Search PubMed⌕ Search

Biomedical subjects

R F Edlich

Publications and source records attributed to R F Edlich.

At least 55 records · Page 3Linked to original sources

Effectiveness of glycomer 631 monofilament sutures in closing musculoaponeurotic incisions.

The purpose of this study was to quantitate the effect of two monofilament synthetic absorbable sutures as well as a new monofilament synthetic absorbable suture, glycomer 631, in healing musculoaponeurotic incisions in rats. Because these three monofilament synthetic absorbable sutures provided secure closure of laparotomy incisions, their clinical use in laparotomy incisions is recommended.

Abdominal Muscles↗

Latex glove penetration by pathogens: a review of the literature.

Universal precautions mandate the use of examination and surgical gloves to protect the health professional from contact with the HIV virus. The purpose of this paper is to provide a review of the literature on the barrier properties of examination and surgical gloves measured by water leakage and viral penetration. The literature data indicate that glove composition, glove manufacturer, glove design (examination vs. surgical), and mechanical manipulation had considerable influence on glove performance when tested for leakage and viral penetration. In general, latex gloves were found to be superior to vinyl gloves as barriers to water leakage and viral penetration.

Bacteriophage phi X 174↗

Influence of latex glove hydration on bacteriophage penetration.

The purpose of this study was to determine whether glove hydration influenced bacteriophage penetration. Using an electronic glove hole-detection device, one brand of latex glove was identified that hydrated rapidly (3.25 min +/- 0.71 min), while another brand was selected that resisted hydration (120 min +/- 0 min). Using a standard bacteriophage penetration model, the amount of bacteriophage penetration in both the rapidly hydrating gloves and the gloves that resisted hydration was extremely small and did not differ significantly from each other.

Bacteriophage phi X 174↗

Latex protein levels in external condom catheters.

The Food and Drug Administration (FDA) allows for labeling medical products that have reduced levels of total water-extractable latex protein. The standard test method of the American Society for Testing and Materials (ASTM) for analysis of latex protein in natural rubber and its products is a colorimetric assay with a precipitation step called the modified Lowry assay. In an analysis of latex external condom catheters, we have documented a significant difference in protein levels between two brands of external condoms. The modified Lowry assay is a significantly less specific method than is an immunochemical assay for measuring total water-extractable latex proteins. This nonspecificity of the modified Lowry assay makes it difficult to accurately identify medical products with extremely low levels of total water-extractable latex protein.

Antigens↗

A new silver sulfadiazine water soluble gel.

Silver sulfadiazine is the most commonly used topical antibacterial agent for the treatment of burn wounds. It has many clinical advantages, including a broad spectrum of antimicrobial activity, low toxicity, and minimal pain on application. The current formulation of silver sulfadiazine contains a lipid soluble carrier, polypropylene glycol, that has certain disadvantages, including pseudo-eschar formation and the need for twice daily application. The purpose of this investigation was to describe a new formulation of silver sulfadiazine in a water soluble gel, poloxamer 188. The antibacterial activity of this new gel has been compared to that of the commercially available silver sulfadiazine cream by in vitro and in vivo testing. The results of the in vitro antibacterial testing of these two different agents demonstrated the superiority of the new gel formulation. In experimental wounds, the antibacterial activity of the gel and the commercially available silver sulfadiazine cream were not significantly different when applied once a day. The antibacterial activity of the gel when applied once a day was comparable to that encountered by twice daily applications of the silver sulfadiazine cream by experimental wounds. The major advantage of this gel was its ease of application and removal that is attributed to its water solubility.

Administration, Topical↗

A new stable pluronic F68 gel carrier for antibiotics in contaminated wound treatment.

Pluronic F68 was selected as the gel carrier for antimicrobial agents because of its extensive use as a wound cleanser in humans without discernable side effects. When the concentration of this surfactant is increased to 46%, it forms a water soluble gel that can serve as a carrier for antimicrobial agents. The stability of this gel can be enhanced by immediately cooling (-15 degrees C) the gel for 24 hours before storage and subsequent application. Immediate cooling of the gel causes hydration of the surfactant that is associated with gel strengthening and prolonged shelf life stability. In experimental animals, this stable gel carrier containing 0.2% nitrofurazone significantly reduces the bacterial concentration of Staphylococcus aureus in wounds to a greater degree than silver sulfadiazine. This antimicrobial gel has the same antimicrobial activity as polyethylene glycol carriers containing 0.2% nitrofurazone, but does not carry the potential risk of polyethylene glycol intoxication.

Animals↗

Peritoneal healing with adhesion formation: current comment.

Intra-abdominal adhesions are fibrotic structures, which lie in the form of a string or attachment between the abdominal organs and connect these together. They are responsible for serious clinical complications that include intestinal obstruction, infertility, and pelvic pain. During the last century, surgeons' comprehensive understanding of the biology of peritoneal healing and wound repair has allowed them to identify a variety of new therapeutic techniques that limit the development of adhesion formation. New drugs, dextran 70 and poloxamer 407, have been developed to prevent adhesion formation. In addition, three new biomaterials (oxidized regenerated cellulose, hyaluronate membrane, and polytetrafluoroethylene) are synthetic barriers being used to prevent adhesions.

Biocompatible Materials↗

A technique for quantifying the performance of oscillating bone saw blades.

A new model has been developed to evaluate the performance of oscillating surgical saw blades used in medical-implant procedures. A test apparatus was constructed to maintain a constant cutting force between a blade driven by a pneumatic powered oscillating saw and the bone. Evaluations of saw-blade performance were determined using the following outcome measures: cutting time, volume of bone removal, and peak cutting temperature. Two popular, commercially available blades similar in size and tooth geometry were evaluated. This model identified differences in the performance of these two types of oscillating saw blades.

Animals↗

Durability of oscillating bone saw blades.

The purpose of this study was to measure the durability of disposable saw blades using a standard bone-cutting experimental model that can be replicated in any laboratory. Using a constant cutting force, the bone-cutting efficiency was determined by recording the maximum cutting temperature and the rate of material removal. In this experimental study, porcine femurs as well as a synthetic bone substitute were used as the test samples for measuring cutting efficiency. Repeated cutting of these test materials did not significantly alter the performance of the disposable bone-cutting blades.

Animals↗

Innovations in oscillating bone saw blades.

The purpose of this study was to identify some of the determinants of saw-blade design that influence bone-cutting performance. Using a reproducible experimental model, saw-blade performance was judged by measuring the blade temperature and the rate of bone removal. The results of this study demonstrated that the rake angle and blade swing radius had significant influence on saw-blade performance.

Animals↗

A new computerized control unit for small bone surgical instruments.

The SmartDrive console represents an important advance in small bone surgery because it monitors and coordinates the operation of its handpieces. The SmartDrive console has the following unique features: 1) a handpiece recognition system; 2) an instrument speed display; 3) a handpiece display and monitoring system; 4) a torque instrument control system; 5) a temperature monitoring system; 6) and an irrigation system. Mechanical performance studies have been undertaken that have validated the accuracy of the monitoring systems of the consoles. The consoles provided reliable recordings of the rotational speeds of their hi-speed drills. The MicroAire console automatically shuts off its power as the temperature increased to 110 degrees F (43 degrees C). In contrast, the Stryker Command 2 console has a limited monitoring system that can not alter the operation of the handpieces.

Bone and Bones↗

Needle puncture resistance of surgical gloves, finger guards, and glove liners.

New puncture resistant materials are being developed for health professional use as protection against disease and needle stick injuries. The needle puncture resistance of protective gloves and glove liners from DePuy DuPont Orthopaedics and of finger guards from Zimmer was evaluated using a computerized needle penetration system to determine maximal penetration forces and the penetration work required for taper point and for cutting edge needles to penetrate these membranes. The Medak portion of the Life Liner glove liner and the Spectra portion of the FingGuard finger guard offered remarkable resistance against needle penetration as compared to the other glove liners and gloves tested. The cutting edge needles required considerably less penetration force and work to penetrate the FingGuard and Life Liner than that required with comparable size taper point needles. Because these unique protective materials had a limited distribution over the hand, the surgeon's hand remained susceptible to inadvertent needle puncture. While this protection against needle penetration in the Life Liner and the FingGuard represents an exciting advance in surgery, it is important to emphasize that this development is only one consideration in the selection of surgical gloves.

Biomechanical Phenomena↗

Effect of puncture resistant surgical gloves, finger guards, and glove liners on cutaneous sensibility and surgical psychomotor skills.

New puncture and cut resistant hand protection systems have been developed to enhance the barrier to cuts and needle puncture injuries during surgical procedures. It is important, however, that these new hand protection systems do not reduce tactile sensitivity or dexterity during surgery. Consequently, it was the purpose of this report to compare the cutaneous sensibility and dexterity of physicians' hands covered by these new puncture and cut resistant hand protection systems to that of the standard surgical latex glove. The hide (Medak) portion of the Life Liner and the polyethylene (Spectra) portion of the FingGuard, which offered the greatest resistance to needle puncture, were associated with the greatest reduction in cutaneous sensibility, as determined by moving and static two-point discrimination, aesthesiometer pressure sensation, and discrimination of suture size and configuration. In addition, the physicians believed that the puncture and cut resistant Life Liner glove liner markedly interfered with their handling of surgical instruments. The ultimate benefit of these puncture and cut resistant hand protection systems must be determined in well-controlled clinical trials.

Discrimination, Psychological↗

Knot performance of polypropylene sutures.

A mechanical performance test using an Instron Tensile Tester demonstrated the superior handling characteristics of Surgipro suture as compared to Prolene suture that facilitated knot construction without suture breakage. For both granny and square knots, the knot run down forces for the Surgipro sutures were significantly less than those encountered for comparable knots for Prolene sutures. This propensity of the two-throw knots of Surgipro sutures to advance without breakage considerably facilitated knot construction.

Materials Testing↗