Biomedical subjects

Paul A Lindahl

Publications and source records attributed to Paul A Lindahl.

At least 19 recordsLinked to original sources

PubMed2006

Kinetics of CO insertion and acetyl group transfer steps, and a model of the acetyl-CoA synthase catalytic mechanism.

Acetyl-CoA synthase/carbon monoxide dehydrogenase is a Ni-Fe-S-containing enzyme that catalyzes the synthesis of acetyl-CoA from CO, CoA, and a methyl group. The methyl group is transferred onto the enzyme from a corrinoid-iron-sulfur protein (CoFeSP). The kinetics of two steps within the catalytic mechanism were studied using the stopped-flow method, including the insertion of CO into a putative Ni(2+)-CH(3) bond and the transfer of the resulting acetyl group to CoA. Neither step had been studied previously. Reactions were monitored indirectly, starting with the methylated intermediate form of the enzyme. Resulting traces were analyzed by constructing a simple kinetic model describing the catalytic mechanism under reducing conditions. Besides methyl group transfer, CO insertion, and acetyl group transfer, fitting to experimental traces required the inclusion of an inhibitory step in which CO reversibly bound to the form of the enzyme obtained immediately after product release. Global simulation of the reported datasets afforded a consistent set of kinetic parameters. The equilibrium constant for the overall synthesis of acetyl-CoA was estimated and compared to the product of the individual equilibrium constants. Simulations obtained with the model duplicated the essential behavior of the enzyme, in terms of the variation of activity with [CO], and the time-dependent decay of the NiFeC EPR signal upon reaction with CoFeSP. Under standard assay conditions, the model suggests that the vast majority of active enzyme molecules in a population should be in the methylated form, suggesting that the subsequent catalytic step, namely CO insertion, is rate limiting. This conclusion is further supported by a sensitivity analysis showing that the rate is most sensitively affected by a change in the rate coefficient associated with the CO insertion step.

Acetate-CoA Ligase↗

PubMed2006

Whole-cell modeling framework in which biochemical dynamics impact aspects of cellular geometry.

A mathematical framework for modeling biological cells from a physicochemical perspective is described. Cells modeled within this framework consist of at least two regions, including a cytosolic volume encapsulated by a membrane surface. The cytosol is viewed as a well-stirred chemical reactor capable of changing volume while the membrane is assumed to be an oriented 2-D surface capable of changing surface area. Two physical properties of the cell, namely volume and surface area, are determined by (and determine) the reaction dynamics generated from a set of chemical reactions designed to be occurring in the cell. This framework allows the modeling of complex cellular behaviors, including self-replication. This capability is illustrated by constructing two self-replicating prototypical whole-cell models. One protocell was designed to be of minimal complexity; the other to incorporate a previously reported well-known mechanism of the eukaryotic cell cycle. In both cases, self-replicative behavior was achieved by seeking stable physically possible oscillations in concentrations and surface-to-volume ratio, and by synchronizing the period of such oscillations to the doubling of cytosolic volume and membrane surface area. Rather than being enforced externally or artificially, growth and division occur naturally as a consequence of the assumed chemical mechanism operating within the framework.

Animals↗

PubMed2006

Mössbauer and EPR study of recombinant acetyl-CoA synthase from Moorella thermoacetica.

Mössbauer and EPR spectroscopies were used to study the electronic structure of the A-cluster from recombinant acetyl-CoA synthase (the alpha subunit of the alpha2beta2 acetyl-CoA synthase/CO dehydrogenase). Once activated with Ni, these subunits have properties mimicking those associated with the alpha2beta2 tetramer, including structural heterogeneities. The Fe4S4 portion of the A-cluster in oxidized, methylated, and acetylated states was in the 2+ core oxidation state. Upon reduction with dithionite or Ti3+ citrate, samples of Ni-activated alpha developed the ability to accept a methyl group. Corresponding Mössbauer spectra exhibited two populations of A-clusters; roughly, 70% contained [Fe4S4]1+ cubanes, while approximately 30% contained [Fe4S4]2+ cubanes, suggesting an extremely low [Fe4S4](1+/2+) reduction potential for the 30% portion (perhaps <-800 mV vs NHE). The same population ratio was observed when Ni-free unactivated alpha was used. The 70% fraction exhibited paramagnetic hyperfine structure in the absence of an applied magnetic field, excluding the possibility that it represents an [Fe4S4]1+ cluster coupled to a (proximal) Ni(p)1+. EPR spectra of dithionite-reduced, Ni-activated alpha exhibited features at g = 5.8 and g(ave) approximately 1.93, consistent with a physical mixture of {S = 3/2; S = 1/2} spin-states for A-clusters containing [Fe4S4]1+ clusters. Incubation of Ni-activated alpha with dithionite and CO converted 25% of alpha subunits into the S = 1/2 A(red)-CO state. Previous correlation of this state to functional A-clusters suggests that only the 30% fraction not reduced by dithionite or Ti3+ citrate represents functional A-clusters. Comparison of spin states in oxidized and methylated states suggests that two electrons are required for reductive activation, starting from the oxidized state containing Ni(p)2+. Refitting published activity-vs-potential data supports an n = 2 reductive activation. Enzyme starting in the methylated state exhibited catalytic activity in the absence of an external reductant, suggesting that the two electrons used in reductive activation are retained by the enzyme after each catalytic cycle and that the enzyme does not have to pass through the A(red)-CO state during catalysis. Taken together, our results suggest that a Ni(p)0 state may form upon reductive activation and reform after each catalytic cycle.

Acetate-CoA Ligase↗

PubMed2006

Function of the tunnel in acetylcoenzyme A synthase/carbon monoxide dehydrogenase.

Acetylcoenzyme A synthase/carbon monoxide dehydrogenase (ACS/CODH) contains two Ni-Fe-S active-site clusters (called A and C) connected by a tunnel through which CO and CO2 migrate. Site-directed mutants A578C, L215F, and A219F were designed to block the tunnel at different points along the region between the two C-clusters. Two other mutant proteins F70W and N101Q were designed to block the region that connects the tunnel at the betabeta interface with a water channel also located at that interface. Purified mutant proteins were assayed for Ni/Fe content and examined by electron paramagnetic resonance spectroscopy. Analyses indicate that same metal clusters found in wild-type (WT) ACS/CODH (i.e., the A-, B-, C-, and probably D-clusters) are properly assembled in the mutant enzymes. Stopped-flow kinetics revealed that these centers in the mutants are rapidly reducible by dithionite but are only slowly reducible by CO, suggesting an impaired ability of CO to migrate through the tunnel to the C-cluster. Relative to the WT enzyme, mutant proteins exhibited little CODH or ACS activity (using CO2 as a substrate). Some ACS activity was observed when CO was a substrate, but not the cooperative CO inhibition effect characteristic of WT ACS/CODH. These results suggest that CO and CO2 enter and exit the enzyme at the water channel along the betabeta subunit interface. They also suggest two pathways for CO during synthesis of acetylcoenzyme A, including one in which CO enters the enzyme and migrates through the tunnel before binding at the A-cluster, and another in which CO binds the A-cluster directly from the solvent.

Acetate-CoA Ligase↗

PubMed2005

The tunnel of acetyl-coenzyme a synthase/carbon monoxide dehydrogenase regulates delivery of CO to the active site.

The effect of [CO] on acetyl-CoA synthesis activity of the isolated alpha subunit of acetyl-coenzyme A synthase/carbon monoxide dehydrogenase from Moorella thermoacetica was determined. In contrast to the complete alpha(2)beta(2) enzyme where multiple CO molecules exhibit strong cooperative inhibition, alpha was weakly inhibited, apparently by a single CO with K(I) = 1.5 +/- 0.5 mM; other parameters include k(cat) = 11 +/- 1 min(-)(1) and K(M) = 30 +/- 10 microM. The alpha subunit lacked the previously described "majority" activity of the complete enzyme but possessed its "residual" activity. The site affording cooperative inhibition may be absent or inoperative in isolated alpha subunits. Ni-activated alpha rapidly and reversibly accepted a methyl group from CH(3)-Co(3+)FeSP affording the equilibrium constant K(MT) = 10 +/- 4, demonstrating the superior nucleophilicity of alpha(red) relative to Co(1+)FeSP. CO inhibited this reaction weakly (K(I) = 540 +/- 190 microM). NiFeC EPR intensity of alpha developed in accordance with an apparent K(d) = 30 microM, suggesting that the state exhibiting this signal is not responsible for inhibiting catalysis or methyl group transfer and that it may be a catalytic intermediate. At higher [CO], signal intensity declined slightly. Attenuation of catalysis, methyl group transfer, and the NiFeC signal might reflect the same weak CO binding process. Three mutant alpha(2)beta(2) proteins designed to block the tunnel between the A- and C-clusters exhibited little/no activity with CO(2) as a substrate and no evidence of cooperative CO inhibition. This suggests that the tunnel was blocked by these mutations and that cooperative CO inhibition is related to tunnel operation. Numerous CO molecules might bind cooperatively to some region associated with the tunnel and institute a conformational change that abolishes the majority activity. Alternatively, crowding of CO in the tunnel may control flow through the tunnel and deliver CO to the A-cluster at the appropriate step of catalysis. Residual activity may involve CO from the solvent binding directly to the A-cluster.

Aldehyde Oxidoreductases↗

PubMed2005

LdpA: a component of the circadian clock senses redox state of the cell.

The endogenous 24-h (circadian) rhythms exhibited by the cyanobacterium Synechococcus elongatus PCC 7942 and other organisms are entrained by a variety of environmental factors. In cyanobacteria, the mechanism that transduces environmental input signals to the central oscillator of the clock is not known. An earlier study identified ldpA as a gene involved in light-dependent modulation of the circadian period, and a candidate member of a clock-entraining input pathway. Here, we report that the LdpA protein is sensitive to the redox state of the cell and exhibits electron paramagnetic resonance spectra consistent with the presence of two Fe4S4 clusters. Moreover, LdpA copurifies with proteins previously shown to be integral parts of the circadian mechanism. We also demonstrate that LdpA affects both the absolute level and light-dependent variation in abundance of CikA, a key input pathway component. The data suggest a novel input pathway to the circadian oscillator in which LdpA is a component of the clock protein complex that senses the redox state of a cell.

Bacterial Proteins↗

PubMed2004

A framework for whole-cell mathematical modeling.

The default framework for modeling biochemical processes is that of a constant-volume reactor operating under steady-state conditions. This is satisfactory for many applications, but not for modeling growth and division of cells. In this study, a whole-cell modeling framework is developed that assumes expanding volumes and a cell-division cycle. A spherical newborn cell is designed to grow in volume during the growth phase of the cycle. After 80% of the cycle period, the cell begins to divide by constricting about its equator, ultimately affording two spherical cells with total volume equal to twice that of the original. The cell is partitioned into two regions or volumes, namely the cytoplasm (Vcyt) and membrane (Vmem), with molecular components present in each. Both volumes change during the cell cycle; Vcyt changes in response to osmotic pressure changes as nutrients enter the cell from the environment, while Vmem changes in response to this osmotic pressure effect such that membrane thickness remains invariant. The two volumes change at different rates; in most cases, this imposes periodic or oscillatory behavior on all components within the cell. Since the framework itself rather than a particular set of reactions and components is responsible for this behavior, it should be possible to model various biochemical processes within it, affording stable periodic solutions without requiring that the biochemical process itself generates oscillations as an inherent feature. Given that these processes naturally occur in growing and dividing cells, it is reasonable to conclude that the dynamics of component concentrations will be more realistic than when modeled within constant-volume and/or steady-state frameworks. This approach is illustrated using a symbolic whole cell model.

Animals↗

PubMed2004

Effect of sodium sulfide on Ni-containing carbon monoxide dehydrogenases.

The structure of the active-site C-cluster in CO dehydrogenase from Carboxydothermus hydrogenoformans includes a mu(2)-sulfide ion bridged to the Ni and unique Fe, whereas the same cluster in enzymes from Rhodospirillum rubrum (CODH(Rr)) and Moorella thermoacetica (CODH(Mt)) lack this ion. This difference was investigated by exploring the effects of sodium sulfide on activity and spectral properties. Sulfide partially inhibited the CO oxidation activity of CODH(Rr) and generated a lag prior to steady-state. CODH(Mt) was inhibited similarly but without a lag. Adding sulfide to CODH(Mt) in the C(red1) state caused the g(av) = 1.82 EPR signal to decline and new features to appear, including one with g = 1.95, 1.85 and (1.70 or 1.62). Removing sulfide caused the g(av) = 1.82 signal to reappear and activity to recover. Sulfide did not affect the g(av) = 1.86 signal from the C(red2) state. A model was developed in which sulfide binds reversibly to C(red1), inhibiting catalysis. Reducing this adduct causes sulfide to dissociate, C(red2) to develop, and activity to recover. Using this model, apparent K(I) values are 40 +/- 10 nM for CODH(Rr) and 60 +/- 30 microM for CODH(Mt). Effects of sulfide are analogous to those of other anions, including the substrate hydroxyl group, suggesting that these ions also bridge the Ni and unique Fe. This proposed arrangement raises the possibility that CO binding labilizes the bridging hydroxyl and increases its nucleophilic tendency toward attacking Ni-bound carbonyl.

Aldehyde Oxidoreductases↗

PubMed2004

Acetyl-coenzyme A synthase: the case for a Ni(p)(0)-based mechanism of catalysis.

Acetyl-CoA synthase (also known as carbon monoxide dehydrogenase) is a bifunctional Ni-Fe-S-containing enzyme that catalyzes the reversible reduction of CO(2) to CO and the synthesis of acetyl-coenzyme A from CO, CoA, and a methyl group donated by a corrinoid iron-sulfur protein. The active site for the latter reaction, called the A-cluster, consists of an Fe(4)S(4) cubane bridged to the proximal Ni site (Ni(p)), which is bridged in turn to the so-called distal Ni site. In this review, evidence is presented that Ni(p) achieves a zero-valent state at low potentials and during catalysis. Ni(p) appears to be the metal to which CO and methyl groups bind and then react to form an acetyl-Ni(p) intermediate. Methyl group binding requires reductive activation, where two electrons reduce some site on the A-cluster. The coordination environment of the distal Ni suggests that it could not be stabilized in redox states lower than 2+. The rate at which the [Fe(4)S(4)](2+) cubane is reduced is far slower than that at which reductive activation occurs, suggesting that the cubane is not the site of reduction. An intriguing possibility is that Ni(p)(2+) might be reduced to the zero-valent state. Reinforcing this idea are Ni-organometallic complexes in which the Ni exhibits analogous reactivity properties when reduced to the zero-valent state. A zero-valent Ni stabilized exclusively with biological ligands would be remarkable and unprecedented in biology.

Acetate-CoA Ligase↗

PubMed2004

Effect of Zn on acetyl coenzyme a synthase: evidence for a conformational change in the alpha subunit during catalysis.

Acetyl coenzyme A synthase (ACS) is an alpha2beta2 tetramer in which the active-site A-cluster, located in the alpha subunits, consists of an Fe4S4 cubane bridged to a {Nip Nid} binuclear site. The alpha subunits exist in two conformations. In the open conformation, Nip is surface-exposed, while the proximal metal is buried in the closed conformation. Nip is labile and can be replaced by Cu. In this study, the effects of Zn are reported. ACS in which Zn replaced Nip was inactive and did not exhibit the so-called NiFeC EPR signal nor the ability to accept a methyl group from the corrinoid-iron-sulfur protein (CoFeSP). Once Zn-bound, it could not be replaced by subsequently adding Ni. The Zn-bound A-cluster cannot be reduced and bound with CO or become methylated, probably because Zn (like Cu) is insufficiently nucleophilic for these functions. Unexpectedly, Zn replaced Nip only while ACS was engaged in catalysis. Under these conditions, replacement occurred with kapp approximately 0.6 min-1. Replacement was blocked by including EDTA in the assay mix. Zn appears to replace Nip when ACS is in an intermediate state (or states) of catalysis but this(these) state(s) must not be present when ACS is reduced in CO alone, or in the presence of CoA, CoFeSP, or reduced methyl viologen. Nip appears susceptible to Zn-attack when the alpha subunit is in the open conformation and protected from attack when it is in the closed conformation. This is the first evidence that the structurally-characterized conformations of the alpha subunit change during catalysis, indicating a mechanistic role for this conformational change.

Acetyl Coenzyme A↗

PubMed2004

Evidence for a proton transfer network and a required persulfide-bond-forming cysteine residue in Ni-containing carbon monoxide dehydrogenases.

Carbon monoxide dehydrogenase from Moorella thermoacetica catalyzes the reversible oxidation of CO to CO(2) at a nickel-iron-sulfur active site called the C-cluster. Mutants of a proposed proton transfer pathway and of a cysteine residue recently found to form a persulfide bond with the C-cluster were characterized. Four semiconserved histidine residues were individually mutated to alanine. His116 and His122 were essential to catalysis, while His113 and His119 attenuated catalysis but were not essential. Significant activity was "rescued" by a double mutant where His116 was replaced by Ala and His was also introduced at position 115. The activity was also rescued in double mutants where His122 was replaced by Ala and His was simultaneously introduced at either position 121 or position 123. Activity was also rescued by replacing His with Cys at position 116. Mutation of conserved Lys587 near the C-cluster attenuated activity but did not eliminate it. Activity was virtually abolished in a double mutant where Lys587 and His113 were both changed to Ala. Mutations of conserved Asn284 also attenuated activity. These effects suggest the presence of a network of amino acid residues responsible for proton transfer rather than a single linear pathway. The Ser mutant of the persulfide-forming Cys316 was essentially inactive and displayed no electron paramagnetic resonance signals originating from the C-cluster. Electronic absorption and metal analysis suggest that the C-cluster is absent in this mutant. The persulfide bond appears to be essential for either the assembly or the stability of the C-cluster, and possibly for eliciting the redox chemistry of the C-cluster required for catalytic activity.

Alanine↗

PubMed2004

Structures and energetics of models for the active site of acetyl-coenzyme a synthase: role of distal and proximal metals in catalysis.

Acetyl-coenzyme A (CoA) synthase/carbon monoxide dehydrogenase (ACS/CODH) is a bifunctional enzyme that generates CO from carbon dioxide in the C-cluster of the beta subunit and synthesizes acetyl-CoA from carbon monoxide (CO), CoA, and CH3+ at the active site of the A-cluster in the alpha subunit. On the basis of density functional calculations, we predict that methylation of Nip occurs first, and CO then adds to the NipII-CH3 species to form the intermediate, NipII(CO)(CH3), in which Nip deligates one of its SNid bonds. The CO-insertion/CH3-migration occurs on one metal, the proximal Ni, forming the trigonal planar NipII-acetyl intermediate. The thiolate can bind to NipII and reductively eliminate the thioester. Our calculations disfavor the unprecedented bimetallic CO-insertion/CH3-migration. Ni in the proximal site produces a better catalyst than does Cu.

Acetate-CoA Ligase↗

PubMed2004

Autocatalytic activation of acetyl-CoA synthase.

Acetyl-CoA synthase (ACS identical with ACS/CODH identical with CODH/ACS) from Moorella thermoacetica catalyzes the synthesis of acetyl-CoA from CO, CoA, and a methyl group of a corrinoid-iron-sulfur protein (CoFeSP). A time lag prior to the onset of acetyl-CoA production, varying from 4 to 20 min, was observed in assay solutions lacking the low-potential electron-transfer agent methyl viologen (MV). No lag was observed when MV was included in the assay. The length of the lag depended on the concentrations of CO and ACS, with shorter lags found for higher [ACS] and sub-saturating [CO]. Lag length also depended on CoFeSP. Rate profiles of acetyl-CoA synthesis, including the lag phase, were numerically simulated assuming an autocatalytic mechanism. A similar reaction profile was monitored by UV-vis spectrophotometry, allowing the redox status of the CoFeSP to be evaluated during this process. At early stages in the lag phase, Co(2+)FeSP reduced to Co(+)FeSP, and this was rapidly methylated to afford CH(3)-Co(3+)FeSP. During steady-state synthesis of acetyl-CoA, CoFeSP was predominately in the CH(3)-Co(3+)FeSP state. As the synthesis rate declined and eventually ceased, the Co(+)FeSP state predominated. Three activation reductive reactions may be involved, including reduction of the A- and C-clusters within ACS and the reduction of the cobamide of CoFeSP. The B-, C-, and D-clusters in the beta subunit appear to be electronically isolated from the A-cluster in the connected alpha subunit, consistent with the ~70 A distance separating these clusters, suggesting the need for an in vivo reductant that activates ACS and/or CoFeSP.

Acetate-CoA Ligase↗

PubMed2004

Carbon monoxide dehydrogenase from Rhodospirillum rubrum: effect of redox potential on catalysis.

The Ni-Fe-S-containing C-cluster of carbon monoxide dehydrogenases is the active site for catalyzing the reversible oxidation of CO to CO(2). This cluster can be stabilized in redox states designated C(ox), C(red1), C(int), and C(red2). What had until recently been the best-supported mechanism of catalysis involves a one-electron reductive activation of C(ox) to C(red1) and a catalytic cycle in which the C(red1) state binds and oxidizes CO, forming C(red2) and releasing CO(2). Recent experiments cast doubt on this mechanism, as they imply that activation requires reducing the C-cluster to a state more reduced than C(red1). In the current study, redox titration and stopped-flow kinetic experiments were performed to assess the previous results and conclusions. Problems in previous methods were identified, and related experiments for which such problems were eliminated or minimized afforded significantly different results. In contrast to the previous study, activation did not correlate with reduction of Fe-S clusters in the enzyme, suggesting that the potential required for activation was milder than that required to reduce these clusters (i.e., E(0)(act) > -420 mV vs SHE). Using enzyme preactivated in solutions that were poised at various potentials, lag phases were observed prior to reaching steady-state CO oxidation activities. Fits of the Nernst equation to the corresponding lag-vs-potential plot yielded a midpoint potential of -150 +/- 50 mV. This value probably reflects E degrees ' for the C(ox)/C(red1) couple, and it suggests that C(red1) is indeed active in catalysis.

Aldehyde Oxidoreductases↗

PubMed2004

Stepwise evolution of nonliving to living chemical systems.

Steps by which a nonliving chemical system could have transformed into a living system are described and discussed, assuming general features of Wächtershäuser's chemo-autotrophic surface theory of the origin of life. Environmental species such as CO2 and H2S are proposed to have reacted to form a quasi-steady state metal-bound intermediate (CH3-M) that slowly decayed into waste (CH4). Unpredictable dispersive reactions expanded the system to include surface-bound forms of the citric acid cycle intermediates (oxaloacetate-->citrate). Further reaction yielded an autocatalytic system in which raw materials are converted into the system at exponential rates. Combinatorial dispersive reactions that improved the performance of this system were automatically selected and incorporated into it. Systems evolved critical features of living systems (proteins, membranes, proteins, nucleic acids, etc.) using two related mechanisms called grafting and waste-conversion. Such living systems were transformed from less recognizable types (characterized by autocatalytic spreading, decentralization, poorly defined boundaries, etc.) into more recognizable ones (encapsulated by membranes, controlled by single-molecule genomes, etc.) that self-replicated by a cell division cycle and could evolve by the standard gene-based Darwinian mechanism. The resulting systems are viewed as having an autocatalytic network composed of three linked autocatalytic subreactions.

Cell Cycle↗

PubMed2003

Inactivation of acetyl-CoA synthase/carbon monoxide dehydrogenase by copper.

Two recent crystal structures of acetyl-CoA synthase (ACS) from Moorella thermoacetica exhibited different metal contents and geometries at their active site, called the A-cluster. This led to the proposal of two catalytic mechanisms, one Ni-based, the other Cu-based. ACS was studied with respect to synthase activity, methyl group transfer activity, metal content, and EPR spectroscopy. Our results indicate that Cu is not required for catalysis and that it inactivates ACS by binding to the proximal site of the A-cluster. With Cu in this site, the A-cluster cannot accept a methyl group from the corrinoid-iron-sulfur protein, nor can it exhibit the NiFeC EPR signal after treatment with CO.

Acetate-CoA Ligase↗

PubMed2003

Dynamic responses of protein homeostatic regulatory mechanisms to perturbations from steady state.

Nineteen hypothetical protein homeostatic regulatory mechanisms were constructed and analysed in terms of the rate at which they recovered from a perturbation in the steady-state concentration of any component. Systems were constructed to symbolize transcription/translation processes of the average protein from Escherichia coli (1000 copies of protein P along with 1 gene G per cell). In some model systems, G catalysed the synthesis of P directly, while in others G catalysed the synthesis of mRNA (called M), and M catalysed the synthesis of P in a subsequent step. Recovery rates for each regulatory mechanism were obtained by generating the corresponding system of differential equations, linearizing the system about the steady state, and determining eigenvalues of the associated coefficient matrix. The optimal rate of recovery for a given mechanism, R(D), was determined by combining random and gradient search approaches to find rate constants for which the system recovered fastest. Regulatory elements that improved dynamic regulation were identified. These consisted of negative feedback relationships that involved P binding to either G (to shut off the synthesis of P) or M (to stimulate its degradation). Regulation improved as increasing numbers of P's bound to either G or M; however, the binding to M was more effective. In other mechanisms PP dimers bound G. Dimer-binding mechanisms were roughly twice as effective in terms of regulation as those that bound P monomers. The effect of linking two regulatory "modules" was also investigated. Linking had no effect on R(D), but optimal rate constants for the linked system were similar to those of the unlinked modules, suggesting that it may be feasible to construct regulatory networks by linking individual modules of this type.

Animals↗

PubMed2003

Evaluation of multivalent dendrimers based on melamine: kinetics of thiol-disulfide exchange depends on the structure of the dendrimer.

The rate of thiol-disulfide exchange of dansyl groups mediated by dithiothreitol depends on the structure of the dendrimer. In general, the rate of exchange decreases as the size of the dendrimer increases. Dendrimers with disulfides attached near the core undergo exchange more slowly than dendrimers with disulfides near the periphery. Exchange is a bimolecular (noncooperative) process between dansyl-linked disulfides and dithiothreitol. No evidence for intramolecular macrocylization (cooperative) exchange is observed. Mass spectrometry is used to follow exchange in two dendrimers, providing qualitative and quantitative information about this process. Mathematical models suggest that the rates for exchange for all disulfides of a dendrimer are similar, but increase as the exchange reaction progresses.

Computer Simulation↗