Effect of the topical application of nitroglycerin on intraocular pressure in normal and glaucomatous monkeys.
Explore the source record for details and available documents.
Animals↗
Biomedical subjects
R F Wang
Publications and source records attributed to R F Wang.
The use of PCR to monitor the population abundance of six human intestinal bacterial species in an in vitro semicontinuous culture system.
Six PCR primer sets complementary to the 16S rDNAs (rRNA genes) were developed and shown to be specific for the following anaerobic bacteria: Clostridium clostridiiforme, C. perfringens, C. leptum, Bacteroides vulgatus, B. distasonis, and B. thetaiotaomicron, respectively. These primers were used for PCR to detect and monitor the bacteria in a semicontinuous culture system designed to mimic intestinal microflora in the human gastrointestinal tract. Except for C. perfringens, the five species of Bacteroides and Clostridia present in the in vitro culture system were detected by the PCR, and the titers varied from 10(-2) to 10(-6) dilutions. The role of azo dye reduction by these bacterial species in the system was examined and discussed.
Bacteria, Anaerobic↗
Molecular cloning and characterization of murine cyclin E.
Using a monoclonal antibody developed to a mouse trophectodermal carcinoma stem cell line E6496D lysate, we have identified the gene that encodes murine cyclin E. The cDNA contains a consensus cyclin box and a long 3' untranslated region and shares over 75% homology with human cyclin E cDNA. We show that the gene is expressed in fetal tissues, embryonal carcinoma F9 cells and yolk sac carcinoma PYS-2 cells, but is not expressed in preimplantation stages of development. In adult tissues, cycE mRNA is detectable in the spleen and to a lesser extent in the testis and brain. These data show that cycE is developmentally regulated and unevenly expressed in fetal and adult mouse tissues.
3T3 Cells↗
Effects of topical ethacrynic acid ointment vs timolol on intraocular pressure in glaucomatous monkey eyes.
OBJECTIVE: To evaluate the long-term effects of ethacrynic acid (ECA) ointment, compared with timolol maleate on intraocular pressure (IOP) in cynomolgus monkey eyes with argon laser-induced glaucoma. METHODS: In a 5-day study, IOP was measured for 7 hours after once-daily topical applications of ECA ointment to four glaucomatous monkey eyes. For this study, ECA ointment was given in 0.5%, 1.0%, 1.5%, or 2.5% concentrations. In a separate 30-day study, IOP was measured after once-daily topical applications of ECA ointment in concentrations of 0.75% or 1.5%. The results were compared with IOP after the application of 0.5% timolol maleate administered twice daily on weekdays and once daily on weekends. RESULTS: In the 5-day study, 2.5% ECA ointment had the greatest effect on lowering IOP, with a maximum reduction of 8.5 +/- 2.9 mm Hg (mean +/- SEM). A more pronounced reduction in IOP was observed on the fifth day of treatment for each of the four concentrations. In the 30-day study, 1.5% ECA ointment or 0.5% timolol maleate reduced IOP as much as 11.5 +/- 3.7 mmHg and 14.0 +/- 4.5 mmHg, respectively. With repetitive dosing, the effect on IOP after using 1.5% ECA ointment increased with time. Mild eyelid edema, conjunctival hyperemia, and discharge were observed in some eyes treated with the highest concentrations. One eye of four treated with 1.5% ECA ointment for 30 days developed a superficial corneal erosion in the 30-day study. CONCLUSIONS: The ECA ointment reduced IOP in glaucomatous monkey eyes. This reduction was evident by the fifth day of treatment with all the concentrations tested. The reduction in IOP produced by once-daily treatment with 1.5% ECA ointment was comparable with that of 0.5% timolol maleate administered twice daily. Therefore, drugs in this class of compound may prove to be useful in glaucoma therapy.
Administration, Topical↗
A 16S rDNA-based PCR method for rapid and specific detection of Clostridium perfringens in food.
A 16S rDNA-based polymerase chain reaction (PCR) method was developed for the rapid and specific detection of Clostridium perfringens in food. The PCR primers were designed by a GenBank computer search and they are complementary only with the 16S rRNA gene of C. perfringens by sequence alignment. The PCR product is a 279 BP DNA fragment. All C. perfringens strains tested were positive in the PCR assay and all other species tested were negative, including 11 other species of Clostridium and 38 species of other common bacteria. As few as two cells of C. perfringens in pure culture were detectable. High numbers of other bacterial species did not interfere with the detection of C. perfringens. The PCR amplification required only 30 min to complete. The method can be used for detection of C. perfringens in contaminated food. Samples from 100 g of chicken drumsticks which were inoculated with 20, 200 or 2000 cells of C. perfringens were subjected to the PCR assay and all produced positive results.
Animals↗
A 16S rRNA-based DNA probe and PCR method specific for Listeria ivanovii.
A 16S rRNA-based DNA probe and polymerase chain reaction (PCR) method was developed for identification and rapid detection of Listeria ivanovii. The probe (R-1) is 5'-GTAGTGACGCATGTCATCAC-3' corresponding to positions 185-204 in the L. ivanovii 16S rRNA sequence. DNA hybridization results indicated that R-1 probe only reacted with L. ivanovii, and not with six other species of Listeria or other bacteria tested. The PCR method using R-1 and a reverse primer, R-2, was positive with all eight strains of L. ivanovii tested but was negative with six other species of Listeria, including nine strains of L. monocytogenes, and 20 other taxonomically related bacteria tested. In our PCR method, starting with whole bacterial cells, only 3 h were required for the PCR assay and 1 h for electrophoresis without any additional time for DNA isolation and DNA hybridization. This PCR method detected as few as 4 cells of L. ivanovii in pure cultures and 4-40 cells of L. ivanovii in inoculated and diluted mouse feed, blood, or faeces samples.
Base Sequence↗
Effect of oxymetazoline on aqueous humor dynamics and ocular blood flow in monkeys and rabbits.
OBJECTIVE: To evaluate the ocular effects of oxymetazoline hydrochloride, an alpha 2 agonist, in cynomolgus monkeys and albino rabbits. METHODS: Intraocular pressure was measured before and for 6 hours after application to glaucomatous monkey eyes. Outflow facility and aqueous flow rates were measured in normal monkey eyes. Uveoscleral outflow was measured in rabbit eyes. Ocular peak pulse volume was determined with the ocular blood flow system in normal and glaucomatous monkey eyes. RESULTS: Single applications of ozymetazoline reduced (P < .001) intraocular pressure up to 6.0 +/- 1.0 mm Hg (mean +/- SEM). Enhancement of the ocular hypotensive effect was observed with 5-day twice-daily administration. Outflow facility was unaltered; aqueous flow rate was decreased (P < .001) by 39% in the treated eyes compared with baseline values; and uveoscleral outflow was increased (P < .005) by 56% in the treated eye. Peak pulse volume was unchanged. CONCLUSION: Oxymetazoline reduces intraocular pressure by decreasing aqueous humor flow rates and increasing uveoscleral outflow. Oxymetazoline may have clinical potential as an ocular hypotensive drug.
Animals↗
Development and evaluation of the polymerase chain reaction method for diagnosis of Mycoplasma gallisepticum infection in chickens.
A polymerase chain reaction (PCR) method specific for Mycoplasma gallisepticum (MG) was evaluated. The PCR method was found to detect as few as two colour changing units (CCU) of MG and did not give false positive reactions with other avian mycoplasmas. In chickens inoculated with either MG or Mycoplasma synoviae (MS), the PCR method was found to closely correlate with MG culture reisolation methods in chicken intranasally inoculated with MG. All chickens inoculated with MS tested negative using the MG PCR method.
Administration, Intranasal↗
Measurement of composite resin filler particles by using scanning electron microscopy and digital imaging.
Composite resins are routinely classified on the basis of filler particle size for purposes of research, clinical applications, and communications. The size and characterizations of filler particles have also been considered a significant factor in the rate of wear of composites. Making valid correlations between the filler particles within a composite and wear requires accuracy of filler particle size and characterization. This study was initiated to examine two methods that would (1) qualify the filler particle content of a composite resin and (2) quantify the number, size, and the area occupied by the filler particles in composite resins. Three composite resins, BIS-FIL I, Visio-Fil, and Ful-Fil, were selected as the materials to be examined, on the basis of their published composite classification type as fine particle. The findings demonstrated that scientific methods are available to examine qualitatively and measure quantitatively the composite resin filler particles in terms of their numbers, sizes, and area occupied by use of a scanning electron microscope and digital imaging. Significant differences in the filler particle numbers, sizes, and the area occupied were found for the three composite resins in this study that were classified as fine particle.
Acetone↗
[Measurement of the single muscle fiber action potentials and jitter value in tibialis anterior muscles of rabbits in situ].
With a home-made jitter data processing board and microcomputer for recording extracellular single fiber action potential (SF-AP), variations of the time intervals of the SF-AP pairs, or the jitters, from two adjacent muscle fibers in the unique motor unit in tibialis' anterior in response to repeated stimuli were measured. The jitter distribution of 936 recorded from 7 rabbits was positively showed with a percentile value of P75-P25 of 54.99-14.61 microseconds. The data suggested that the lower limit was smaller than that of skeletal muscles in normal human and that there exists also some differences in the jitter values of SFEMG between human and rabbit muscles.
Action Potentials↗
Effects of Al3+ and Be2+ ions combined with NaF on ciliary process adenylyl cyclase activity and aqueous humor dynamics in the rabbit eye.
PURPOSE: The activity of Al3+, Ga3+, and Be2+ ions in the presence of NaF to directly activate G-proteins was investigated by their potentiative effect on forskolin (FSK)-activated adenylyl cyclase in rabbit ciliary process membranes and their effects on aqueous humor dynamics in vivo. METHODS: Adenylyl cyclase (AC) was determined by radiometric conversion of ATP to cAMP by the particulate fraction of rabbit ciliary processes. Intravitreal injections of sterile solutions of analytical grade salts were made into the center of the vitreous in a volume of 20 microliters. Intraocular pressure, aqueous humor flow, and uveoscleral outflow measurements were made by pneumatonometry, fluorophotometry, and fluorescein-dextran method, respectively. Outflow facility was determined by tonography in the intact eyes and by two-level constant pressure perfusion in cannulated eyes. RESULTS: Both Al3+ (EC50, 40 mumol/l) and Be2+ (EC50, 11 mumol/l) in the presence of 0.5-2 mM NaF activated the stimulatory G-protein Gs. Ga3+ was ineffective and did not antagonize the activation by Al3+. Intravitreal injections of Al3+ (1 mumol/eye) or Be2+ (0.5 or 1 mumol/eye) had no significant intraocular pressure (IOP) effect, nor did 1.5 or 3 mumol/eye of NaF, but when either cation was injected together with NaF, IOP decreased by up to 40% for up to 140 hr. At the time of maximum IOP effect (72 hr) aqueous humor flow determined by fluorophotometry was decreased in BeCl2+ NaF-treated eyes by 40% relative to BeCl2-treated eyes; however, tonographic facility of outflow was unaffected. Uveoscleral flow was also decreased by 38% in BeCl2+ NaF treated eyes. CONCLUSIONS: These findings support the hypothesis that Gs activation of ciliary process adenylyl cyclase decreases aqueous humor formation rate in rabbit eyes, and that activation of G-proteins mediates contraction of ciliary muscles causing a decrease of aqueous humor outflow via the uveoscleral route. The results suggest that G-proteins putatively involved in trabecular facility changes are less sensitive to activation by BeF3- than are other parameters of aqueous humor dynamics.
Adenylyl Cyclases↗
Analysis of purified human liver alpha-L-fucosidase by western-blotting with lectins and polyclonal and monoclonal antibodies.
Western-blot analysis [with lectins, polyclonal antibodies (pAbs) and four monoclonal antibodies (mAbs)] was employed to investigate the structural relationship between the separated isoforms and subunits of purified human liver alpha-L-fucosidase. SDS/PAGE and Western-blot analysis indicated the presence of two protein bands of 51 kDa and 56 kDa that were recognized by the pAbs. Polyacrylamide-gel isoelectric focusing (PAG-IEF) followed by blotting indicated that the pAbs and mAbs recognized at least five fucosidase isoforms (pI values 3.6-6.0). Lectin blotting indicated an enrichment of sialic acid residues in the more acidic isoforms. Western-blot analysis indicated that four mAbs recognized the 51 kDa subunit and at least two mAbs recognized the 56 kDa subunit. The subunit composition of the isoforms (separated by PAG-IEF) of human liver alpha-L-fucosidase was investigated by SDS/PAGE. One or two closely spaced bands were found for each isoform with a trend of increasing relative amounts of the high-molecular-mass band in the more acidic isoforms relative to the more neutral isoforms. Neuraminidase treatment of alpha-L-fucosidase resulted in a decrease in the amount of the high-molecular-mass subunit and an increase in the amount of the low-molecular-mass subunit, suggesting that these subunits are related at least in part by sialic acid residues. In addition, blotting with lectins indicated the presence of sialic acid residues only in the high-molecular-mass subunit. N-Glycanase treatment led to the disappearance of the glycosylated 56 kDa and 51 kDa protein bands and the appearance of non-glycosylated protein bands at 48 kDa and 45 kDa. The overall results indicate that (1) N-glycosylation contributes to, but does not account completely for, structural differences in the fucosidase subunits and (2) the more acidic isoforms of fucosidase contain enriched relative amounts of the sialylated high-molecular-mass subunit.
Animals↗
Development of cell surface protein associated gene probe specific for Listeria monocytogenes and detection of the bacteria in food by PCR.
A genomic library of L. monocytogenes was constructed using lambda Zap II-Eco RI and screened with a monoclonal antibody which is specific for a Listeria cell surface protein. Three positive clones each contained a 6.5 kb insert which in E. coli could express the same Listeria protein. The 6.5 kb insert was further digested with Hin dIII and the smaller fragments were subcloned into a plasmid vector (pBluescript) and screened with 32P-labelled genomic DNA from L. monocytogenes or L. innocua. Three clones which were positive with L. monocytogenes and negative with L. innocua were screened and each contained a 2.1 kb insert. The 2.1 kb insert was partly sequenced and some candidate oligomer probes from the sequences were selected and compared with sequences in a Genbank computer search. One such oligomer probe (T7-list) was confirmed to be specific for L. monocytogenes. The probe hybridized with all 28 strains of L. monocytogenes tested, but not with any of six other Listeria species nor 11 other bacteria tested. Using this probe-primer, a PCR method was developed which could detect as few as 2 cfu of L. monocytogenes in pure cultures, and as few as 4-10 cfu of L. monocytogenes when inoculated into foods.
Antibodies, Monoclonal↗
Early detection of osseointegration using scanning electron microscopy and the interfacial biopsy chamber: a pilot study.
This pilot project attempted to demonstrate microscopic evidence of osseointegration in a controlled environment as originally presented by Brånemark. The Interfacial Biopsy Chamber was developed to collect titanium/tissue serial biopsies of the implant-tissue interface at various stages of wound healing. It was surgically placed in two Flemish giant rabbits and titanium/tissue biopsies were collected at 35 and 70 days. The biopsies were examined using scanning electron microscopy (x2000, x3200, and x7500) and light microscopy (x230). Osseous tissue was found in intimate contact with the titanium implant surface with no evidence of an intervening fibrous layer. Cells with the morphological characteristics of osteoblasts were observed covering the titanium surface. Processes extending from the main body of these cells were in intimate contact with the titanium surface, following the machining striations. The photomicrographs were similar to those presented earlier by Brånemark. The project also suggested the use of the Interfacial Biopsy Chamber as a research instrument for the collection of implant/tissue interface serial biopsy samples.
Animals↗
Filler particle size and composite resin classification systems.
The currently used composite resin classification systems need review if they are to continue to serve as descriptives and quantitative parameters denoting the filler particle content of these materials. Examination of the particles in 12 composite resins using a technique of washing the filler particles from the matrix of the composite resin was presented as yet another method of grouping composites according to filler particle content. Light microscopic examination of the filler particles that remained provided a separation of the 12 materials into four easily distinguished groups based on filler particle sizes. The wear of the 12 composite resins determined in a previous study was examined in relation to the classification of the materials by the currently available systems. The wear values were also examined using the groupings of the materials according to their filler particle sizes as determined by separating the particles from the matrix by the washing technique. Grouping composites on the basis of the filler particle sizes found after washing was easily correlated with wear and supported the suggestion that composites with smaller filler particles wear less.
Acrylic Resins↗
The in vivo wear resistance of 12 composite resins.
PURPOSE: The in vivo wear resistance of 12 composite resins were compared with an amalgam control using the Latin Square experimental design. Sixteen edentulous patients wearing specially designed complete dentures formed the experimental population. MATERIALS AND METHODS: The Michigan Computer Graphics Measurement System was used to digitize the surface of the control and composite resin samples before and after 3-month test periods to obtain wear data. The 12 composite resins selected for this investigation based on their published composite classification types were seven fine particle composites, three blends, and two microfilled composite resins. The Latin Square experimental design was found to be valid with the factor of material being statistically different at the 5% level of significance. Wear was computed as volume loss (mm3/mm2), and all of the composites studied had more wear than the amalgam control (P = .001). RESULTS: After 3 months, the mean (error) of wear of the amalgam was 0.028 (0.006). Means (error) of wear for the 12 composites were ranked from most to least wear by mean wear volume loss. CONCLUSION: The absence of any relationship between mean wear volume loss and the volume percentage filler was confirmed by the correlation coefficient r = -0.158.
Analysis of Variance↗
16S rRNA-based probes and polymerase chain reaction method to detect Listeria monocytogenes cells added to foods.
A rapid polymerase chain reaction (PCR) method was developed for detection of Listeria monocytogenes in foods. This method used a pair of primers based on a unique region in the 16S rRNA sequence of L. monocytogenes, which were previously reported by us to yield a specific nucleic acid probe. Our method included use of a shorter denaturing time, a shorter annealing time, a rapid transition, and an increase in the number of cycles, resulting in good sensitivity. Just 3 h for PCR plus 1 h for electrophoresis was required. Additional time for DNA isolation and DNA hybridization was not needed. This method detected as few as 2 to 20 CFU of L. monocytogenes in pure cultures and as few as 4 to 40 CFU of L. monocytogenes in inoculated (10(8) CFU), diluted food samples. Seven of eight foods, including four poultry products, gave positive results. Only one food sample, soft cheese, gave interference. An internal probe hybridization test was used to confirm that the PCR products were from L. monocytogenes. A specificity test indicated that this PCR method was positive for all 13 strains of L. monocytogenes tested but negative for the other 6 species of Listeria, including 6 strains of L. innocua, and negative for 17 other gram-positive and gram-negative bacteria tested.
Base Sequence↗
[Self care in the prevention of diarrhea].
Explore the source record for details and available documents.
Cost-Benefit Analysis↗