Search PubMed⌕ Search

Biomedical subjects

R Egel

Publications and source records attributed to R Egel.

At least 19 recordsLinked to original sources

Fission yeast on the brink of meiosis.

The fission yeast Schizosaccharomyces pombe (S. pombe) is now well established as a versatile genetic model organism. It is widely used to analyse the basic eukaryotic cell cycle during vegetative growth and it is also well suited to studies on the elementary processes of sexual reproduction, including intercellular communication and signal transduction in zygote formation, as well as meiosis before sporulation. Systematic mutant screening has contributed much to our current understanding of unicellular differentiation in S. pombe, and structural analysis has revealed a simplified meiotic prophase with abundant crossing-over but no homologue synapsis. This article is a personal account of how this branch of fission yeast genetics has developed.

Denmark↗

FH3, a domain found in formins, targets the fission yeast formin Fus1 to the projection tip during conjugation.

Formins are involved in diverse aspects of morphogenesis, and share two regions of homology: FH1 and FH2. We describe a new formin homology region, FH3. FH3 is an amino-terminal domain that differs from the Rho binding site identified in Bni1p and p140mDia. The Schizosaccharomyces pombe formin Fus1 is required for conjugation, and is localized to the projection tip in cells of mating pairs. We replaced genomic fus1+ with green fluorescent protein (GFP)- tagged versions that lacked either the FH1, FH2, or FH3 domain. Deletion of any FH domain essentially abolished mating. FH3, but neither FH1 nor FH2, was required for Fus1 localization. An FH3 domain-GFP fusion protein localized to the projection tips of mating pairs. Thus, the FH3 domain alone can direct protein localization. The FH3 domains of both Fus1 and the S. pombe cytokinesis formin Cdc12 were able to localize GFP to the spindle pole body in half of the late G2 cells in a vegetatively growing population. Expression of both FH3-GFP fusions also affected cytokinesis. Overexpression of the spindle pole body component Sad1 altered the distribution of both Sad1 and the FH3-GFP domain. Together these data suggest that proteins at multiple sites can interact with FH3 domains.

Actins↗

F-actin distribution and function during sexual differentiation in Schizosaccharomyces pombe.

Sexual differentiation in Schizosaccharomyces pombe is induced from the G1 phase of the cell cycle by nitrogen starvation and the presence of mating pheromones. We describe the distribution of F-actin during sexual differentiation. Cortical F-actin dots have previously been shown to be restricted to one end of the rod shaped cell during the G1 phase of the cell cycle. Within half an hour of nitrogen starvation the distribution of cortical F-actin dots switched from being monopolar to bipolar. This was then reversed as the F-actin cytoskeleton repolarized so that cortical F-actin dots accumulated towards the projection tip at one end of the cell. Following cell fusion, F-actin dots were randomly scattered during the horsetail movement that precedes meiosis I and remained scattered until prometaphase or metaphase of meiosis II, when they concentrated around the nucleus. F-actin was seen on the lagging face of the nuclei which faced the partner nucleus during anaphase B of meiosis II. Early on in this anaphase F-actin was also seen on the opposite side of the nucleus, near the spindle pole body. F-actin accumulated within the spores in the mature ascus. Treatment with the actin depolymerising drug Latrunculin A showed that F-actin is required for cell fusion and spore formation. Latrunculin A treatment extended all stages from karyogamy to meiosis I. The S. pombe homologue of the actin binding protein profilin, Cdc3, was shown to be required for conjugation. Cdc3 co-localized with the formin related molecule Fus1 at the projection tip. The polarization of F-actin cortical dots to the projection tip was unaffected in the cdc3.124 mutant, but cdc3.124 mutant cells were unable to break down the cell walls between the two cells following agglutination.

Actin Cytoskeleton↗

Mutations in the fission yeast silencing factors clr4+ and rik1+ disrupt the localisation of the chromo domain protein Swi6p and impair centromere function.

Transcriptional silencing is known to occur at centromeres, telomeres and the mating type region in the nucleus of fission yeast, Schizosaccharomyces pombe. Mating-type silencing factors have previously been shown also to affect transcriptional repression within centromeres and to some extent at telomeres. Mutations in the clr4+, rik1+ and swi6+ genes dramatically reduce silencing at certain centromeric regions and cause elevated chromosome loss rates. Recently, Swi6p was found to co-localise with the three silent chromosomal regions. Here the involvement of clr4+, rik1+ and swi6+ in centromere function is investigated in further detail. Fluorescence in situ hybridisation (FISH) was used to show that, as in swi6 mutant cells, centromeres lag on late anaphase spindles in clr4 and rik1 mutant cells. This phenotype is consistent with a role for these three gene products in fission yeast centromere function. The Swi6 protein was found to be delocalised from all three silent chromosomal regions, and dispersed within the nucleus, in both clr4 and rik1 mutant cells. The phenotypic similarity observed in all three mutants is consistent with the products of both the clr4+ and rik1+ genes being required to recruit Swi6p to the centromere and other silent regions. Mutations in clr4, rik1 and swi6 also result in elevated sensitivity to reagents which destabilise microtubules and show a synergistic interaction with a mutation in the beta-tubulin gene (nda3). These observations suggest that clr4+ and rik1+ must play a role in the assembly of Swi6p into a transcriptionally silent, inaccessible chromatin structure at fission yeast centromeres which is required to facilitate interactions with spindle microtubules and to ensure normal chromosome segregation.

Anaphase↗

Characterization of fus1 of Schizosaccharomyces pombe: a developmentally controlled function needed for conjugation.

In Schizosaccharomyces pombe, the fus1 mutation blocks conjugation at a point after cell contact and agglutination. The cell walls separating the mating partners are not degraded, which prevents cytoplasmic fusion. In order to investigate the molecular mechanism of conjugation, we cloned the fus1 gene and found that it is capable of encoding a 1,372-amino-acid protein with no significant similarities to other known proteins. Expression of the fus1 gene is regulated by the developmental state of the cells. Transcription is induced by nitrogen starvation and requires a pheromone signal in both P and M cell types. Consequently, mutants defective in the pheromone response pathway fail to induce fus1 expression. The ste11 gene, which encodes a transcription factor controlling expression of many genes involved in sexual differentiation, is also required for transcription of fus1. Furthermore, deletion of two potential Ste11 recognition sites in the fus1 promoter region abolished transcription, and expression could be restored when we inserted a different Ste11 site from the mat1-P promoter. Since this element was inverted relative to the fus1 element, we conclude that activation of transcription by Ste11 is independent of orientation. Although the fus1 mutant has a phenotype very similar to that of Saccharomyces cerevisiae fus1 mutants, the two proteins appear to have different roles in the process of cell fusion. Budding yeast Fus1 is a typical membrane protein and contains an SH3 domain. Fission yeast Fus1 has no features of a membrane protein, yet it appears to localize to the projection tip. A characteristic proline-rich potential SH3 binding site may mediate interaction with other proteins.

Amino Acid Sequence↗

Two-step activation of meiosis by the mat1 locus in Schizosaccharomyces pombe.

The mat1 locus is a key regulator of both conjugation and meiosis in the fission yeast Schizosaccharomyces pombe. Two alternative DNA segments of this locus, mat1-P and mat1-M, specify the haploid cell types (Plus and Minus). Each segment includes two genes: mat1-P includes mat1-Pc and mat1-Pm, while mat1-M includes mat1-Mc and mat1-Mm. The mat1-Pc and mat1-Mc genes are responsible for establishing the pheromone communication system that mediates conjugation between P and M cells, while all four mat1 genes are required for meiosis in diploid P/M cells. Our understanding of the initiation of meiosis is based largely on indirect observations, and a more precise investigation of these events was required to define the interaction between the mat1 genes. Here we resolve this issue using synthetic pheromones and P/M strains with mutations in either mat1-Pc or mat1-Mc. Our results suggest a model in which the mat1 locus plays two roles in controlling meiosis. In the first instance, the mat1-Pc and mat1-Mc functions are required to produce the mating pheromones and receptors that allow the generation of a pheromone signal. This signal is required to induce the expression of mat1-Pm and mat1-Mm. This appears to be the major pheromone-dependent step in controlling meiosis since ectopic expression of these genes allows meiosis in the absence of mat1-Pc and mat1-Mc. The mat1-Pm and mat1-Mm products complete the initiation of meiosis by activating transcription of the mei3 gene.

Base Sequence↗

Assessment of pheromone production and response in fission yeast by a halo test of induced sporulation.

We describe a rapid, sensitive and semi-quantitative plate assay for monitoring pheromone activity in the fission yeast Schizosaccharomyces pombe. It is based on the observation that meiosis requires stimulation by pheromone and exploits diploid strains that will only sporulate after addition of exogenous pheromone. The tester strains are heterozygous for mating type, are non-switching, and are mutated in one of the early subfunctions (either mat1-Mc or mat1-Pc), so that meiosis is only induced after exposure to exogenous pheromone (M-factor or P-factor, respectively). Pheromone activity is assessed as an iodine-positive halo of sporulation surrounding the pheromone source, and the width of the halo is related to the amount of pheromone being produced. The assay is sufficiently sensitive to monitor the low amount of M-factor produced by an M mam1 strain, and its sensitivity towards P-factor is greatly increased by using a hyper-sensitive tester strain lacking the Sxa2 protease that is believed to degrade this pheromone. We also demonstrate that the production of P-factor is very much stimulated by exposure of P cells to M-factor.

Pheromones↗

Mapping of additional markers in fission yeast, especially fus1 and three mfm genes.

The following genes of the fission yeast Schizosaccharomyces pombe have been mapped by tetrad analysis--chromosome arm I-L: mfm2, rad24, rad25; I-R: abc1, fus1, mfm1; II-L: mfm3; II-R: mam1, rad13. A hot-spot of meiotic recombination although not quite so active as suggested by previous maps, may be located between rad25 and aro5 on I-L.

Chromosome Mapping↗

The smt-0 mutation which abolishes mating-type switching in fission yeast is a deletion.

Mating-type switching in the fission yeast, S. pombe, is initiated by a DNA double-strand break (DSB) between the mat1 cassette and the H1 homology box. The mat1-cis-acting mutant, smt-0, abolishes mating-type switching and is shown here to be a 263-bp deletion. This deletion starts in the middle of the H1 homology box, 31 bp from the site of the DSB, and extends into the flanking region distal to mat1. The sequence of the region distal to H1 in the wild-type is also presented. In this region we observe a bias in the distribution of purine residues between the two DNA strands.

Base Sequence↗

The ras1 function of Schizosaccharomyces pombe mediates pheromone-induced transcription.

Loss of ras1+ function renders fission yeast cells unable to undergo morphological changes in response to mating pheromones, whereas cells carrying activated mutations in ras1 are hyper-responsive. This has led to the suggestion that the ras1 gene product plays a role in mating pheromone signal transduction. Using partially purified M factor we demonstrate that the mat1-Pm gene, which controls entry into meiosis, is transcribed in response to a pheromone signal. Strains mutated in the ras1 gene or in ste6, the fission yeast homologue of Ras protein GDP/GTP exchange factor, are unable to induce transcription of mat1-Pm in response to M factor. Furthermore, an activated ras1val17 mutant exhibits a stronger induction of the mat1-Pm transcript. However, transcription still depends on nitrogen deprivation as well as on the presence of pheromone, showing that activation of the Ras1 protein alone does not substitute for any of these signals. The pat1-114 mutant bypasses the ras1/ste6 checkpoint, suggesting that activation of ras1 contributes to inactivation of the pat1 protein kinase.

Blotting, Northern↗

Functional conservation between Schizosaccharomyces pombe ste8 and Saccharomyces cerevisiae STE11 protein kinases in yeast signal transduction.

In fission yeast (Schizosaccharomyces pombe), the mat1-Pm gene, which is required for entry into meiosis, is expressed in response to a pheromone signal. Cells carrying a mutation in the ste8 gene are unable to induce transcription of mat1-Pm in response to pheromone, suggesting that the ste8 gene product functions in the signal transduction pathway. The ste8+ gene encodes a 659 amino acid putative protein kinase, which is identical to the previously identified byr2 suppressor of the ras1 defect. Furthermore, ste8+ is highly homologous to the Saccharomyces cerevisiae STE11 gene, which functions in signal transduction in budding yeast. Expression of the S. cerevisiae STE11 gene in S. pombe ste8 mutants restores the ability to transcribe mat1-Pm in response to pheromone. Also, such cells become capable of conjugation and sporulation. When mat1-Pm is artifically expressed from a heterologous promoter, ste8 mutant cells will enter meiosis. This demonstrates that the meiotic defect of ste8 mutants is due to the absence of the mat1-Pm gene product.

Amino Acid Sequence↗

New vectors in fission yeast: application for cloning the his2 gene.

We describe a new Escherichia coli vector (pON5) that allows positive selection for recombinant clones. In this plasmid, the bla gene from pBR322 is permanently active, whereas the neo gene from transposon Tn5 is repressed by the cI-encoded lambda repressor. When DNA is inserted into the Bc/I or HindIII restriction sites situated within the cI gene, the neo gene becomes transcribed from the lambda pR promoter. We have also made a Schizosaccharomyces pombe derivative of pON5 (= pON163) by introducing the fission yeast ars1 and ura4+ sequences. We show that this plasmid is capable of transforming Sc. pombe ura4 strains, as well as ura 3 strains of the distantly related budding yeast Saccharomyces cerevisiae. We have used pON163 for the construction of two fission yeast genomic libraries. From these gene banks clones were isolated that were able to complement fission yeast his2 mutants. Such plasmids could also rescue his4C mutants of Sa. cerevisiae, defective in the histidinol dehydrogenase activity of the multifunctional HIS4 gene product. Finally, we describe the plasmid pDW232 which is useful for functional analysis of fission yeast genes. It is a pGEM3 derivative adapted to fission yeast, carrying multiple cloning sites between the T7 and SP6 promoters, together with ars1 and ura4+ from Sc. pombe.

Cloning, Molecular↗

Pheromone production and response in sterile mutants of fission yeast.

Genetically heterothallic strains of various sterile mutants were assayed for residual production of the corresponding mating pheromone as well as responsiveness towards the opposite pheromone. No sexual activities were detected in ste11 strains (previously referred to as aff1 or steX, which we show are allelic), whilst the production of M factor was unaffected by ste1 to ste10 mutations. P factor production was still possible in class I ste mutants (ste5, ste6 and ste10), which also allow meiosis in diploid strains. With the exception of the leaky ste10-F23 mutant, no changes in cell morphology were induced by exposure to the opposite pheromone in the ste mutant strains.

Alleles↗

The pat1 protein kinase controls transcription of the mating-type genes in fission yeast.

The developmental programme of fission yeast brings about a transition from mitotic cell division to the dormant state of ascospores. In response to nitrogen starvation, two cells of opposite mating type conjugate to form a diploid zygote, which then undergoes meiosis and sporulation. This differentiation process is characterized by a transcriptional induction of the mating-type genes. Conjugation can also be induced in pat1-ts mutants by a shift to a semi-permissive temperature. The pat1 gene encodes a protein kinase, which also functions further downstream in the developmental pathway controlling entry into meiosis. We have analysed transcriptional induction of mating-type genes in various strains--with and without a pat1-ts allele. In wild-type cells of P-mating type derepression occurs in two rounds. First, the mat1-Pc gene is induced in response to nitrogen starvation. Mutants in the map1 gene are defective in this process. In the following step the mat1-Pm gene is expressed in response to a pheromone signal generated by cells of M mating type. Both these controls are derepressed in the pat1-ts mutant at semipermissive temperature. Previous work has established that expression of the mating-type genes in the zygote leads to complete loss of pat1 protein kinase activity causing entry into meiosis. Thus, pat1 can promote its own inactivation. We suggest a model according to which a stepwise inactivation of pat1 leads to sequential derepression of the processes of conjugation and meiosis.

Conjugation, Genetic↗

Choreoathetosis after deep hypothermia without circulatory arrest.

In 8 of 758 patients undergoing an intracardiac operation under cardiopulmonary bypass and hypothermia, choreoathetosis developed 3 to 7 days postoperatively. Before the onset of choreoathetosis, varying degrees of neurological dysfunction were noted. Electroencephalography and neuroimaging failed to detect any responsible functional or structural changes. Six patients are alive 1 to 3 years postoperatively, and their condition is improving. Two patients died of aspiration or sepsis. All patients were grouped based on factors identified as being possibly causative: depth of hypothermia, cooling time, flow rate, and repeated hypothermia. The incidence of choreoathetosis was significantly different in group A (rectal temperature greater than 25 degrees C) compared with group B (rectal temperature less than or equal to 25 degrees C) (0/295 versus 8/463; p = 0.02). Based on cooling time, the incidence of choreoathetosis was significantly different in group B1 (cooling time less than 1 hour) compared with group B2 (cooling time greater than or equal to 1 hour) (1/220 versus 7/243; p = 0.05). Based on flow rate during cooling, group B2 was further divided into the low-flow group (less than 1,500 mL.min-1.m-2) and the high-flow group (greater than or equal to 1,500 mL.min-1.m-2). Although not significant, the incidence of choreoathetosis was higher in the high-flow group (6/153 versus 1/90; p = 0.22). In group B patients having reoperation, the incidence of choreoathetosis was higher than in patients operated on for the first time (5/54 versus 3/409; p less than or equal to 0.0001).(ABSTRACT TRUNCATED AT 250 WORDS)

Athetosis↗