal femoral epiphysis: 4 weeks = 33%; 12 weeks = 19%; femoral diaphysis: 4 weeks = 15%; 12 weeks = 11%). The good mechanical and histomorphometric results obtained with PMMA/HA/Glass should be followed by further evaluation of bone remodeling processes and mechanical strength around loaded PMMA/HA/Glass implants at longer experimental times. Finally, the biomimetic method applied to pHEMA needs to be further investigated in order to improve the positive effect of SBF on pHEMA and to enhance the coating adhesion.

Animals↗

PubMed2004

Current trends in the enhancement of biomaterial osteointegration: biophysical stimulation.

To enhance bone implant osteointegration, many strategies for improving biomaterial properties have been developed which include optimization of implant material, implant design, surface morphology and osteogenetic coatings. Other methods that have been attempted to enhance endogenous bone healing around biomaterials are different forms of biophysical stimulations such as pulsed electromagnetic fields (PEMFs) and low intensity pulsed ultrasounds (LIPUS), which were initially developed to accelerate fracture healing. To aid in the use of adjuvant biophysical therapies in the management of bone-implant osteointegration, the present authors reviewed experimental and clinical studies published in the literature over the last 20 years on the combined use of biomaterials and PEMFs or LIPUS, and summarized the methodology, and the possible mechanism of action and effectiveness of the different biophysical stimulations for the enhancement of bone healing processes around bone implanted biomaterials.

Animals↗

PubMed2004

Natural and synthetic polyesters for musculoskeletal tissue repair: experimental in vitro and in vivo evaluations.

Two natural Biopol polyesters, containing 8% (D400G) and 12% (D600G) of hydroxyvalerate component, and a synthetic polyester based on 1,4 cyclohexanediol [Poly(cyclohexyl-sebacate)--PCS] were studied to investigate their in vitro and in vivo behavior for application in musculoskeletal tissue repair. The polyesters were placed in direct contact with L929 fibroblasts and cell proliferation (WST-1), cytotoxic effect (LDH), synthetic activity (total proteins) and cytokine production (IL-1beta, IL-6, TNFalpha) were assessed after an incubation period of 72 hours and 7 days. Then, 12 Sprague-Dawley rats underwent dorsal subcutaneous implants of tested polyesters under general anesthesia. After 1 and 4 weeks from surgery, the animals were pharmacologically euthanized and the implants retrieved with surrounding tissue for histologic and histomorphometric investigations. In vitro results showed that D600G behaved a little worse in comparison to other tested polyesters in terms of cell proliferation and TNFa at 7 days. PCS presented the lowest total protein value at 7 days. In vivo results indicated that PCS implants produced a higher (p < 0.01) extent of inflammatory tissue in comparison to D600G at 1 week and to D400G at 4 weeks, and the lowest vascular densities at both experimental times. D400G seems to be the most suitable material for biomedical application when tested in fibroblast cultures and in the subcutaneous tissue of rats.

Animals↗

PubMed2003

Histomorphometric and microhardness assessments of sheep cortical bone surrounding titanium implants with different surface treatments.

Several factors influence the healing process and the long-term mechanical stability of cementless fixed implants, such as bone remodeling and mineralization processes. Histomorphometric and bone hardness measurements were taken in implants inserted in sheep femoral cortical bone at different times to compare the in vivo osseointegration of titanium screws (diam.; 3.5 x 7 mm length) with the following surface treatments: machined (Ti-MA); acid-etched (Ti-HF); HA vacuum plasma spray (Ti-HA); and Ca-P anodization followed by a hydrothermal treatment (Ti-AM/HA). Ti-MA and Ti-AM/HA implants presented the lowest (Ra = 0.20 +/- 0.01 microm) and highest (Ra = 1.97 +/- 0.64 microm) significant (p < 0.0005) roughness value, respectively. Bone-to-implant contact of Ti-HF was lower than that of the other surface treatments at both experimental times (8 weeks: -20%, ns; 12 weeks: -30%, p < 0.01). Significant differences in MAR (mineral apposition rate) were also found between the different experimental times for Ti-MA (115%, p < 0.01) and Ti-HF (57%, p < 0.01), demonstrating that bone growth had slowed inside the screw threads of Ti-HA and Ti-AM/HA after 12 weeks. No bone microhardness changes in preexisting host bone were found, while Ti-MA showed the lowest value for the inner thread area at 8 weeks (HV(200 microm)= 49.8 +/- 3.8 HV). These findings confirm that osseointegration may be accelerated by adequate surface roughness and bioactive ceramic coating such as Ca-P anodization followed by a hydrothermal treatment, which enhance bone interlocking and mineralization.

Animals↗

PubMed2003

Biologic effects of surface roughness and fluorhydroxyapatite coating on osteointegration in external fixation systems: an in vivo experimental study.

The concomitant influence of surface roughness and fluorhydroxyapatite (FHA) coating of titanium (Ti) implants on bone response was investigated. For this purpose, titanium screw-shaped implants with a lower degree (Y371) and a higher degree (TiPore300) of surface roughness, coated with FHA and uncoated, were transversally inserted into the diaphyses of sheep tibiae for 12 weeks. Four sheep received Y371 (group A) and Y371 + FHA (group B) screws and four sheep received TiPore300 (group C) and TiPore300 + FHA (group D) screws. For each type of material, the morphology and microstructure of implant-facing bone were evaluated. The host bone of each tibia was used as a control. In all groups the bone tissue did not reach a complete maturation. The higher degree of roughness, perhaps due to an excessive irregularity of the surface, induced the worst osteointegration: a fibrous tissue layer between screw and new bone tissue was often present. Nevertheless, as viewed by XRD, no crystallographic change of the apatite lattice was observed in any of the implants. In contrast, the microhardness value, an index of bone mineralization, was higher in the uncoated screws and decreased progressively in the following order: group C > group A > group B > group D. The association of plasma spraying with roughness treatment constitutes a complex system that seems to interfere with bone mineralization. A chemical change of the surface, perhaps with more Ti release or more coating degradation, could be responsible for such impairment. The authors emphasize the necessity for simultaneous evaluation of surface topography and chemistry as well as an improvement in plasma-spraying and post-processing techniques and in standard procedures for materials characterization.

Animals↗

PubMed2003

Biological assessment of the bone-screw interface after insertion of uncoated and hydroxyapatite-coated pedicular screws in the osteopenic sheep.

The sheep seems to be a promising model of osteoporosis and biomaterial osteointegration in osteopenic bone. The long-term ovariectomized sheep model was used for the biological investigation of bone healing around uncoated and hydroxyapatite (HA)-coated pedicle screws in osteopenic bone. Four sheep were ovariectomized and four sheep were sham-operated. Twenty-four months after surgery, the animals were implanted with uncoated and HA-coated stainless steel screws in the lumbar vertebral pedicles. Four months later, bone-to-implant contact, bone ingrowth, and bone hardness were measured around screws. Uncoated stainless steel presented significantly (p < 0.0005) lower bone-to-implant contact in healthy and osteopenic bone compared with HA-coated stainless steel. HA significantly improved bone ingrowth in healthy bone (p < 0.05) compared with uncoated stainless steel. Osteopenia significantly (p < 0.05) reduced the area of bone ingrowth around the screw threads for both types of implants. In the inner thread area, bone microhardness significantly increased (p < 0.05) in HA-coated surface versus uncoated for healthy and osteopenic bone. HA coating significantly enhances bone-to-implant contact also in osteopenic bone in comparison with uncoated stainless steel surfaces. Bone ingrowth and mineralization are ameliorated by the osteoconductive HA coating. However, osteopenia seems to greatly influence bone ingrowth processes around the implanted screws regardless of the characteristics of the material surface.

Animals↗

PubMed2003

X-ray micro-diffraction analysis of reconstructed bone at Zr prosthetic surface with sub-micrometre spatial resolution.

The purpose of the present investigation is to demonstrate the power of the x-ray micro-diffraction technique in biological studies. In particular the reported experiment concerns the study of the interface between a Zr prosthetic device implanted in a rat femur and the newly-formed bone, with a spatial resolution of 0.5 microm. The obtained results give interesting information on the Zr deformation and on the crystallographic phase, the grain size and the orientation of the new bone. Moreover the study reveals a marked difference in the structure of the reconstructed bone with respect to the native bone, which cannot be appreciated with other techniques.

Animals↗

PubMed2003

Biomimetic PMMA-based bone substitutes: a comparative in vitro evaluation of the effects of pulsed electromagnetic field exposure.

Pulsed electromagnetic fields (PEMFs) are known to be effective in the stimulation of cultured osteoblasts and in vivo healing of delayed and nonunion fractures. In the present in vitro study the effects of PEMFs on osteoblastic cell cultures (MG63 human osteoblast-like cells) grown in the presence of poly-methylmethacrylate (PMMA) and of a biomimetic bone substitute made of a PMMA matrix added with alfa-tricalcium phosphate (PMMA+alpha-TCP) were evaluated, to assess the biological response at the cell-biomaterial interaction. Cultures were stimulated with PEMFs (75 Hz, 2.3 mT, 1.3-ms pulse duration) 12 h/day for 3 days and evaluations (MTT, ALP, OC, PICP, TGFbeta-1, IL-6) were performed at 3 and 6 days. PMMA had a negative effect on osteoblasts, whereas PMMA+alpha-TCP enhanced production of ALP, PICP, OC and TGFbeta-1, and reduced IL-6 levels. Cells responded positively to PEMF stimulation even when cultured with a poorly biocompatible material, such as PMMA. This effect was more evident in the presence of PMMA+alpha-TCP (further improvement in proliferation and synthetic activity) both at 3 and at 6 days. The properties of PMMA+alpha-TCP look promising, and the present results support the use of PEMFs to improve tissue response to biomaterials implanted as bone substitutes.

Bone Substitutes↗

PubMed2003

"Tumour marker guided" salvage treatment prolongs survival of breast cancer patients: final report of a 7-year study.

OBJECTIVES: Randomised trials on breast cancer showed no significant benefit from post-operative follow-up with clinical and/or conventional radiological means. We hypothesised that carcinoembryonic antigen (CEA), tissue polipeptyde antigen (TPA), breast cancer associated antigen 115 D8/DF3 (CA15.3) tumour marker panel is sensitive enough for significantly anticipating salvage treatment and prolonging survival of relapsing breast cancer patients. METHODS: From October 1981 to May 1999, 68 (62%) of 109 patients with distant metastases were recruited. Thirty-six (53%) received salvage treatment at the time of significant increase in one or more components of CEA-TPA-CA15.3 tumour marker panel and negative instrumental examinations ("tumour marker guided" treatment) and 32 (47%) were treated only after radiological confirmation of metastases (conventional treatment). The prognostic factors of the two groups did not show any statistically significant difference. RESULTS: The time from one or more tumour marker increase to clear clinical and/or radiological signs of distant metastases (lead time) was significantly prolonged in the 36 patients with "tumour marker guided" treatment (17.3 +/- 13.1 vs. 2.9 +/- 2.9 months, P < 0.001, Wilcoxon test) as well as the survival curves from salvage therapy and from mastectomy (the proportion of survivors was: at 36 months from salvage therapy 28% vs. 9%, P = 0.0094; at 84 months from mastectomy 42% vs. 19%, P = 0.0017). The multivariate Cox analysis showed that time from mastectomy to tumour marker increase and "tumour marker guided" salvage treatment were the only significantly different variables (P = 0.00001 and 0.005, respectively). CONCLUSION: These data point out that "tumour marker guided" salvage treatment significantly prolongs disease-free and overall survivals of relapsing responsive patients.

Biomarkers, Tumor↗

PubMed2003

Biomechanical and histomorphometric investigations on two morphologically differing titanium surfaces with and without fluorohydroxyapatite coating: an experimental study in sheep tibiae.

The influence of fluorohydroxyapatite (FHA) coating and surface roughness of Ti6Al4V implants on bone response was investigated. Uncoated and FHA-coated screws with lower (LR and LR+FHA; Ra: 5.7+/-0.2 microm) and higher (HR and HR+FHA; Ra: 21.8+/-0.9 microm) surface roughness, were inserted into the diaphyses of 8 sheep tibiae. Twelve weeks after implantation, extraction torque and bone-to-implant contact were evaluated. The smoothest surfaces showed an improved extraction torque and significant differences were observed between LR and HR (-24.6%, p<0.0005), LR and HR+FHA (-30.7%, p<0.0005), LR+FHA and HR (-17.4%, p<0.005), and LR+FHA and HR+FHA (-24.0%, p<0.005). The bone-to-implant contact data paralleled the biomechanical data: the smoother the surface, the greater the bone-to-implant contact. Significant (p<0.0005) decreases in bone-to-implant contact were observed between LR+FHA and HR (-24.2%), and between LR+FHA and HR+FHA (-29.2%). The current findings suggest that LR surfaces significantly improve the osteointegration rate of implanted cortical screws independently of the FHA coating.

Animals↗

PubMed2003

Surface engineering of titanium by collagen immobilization. Surface characterization and in vitro and in vivo studies.

Collagen was covalently linked to the surface of Titanium (Ti) by a surface modification process involving deposition of a thin film from hydrocarbon plasma followed by acrylic acid grafting. The composition and properties of surface-modified Ti were investigated by a number of surface sensitive techniques: XPS, ATR-IR, atomic force microscopy and AFM force-separation curves. In vitro tests were performed to check samples cytotoxicity and the behavior of osteoblast-like SaOS-2 cells. In vivo experiments involved 12 weeks implants in rabbit muscle as general biocompatibility assessment and 1-month implants in rabbit bone to evaluate the effect of surface modification on osteointegration rate. Results of XPS measurements show how surface chemistry is affected throughout each step of the surface modification process, finally leading to a complete and homogeneous collagen overlayer on top of the Ti samples. AFM data clearly display the modification of the surface topography and of the surface area of the samples as a consequence of the grafting and coupling process. AFM force-distance curves show that the interfacial structure responds by shrinking or swelling to variations of ionic force of the surrounding aqueous environment, suggesting that the aqueous interface of the biochemically modified Ti samples has enhanced degrees of freedom as compared to the inorganic surface of plain Ti. As to biological evaluations, the biochemically modified Ti samples are safe in terms of cytotoxicity and in vivo biocompatibility assessment. SaOS-2 cells growth rate is lower on collagen modified surfaces, and no significant difference is detected in terms of alkaline phosphatase production as compared to control Ti. Importantly, implants in rabbit femur show a significant increase of bone growth and bone-to-implant contact in the case of the collagen modified samples, confirming that biochemical modifications of Ti surface can enhance the rate of bone healing as compared to plain Ti.

Adsorption↗

PubMed2003

A new austenitic stainless steel with negligible nickel content: an in vitro and in vivo comparative investigation.

New nickel (Ni)-reduced stainless-steel metals have recently been developed to avoid sensitivity to Ni. In the present study, an austenitic Ni-reduced SSt named P558 (P558, Böhler, Milan, Italy) was studied in vitro on primary osteoblasts and in vivo after bone implantation in the sheep tibia, and was compared to ISO 5832-9 SSt (SSt) and Ti6Al4V. Cells were cultured directly on P558 and Ti6Al4V. Cells cultured on polystyrene were used as controls. Osteoblast proliferation, viability and synthetic activity were evaluated at 72 h by assaying WST1, alkaline phosphatase activity (ALP), nitric oxide, pro-collagen I (PICP), osteocalcin (OC), transforming growth factor-beta1 (TGFbeta-1) and interleukin-6 (IL-6) after 1.25(OH)2D3 stimulation. Under general anaesthesia, four sheep were submitted for bilateral tibial implantation of P558, SSt and Ti6Al4V rods. In vitro results demonstrated that the effect of P558 on osteoblast viability, PICP, TGF beta-1, tumor necrosis factor-alpha production did not significantly differ from that exerted by Ti6Al4V and controls. Furthermore, P558 enhanced osteoblast differentiation, as confirmed by ALP and OC levels, and reduced IL-6 production. At 26 weeks, the bone-to-implant contact was higher in P558 than in SSt (28%, p<0.005) and Ti6Al4V (4%, p<0.05), and was higher in Ti6Al4V than in SSt (22%, p<0.005). The tested materials did not affect bone microhardness in pre-existing host bone as evidenced by the measurements taken at 1000 microm from the bone-biomaterial interface (F=1.89, ns). At the bone-biomaterial interface the lowest HV value was found for SSt, whereas no differences in HV were observed between materials (F=1.55, ns). The current findings demonstrate P558 biocompatibility both in vitro and in vivo, and osteointegration processes are shown to be significantly improved by P558 as compared to the other materials tested.

Alloys↗

PubMed2003

Comparative interspecies investigation on osteoblast cultures: data on cell viability and synthetic activity.

The aim of the present study was to evaluate and compare the most common parameters that characterize the expression of primary osteoblast cultures from different origin (human, rat, sheep), and of the human osteosarcoma cell line MG-63 before and after stimulation with vitamin 1,25(OH)(2)D(3). Cell viability was quite similar for primary osteoblast cultures (MTT: 1.64-2.11 OD); a significant (P < 0.005) difference was found between sheep osteoblasts and MG-63 (DeltaMTT: 0.52 +/- 0.20 OD). Osteocalcin synthesis ranged from 15.18 to 27.00 pg/ml in primary osteoblast cultures, while it was significantly (P < 0.01) lower in MG-63 (OC: 6.67 +/- 0.52 pg/ml) when compared with primary human osteoblasts. Alkaline phosphatase, C-terminal procollagen type I, and interleukin-6 were significantly (P < 0.005) lower in rat osteoblasts when compared with primary human osteoblasts, and similarly transforming growth factor-beta1 was significantly (P < 0.05) lower in rat and sheep osteoblasts when compared with primary human osteoblasts and MG-63. Nitric oxide synthesis did not show any significant difference either before or after vitamin 1,25(OH)(2)D(3) stimulation. In conclusion, the current findings confirm the presence of interspecies differences between the selected osteoblast lineages before and after stimulation with vitamin 1,25(OH)(2)D(3). Above all, the culture of sheep osteoblasts was seen to behave more similarly to that of primary human cells, mainly in terms of cell viability, osteocalcin, interleukin-6 and transforming growth factor-beta1 production.

Animals↗

PubMed2003

Exploring the damage limitation possibilities of mineral fibres for future integrated solutions: an in vitro study.

Owing to their possible carcinogenic effect, asbestos and other silica derivatives have been identified as priority substances for risk reduction and prevention of pollution. Neutralisation procedures have thus become a topical research subject in many European and American countries. In the present study, silica derivatives (asbestos-containing and asbestos substitutes like slag wool, rock wool, cement asbestos) were fully impregnated with an epoxy resin according to the procedure used for the in situ impregnation with viscous polymeric media, which penetrate and cement the fibres in place and reduce the risk of their dispersion in air. Untreated and treated samples were used to investigate their in vitro interaction with a human continuous epithelial cell line (NCTC 2544 keratinocytes) and test the resin's efficiency in passivating the surface activity of the fibrous particulate. SEM and morpho-quantitative data evidenced that impregnation with the epoxy resin modifies the mineral fibres' bioactivity (reduction of cell adhesion and decreased spread/round cell ratio) and demonstrated the value of in vitro cell testing after passivation as a risk-assessment procedure. These tests could be used for the rapid determination of the level of passivation of new synthetic mineral fibrous materials subjected to resin impregnation.

Air Pollutants, Occupational↗

PubMed2003

In vitro behaviour of osteoblasts cultured on orthopaedic biomaterials with different surface roughness, uncoated and fluorohydroxyapatite-coated, relative to the in vivo osteointegration rate.

The effects of two surfaces with different roughness (Low Roughness, LR: Ra: 5.6-5.9 microm; High Roughness, HR: Ra: 21.5-22.5 microm), uncoated and fluorohydroxyapatite(FHA)-coated, were investigated in MG-63 osteoblasts. At 72 hours, cells proliferated on biomaterials more slowly than in the control group (p < 0.0001), the proliferation rate was higher on FHA-coated LR than uncoated HR (p = 0.037). Collagen-I production was positively affected by the LR surface (p = 0.001) as compared to controls, while it was significantly lower (p = 0.0001) in the HR surfaces. Compared to controls, LR and HR surfaces led to enhanced production of TGF-beta1, further improved by FHA (FHA-coated LR: p = 0.007; FHA-coated HR p < 0.0001 respectively). ALP, OC, IL-6 and TNF-alpha levels were not significantly different from the controls. Results suggest that collagen-I production could be useful in predicting the in vivo osteointegration rate of biocompatible biomaterials observed in previous studies.

Alkaline Phosphatase↗

PubMed2003

In vitro biocompatibility of titanium oxide for prosthetic devices nanostructured by low pressure metal-organic chemical vapor deposition.

Metal-Organic Chemical Vapor Deposition (MOCVD) has recently been proposed to coat orthopedic and dental prostheses with metal nanostructured oxide films through the decomposition of oxygenated compounds (single-source precursors) or the reaction of oxygen-free metal compounds with oxygenating agents. The present study was carried out to assess the in vitro biocompatibility in terms of cell proliferation and activation, of commercially pure Ti (control material: TI/MA) coated with nanostructured TiO2 film by MOCVD (Ti/MOCVD) using osteoblast-like cell cultures (MG-63). Evaluations were performed at 3, 7 and 14 days. Cell proliferation showed a similar trend for Ti/MA and TilMOCVD compared to polystyrene; cell number increased with time from seeding to day 7 (p < 0.005), and then decreased progressively until day 14 (ranging from -14% to -47%). The ALP level and OC production showed no significant differences between Ti/MOCVD and Ti/MA at each experimental time. Significantly higher ALP levels were found in Ti/MA at 3 days and in Ti/MOCVD at 7 and 14 days when compared to the polystyrene group. OC production decreased over time and the highest values were observed at 3 days, when it was significantly higher in the Ti/MA than in the polystyrene group (50%, p < 0.05). CICP synthesis was positively affected by the presence of Ti/MOCVD and was higher in Ti/MOCVD than in the polystyrene group. No significant differences were found between Ti/MOCVD and Ti/MA in terms of IL-6 and TGF-beta1 synthesis at any experimental time. In conclusion, the current findings demonstrate that the nanostructured TiO2 coating positively affects the osteoblast-like cell behavior in terms of cell proliferation and activity, thus confirming its high level of in vitro biocompatibility in accordance with expectations.

Biocompatible Materials↗

PubMed2003

Biomaterials in orthopedic surgery: effects of a nickel-reduced stainless steel on in vitro proliferation and activation of human osteoblasts.

A new austenitic stainless steel compound, P558, has been widely recognized to have good mechanical properties, excellent potential for corrosion resistance and negligible nickel ion release, making it a promising substitute for more expensive metallic prostheses with limited machinable features. The effect of P558 was studied in vitro and human osteoblast- like cells (MG63) were cultured directly on P558, Ti6Al4V alloy (Ti), and polystyrene (Control) for 72 hours. Osteoblast functions were evaluated by assaying cell proliferation and synthetic activity after 1.25(OH)2D3 stimulation. Results demonstrated that growth of MG63 on P558 was not negatively affected when compared to the Ti and Control groups and showed no alteration in the production of ALP, NO and PICP. Moreover, IL-6 was lower, whereas OC and TGFbeta1 were significantly higher. SEM images revealed that cells proliferated and differentiated on P558 without any alteration in their morphology. The current findings have demonstrated that P558 promotes osteoblast proliferation, activation and differentiation without negative effects and, thus, its good biocompatibility when used for orthopedic application.

Alloys↗

PubMed2003

Tailoring biomaterial compatibility: in vivo tissue response versus in vitro cell behavior.

Biocompatibility relies essentially on surface phenomena, represented by cell-cell, cell-material and material (polymer)-protein interactions. An in vivo and in vitro experimental investigation was carried out on the biomaterials of two different classes with a good potential for in situ utilisation. Non-resorbable (Polypyrrole, Polyaniline, Polyimide) and resorbable (PLLA-PDXO-PLLA) materials for tissue engineering were studied for their overall tissue tolerance and cellular interactions. These non-resorbable polymers conceived for biosensor applications and implantable drug-delivery systems are intrinsically conductive. The PLLA-PDXO-PLLA triblock copolymer showed interesting tensile properties for bone and cartilage tissue engineering due to the presence of 1,5-dioxepan-2-one. In vitro and in vivo parallel studies showed an interesting correspondence: a) the cells in contact with the resorbable material that appeared to be capable of migratory-regenerative aspects in vitro exhibited good compatibility in vivo; whereas b) the non-resorbable materials, which are designed to remain in situ in vivo, were seen to have the potential to represent an adverse factor (inflammation, fibrotic reactions) that correlated with some aspects of cell behaviour in vitro.

Absorbable Implants↗