Search PubMed⌕ Search

Biomedical subjects

Paul E Laibinis

Publications and source records attributed to Paul E Laibinis.

12 recordsLinked to original sources

Odd-even variations in the wettability of n-alkanethiolate monolayers on gold by water and hexadecane: a molecular dynamics simulation study.

Molecular dynamics (MD) simulations were performed to investigate odd-even chain length dependencies in the wetting properties of self-assembled monolayers (SAMs) of n-alkanethiols [CH3(CH2)n-1SH] on gold by water and hexadecane. Experimentally, the contact angle of hexadecane on the SAMs depends on whether n is odd or even, while contact angles for water show no odd-even dependence. Our MD simulations of this system included a microscopic droplet of either 256 water molecules or 60 hexadecane molecules localized on an n-alkanethiolate SAM on gold with either an even or odd chain length. Contact angles calculated for these nanoscopic droplets were consistent with experimentally observed macroscopic trends in wettability, namely, that hexadecane is sensitive to structural differences between odd- and even-chained SAMs while water is not. Structural properties for the SAMs (including features such as chain tilt, chain twist, and terminal methyl group tilt) were calculated during the MD simulations and used to generate IR spectra of these films that compared favorably with experimental spectra. MD simulations of SAMs in contact with slabs of water and hexadecane revealed that the effects of these solvents on the structure of the SAM was restricted to the chain terminus and had no effect on the inner structure of the SAM. The density profiles for water and hexadecane on the SAMs were different in that water displayed a significant depletion in its density at the liquid/SAM interface from its bulk value, while no such depletion occurred for hexadecane. This difference in contact may explain the lack of an odd-even variation in the wetting characteristics of water on these surfaces, because the water molecules are positioned further away from the surface and, therefore, are not sensitive to the structural differences in the average orientations for the terminal methyl groups in odd- and even-chained SAMs. In contrast, the differences in the wetting properties of hexadecane on the odd- and even-chained SAMs may reflect the closer proximity of these molecules to the SAM surface and a resulting greater sensitivity to the differences in the terminal methyl group orientations in the SAMs. SAM-solvent interaction energies were calculated during the MD simulations, yielding interaction energies that differed on the even- and odd-chained surfaces by approximately 10% for hexadecane and negligibly for water, in accord with estimates using experimental wetting results.

Alkanes↗

Rigid, superparamagnetic chains of permanently linked beads coated with magnetic nanoparticles. Synthesis and rotational dynamics under applied magnetic fields.

An inexpensive and versatile approach is reported for the synthesis of monodisperse magnetoresponsive rods of desired diameter, length, and magnetic susceptibility based on the confined alignment of magnetic beads in microchannels of selected channel height, followed by localized hydrolysis of sol-gel precursors within polyelectrolyte shells adsorbed on the beads. The layer-by-layer technique was used to coat the polystyrene beads with polyelectrolytes of alternating charge and with charged magnetic nanoparticles, and the polystyrene cores could be removed either by solvent dissolution or by calcination to form hollow-shelled chains. The reorientation dynamics of single and clustered chains following the application of an external magnetic field was evaluated theoretically, with favorable comparisons with the experimental data.

Journal Article↗

Controlled clustering and enhanced stability of polymer-coated magnetic nanoparticles.

The clustering and stability of magnetic nanoparticles coated with random copolymers of acrylic acid, styrenesulfonic acid, and vinylsulfonic acid has been studied. Clusters larger than 50 nm are formed when the coatings are made using too low or too high molecular weight polymers or using insufficient amounts of polymer. Low-molecular-weight polymers result in thin coatings that do not sufficiently screen van der Waals attractive forces, while high-molecular-weight polymers bridge between particles, and insufficient polymer results in bare patches on the magnetite surface. The stability of the resulting clusters is poor, but when an insufficient polymer is used as primary coating, and a secondary polymer is added to coat remaining bare magnetite, the clusters are stable in high salt concentrations (>5 M NaCl), while retaining the necessary cluster size for efficient magnetic recovery. The magnetite cores were characterized by TEM and vibrating sample magnetometry, while the clusters were characterized by dynamic light scattering. The clustering and stability are interpreted in terms of the particle-particle interaction forces, and the optimal polymer size can be predicted well on the basis of these forces and the solution structure and hydrophobicity of the polymer. The size of aggregates formed by limited polymer can be predicted with a diffusion-limited colloidal aggregation model modified with a sticking probability based on fractional coating of the magnetite cores.

Journal Article↗

Synthesis of flexible magnetic nanowires of permanently linked core-shell magnetic beads tethered to a glass surface patterned by microcontact printing.

We have developed an efficient, one-step method to create magnetic nanowires consisting of permanently linked chains of magnetic beads of varying flexibility tethered to a patterned glass surface using simple amidation chemistry. The flexibility of the nanowire was governed by the molecular weight of the molecule used to covalently link the beads and its length by the height of the microchannel in which it was synthesized. The nanowire diameter was determined both by the bead size and by the number of beads adhering to each dot in the microstamped, patterned array. Longer nanowires can form loops attached at two points on the glass surface. Both single flexible chains and flexible loops can adopt different configurations (straight, hairpin, S-shaped, etc.) when subjected to magnetic fields, the configurations depending on the directions of these fields. Shorter, less flexible nanowires align with the field always and do not exhibit the more exotic configurations seen for long, flexible chains and loops. These magnetic nanowires can have potential use in microfluidic pumping and mixing processes and in microparticle manipulation.

Journal Article↗

Electrochemical detection of chloride by underpotentially deposited silver films on polycrystalline gold.

This paper describes an electrochemical method for measuring dilute levels of chloride using an underpotentially deposited (UPD) Ag adlayer on polycrystalline Au substrates as a sensing agent. Specifically, chloride ions adsorb onto the Ag UPD adlayer and effect changes in the electrochemical deposition and stripping characteristics of the silver film. Cyclic voltammograms (CVs) of the native Au/Ag(UPD) electrode in 0.1 M H2SO4(aq) exhibit a primary stripping peak for the Ag UPD adlayer at 550 mV vs Ag(+/0), and chloride adsorption onto the Au/Ag(UPD) surface effects a peak shift to approximately 600 mV vs Ag(+/0), depending on the amount of adsorbed Cl-, as affected by the Cl- concentrations and contact times employed in the derivatization. The chloride-treated electrodes also exhibit a stripping peak at 275 mV that is not observed on the native substrate and increases in intensity with Cl- concentration and derivatization time. The integrated charge density for this latter stripping peak relative to that for the primary stripping peak at 550-610 mV provides a useful metric for quantifying adsorbed Cl- levels, and these values allow measurement of Cl- concentrations in dilute aqueous solutions. For Cl- concentrations between 0.5 and 100 microM, the kinetics of Cl- adsorption followed a transient Langmuir adsorption model and allowed measured surface coverages to be used for determining Cl- solution concentrations. Using contact times of 1 min for Cl- adsorption, the electrodes showed a linear response across Cl- concentrations of 0.5-20 microM.

Adsorption↗

Structure of polymer-stabilized magnetic fluids: small-angle neutron scattering and mean-field lattice modeling.

Small-angle neutron scattering and mean-field lattice modeling were used to characterize a class of water-based magnetic fluids tailored specifically to extract soluble organic compounds from water. The fluids consist of a suspension of approximately 7 nm magnetite (Fe3O4) nanoparticles coated with a bifunctional polymer layer comprised of an outer hydrophilic poly(ethylene oxide) (PEO) region for colloidal stability and an inner hydrophobic poly(propylene oxide) (PPO) region for solubilization of organic compounds. The inner region of the polymer shell is increasingly depleted of water as the fraction of PPO side chains increases. The incorporation of PPO side chains also leads to a small increase in interparticle attraction. The lattice model predicted a shell structure similar to that of a PEO-PPO-PEO triblock copolymer (Pluronic) micelle, with equivalent levels of hydration but with more PEO present in the PPO-rich regions, as the side chains grafted to the surface are less able to segregate than when in free micellar systems.

Journal Article↗

A very thin coating for capillary zone electrophoresis of proteins based on a tri(ethylene glycol)-terminated alkyltrichlorosilane.

We describe the use of a tri(ethylene glycol)-terminated alkyltrichlorosilane to create a very thin, protein-resistant "self-assembled monolayer" coating on the inner surface of a fused-silica capillary. The same compound has been demonstrated previously on flat silica substrates to resist adsorption of many proteins. As a covalently bound capillary coating, it displays good resistance to the adsorption of cationic proteins, providing clean separations of a mixture of lysozyme, cytochrome c, ribonuclease A, and myoglobin for more than 200 consecutive runs. Electroosmotic flow (EOF) was measured as a function of pH; the coated capillary retains significant cathodal EOF, with roughly 50% of the EOF of an uncoated capillary at neutral pH, making this coating promising for applications requiring some EOF. The EOF was reasonably stable, with a 2.9% relative standard deviation during a 24 h period consisting of 72 consecutive separations of cationic proteins. Efficiencies for cationic protein separations were moderate, in the range of 190,000-290,000 theoretical plates per meter. The coating procedure was simple, requiring only a standard cleaning procedure followed by a rinse with the silane reagent at room temperature. No buffer additives are required to maintain the stability of the coating, making it flexible for a range of applications, potentially including capillary electrophoresis-mass spectrometry (CE-MS).

Adsorption↗

A simple soft lithographic route to fabrication of poly(ethylene glycol) microstructures for protein and cell patterning.

We present a simple, direct soft lithographic method to fabricate poly(ethylene glycol) (PEG) microstructures for protein and cell patterning. This lithographic method involves a molding process in which a uniform PEG film is molded with a patterned polydimethylsiloxane stamp by means of capillary force. The patterned surfaces created by this method provide excellent resistance towards non-specific protein and cell adsorption. The patterned substrates consist of two regions: the molded PEG surface that acts as a resistant layer and the exposed substrate surface that promotes protein or cell adsorption. A notable finding here is that the substrate surface can be directly exposed during the molding process due to the ability to control the wetting properties of the polymer on the stamp, which is a key factor to patterning proteins and cells.

Adsorption↗

Structural effects on the barrier properties of self-assembled monolayers formed from long-chain omega-alkoxy-n-alkanethiols on copper.

The adsorption of long-chain omega-alkoxy-n-alkanethiols [CH(3)(CH(2))(p-1)O(CH(2))(m)SH; m = 11, 19, 22; p = 18, 22] onto copper produces self-assembled monolayers (SAMs) that can provide protection against corrosion of the underlying metal substrate. The resulting films are 40-60 A in thickness and are isostructural with SAMs formed on copper from unsubstituted n-alkanethiols. As evidenced by electrochemical impedance spectroscopy (EIS), the barrier properties of these ether-containing SAMs depend on the chain length of the adsorbate and the position of the ethereal unit along the hydrocarbon chain. For SAMs where the ether substitution is farther from the copper surface, the initial coating resistances are similar to those projected for unsubstituted n-alkanethiolate SAMs of similar thickness. For SAMs where the ether substitution is nearer to the copper surface (m = 11), the resistances are significantly less than those for unsubstituted n-alkanethiolate SAMs of similar thickness, reflecting the effect of the molecular structure on the barrier properties of the film. Upon exposure to 1 atm of O(2) at 100% RH, the SAMs become less densely packed as observed by infrared (IR) spectroscopy, and their barrier properties deteriorate as observed by EIS. The rate that the SAMs lose their barrier properties upon exposure to oxidizing conditions is correlated to the strength of intermolecular interactions within the bulk state of the adsorbate.

Journal Article↗

Chemical influences on adsorption-mediated self-propelled drop movement.

We report studies of reactive wetting employing droplets of a nonpolar liquid (decahydronaphthalene) on chemically patterned surfaces. The drops contain an n alkylamine that adsorbs onto surfaces exposing carboxylic acid groups and produces surfaces exposing methyl groups. The change in surface energy that occurs concurrent with the formation of an oriented monomolecular film of alkylamine during this process is sufficient to produce a self-propelled movement of decahydronaphthalene drops on the surface. We employed patterning to direct the movement of the drops on the surface, thereby allowing measurements of the relationships between the macroscopic fluidic behavior of the droplets and microscopic adsorption events. Specifically, we examined the effects of the unbalanced surface-tension force and the influences of adsorbate concentration on drop movement. In this latter case, both kinetic and thermodynamic arguments can be applied to describe the system. We compared the predictions from these two approaches by analyzing data from the present system and those reported by F. Domingues Dos Santos and T. Ondarcuhu [Phys. Rev. Lett. 75(16), 2972 (1975)] that exhibited opposite trends in behavior. The present analysis provides insight into the influence of chemical reaction kinetics on adsorption-mediated drop movement (i.e., reactive wetting).

Journal Article↗

Protein separations using colloidal magnetic nanoparticles.

Phospholipid-coated colloidal magnetic nanoparticles with mean magnetite core size of 8 nm are shown to be effective ion exchange media for the recovery and separation of proteins from protein mixtures. These particles have high adsorptive capacities (up to 1200 mg protein/mL adsorbent, an order of magnitude larger than the best commercially available adsorbents) and exhibit none of the diffusional resistances offered by conventional porous ion exchange media. Protein-laden particles are readily recovered from the feed solution using high-gradient magnetic filtration.

Adsorption↗

Ion-exchange purification of proteins using magnetic nanoclusters.

Polymer-coated magnetic nanoclusters were used for recovery and purification of proteins from both model systems and cell-free Pichia pastoris fermentation broth. The nanoclusters exhibited extremely high capacity for proteins, up to 900 mg/mL adsorbent, and were recovered by high gradient magnetic separation (HGMS) at flow rates of up to 3,600 cm(3)/cm(2) h (flow rates up to 15,000 cm(3)/cm(2) h are possible). The nanoclusters were coated with a primary coating of poly(acrylic acid-co-styrenesulfonic acid-co-vinylsulfonic acid), which allowed both electrostatic and hydrophobic interactions with the protein to be used to enhance specificity for targeted products. With this dual mode separation, nearly pure protein could be recovered from complex mixtures, such as fermentation broth, in a few quick steps.

Culture Media, Conditioned↗