Search PubMed⌕ Search

Biomedical subjects

R Cingolani

Publications and source records attributed to R Cingolani.

At least 19 recordsLinked to original sources

Optical properties of N-succinimidyl bithiophene and the effects of the binding to biomolecules: comparison between coupled-cluster and time-dependent density functional theory calculations and experiments.

We report a joint theoretical-experimental study on the optical properties of 5-N-succinimidyl-2,2'-bithiophene (NS-2T), a prototype system for a new class of biomarkers. Time-dependent density functional theory (TD-DFT) and approximate coupled-cluster single and doubles (CC2) calculations are performed in the ground and excited states. Theoretical results are compared with absorption, photoluminescence (PL), time-resolved PL, and PL quantum efficiency measurements. The excited state of NS-2T has a larger dipole moment as compared to that of the ground state, explaining the experimental shift of the PL peak in solvents of different polarity, and a smaller intersystem crossing (ISC) rate as compared to that of isolated bithiophene (2T), explaining the increased PL quantum efficiency. We also studied two model systems to describe the effects of the covalent binding of NS-2T to biomolecules and proteins with the epsilon-NH(2) lysine groups. These model systems show optical properties closer to 2T, as the PL quantum efficiency is reduced due to the increased ISC rate. Theoretical calculations and experimental results show that covalent binding of NS-2T to a biomolecule will blue-shift the absorption but not the photoluminescence. CC2 and TD-DFT can very well describe the absorption and photoluminescence energies of all three systems, but the presence of several charge-transfer transitions in the TD-DFT spectrum of NS-2T required the use of a correlated method to validate the TD-DFT results.

Chemistry, Physical↗

Charge transport in disordered films of non-redox proteins.

Electrical conduction in solid state disordered multilayers of non-redox proteins is demonstrated by two-terminal transport experiments at the nanoscale and by scanning tunneling microscopy (STM/STS experiments). We also show that the conduction of the biomolecular films can be modulated by means of a gate field. These results may lead to the implementation of protein-based three-terminal nanodevices and open important new perspectives for a wide range of bioelectronic/biosensing applications.

Animals↗

Low-loss and highly polarized emission from planar polymer waveguides.

The waveguiding properties and amplified spontaneous emission (ASE) of a blend of light-emitting gain-conjugated polymers were investigated. ASE-induced line narrowing occurs for excitation fluences larger than 100 microJ cm(-2), with a maximum optical-gain coefficient of 8 cm(-1). Energy transfer between the host and guest polymers, significantly reducing the self-absorption, leads to a loss coefficient of the waveguide as low as 0.3 cm(-1), which is believed to be the lowest value reported for active organic gain slabs and a highly polarized emission, with a polarization contrast up to 0.65. These results indicate that gain-conjugated polymer blends are state-of-the-art organic materials for lasing devices.

Journal Article↗

The role of excitons' quasiequilibrium in the temperature dependence of the poly(9,9-dioctylfluorene) beta phase photoluminescence.

We investigated the temperature dependence of the poly(9,9-dioctylfluorene) beta phase photoluminescence (PL) spectra in spin coated thin films from tetrahydrofuran solutions. As the temperature increases from 18 to 300 K a continuous blueshift of the 0-0 PL peak of about 25 meV and an increase of the peak full width at half maximum (FWHM) of about 49 meV are observed. We show that the PL spectra temperature dependence is not due to a temperature dependent average conjugation length, as often assumed, but instead it can be quantitatively explained in the frame of a thermal quasiequilibrium model for excitons in an inhomogeneously broadened excited states distribution. We demonstrate that the emission blueshift and broadening are mainly due to the increase of the excitons' temperature with the sample one. This effect is partially compensated by an increasing efficiency of the exciton energy migration. The interplay between these two processes quantitatively explains the observed temperature dependence of the PL peak energy and of its FWHM. On the contrary we show that the PL spectra are almost independent of the absorption blueshift with temperature.

Journal Article↗

Study of the surface morphology of a cholesteryl tethering system for lipidic bilayers.

The immobilization of functional molecules embedded in lipidic membranes onto inorganic substrates is of great interest for numerous applications in the fields of biosensors and biomaterials. We report on the preparation and the morphological characterization of a tethering system for lipidic bilayers, which is based on cholesteryl derivatives deposited on hydrophilic surfaces by self-assembling and microcontact printing techniques. The investigation of the structural properties of the realized films by atomic, lateral, and surface potential microscopy allowed us to assess the high quality of the realized cholesteryl layers.

Cholesterol↗

Retention of nativelike conformation by proteins embedded in high external electric fields.

In this Communication, we show that proteins embedded in high external electric fields are capable of retaining a nativelike fold pattern. We have tested the metalloprotein azurin, immobilized onto SiO2 substrates in air with proper electrode configuration, by applying static fields up to 10(6)-10(7) Vm. The effects on the conformational properties of protein molecules have been determined by means of intrinsic fluorescence measurements. Experimental results indicate that no significant field-induced conformational alteration occurs. Such results are also discussed and supported by theoretical predictions of the inner protein fields.

Journal Article↗

Theoretical study of singlet and triplet excitation energies in oligothiophenes.

We have analyzed singlet and triplet excitation energies in oligothiophenes (up to five rings) using time-dependent density-functional theory (TD-DFT) with different exchange-correlation functionals and compared them with results from the approximate coupled-cluster singles and doubles model (CC2) and experimental data. The excitation energies have been calculated in geometries obtained by TD-DFT optimization of the lowest excited singlet state and in the ground-state geometries of the neutral and anionic systems. TD-DFT methods underestimate photoluminescence energies but the energy difference between singlet and triplet states shows trends with the chain-length similar to CC2. We find that the second triplet excited state is below the first singlet excited state for long oligomers in contrast with the previous assignment of Rentsch et al. (Phys.Chem. Chem. Phys. 1999, 1, 1707). Their photodetachment photoelectron spectroscopy measurements are better described by considering higher triplet excited states.

Journal Article↗

Nonradiative relaxation in thiophene-S,S-dioxide derivatives: the role of the environment.

The intramolecular radiative and nonradiative relaxation processes of three thiophene-S,S-dioxide derivatives with different molecular rigidity are investigated in different solutions and in inert matrix. We show that the fluorescence quantum efficiency and the relaxation dynamics are strongly dependent on the environment viscosity, whereas they are almost independent of the environment polarity. We demonstrate that this strong dependence is due to an environment dependent nonradiative decay rate, whereas no relevant variations of the radiative decay rate are observed. We demonstrate that the dipole coupling with the solvent does not provide an efficient nonradiative decay channel and that the S(n) - S(1) vibrational relaxation is very efficient in all of the molecules and for all of the investigated environments. Moreover first-principles time-dependent density-functional theory calculations in the correct, i.e., excited-state, molecular conformation, suggest that significant contributions of intersystem crossing to the triplet manifold can be excluded. We then conclude that the main nonradiative process determining the fluorescence quantum efficiency of this class of molecules is S(1) - S(0) internal conversion (IC). An explanation for the IC rate dependence in terms of the environment viscosity, molecular rigidity, S(1) - S(0) energy-gap, and molecular volume is presented.

Journal Article↗

Solid state protein monolayers: morphological, conformational, and functional properties.

We have studied the morphological, conformational, and electron-transfer (ET) function of the metalloprotein azurin in the solid state, by a combination of physical investigation methods, namely atomic force microscopy, intrinsic fluorescence spectroscopy, and scanning tunneling microscopy. We demonstrate that a "solid state protein film" maintains its nativelike conformation and ET function, even after removal of the aqueous solvent.

Adsorption↗

Formation and characterization of glutamate dehydrogenase monolayers on silicon supports.

In this paper we have tested two different procedures (the "three-step" and the "four-step" procedures) for the covalent immobilization of glutamate dehydrogenase (GDH) onto silicon supports. Atomic force microscopy (AFM), Fourier-transform infrared spectroscopy (FT-IR), fluorescence spectroscopy and an enzymatic assay were used to probe the structure and activity of the immobilized enzyme. Our results demonstrate that coupling through the "three-step" procedure does not significantly affect either the fold pattern or the activity of the enzyme, suggesting that this method could be ideally suited to the development of high quality monolayers for use in enzyme-based planar biosensors.

Biosensing Techniques↗

The effects of oxygenation on the optical properties of dimethyl-dithienothiophenes: comparison between experiments and first-principles calculations.

Modifications of the optical properties of dimethyl-dithienothiophenes due to the oxygen functionalization of the central sulfur atom are investigated. We have measured the absorption, photoluminescence (PL) and PL excitation spectra, the PL quantum efficiencies, and the PL decay times. These experimental results are interpreted and compared with first-principles time-dependent density-functional theory calculations, which predict, for the considered systems, excitation and emission energies with an accuracy of 0.1 eV. It is found that the oxygenation strongly changes optical and photophysical properties. These effects are related to the modifications of the energetically lowest-unoccupied molecular orbital and the energetically second highest occupied one, which change the relative position of the two lowest singlet and triplet excited states.

Journal Article↗

Structural stability study of protein monolayers in air.

The assessment of the folding and of the structural stability of a protein in air, upon immobilization in the solid state, represents a critical point from both a fundamental point of view and for the development of solid state nanobioelectronics. The recent demonstrations by Rinaldi et al. [R. Rinaldi et al., Adv. Mater. 14, 1453 (2002); Appl. Phys. Lett. 82, 472 (2003); Ann. (N.Y.) Acad. Sci. 1006, 187 (2003)] of protein-based solid state devices and transistors working in air have raised an intriguing question about the behavior of a biomolecule under nonphysiological conditions. The operation principle of the realized devices is based on the physiological electron transfer function of the metalloprotein azurin. This means that azurin should retain its shape and functionality also in the solid state when utilized in air and at room temperature. In this Brief Report, we prove this claim by analyzing the conformational state of the azurin monolayers developed for such devices by means of intrinsic fluorescence spectroscopy. We show that the immobilization of azurins in the solid state under nonliquid conditions, by means of a specific chemisorption process, does not necessarily lead to protein denaturation. This result is of great importance because it opens up interesting perspectives for the development of solid state hybrid nanodevices for electronic applications requiring nonliquid environments.

Adsorption↗

Self-assembling of proteins and enzymes at nanoscale for biodevice applications.

Different nanotechnological strategies have been selected to implement biomolecular devices following a bottom-up or top-down approach depending on the biomolecule and on its functionality. Biomolecules have particular functionality and self-assembling capabilities that can be exploited for the implementation of both bioelectronic devices and multipurpose engineered biosurfaces. Surface preparation with supramolecular methods and microcontact printing have been developed and optimised to realise suitable functionalised surfaces. These surfaces can be used to link metalloproteins and enzymes for the implementation of nanobioelectronic devices and planar biosensors or to bind cells in order to promote their growth along predefined tracks and grooves. Some possible applications of these biosurfaces are shown and discussed. Results are presented for the realisation of a biomolecular nanodevice working in air based on the metalloprotein azurin immobilised in the solid state, the formation and characterisation of functional glutamate Dehydrogenase monolayers for nanobiosensing applications, the results of soft lithography processes on azurin for biosensor implementation, and the development of physiological self-assembled patterns of laminin-1 for cell culture applications and hybrid devices.

Journal Article↗

Ambipolar transistors based on azurin proteins.

A new type of transistor is presented. It is realised by using a metalloprotein; namely, azurin. Thanks to their natural functional characteristics, which involve inter- and intramolecular electron transfer, metalloproteins are good candidates for biomolecular nanoelectronics. The implementation of a prototype of protein transistor operating in air and in the solid state based on self-organised films of azurins is reported. Experimental current-voltage characteristics are shown. The new device presents an ambipolar behaviour as the gate bias voltage is changed. Exploiting this peculiar characteristic, a fully integrated logic gate which can be a good starting point for a new class of nanoelectronics devices has been realised.

Journal Article↗

Intrinsic fluorescence spectroscopy of glutamate dehydrogenase: Integrated behavior and deconvolution analysis.

In this paper, we present a deconvolution method aimed at spectrally resolving the broad fluorescence spectra of proteins, namely, of the enzyme bovine liver glutamate dehydrogenase (GDH). The analytical procedure is based on the deconvolution of the emission spectra into three distinct Gaussian fluorescing bands G(j). The relative changes of the G(j) parameters are directly related to the conformational changes of the enzyme, and provide interesting information about the fluorescence dynamics of the individual emitting contributions. Our deconvolution method results in an excellent fitting of all the spectra obtained with GDH in a number of experimental conditions (various conformational states of the protein) and describes very well the dynamics of a variety of phenomena, such as the dependence of hexamers association on protein concentration, the dynamics of thermal denaturation, and the interaction process between the enzyme and external quenchers. The investigation was carried out by means of different optical experiments, i.e., native enzyme fluorescence, thermal-induced unfolding, and fluorescence quenching studies, utilizing both the analysis of the "average" behavior of the enzyme and the proposed deconvolution approach.

Animals↗

Optical characterization of glutamate dehydrogenase monolayers chemisorbed on SiO2.

This paper describes the formation of glutamate dehydrogenase monolayers on silicon dioxide, and their characterization by means of physical techniques, i.e., fluorescence spectroscopy and Fourier-transform infrared spectroscopy. Detailed investigations of the intrinsic stability of native proteins in solution were carried out to elucidate the occurrence of conformational changes induced by the immobilization procedure. The enzyme monolayers were deposited on SiO2 after preexposing silicon surfaces to 3-aminopropyltriethoxysilane and reacting the silylated surfaces with glutaric dialdehyde. The optical characterization demonstrates that the immobilization does not interfere with the fold pattern of the native enzyme. In addition, fluorescence spectroscopy, thermal denaturation, and quenching studies performed on the enzyme in solution well describe the folding and unfolding properties of glutamate dehydrogenase. The photophysical studies reported here are relevant for nanobioelectronics applications requiring protein immobilization on a chip.

Biophysical Phenomena↗

A modeling and convolution method to measure compositional variations in strained alloy quantum dots.

We have developed a method to quantitatively measure the absolute composition of nanometer sized capped quantum dots in semiconductor alloys. The method uses spatially resolved electron energy-loss spectroscopy in a scanning transmission electron microscope to measure compositional profiles across the center of the quantum dot and the adjacent nanometer wide wetting layer. The measurements from the wetting layer are used to derive a spatial broadening function which includes the effects of probe size, instabilities and beam spreading in the sample. This broadening function is employed to simulate compositional profiles from the quantum dots. Information on the dimensions of dots is extracted from annular dark-field images. The method is applied to In(y)Ga(1-y)As (y = 0.5) quantum dots grown on a GaAs substrate. In this system, a simple truncated cone model is found to give an adequate description of the compositional variations across the dot. We find a substantial enrichment in In at the center of the dots, in agreement with theoretical predictions.

Journal Article↗

Oligothiophene isothiocyanates as a new class of fluorescent markers for biopolymers.

The regioselective synthesis of fluorescent oligothiophene isothiocyanates is described. The isothiocyanates were reacted with bovine serum albumin (BSA) following standard procedures and the optical properties of the oligothiophene-BSA conjugates were analyzed as a function of oligomer concentration, time, and irradiation power. The oligothiophene-BSA conjugates were chemically very stable and their photoluminescence characteristics persisted unaltered for several months. Photoluminescence data relative to the conjugate of an oligothiophene-S,S-dioxide isothiocyanate with monoclonal anti-CD8 antibody are reported. No fluorescence quenching was observed following the binding of the isothiocyanate to the antibody and the conjugate displayed high chemical stability and photostability.

Antibodies, Monoclonal↗