Biomedical subjects

Peter I Lelkes

Publications and source records attributed to Peter I Lelkes.

At least 19 recordsLinked to original sources

PubMed2007

Synthesis and characterization of electroactive and biodegradable ABA block copolymer of polylactide and aniline pentamer.

A triblock copolymer PLA-b-AP-b-PLA (PAP) of polylactide (PLA) and aniline pentamer (AP) with the unique properties of being both electroactive and biodegradable is synthesized by coupling an electroactive carboxyl-capped AP with two biodegradable bi-hydroxyl-capped PLAs via a condensation reaction. Three different molecule weight PAP copolymers are prepared. The PAP copolymers exhibit excellent electroactivity similar to the AP and polyaniline, which may stimulate cell proliferation and differentiation. The electrical conductivity of the PAP2 copolymer film ( approximately 5x10(-6)S/cm) is in the semiconducting region. Transmission electron microscopic results suggest that there is microphase separation of the two block segments in the copolymer, which might contribute to the observed conductivity. The biodegradation and biocompatibility experiments in vitro prove the copolymer is biodegradable and biocompatible. Moreover, these new block copolymer shows good solubility in common organic solvents, leading to the system with excellent processibility. These biodegradable PAP copolymers with electroactive function thus possess the properties that would be potentially used as scaffold materials for neuronal or cardiovascular tissue engineering.

Absorbable Implants↗

PubMed2006

Co-electrospun poly(lactide-co-glycolide), gelatin, and elastin blends for tissue engineering scaffolds.

In this study, we describe composite scaffolds composed of synthetic and natural materials with physicochemical properties suitable for tissue engineering applications. Fibrous scaffolds were co-electrospun from a blend of a synthetic biodegradable polymer (poly(lactic-co-glycolic acid), PLGA, 10% solution) and two natural proteins, gelatin (denatured collagen, 8% solution) and alpha-elastin (20% solution) at ratios of 3:1:2 and 2:2:2 (v/v/v). The resulting PLGA-gelatin-elastin (PGE) fibers were homogeneous in appearance with an average diameter of 380 +/- 80 nm, which was considerably smaller than fibers made under identical conditions from the starting materials (PLGA, 780 +/- 200 nm; gelatin, 447 +/- 123 nm; elastin, 1060 +/- 170 nm). Upon hydration, PGE fibers swelled to an average fiber diameter of 963 +/- 132 nm, but did not disintegrate. Importantly, PGE scaffolds were stable in an aqueous environment without crosslinking and were more elastic than those made of pure elastin fibers. To investigate the cytocompatibility of PGE, we cultured H9c2 rat cardiac myoblasts and rat bone marrow stromal cells (BMSCs) on fibrous PGE scaffolds. We found that myoblasts grew equally as well or slightly better on the scaffolds than on tissue-culture plastic. Microscopic evaluation confirmed that myoblasts reached confluence on the scaffold surfaces while simultaneously growing into the scaffolds. Histological characterization of the PGE constructs indicated that BMSCs penetrated into the center of scaffolds and began proliferating shortly after seeding. Our results suggest that fibrous scaffolds made of PGE and similar biomimetic blends of natural and synthetic polymers may be useful for engineering soft tissues, such as heart, lung, and blood vessels.

Animals↗

PubMed2006

Heterogeneous breast tumoroids: An in vitro assay for investigating cellular heterogeneity and drug delivery.

Breast tumors are typically heterogeneous and contain diverse subpopulations of tumor cells with differing phenotypic properties. Planar cultures of cancer cell lines are not viable models of investigation of cell-cell and cell-matrix interactions during tumor development. This article presents an in vitro coculture-based 3-dimensional heterogeneous breast tumor model that can be used in drug resistance and drug delivery investigations. Breast cancer cell lines of different phenotypes (MDAMB231, MCF7, and ZR751) were cocultured in a rotating wall vessel bioreactor to form a large number of heterogeneous tumoroids in a single cell culture experiment. Cells in the rotating vessels were labeled with Cell Tracker fluorescent probes to allow for time course fluorescence microscopy to monitor cell aggregation. Histological sections of tumoroids were stained with hematoxylin and eosin, progesterone receptor, E-cadherin (E-cad), and proliferation marker ki67. In vitro tumoroids developed in this study recapture important features of the temporal-spatial organization of solid tumors, including the presence of necrotic areas at the center and higher levels of cell division at the tumor periphery. E-cad-positive MCF7 cells form larger tumoroids than E-cad-negative MDAMB231 cells. In heterogeneous tumors, the irregular surface roughness was mainly due to the presence of MDAMB231 cells, whereas MCF7 cells formed smooth surfaces. Moreover, when heterogeneous tumoroids were placed onto collagen gels, highly invasive MDAMB231 cell-rich surface regions produced extensions into the matrix, whereas poorly invasive MCF7 cells did not. The fact that one can form a large number of 1-mm tumoroids in 1 coculture attests to the potential use of this system at high-throughput investigations of cancer drug development and drug delivery into the tumor.

Breast Neoplasms↗

PubMed2006

Fine-tuning of a three-dimensional microcarrier-based angiogenesis assay for the analysis of endothelial-mesenchymal cell co-cultures in fibrin and collagen gels.

A prerequisite for successful tissue engineering is the existence of a functional microvascular network. We hypothesized that such networks can be created and quantified in an in vitro setting by co-culturing endothelial cells (ECs) with tissue-specific 'bystander cells' in 3-D gel matrices. To test this hypothesis we adapted a previously described in vitro microcarrier-based angiogenesis assay (V. Nehls and D. Drenckhahn, 1995, Microvasc Res 50: 311-322). On optimizing this assay, we noted that the initial EC-microcarrier coverage depended on EC type and seeding technique employed to coat the microcarrier beads with the ECs. A confluent EC monolayer on the microcarrier surfaces formed only when bovine aortic endothelial cells (BAECs) were admixed to the beads under gentle agitation on an orbital shaker. After embedding BAEC-covered microcarrier beads into a sandwich-like arrangement of collagen or fibrin gels, we assessed cellular outgrowth at different serum concentrations in terms of migration distance and sprout formation. Quantifiable sprout formation was highest at 1% fetal bovine serum (FBS) in collagen matrices and at 0.1% FBS in fibrin matrices. At higher serum concentration, excess cell migration and formation of clusters prevented quantitative analysis of sprouting. Following the fine-tuning of this angiogenesis assay, we co-cultured BAECs with adipose tissue-derived fibroblasts (FBs) and vascular smooth muscle cells (SMCs). While FBs were able to increase the average migration distance of BAECs in both matrices, SMCs enhanced BAEC migration in fibrin, but not in collagen gels. By contrast, the number of newly formed sprouts in fibrin gels was increased by both cell types. We conclude that in this model bystander cells enhance EC network formation in a matrix-dependent manner. Additionally, these results stress the importance of carefully selecting the experimental parameters of a given in vitro angiogenesis model.

Animals↗

PubMed2006

A novel real-time system to monitor cell aggregation and trajectories in rotating wall vessel bioreactors.

Rotating wall vessel bioreactors (RWVs) constitute dynamic suspension culture venues for tissue engineering. Quantitative real-time assessment of the kinetics of cell-cell aggregation in RWVs can yield mechanistic information about the initial steps leading to the assembly of individual cells into tissue-like constructs. In our imaging system, fluorescently labeled cells suspended in a HARV-type RWV were irradiated by a laser-beam. Emission was recorded by a camera mounted at 90 degrees to the excitation plane. Using macro lenses, the system identified approximately 5 microm particles from a 5 cm working distance, distinguished aggregated 20 microm microspheres from larger (45 and 90 microm) microspheres, and plotted local trajectories of microspheres and cells. Sizes of PC12 cells assessed by our system matched conventional measurements. We validated the system's ability to follow HepG2 and PC12 aggregation in real time over 24h of RWV culture. Taken together, our system provides the means to measure and analyze in real time the processes that lead to the 3D tissue-like assembly of diverse cell types into spheroids. Future studies include development of intelligent feedback algorithms, allowing automatic control over RWV rotational speed required to maintain aggregating cells and nascent tissue in continual free fall.

Animals↗

PubMed2006

Porogen-based solid freeform fabrication of polycaprolactone-calcium phosphate scaffolds for tissue engineering.

Drop on demand printing (DDP) is a solid freeform fabrication (SFF) technique capable of generating microscale physical features required for tissue engineering scaffolds. Here, we report results toward the development of a reproducible manufacturing process for tissue engineering scaffolds based on injectable porogens fabricated by DDP. Thermoplastic porogens were designed using Pro/Engineer and fabricated with a commercially available DDP machine. Scaffolds composed of either pure polycaprolactone (PCL) or homogeneous composites of PCL and calcium phosphate (CaP, 10% or 20% w/w) were subsequently fabricated by injection molding of molten polymer-ceramic composites, followed by porogen dissolution with ethanol. Scaffold pore sizes, as small as 200 microm, were attainable using the indirect (porogen-based) method. Scaffold structure and porosity were analyzed by scanning electron microscopy (SEM) and microcomputed tomography, respectively. We characterized the compressive strength of 90:10 and 80:20 PCL-CaP composite materials (19.5+/-1.4 and 24.8+/-1.3 Mpa, respectively) according to ASTM standards, as well as pure PCL scaffolds (2.77+/-0.26 MPa) fabricated using our process. Human embryonic palatal mesenchymal (HEPM) cells attached and proliferated on all scaffolds, as evidenced by fluorescent nuclear staining with Hoechst 33258 and the Alamar Blue assay, with increased proliferation observed on 80:20 PCL-CaP scaffolds. SEM revealed multilayer assembly of HEPM cells on 80:20 PCL-CaP composite, but not pure PCL, scaffolds. In summary, we have developed an SFF-based injection molding process for the fabrication of PCL and PCL-CaP scaffolds that display in vitro cytocompatibility and suitable mechanical properties for hard tissue repair.

Calcium Phosphates↗

PubMed2006

Engineering three-dimensional pulmonary tissue constructs.

In this paper, we report on engineering 3-D pulmonary tissue constructs in vitro. Primary isolates of murine embryonic day 18 fetal pulmonary cells (FPC) were comprised of a mixed population of epithelial, mesenchymal, and endothelial cells as assessed by immunohistochemistry and RT-PCR of 2-D cultures. The alveolar type II (AE2) cell phenotype in 2-D and 3-D cultures was confirmed by detection of SpC gene expression and presence of the gene product prosurfactant protein C. Three-dimensional constructs of FPC were generated utilizing Matrigel hydrogel and synthetic polymer scaffolds of poly-lactic-co-glycolic acid (PLGA) and poly-L-lactic-acid (PLLA) fabricated into porous foams and nanofibrous matrices, respectively. Three-dimensional Matrigel constructs contained alveolar forming units (AFU) comprised of cells displaying AE2 cellular ultrastructure while expressing the SpC gene and gene product. The addition of tissue-specific growth factors induced formation of branching, sacculated epithelial structures reminiscent of the distal lung architecture. Importantly, 3-D culture was necessary for inducing expression of the morphogenesis-associated distal epithelial gene fibroblast growth factor receptor 2 (FGFr2). PLGA foams and PLLA nanofiber scaffolds facilitated ingrowth of FPC, as evidenced by histology. However, these matrices did not support the survival of distal lung epithelial cells, despite the presence of tissue-specific growth factors. Our results may provide the first step on the long road toward engineering distal pulmonary tissue for augmenting and/or replacing dysfunctional native lung in diseases, such as neonatal pulmonary hypoplasia.

Animals↗

PubMed2006

Polyaniline, an electroactive polymer, supports adhesion and proliferation of cardiac myoblasts.

Conductive polymers, such as polypyrrole, have recently been studied as potential surfaces/matrices for cell- and tissue-culture applications. We have investigated the adhesion and proliferation properties of H9c2 cardiac myoblasts on a conductive polyaniline substrate. Both the non-conductive emeraldine base (PANi) and its conductive salt (E-PANi) forms of polyaniline were found to be biocompatible, viz., allowing for cell attachment and proliferation and, in the case of E-PANi, maintaining electrical conductivity. By comparison to tissue-culture-treated polystyrene (TCP), the initial adhesion of H9c2 cells to both PANi and E-PANi was slightly reduced by 7% (P < 0.05, n = 18). By contrast, the overall rate of cell proliferation on the conductive surfaces, although initially decreased, was similar to control TCP surfaces. After 6 days in culture on the different surfaces, the cells formed confluent monolayers which were morphologically indistinguishable. Furthermore, we observed that E-PANi, when maintained in an aqueous physiologic environment, retained a significant level of electrical conductivity for at least 100 h, even though this conductivity gradually decreased by about 3 orders of magnitude over time. These results demonstrate the potential for using polyaniline as an electroactive polymer in the culture of excitable cells and open the possibility of using this material as an electroactive scaffold for cardiac and/or neuronal tissue engineering applications that require biocompatibility of conductive polymers.

Actin Cytoskeleton↗

PubMed2006

Cross talk between the cardiovascular and nervous systems: neurotrophic effects of vascular endothelial growth factor (VEGF) and angiogenic effects of nerve growth factor (NGF)-implications in drug development.

Both blood vessels and nerves are guided to their tissue targets by "specific" growth factors such as vascular endothelial growth factor (VEGF) and nerve growth factor (NGF), originally discovered as growth factors specific for endothelial and neuronal cells, respectively. While the eminent role of VEGF in the formation of new blood vessels (angiogenesis) is unquestioned, recent studies indicate that VEGF also has direct effects on the nervous system in terms of neuronal growth, survival (neurotrophic), axonal outgrowth (neurotropic), and neuroprotection. Conversely, NGF, a neurotrophin that plays a crucial role in promoting neurotrophic and neurotropic effects in sympathetic neurons, has recently been identified as a novel angiogenic molecule exerting a variety of effects on endothelial cells and in the cardiovascular system in general. VEGF and NGF have also been implicated in both neurodegenerative and vascular diseases. The pleiotropic effects of these growth factors have raised interest in assessing their therapeutic potential. The challenge for the future is to unravel to what extent the effects of these growth factors are interrelated with regards to their angiogenic, and neurotrophic effects and how to design selective drugs interfering with their respective actions. Most biological actions of NGF and VEGF are mediated by their cognate receptor protein tyrosine kinases, tropomyosin related kinase (trkA for NGF) and kinase insert domain-containing receptor (KDR, VEGFR-2, flk-1 for VEGF), which activate a complex and integrated network of signaling pathways in neurons and endothelial cells. Two small molecules, K252a and SU-5416, which are antagonists of trkA and VEGFR-2, respectively, may serve as key tools in dissecting the role of NGF and VEGF in angiogenesis and neurogenesis. Development of selective drugs specific for the trkA and VEGFR-2 subtypes of receptors will provide new tools for the treatment of neurodegenerative diseases, such as Alzheimer's and Parkinson's, as well as of numerous angiogenesis-dependent diseases, such as cancer, diabetes, and arthritis.

Angiogenesis Inhibitors↗

PubMed2005

Functional recovery of peripheral blood mononuclear cells in modeled microgravity.

Immune function is suppressed in space flight, demonstrated by reduced mitogen-stimulated proliferation of postflight astronaut peripheral blood mononuclear cells (PBMCs). While flight studies are limited, the development of rotating wall vessel (RWV) bioreactors, such as the high aspect ratio vessel (HARV), has facilitated ground-based studies of the effects of modeled microgravity (MMG) on cell-mediated immunity. Astronauts regain immune function 3 days postflight, but this recovery has not yet been demonstrated following MMG. MMG eliminated phytohemagglutinin (PHA)-stimulated proliferation of PBMCs. Upon removal from HARV, full recovery was gradually achieved over a 72 h period, in agreement with postflight studies of astronauts. Recovery from MMG delayed, but did not reduce, the maximal proliferative response compared with PHA-activated stationary cultures. Likewise, peak expression of T cell surface activation markers CD69 and CD25 was delayed upon stimulation following exposure to MMG. MMG and recovery from MMG differentially affected the detection of IL-2 and IFN in supernatants. Further development of this model of immune recovery is important for investigating the mechanisms of immune suppression and recovery in space flight, as well as possible countermeasures to prevent immunosuppression or enhance recovery. Given the analogous immune suppression observed in microgravity, MMG, and aging, further investigation may also lead to advances in anti-aging medicine.

Adolescent↗

PubMed2005

Electrospinning polyaniline-contained gelatin nanofibers for tissue engineering applications.

Polyaniline (PANi), a conductive polymer, was blended with a natural protein, gelatin, and co-electrospun into nanofibers to investigate the potential application of such a blend as conductive scaffold for tissue engineering purposes. Electrospun PANi-contained gelatin fibers were characterized using scanning electron microscopy (SEM), electrical conductivity measurement, mechanical tensile testing, and differential scanning calorimetry (DSC). SEM analysis of the blend fibers containing less than 3% PANi in total weight, revealed uniform fibers with no evidence for phase segregation, as also confirmed by DSC. Our data indicate that with increasing the amount of PANi (from 0 to approximately 5%w/w), the average fiber size was reduced from 803+/-121 nm to 61+/-13 nm (p<0.01) and the tensile modulus increased from 499+/-207 MPa to 1384+/-105 MPa (p<0.05). The results of the DSC study further strengthen our notion that the doping of gelatin with a few % PANi leads to an alteration of the physicochemical properties of gelatin. To test the usefulness of PANi-gelatin blends as a fibrous matrix for supporting cell growth, H9c2 rat cardiac myoblast cells were cultured on fiber-coated glass cover slips. Cell cultures were evaluated in terms of cell proliferation and morphology. Our results indicate that all PANi-gelatin blend fibers supported H9c2 cell attachment and proliferation to a similar degree as the control tissue culture-treated plastic (TCP) and smooth glass substrates. Depending on the concentrations of PANi, the cells initially displayed different morphologies on the fibrous substrates, but after 1 week all cultures reached confluence of similar densities and morphology. Taken together these results suggest that PANi-gelatin blend nanofibers might provide a novel conductive material well suited as biocompatible scaffolds for tissue engineering.

Aniline Compounds↗

PubMed2005

Topographic guidance of endothelial cells on silicone surfaces with micro- to nanogrooves: orientation of actin filaments and focal adhesions.

To mimic the uniformly elongated endothelium in natural linear vessels, bovine aortic endothelial cells (BAECs) are cultured on micro- to nanogrooved, model poly(dimethylsiloxane) (PDMS) substrates preadsorbed with about 300 ng/cm(2) of fibronectin. BAEC alignment, elongation, and projected area were investigated for channel depths of 200 nm, 500 nm, 1 microm, and 5 microm, as well as smooth surfaces. Except for the 5 microm case, the ridge and channel widths were held nearly constant about 3.5 microm. With increasing channel depth, the percentage of aligned BAECs increased by factors of 2, 2, 1.8, and 1.7 for 1, 4, 24, and 48 h. Maximum alignment, about 90%, was observed for 1 microm deep channels at 1 h. The alignment of BAECs on grooved PDMS was maintained at least until cells reached near confluence. F-actin and vinculin at focal adhesions also aligned with channel direction. Analysis of confocal microscopy images showed that focal adhesions localized at corners and along the sidewalls of 1-microm deep channels. In contrast, focal adhesions could not form on the bottom of the 5-microm deep channels. Cell proliferation was similar on grooved and smooth substrates. In summary, PDMS substrates engraved with micro- and nanochannels provide a powerful method for investigating the interplay between topography and cell/cytoskeletal alignment.

Actins↗

PubMed2005

Nerve growth factor-induced migration of endothelial cells.

Nerve growth factor (NGF) is a well known neurotropic and neurotrophic agonist in the nervous system, which recently was shown to also induce angiogenic effects in endothelial cells (ECs). To measure NGF effects on the migration of cultured ECs, an important step in neoangiogenesis, we optimized an omnidirectional migration assay using human aortic endothelial cells (HAECs) and validated the assay with human recombinant basic fibroblast growth factor (rhbFGF) and human recombinant vascular endothelial growth factor (rhVEGF). The potencies of nerve growth factor purified from various species (viper, mouse, and recombinant human) to stimulate HAEC migration was similar to that of VEGF and basic fibroblast growth factor (bFGF) (EC50 of approximately 0.5 ng/ml). Recombinant human bFGF was significantly more efficacious than either viper NGF or rhVEGF, both of which stimulated HAEC migration by approximately 30% over basal spontaneous migration. NGF-mediated stimulation of HAEC migration was completely blocked by the NGF/TrkA receptor antagonist K252a [(8R*,9S*,11S*)-(/)-9-hydroxy-9-methoxycarbonyl-8-methyl-2,3,9,10-tetrahydro-8,11-epoxy-1H,-8H,11H-2,7b,11a-triazadibenzo(a,g)cycloocta(c,d,e)trindene-1-one] (30 nM) but not by the VEGF/Flk receptor antagonist SU-5416 [3-[(2,4-dimethylpyrrol-5-yl) methylidenyl]-indolin-2-one] (250 nM), indicating a direct effect of NGF via TrkA receptor activation on HAEC migration. Viper NGF stimulation of HAEC migration was additively increased by either rhVEGF or rhbFGF, suggesting a potentiating interaction between their tyrosine kinase receptor signaling pathways. Viper NGF represents a novel pharmacological tool to investigate possible TrkA receptor subtypes in endothelial cells. The ability of NGF to stimulate migration of HAEC cells in vitro implies that this factor may play an important role in the cardiovascular system besides its well known effects in the nervous system.

Adrenal Medulla↗

PubMed2005

Electrospun protein fibers as matrices for tissue engineering.

Electrospinning has recently emerged as a leading technique for generating biomimetic scaffolds made of synthetic and natural polymers for tissue engineering applications. In this study, we compared collagen, gelatin (denatured collagen), solubilized alpha-elastin, and, as a first, recombinant human tropoelastin as biopolymeric materials for fabricating tissue engineered scaffolds by electrospinning. In extending previous studies, we optimized the shape and size (diameter or width) of the ensuing electrospun fibers by varying important parameters of the electrospinning process, such as solute concentration and delivery rate of the polymers. Our results indicate that the average diameter of gelatin and collagen fibers could be scaled down to 200-500 nm without any beads, while the alpha-elastin and tropoelastin fibers were several microns in width. Importantly, and contrary to any hitherto reported structures of electrospun polymers, fibers composed of alpha-elastin, especially tropoelastin, exhibited "quasi-elastic" wave-like patterns at increased solution delivery rates. The periodicity of these wave-like tropoelastin fibers was partly affected by the delivery rate. Atomic force microscopy was utilized to profile the topography of individual electrospun fibers and microtensile testing was performed to measure their mechanical properties. Cell culture studies confirmed that the electrospun engineered protein scaffolds support attachment and growth of human embryonic palatal mesenchymal (HEPM) cells.

Animals↗

PubMed2004

Adrenal medullary function and expression of catecholamine-synthesizing enzymes in mice with hypothalamic obesity.

The mechanisms underlying the onset of obesity are complex and not completely understood. An imbalance of autonomic nervous system has been proposed to be a major cause of great fat deposits accumulation in hypothalamic obesity models. In this work we therefore investigated the adrenal chromaffin cells in monosodium glutamate (MSG)-treated obese female mice. Newborn mice were injected daily with MSG (4 mg/g body weight) or saline (controls) during the first five days of life and studied at 90 days of age. The adrenal catecholamine content was 56.0% lower in the obese group when compared to lean controls (P < 0.0001). Using isolated adrenal medulla we observed no difference in basal catecholamine secretion percentile between obese and lean animals. However, the percentile of catecholamine secretion stimulated by high K+ concentration was lower in the obese group. There was a decrease in the tyrosine hydroxylase enzyme expression (57.3%, P < 0.004) in adrenal glands of obese mice. Interestingly, the expression of dopamine beta-hydroxylase was also reduced (47.0%, P < 0.005). Phenylethanolamine N-methyltransferase expression was not affected. Our results show that in the MSG model, obesity status is associated with a defective adrenal chromaffin cell function. We conclude that in MSG obesity the low total catecholamine content is directly related to a decrease of key catecholamine-synthesizing enzymes, which by its turn may lead to a defective catecholamine secretion.

Adrenal Medulla↗

PubMed2002

Homocysteine upregulates vascular cell adhesion molecule-1 expression in cultured human aortic endothelial cells and enhances monocyte adhesion.

Elevated plasma homocysteine is an independent risk factor for atherosclerosis. We hypothesized that homocysteine enhances monocyte/human aortic endothelial cell (HAEC) interactions, a pivotal early event in atherogenesis, by upregulating endothelial adhesion molecules. After incubation of cultured HAECs with reduced DL-homocysteine for up to 24 hours, adhesion of human monocytes to homocysteine-stimulated HAECs was significantly upregulated in a time- and dose-dependent fashion. Pretreatment of HAECs with 100 micromol/L homocysteine caused a 4.5-fold increase in the adhesion of normal human monocytes (P<0.001). Similarly, adhesion of monocytic U937 cells was maximally elevated by 3.5-fold at 100 micromol/L homocysteine (P<0.001). In support of our hypothesis, vascular cell adhesion molecule (VCAM)-1 mRNA expression increased 5-fold in HAECs after 3 hours of treatment with 100 micromol/L homocysteine, as assessed by quantitative reverse transcription- polymerase chain reaction. Neutralizing antibody studies confirmed the involvement of VCAM-1 in mediating monocyte adhesion to homocysteine-stimulated HAECs. Coincubation of HAECs with homocysteine and tumor necrosis factor-alpha synergistically elevated monocyte adhesion as well as VCAM-1 protein expression, with the latter evaluated by flow cytometry. Preincubation of HAECs with cyclooxygenase inhibitors completely abrogated homocysteine-induced monocyte adhesion, whereas scavenging reactive oxygen species and the elevation of NO caused partial inhibition only. These data support the notion that the proinflammatory effects of homocysteine may have important implications in atherogenesis.

Analysis of Variance↗

PubMed2002

Gene expression profiling of human aortic endothelial cells exposed to disturbed flow and steady laminar flow.

Subtraction cloning and cDNA arrays were used to compare steady-state mRNA levels in cultured human aortic endothelial cells (HAEC) exposed for up to 24 h to either high-shear (13 dyn/cm(2)) steady laminar flow (LF), an established representation of "atheroprotective" flow conditions, or low-shear (<1 dyn/cm(2)), pulsatile, nonsteady, non-unidirectional flow (disturbed flow, DF) that simulates conditions in the atherosclerosis-prone areas of the arterial circulation. More than 100 genes not previously known to be flow regulated were identified. Analysis of selected genes by quantitative RT-PCR confirmed the results obtained from the microarrays. These data demonstrate that DF is not simply the absence of LF but in fact represents a distinct biomechanical stimulus that has a profound impact upon the gene expression profile of HAEC in culture. In line with previous studies, many of the changes in mRNA levels induced by LF are atheroprotective. In contrast, DF upregulated the mRNA levels of a plethora of proatherosclerotic genes including proinflammatory, proapoptotic, and procoagulant molecules. For some of the genes whose expression was altered by DF and LF, corresponding changes in EC function (proliferation and monocyte adhesion) could be demonstrated. Specifically, the sustained upregulation of VCAM-1 and increased monocyte adhesion to EC exposed to DF was similar to that found in EC in vivo at atherosclerosis-prone regions, confirming the relevance of our model system for in vivo conditions. Distinct differences in the cellular response induced by TNFalpha and DF suggest that the effects of DF are not mediated entirely by the same signaling pathways that activate NF-kappaB. These studies demonstrate extensive and pathophysiologically relevant changes in sustained gene expression patterns in aortic EC exposed to DF compared with LF which are predicted to induce a proatherogenic EC phenotype.

Adolescent↗

PubMedDate not supplied

Steady unidirectional laminar flow inhibits monolayer formation by human and rat microvascular endothelial cells.

Endothelialization of artificial vascular grafts is rapid and complete in numerous animal models, including dogs and rats, but not in human patients. One possible explanation for this well-known, yet puzzling observation might be that monolayer formation of human endothelial cells (ECs), and of canine or rodent ECs, is affected differently by flow-induced shear stress. To begin testing this hypothesis, the authors wounded confluent monolayers of cultured rat and human ECs and exposed these cultures for 20 h to unidirectional steady laminar shear stress of 10 dyn/cm(2) induced by fluid flow perpendicular to the wound boundaries. In comparison to experimental control cultures simultaneously maintained under static (no-flow) conditions, flow-induced shear stress attenuated the monolayer formation (sheet migration) in both human and rat ECs. In brief, compared to control, the average human EC monolayer formation under shear was reduced by 33% whereas the average rat EC monolayer formation was reduced by 34%. Furthermore, the cell responses showed a dependence on fluid flow direction that differed per species. When exposed to shear stress, human EC monolayer formation was reduced by 16% in the upstream direction (opposing the direction of flow) and reduced by 50% in the downstream direction (with the direction of flow), whereas rat EC monolayer formation was reduced by 64% upstream and showed no change downstream. These findings suggest that although overall monolayer formation is inhibited by fluid-induced shear stress to the same extent in both species, there are cell type- and/or species-dependent migration responses to fluid-induced shear stress, and that different flow conditions possibly contribute to species-specific patterns of endothelialization.

Animals↗