Search PubMed⌕ Search

Biomedical subjects

R Craigie

Publications and source records attributed to R Craigie.

At least 37 records · Page 2Linked to original sources
PubMed1997

Solution structure of the N-terminal zinc binding domain of HIV-1 integrase.

The solution structure of the N-terminal zinc binding domain (residues 1-55; IN1-55) of HIV-1 integrase has been solved by NMR spectroscopy. IN1-55 is dimeric, and each monomer comprises four helices with the zinc tetrahedrally coordinated to His 12, His 16, Cys 40 and Cys 43. IN1-55 exists in two interconverting conformational states that differ with regard to the coordination of the two histidine side chains to zinc. The different histidine arrangements are associated with large conformational differences in the polypeptide backbone (residues 9-18) around the coordinating histidines. The dimer interface is predominantly hydrophobic and is formed by the packing of the N-terminal end of helix 1, and helices 3 and 4. The monomer fold is remarkably similar to that of a number of helical DNA binding proteins containing a helix-turn-helix (HTH) motif with helices 2 and 3 of IN1-55 corresponding to the HTH motif. In contrast to the DNA binding proteins where the second helix of the HTH motif is employed for DNA recognition, IN1-55 uses this helix for dimerization.

Bacterial Proteins↗
PubMed1997

Heterogeneity in recombinant HIV-1 integrase corrected by site-directed mutagenesis: the identification and elimination of a protease cleavage site.

Purified recombinant human immunodeficiency virus type 1 (HIV-1) integrase and certain deletion mutants exhibit heterogeneity consistent with proteolysis at a site close to the C-terminus. Electrospray ionization mass spectrometric analysis indicated that proteolytic cleavage generated a protein missing five residues from the C-terminus. PCR mutagenesis of amino acids on either side of the cleavage site identified two changes which were subsequently shown to prevent clipping when proteins were expressed and purified from Escherichia coli: the substitution of Arg284, the residue on the C-terminal side of the cleavage site, by either glycine or lysine. The introduction of either of these mutations into full-length integrase did not affect in vitro 3' processing or strand transfer activities. Thus, the incorporation of either of these mutations is likely to be beneficial when homogeneity of HIV-1 integrase is a concern, as in crystallographic or nuclear magnetic resonance spectroscopic experiments.

Binding Sites↗
PubMed1996

Zinc folds the N-terminal domain of HIV-1 integrase, promotes multimerization, and enhances catalytic activity.

The N-terminal domain of HIV-1 integrase contains a pair of His and Cys residues (the HHCC motif) that are conserved among retroviral integrases. Although His and Cys residues are often involved in binding zinc, the HHCC motif does not correspond to any recognized class of zinc binding domain. We have investigated the binding of zinc to HIV-1 integrase protein and find that it binds zinc with a stoichiometry of one zinc per integrase monomer. Analysis of zinc binding to deletion derivatives of integrase locates the binding site to the N-terminal domain. Integrase with a mutation in the HHCC motif does not bind zinc, consistent with coordination of zinc by these residues. The isolated N-terminal domain is disordered in the absence of zinc but, in the presence of zinc, it adopts a secondary structure with a high alpha helical content. Integrase bound by zinc tetramerizes more readily than the apoenzyme and is also more active than the apoenzyme in in vitro integration assays. We conclude that binding of zinc to the HHCC motif stabilizes the folded state of the N-terminal domain of integrase and bound zinc is required for optimal enzymatic activity.

Amino Acid Sequence↗
PubMed1996

A soluble active mutant of HIV-1 integrase: involvement of both the core and carboxyl-terminal domains in multimerization.

Structural studies of human immunodeficiency virus type 1 (HIV-1) integrase have been impeded by the low solubility of the protein. By systematic replacement of hydrophobic residues, we previously identified a single amino acid change (F185K) that dramatically improved the solubility of the catalytic domain of HIV-1 integrase and enabled the structure to be determined by x-ray crystallography. We have introduced the same mutation into full-length HIV-1 integrase. The resulting recombinant protein is soluble and fully active in vitro, whereas, HIV-1 carrying the mutation is replication-defective due to improper virus assembly. Analysis of the recombinant protein by gel filtration and sedimentation equilibrium demonstrate a dimer-tetramer self-association. We find that the regions involved in multimerization map to both the catalytic core and carboxyl-terminal domains. The dramatically improved solubility of this protein make it a good candidate for structural studies.

Amino Acid Sequence↗
PubMed1996

Retroviral integrases and their cousins.

The recently determined structures of the catalytic domains of HIV integrase, avian sarcoma virus integrase and the Mu transposase are strikingly similar to each other and also exhibit significant similarity to several nucleases. All these enzymes of cut polynucleotides, leaving 3'OH and 5'PO4 groups. The integrase and transposase also possess a strand-transfer activity that splices DNA. The structural similarities among members of this superfamily of polynucleotidyl transferases suggest that they share a similar mechanism of catalysis.

Bacterial Proteins↗
PubMed1995

Solution structure of the DNA binding domain of HIV-1 integrase.

The solution structure of the DNA binding domain of HIV-1 integrase (residues 220-270) has been determined by multidimensional NMR spectroscopy. The protein is a dimer in solution, and each subunit is composed of a five-stranded beta-barrel with a topology very similar to that of the SH3 domain. The dimer is formed by a stacked beta-interface comprising strands 2, 3, and 4, with the two triple-stranded antiparallel beta-sheets, one from each subunit, oriented antiparallel to each other. One surface of the dimer, bounded by the loop between strands beta 1 and beta 2, forms a saddle-shaped groove with dimensions of approximately 24 x 23 x 12 A in cross section. Lys264, which has been shown from mutational data to be involved in DNA binding, protrudes from this surface, implicating the saddle-shaped groove as the potential DNA binding site.

Adaptor Proteins, Signal Transducing↗
PubMed1995

Catalytic domain of human immunodeficiency virus type 1 integrase: identification of a soluble mutant by systematic replacement of hydrophobic residues.

The integrase protein of human immunodeficiency virus type 1 is necessary for the stable integration of the viral genome into host DNA. Integrase catalyzes the 3' processing of the linear viral DNA and the subsequent DNA strand transfer reaction that inserts the viral DNA ends into host DNA. Although full-length integrase is required for 3' processing and DNA strand transfer activities in vitro, the central core domain of integrase is sufficient to catalyze an apparent reversal of the DNA strand transfer reaction, termed disintegration. This catalytic core domain, as well as the full-length integrase, has been refractory to structural studies by x-ray crystallography or NMR because of its low solubility and propensity to aggregate. In an attempt to improve protein solubility, we used site-directed mutagenesis to replace hydrophobic residues within the core domain with either alanine or lysine. The single substitution of lysine for phenylalanine at position 185 resulted in a core domain that was highly soluble, monodisperse in solution, and retained catalytic activity. This amino acid change has enabled the catalytic domain of integrase to be crystallized and the structure has been solved to 2.5-A resolution [Dyda, F., Hickman, A. B., Jenkins, T. M., Engelman, A., Craigie, R. & Davies, D. R. (1994) Science 266, 1981-1986]. Systematic replacement of hydrophobic residues may be a useful strategy to improve the solubility of other proteins to facilitate structural and biochemical studies.

Amino Acid Sequence↗
PubMed1995

Multiple effects of mutations in human immunodeficiency virus type 1 integrase on viral replication.

The integration of a DNA copy of the human immunodeficiency virus type 1 (HIV-1) genome into a chromosome of an infected cell is a pivotal step in virus replication. Integration requires the activity of the virus-encoded integrase, which enters the cell as a component of the virion. Results of numerous mutagenesis studies have identified amino acid residues and protein domains of HIV-1 integrase critical for in vitro activity, but only a few of these mutants have been studied for their effects on HIV replication. We have introduced site-directed changes into an infectious DNA clone of HIV-1 and show that integrase mutations can affect virus replication at a variety of steps. We identified mutations that altered virion morphology, levels of particle-associated integrase and reverse transcriptase, and viral DNA synthesis. One replication-defective mutant virus which had normal morphology and protein composition displayed increased levels of circular viral DNA following infection of a T-cell line. This virus also had a significant titer in a CD4-positive indicator cell assay, which requires the viral Tat protein. Although unintegrated viral DNA can serve as a template for Tat expression in infected indicator cells, this level of expression is insufficient to support a spreading viral infection in CD4-positive lymphocytes.

Base Sequence↗
PubMed1995

Efficient magnesium-dependent human immunodeficiency virus type 1 integrase activity.

The integrase protein from human immunodeficiency virus type 1 (HIV-1) has generally been reported to require Mn2+ for efficient in vitro activity. We have reexamined the divalent metal ion requirements of HIV-1 integrase and find that the protein is capable of promoting efficient 3' processing and DNA strand transfer with either Mn2+ or Mg2+. The metal ion preference depended upon the reaction conditions. HIV-1 integrase displayed significantly less nonspecific nuclease activity in reaction mixtures containing Mg2+ than it did under the previously described reaction conditions with mixtures containing Mn2+.

Base Sequence↗
PubMed1994

Crystal structure of the catalytic domain of HIV-1 integrase: similarity to other polynucleotidyl transferases.

HIV integrase is the enzyme responsible for inserting the viral DNA into the host chromosome; it is essential for HIV replication. The crystal structure of the catalytically active core domain (residues 50 to 212) of HIV-1 integrase was determined at 2.5 A resolution. The central feature of the structure is a five-stranded beta sheet flanked by helical regions. The overall topology reveals that this domain of integrase belongs to a superfamily of polynucleotidyl transferases that includes ribonuclease H and the Holliday junction resolvase RuvC. The active site region is identified by the position of two of the conserved carboxylate residues essential for catalysis, which are located at similar positions in ribonuclease H. In the crystal, two molecules form a dimer with a extensive solvent-inaccessible interface of 1300 A2 per monomer.

Amino Acid Sequence↗
PubMed1994

Biophysical and enzymatic properties of the catalytic domain of HIV-1 integrase.

A deletion derivative of the integrase protein from human immunodeficiency virus type-1 (HIV-1) consisting of the central core domain (amino acids 50-212) has been characterized biophysically and biochemically. This deletion mutant is of particular interest for structural studies as it can carry out the disintegration reaction suggesting the presence of an active site and, under certain conditions, is more soluble than full-length integrase. The circular dichroism and fluorescence of the deletion mutant and the 288-residue full-length integrase were similar, indicating that the core residues maintain similar overall conformations in both proteins. The deletion mutant is approximately 10% more alpha-helical than the full-length protein. Analytical centrifugation demonstrated that both proteins undergo monomer-dimer association although the truncated protein showed slightly less tendency to dimerize; the dissociation constants were 2.5 x 10(-5) M for the full-length protein and 8.0 x 10(-5) M for the truncated protein. The disintegration activity of both proteins was also compared. Although a higher concentration of the truncation mutant was required for optimal activity, the mutant did not have altered pH or Mn2+ requirements relative to the full-length protein. The combined biophysical and enzymatic studies suggest that this truncated form of HIV-1 integrase is likely to be useful for structural studies.

Amino Acid Sequence↗
PubMed1994

Protection of retroviral DNA from autointegration: involvement of a cellular factor.

An essential step in the retrovirus life cycle is integration of a DNA copy of the viral genome into a host chromosome. After reverse transcription, there can be a delay of many hours before the viral DNA is integrated. It is important for the retrovirus to ensure that the viral DNA does not integrate into itself during this period; such autointegration is a suicidal process that would result in destruction of the viral genome. Understanding of the mechanism that blocks autointegration of the viral DNA may lead to insights into how to inhibit viral replication by inducing the viral DNA to autointegrate. Evidence is presented in this report that viral nucleoprotein complexes isolated from cells infected with Moloney murine leukemia virus exhibit a barrier to autointegration. The barrier can be disrupted by high salt treatment and, subsequently, restored by addition of factors provided by a host cell extract. Our data indicate an involvement of host machinery in protecting retroviral DNA from autointegration.

3T3 Cells↗
PubMed1994

Intermolecular disintegration and intramolecular strand transfer activities of wild-type and mutant HIV-1 integrase.

We report the activities of HIV integrase protein on a novel DNA substrate, consisting of a pair of gapped duplex molecules. Integrase catalyzed an intermolecular disintegration reaction that requires positioning of a pair of the gapped duplexes in a configuration that resembles the intgration intermediate. However, the major reaction resulted from an intramolecular reaction involving a single gapped duplex, giving rise to a hairpin. Surprisingly, a deletion mutant of integrase that lacks both the amino and carboxyl terminal regions still catalyzed the intermolecular disintegration reaction, but supported only a very low level of the intramolecular reaction. The central core region of integrase is therefore sufficient to both bind the gapped duplex DNA and juxtapose a pair of such molecules through protein-protein interactions. We suggest that the branched DNA structures of the previously reported disintegration substrate, and the intermolecular disintegration substrate described here, assist in stabilizing protein-protein interactions that otherwise require the amino and carboxy terminal regions of integrase.

Base Sequence↗
PubMed1994

Molecular cloning and characterization of outer membrane protein E of Moraxella (Branhamella) catarrhalis.

Outer membrane protein E (OMP E) is a 50-kDa protein of Moraxella (Branhamella) catarrhalis. It is a potential vaccine antigen because it is expressed on the surface of the bacterium and has antigenic determinants which are conserved among most strains of M. catarrhalis. To clone the gene encoding OMP E, an EMBL-3 genomic library of strain 25240 was screened with a family of degenerate oligonucleotides based on the amino-terminal protein sequence. The OMP E gene was identified in one of the six positive clones by Southern blot analysis. An open reading frame of 1,377 bp encoding a protein of 460 amino acids was identified. The calculated molecular mass of the mature protein of 436 amino acid residues was 47.03 kDa, which correlated well with the results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The protein product of the OMP E gene had a leader peptide of 25 amino acids and a signal peptidase 1 cleavage site similar to those of known OMPs of Escherichia coli. The transcription initiation site of the OMP E gene was mapped by primer extension to be 78 nucleotides upstream of the ATG start codon. Borderline homology was found to the FadL protein of E. coli (49.1% similarity and 25.6% identity), which is involved in the binding and transport of fatty acids. Analysis of restriction fragment length polymorphisms of the OMP E genes of 19 different strains of M. catarrhalis showed that the OMP E gene is highly conserved. The high degree of conservation of sequences of the OMP E genes of M. catarrhalis from diverse sources, along with earlier observations that the protein contains antigenic determinants on the bacterial surface, indicates that OMP E should be studied further as a potential vaccine antigen.

Amino Acid Sequence↗
PubMed1994

The core and carboxyl-terminal domains of the integrase protein of human immunodeficiency virus type 1 each contribute to nonspecific DNA binding.

The integrase protein of human immunodeficiency virus type 1 removes two nucleotides from the 3' ends of reverse-transcribed human immunodeficiency virus type 1 DNA (3' processing) and covalently inserts the processed ends into a target DNA (DNA strand transfer). Mutant integrase proteins that lack the amino-and/or carboxyl-terminal domains are incapable of catalyzing 3' processing and DNA strand transfer but are competent for an apparent reversal of the DNA strand transfer reaction (disintegration) in vitro. Here, we investigate the binding of integrase to DNA by UV cross-linking. Cross-linked complexes form with a variety of DNA substrates independent of the presence of divalent metal ion. Analysis with amino- and carboxyl-terminal deletion mutant proteins shows that residues 213 to 266 of the 288-residue protein are required for efficient cross-linking in the absence of divalent metal ion. Carboxyl-terminal deletion mutants that lack this region efficiently cross-link only to the branched disintegration DNA substrate, and this reaction is dependent on the presence of metal ion. Both the core and C-terminal domains of integrase therefore contribute to nonspecific DNA binding.

Base Sequence↗
PubMed1993

Domains of the integrase protein of human immunodeficiency virus type 1 responsible for polynucleotidyl transfer and zinc binding.

The integrase protein of human immunodeficiency virus type 1 carries out a set of polynucleotidyl transfer reactions that result in the covalent attachment of the retroviral cDNA to host DNA. We have analyzed the activities of a set of deletion derivatives of the integrase protein. The analysis reveals that a central domain of only 137 amino acids is sufficient in vitro to catalyze a subset of the reactions carried out by the complete protein. This polypeptide contains an amino acid sequence motif, Asp-Xaa39-58-Asp-Xaa35-Glu (DX39-58DX35E, where X and the subscript indicate the intervening amino acids between the invariant acidic residues), that is found in the integrases of retroviruses and retrotransposons and also the transposase proteins of some bacterial transposable elements. We also find that the integrase protein can bind Zn2+, and the histidine and cysteine residues of another conserved motif (HX3-7HX23-32CX2C) are required for efficient Zn2+ binding. The activities displayed by deletion mutants suggest to us possible functions for the various parts of integrase.

Amino Acid Sequence↗