Search PubMed⌕ Search

Biomedical subjects

R A Engh

Publications and source records attributed to R A Engh.

At least 37 records · Page 2Linked to original sources

Converting blood coagulation factor IXa into factor Xa: dramatic increase in amidolytic activity identifies important active site determinants.

The coagulation factors IXa (fIXa) and Xa (fXa) share extensive structural and functional homology; both cleave natural substrates effectively only with a cofactor at a phospholipid surface. However, the amidolytic activity of fIXa is 10(4)-fold lower than that of fXa. To identify determinants of this poor reactivity, we expressed variants of truncated fIXa (rf9a) and fXa (rf10a) in Escherichia coli. The crystal structures of fIXa and fXa revealed four characteristic active site components which were subsequently exchanged between rf9a and rf10a. Exchanging Glu219 by Gly or exchanging the 148 loop did not increase activity of rf9a, whereas corresponding mutations abolished reactivity of rf10a. Exchanging Ile213 by Val only moderately increased reactivity of rf9a. Exchanging the 99 loop, however, dramatically increased reactivity. Furthermore, combining all four mutations essentially introduced fXa properties into rf9a: the amidolytic activity was increased 130-fold with fXa substrate selectivity. The results suggest a 2-fold origin of fIXa's poor reactivity. A narrowed S3/S4 subsite disfavours interaction with substrate P3/P4 residues, while a distorted S1 subsite disfavours effective cleavage of the scissile bond. Both defects could be repaired by introducing fXa residues. Such engineered coagulation enzymes will be useful in diagnostics and in the development of therapeutics.

Amidohydrolases↗

Lysine 156 promotes the anomalous proenzyme activity of tPA: X-ray crystal structure of single-chain human tPA.

Tissue type plasminogen activator (tPA) is the physiological initiator of fibrinolysis, activating plasminogen via highly specific proteolysis; plasmin then degrades fibrin with relatively broad specificity. Unlike other chymotrypsin family serine proteinases, tPA is proteolytically active in a single-chain form. This form is also preferred for therapeutic administration of tPA in cases of acute myocardial infarction. The proteolytic cleavage which activates most other chymotrypsin family serine proteinases increases the catalytic efficiency of tPA only 5- to 10-fold. The X-ray crystal structure of the catalytic domain of recombinant human single-chain tPA shows that Lys156 forms a salt bridge with Asp194, promoting an active conformation in the single-chain form. Comparisons with the structures of other serine proteinases that also possess Lys156, such as trypsin, factor Xa and human urokinase plasminogen activator (uPA), identify a set of secondary interactions which are required for Lys156 to fulfil this activating role. These findings help explain the anomalous single-chain activity of tPA and may suggest strategies for design of new therapeutic plasminogen activators.

Amino Acid Chloromethyl Ketones↗

Quail cystatin: isolation and characterisation of a new member of the cystatin family and its hypothetical interaction with cathepsin B.

Quail cystatin, a new cysteine proteinase inhibitor protein of the cystatin superfamily, was purified from egg albumen of Japanese quail Coturnix coturnix japonica. Amino acid sequencing and mass spectrometry revealed the complete 116 amino acid residue primary structure of a phosphorylated form (13,173 Da). The inhibitor has a 90% sequence identity with chicken cystatin. Its interaction with papain is rapid and tight (Ki = 4.4 pM; k(on) = 1.8x10(7) M(-1) s(-1); k(off) = 0.8x10(-4) s(-1)) and very similar to that of chicken cystatin. Surprisingly, however, cathepsin B was inhibited 15-fold more strongly by quail cystatin (Ki = 47 pM; k(on) = 19x10(7) M(-1) s(-1); k(off) = 9x10(-4) s(-1)) than by chicken cystatin (Ki = 784 pM; k(on) = 2.9x10(7) M(-1) s(-1); k(off) = 24x10(-4) s(-1)). Intuitive comparative conformational inspection of related inhibitors and of cognate enzymes suggest that: (i) the 3D structure of quail cystatin is nearly identical to that of chicken cystatin, (ii) quail cystatin can interact with cathepsin B analogous to the stefin B-papain interaction, if the 'occluding loop' of cathepsin B possesses an 'open' conformation, (iii) the greater inhibition of cathepsin B by quail cystatin compared to chicken cystatins probably arises from two additional ionic interactions between residues Arg15 and Lys112 of the inhibitor and Glu194 and Asp124 of the enzyme, respectively. The two potential salt bridges are located outside of the known contact regions between cystatins and peptidases of the papain family.

Amino Acid Sequence↗

X-ray structure of active site-inhibited clotting factor Xa. Implications for drug design and substrate recognition.

The 3.0-A resolution x-ray structure of human des-Gla-coagulation factor Xa (fXa) has been determined in complex with the synthetic inhibitor DX-9065a. The binding geometry is characterized primarily by two interaction sites: the naphthamidine group is fixed in the S1 pocket by a typical salt bridge to Asp-189, while the pyrrolidine ring binds in the unique aryl-binding site (S4) of fXa. Unlike the large majority of inhibitor complexes with serine proteinases, Gly-216 (S3) does not contribute to hydrogen bond formation. In contrast to typical thrombin binding modes, the S2 site of fXa cannot be used by DX-9065a since it is blocked by Tyr-99, and the aryl-binding site (S4) of fXa is lined by carbonyl oxygen atoms that can accommodate positive charges. This has implications for natural substrate recognition as well as for drug design.

Anticoagulants↗

Enzyme flexibility, solvent and 'weak' interactions characterize thrombin-ligand interactions: implications for drug design.

BACKGROUND: The explosive growth in the rate of X-ray determination of protein structures is fuelled largely by the expectation that structural information will be useful for pharmacological and biotechnological applications. For example, there have been intensive efforts to develop orally administrable antithrombotic drugs using information about the crystal structures of blood coagulation factors, including thrombin. Most of the low molecular weight thrombin inhibitors studied so far are based on arginine and benzamidine. We sought to expand the database of information on thrombin-inhibitor binding by studying new classes of inhibitors. RESULTS: We report the structures of three new inhibitors complexed with thrombin, two based on 4-aminopyridine and one based on naphthamidine. We observe several geometry changes in the protein main chain and side chains which accompany inhibitor binding. The two inhibitors based on 4-aminopyridine bind in notably different ways: one forms a water-mediated hydrogen bond to the active site Ser195, the other induces a rotation of the Ser214-Trp215 peptide plane that is unprecedented in thrombin structures. These binding modes also differ in their 'weak' interactions, including CH-O hydrogen bonds and interactions between water molecules and aromatic pi-clouds. Induced-fit structural changes were also seen in the structure of the naphthamidine inhibitor complex. CONCLUSIONS: Protein flexibility and variable water structures are essential elements in protein-ligand interactions. Ligand design strategies that fail to take this into account may overlook or underestimate the potential of lead structures. Further, the significance of 'weak' interactions must be considered both in crystallographic refinement and in analysis of binding mechanisms.

4-Aminopyridine↗

Crystal structures of catalytic subunit of cAMP-dependent protein kinase in complex with isoquinolinesulfonyl protein kinase inhibitors H7, H8, and H89. Structural implications for selectivity.

The discovery of several hundred different protein kinases involved in highly diverse cellular signaling pathways is in stark contrast to the much smaller number of known modulators of cell signaling. Of these, the H series protein kinase inhibitors (1-(5-isoquinolinesulfonyl)-2-methylpiperazine (H7), N-[2-(methylamino)ethyl]-5-isoquinolinesulfonamide (H8) N-[2-(p-Bromocinnamylamino)ethyl]-5-isoquinolinesulfonamide (H89)) are frequently used to block signaling pathways in studies of cellular regulation. To elucidate inhibition mechanisms at atomic resolution and to enable structure-based drug design of potential therapeutic modulators of signaling pathways, we determined the crystal structures of corresponding complexes with the cAPK catalytic subunit. Complexes with H7 and H8 (2.2 A) and with H89 (2.3 A) define the binding mode of the isoquinoline-sulfonamide derivatives in the ATP-binding site while demonstrating effects of ligand-induced structural change. Specific interactions between the enzyme and the inhibitors include the isoquinoline ring nitrogen ligating to backbone amide of Val-123 and an inhibitor side chain amide bonding to the backbone carbonyl of Glu-170. The conservation of the ATP-binding site of protein kinases allows evaluation of factors governing general selectivity of these inhibitors among kinases. These results should assist efforts in the design of protein kinase inhibitors with specific properties.

1-(5-Isoquinolinesulfonyl)-2-Methylpiperazine↗

Syntheses and selective inhibitory activities of terphenyl-bisamidines for serine proteases.

Biphenyl nitriles 5a-c, terphenyl dinitriles 11a-d, and naphthalene-bis(benzonitrile) 11c were prepared by palladium-catalyzed cross coupling reactions and subsequently converted to biphenyl amidines 8a-c and bis(benzamidines) 4a-e. Among the biphenyl amidines 8 only the meta-derivative 8b inhibits factor Xa and trypsin (Ki = 10 microM). The terphenyl bisamidine 4c does not inhibit factor Xa, trypsin, thrombin, and plasmin, while 4a and 4d are almost equipotent inhibitors of these enzymes (Ki 1-6 microM), and 4b and 4e are selective for trypsin (Ki = 0.2 and 0.3 microM; but Ki > 1 microM for factor Xa, thrombin, and plasmin). X-ray analysis of crystals of 4b complexed with bovine trypsin revealed a unique binding mode: one benzamidino group binds in the S1 site to the side chain carboxylate of Arg189. The central phenyl group is twisted away from the S2/S3 sites and the second amidino group contacts the Asn143 side chain.

Amidines↗

Divining the serpin inhibition mechanism: a suicide substrate 'springe'?

The most important of diverse serpin functions is serine-protease inhibition. In contrast to the 'standard-mechanism' inhibitors, inhibitory serpins use a mechanism that involves unusual flexibility, and cofactor and receptor interactions. The principal feature is a refolding step, during which a disordered or helical strand is inserted into the center of a beta sheet. This transition, which is essential for inhibition, can be induced by heating, proteolytic cleavage of the serpin, or complexation with the proteinase target; analogous transitions can be induced by peptide complexation or aggregation. Although it is difficult to determine the details of this mechanism, information derived from crystal structures and other experiments has stimulated drug design efforts with wide-ranging potential applications.

Crystallography, X-Ray↗

Structure of leech derived tryptase inhibitor (LDTI-C) in solution.

The three-dimensional solution structure of the leech derived tryptase inhibitor form C (LDTI-C), an inhibitor of 46 amino acids which contains 3 disulfide bridges, has been determined using 2D NMR spectroscopy. The 3D structure was determined on the basis of 262 interresidue interproton distance constraints derived from nuclear Overhauser enhancement measurements and 25 phi angles, supplemented by 3 psi and 15 chi 1 angles. The core of LDTI-C is very well defined and consists of a short 3(10)-helix-loop and a short two-stranded antiparallel beta-sheet between residues 13-14 and 20-21. The N-terminus is fixed to the core by two disulfide bridges, while the C-terminus is connected to the beta-sheet via the third disulfide bridge. The binding loop in LDTI exhibits lowest energy conformations belonging to the canonical conformation of serine proteinase inhibitors.

Amino Acid Sequence↗

Production, inhibitory activity, folding and conformational analysis of an N-terminal and an internal deletion variant of chicken cystatin.

Two deletion variants of chicken cystatin were produced after cassette mutagenesis of the recombinant Arg-Glu-Phe-[Met1, Ile29, Leu89]-chicken egg white cystatin gene in Escherichia coli. The variant des-Ser1-Pro11-[Ala12, Glu13, Phe14, Met15, Ile29, Leu89]-chicken cystatin (N-del 2) and the variant Arg-Glu-Phe-[Met1, Ile29]-des-Cys71-Met89-chicken cystatin (del-helix II) were purified and characterized by inhibition kinetics, far-ultraviolet-CD and fluorescence spectroscopy, and their folding in guanidine hydrochloride (Gdn/HCl) was studied. The del-helix II variant, shortened by 19 amino acids, is a basic, stefin-like mini-cystatin with one disulfide bridge. Its inhibitory properties are identical to chicken cystatin and its stability against Gdn/HCl is similar. The folding of the del-helix II variant corresponds best to a single step process. In contrast to this, the reversible folding of natural and recombinant chicken cystatin is more complex when recorded by either tryptophan fluorescence or far-ultraviolet-CD. With increasing Gdn/HCl concentration, a stabilization of secondary-structural elements is initially observed, followed by unfolding with minor but distinct intermediate states. The N-del 2 variant has a neutral pI and shows folding behaviour very similar to natural and recombinant chicken cystatin. However its inhibition constants with papain, actinidin and cathepsin B and L are 1000-100,000-fold higher than those obtained with natural and recombinant chicken cystatin.

Amino Acid Sequence↗

Structural aspects of serpin inhibition.

The essential roles of proteins of the serpin family in many physiological processes, along with new discoveries of their unique folding properties, have attracted intense interest in recent years. Many serpins display unusual mobile behavior attributed to rearrangements of alpha-helical or beta-sheet domains, whereby large scale transitions accompany a variety of functions, including inactivation. This unusual behavior was first recognized with the X-ray structure of modified alpha 1-proteinase inhibitor. Subsequent experiments, including new X-ray structures, have revealed a surprising variety of conformations which are functionally important but only partially understood. We review here experimental evidence for conformations relevant to the serpin inhibitory mechanism.

Crystallography, X-Ray↗

Conformational variability of chicken cystatin. Comparison of structures determined by X-ray diffraction and NMR spectroscopy.

The structural model derived from X-ray crystallography for unphosphorylated wild-type chicken cystatin is compared with two chicken cystatin structures derived from NMR spectroscopy: the phosphorylated wild-type and the genetically engineered variant AEF-SIM-M29I-M89L. The comparison shows the same overall fold, but also significant differences in structurally variable segments of the polypeptide chain. The largest such segment, comprising residues 71 to 89, is a region characteristic of the family 2 cystatin inhibitors which contains a disulphide bridge (71-81) and the phosphorylation site (Ser80) discussed in the accompanying article. In the crystal structure, the segment 71 to 76 is found as a flexible loop, 77 to 85 as an alpha-helical segment, and 86 to 89 is completely undefined. The solution NMR structures on the other hand are disordered in the initial segment 72 to 80, have an extended conformation at 81 to 83 in contact with the beta-sheet, and clearly show a beta-turn at residues 87 to 90. The segment comprising residues 53 to 57, with smaller variability, is of particular interest as the hairpin loop conserved throughout the cystatin superfamily which binds to the cysteine proteinase. In most of the solution NMR structures, this segment adopts a conformation more like that of stefin B, a family 1 cystatin inhibitor, as was observed in the crystal structure of its inhibitory complex with papain. The differences between the structures are rationalized by an examination of the crystal contacts generated by hypothetical crystal packing of the NMR structures. Additionally, the X-ray refinement shows evidence of conformational disorder in the crystal. Joint refinement with NOE restraints and reflection data does not produce a structure to satisfy the restraints of both methods.

Animals↗

The 0.25-nm X-ray structure of the Bowman-Birk-type inhibitor from mung bean in ternary complex with porcine trypsin.

The structure of the Bowman-Birk-type inhibitor from mung bean Phaseolus aureus has been determined in ternary complex with porcine trypsin. The complex formed crystals of the trigonal space group P3(1)21 which diffracted to a resolution of 250 pm. Each of the two mung bean protease reactive sites is bound to trypsin according to the standard mechanism for serine proteinase inhibition. The binding loops thereby adopt the canonical conformation for the standard mechanism; however, the sub-van der Waals contact between the active-site serine O gamma (195) and the P1 carbonyl carbon of both loops is significantly smaller (210 pm) than hitherto observed, with continuous electron density connecting the two atoms. The inhibitor is formed by two double-stranded antiparallel beta-sheets, which are connected into a moderately twisted beta-sheet by a network of hydrogen bonds involving main-chain atoms and two water molecules. All contacts with neighbors in the crystal lattice occur between trypsin molecules. This apparently gives rise to an unusual form of disorder where the complexes pack in two orientations Ta:MaMb:Tb and Tb:MbMa:Ta (Ta, Tb = trypsin, Ma = mung bean loop I, Mb = mung bean loop II), such that the asymmetric unit consists of the ternary complex in two orientations, each with half occupancy. This is nearly equivalent to an asymmetric unit which has one trypsin molecule with full occupancy and one mung bean inhibitor with half occupancy and a crystallographic twofold symmetry axis through its center. Because of the approximate twofold symmetry of the inhibitor itself, however, the electron density was interpretable for most of the inhibitor (17 residues at the termini were not resolved) and shows evidence of its double orientation.

Animals↗

Phosphotransferase and substrate binding mechanism of the cAMP-dependent protein kinase catalytic subunit from porcine heart as deduced from the 2.0 A structure of the complex with Mn2+ adenylyl imidodiphosphate and inhibitor peptide PKI(5-24).

The crystal structure of the porcine heart catalytic subunit of cAMP-dependent protein kinase in a ternary complex with the MgATP analogue MnAMP-PNP and a pseudosubstrate inhibitor peptide, PKI(5-24), has been solved at 2.0 A resolution from monoclinic crystals of the catalytic subunit isoform CA. The refinement is presently at an R factor of 0.194 and the active site of the molecule is well defined. The glycine-rich phosphate anchor of the nucleotide binding fold motif of the protein kinase is a beta ribbon acting as a flap with conformational flexibility over the triphosphate group. The glycines seem to be conserved to avoid steric clash with ATP. The known synergistic effects of substrate binding can be explained by hydrogen bonds present only in the ternary complex. Implications for the kinetic scheme of binding order are discussed. The structure is assumed to represent a phosphotransfer competent conformation. The invariant conserved residue Asp166 is proposed to be the catalytic base and Lys168 to stabilize the transition state. In some tyrosine kinases Lys168 is functionally replaced by an Arg displaced by two residues in the primary sequence, suggesting invariance in three-dimensional space. The structure supports an in-line transfer with a pentacoordinate transition state at the phosphorus with very few nuclear movements.

Adenosine Triphosphate↗

Serpin structures.

Explore the source record for details and available documents.

Amino Acid Sequence↗

Recombinant chicken egg white cystatin variants of the QLVSG region.

Using recombinant DNA methods, seven cystatin variants were produced by cassette mutagenesis of a chicken egg white cystatin variant which already contains the mutations Ala3, Glu2, Phe1, Ser1-->Met, Met29-->and Met 89-->Leu. When characterized by structural and functional studies, they were all found to harbour mutations in the first hairpin loop, the so-called 'QXVXG' region, which is highly conserved within the cystatin superfamily and thought to be important for its inhibitory activity towards cysteine proteinases. They were purified to more than 90% homogeneity and analysed by SDS/PAGE, HPLC, tryptic peptide mapping, N-terminal amino acid sequencing and ELISA. Structural model building of the variants and their complexes with papain was performed using computer graphics based on the crystallographic coordinates of chicken egg white cystatin and the papain-stefin complex. Only minor conformational changes were required for modelling the mutants or complexes. Equilibrium dissociation constants and rate constants of complex formation of the variants with papain, actinidin as well as cathepsin B and L were determined by kinetic measurements using fluorogenic substrates. The single exchanges Gln53-->Glu, Gln53-->Asn, Val44-->Asp, Gly57-->Ala and the double exchanges Arg52-->Leu, Gln53-->Glu, Gln53-->Asn, Ser56-->Ala, Leu54-->Met, Gly57-->Ala reduced the inhibition of papain, actinidin and cathespin B significantly by 10-1000-fold. With the exception of the Val55-->Asp variant, the differences in the Ki values are mainly due to larger k off values, whereas the kon values seem to be more or less unaffected by the selected mutations. The effect on the inhibition of papain is generally smaller than the effects on actinidin and cathepsin B inhibition. Cathepsin L inhibition is strikingly insensitive to all mutations. These distinct effects of the inhibitor variants indicate differences in proteinase-inhibitor-protein interactions between closely related cysteine proteinases. In addition, the results verify the prediction, made earlier from sequence alignment studies and from a docking model of the chicken cystatin-papain complex, that the first hairpin loop of cystatins is essential for effective inhibition.

Amino Acid Sequence↗

Evidence for the extent of insertion of the active site loop of intact alpha 1 proteinase inhibitor in beta-sheet A.

The extent of insertion of beta-strand s4A into sheet A in intact serpin alpha 1-proteinase inhibitor (alpha 1PI has been probed by peptide annealing experiments [Schulze et al. (1990) Eur. J. Biochem. 194, 51-56]. Twelve synthetic peptides of systematically varied length corresponding in sequence to the unprimed (N-terminal) side of the active site loop were complexed with alpha 1PI. The complexes were then characterized by circular dichroism spectroscopy and tested for inhibitory activity. Four peptides formed complexes which retained inhibitory activity, one of which was nearly as effective as the native protein. Comparison with the three dimensional structures of cleaved alpha 1PI [Löbermann et al. (1984) J. Mol. Biol. 177, 531-556] and plakalbumin [Wright et al. (1990) J. Mol. Biol. 213, 513-528] supports a model in which alpha 1PI requires the insertion of a single residue, Thr345, into sheet A for activity.

Amino Acid Sequence↗

The refined 2.15 A X-ray crystal structure of human liver cathepsin B: the structural basis for its specificity.

From the lysosomal cysteine proteinase cathepsin B, isolated from human liver in its two-chain form, monoclinic crystals were obtained which contain two molecules per asymmetric unit. The molecular structure was solved by a combination of Patterson search and heavy atom replacement methods (simultaneously with rat cathepsin B) and refined to a crystallographic R value of 0.164 using X-ray data to 2.15 A resolution. The overall folding pattern of cathepsin B and the arrangement of the active site residues are similar to the related cysteine proteinases papain, actinidin and calotropin DI. 166 alpha-carbon atoms out of 248 defined cathepsin B residues are topologically equivalent (with an r.m.s. deviation of 1.04 A) with alpha-carbon atoms of papain. However, several large insertion loops are accommodated on the molecular surface and modify its properties. The disulphide connectivities recently determined for bovine cathepsin B by chemical means were shown to be correct. Some of the primed subsites are occluded by a novel insertion loop, which seems to favour binding of peptide substrates with two residues carboxy-terminal to the scissile peptide bond; two histidine residues (His110 and His111) in this "occluding loop' provide positively charged anchors for the C-terminal carboxylate group of such polypeptide substrates. These structural features explain the well-known dipeptidyl carboxypeptidase activity of cathepsin B. The other subsites adjacent to the reactive site Cys29 are relatively similar to papain; Glu245 in the S2 subsite favours basic P2-side chains. The above mentioned histidine residues, but also the buried Glu171 might represent the group with a pKa of approximately 5.5 near the active site, which governs endo- and exopeptidase activity. The "occluding loop' does not allow cystatin-like protein inhibitors to bind to cathepsin B as they do to papain, consistent with the reduced affinity of these protein inhibitors for cathepsin B compared with the related plant enzymes.

Amino Acid Sequence↗