Search PubMed⌕ Search

Biomedical subjects

Patrick Weis

Publications and source records attributed to Patrick Weis.

12 recordsLinked to original sources
PubMed2006

Self-assembly and host-guest chemistry of big metallosupramolecular M4L4 tetrahedra.

Metallosupramolecular tetrahedra M8[L4Ti4] are easily obtained by self-assembly from the triangular ligands L-H6 and titanoyl bis(acetylacetonate) in the presence of alkali metal carbonates as base. All the complexes can be well characterized by 1H NMR in combination with ESI FT-ICR MS. Force field calculations reveal that the tetrahedra show Ti-Ti separations of 17 angstroms ([L1(4)Ti4]8-) and 23.5 angstroms ([L2(4)Ti4]8-), respectively, leading to huge internal cavities. The cavity is readily shielded in the case of L1 but possesses big pores with the bigger ligand L2. [L1(4)Ti4]8- was used to investigate the host-guest chemistry of these container molecules and it was found that cationic organic guest species like anilinium can be introduced in the interior of the complex. Inclusion is nicely followed by NMR spectroscopy. Upon addition of one equivalent of guest the symmetry of the tetrahedron is lost but is regained after addition of significantly more than four equivalents.

Journal Article↗
PubMed2006

Quantifying electron transfer during hyperthermal scattering of C60+ from Au(111) and n-alkylthiol self-assembled monolayers.

A tandem time-of-flight mass spectrometer with an intermediate surface was used to quantify electron transfer during glancing incidence scattering of hyperthermal C(60) (+) (E(coll)=250-500 eV, theta(in)=75 degrees ) from (i) self-assembled monolayers of n-alkylthiols on gold (of various chain lengths), (ii) partly fluorinated alkylthiols on gold, as well as (iii) clean gold surfaces. Self-assembled monolayers (SAMs) behave as insulating layers with their thicknesses determining the electron tunneling probability during collision. Correspondingly, a roughly exponential dependence of the neutralization probability on the chain length n was found. A pronounced dependence of the neutral yield on the primary beam kinetic energy indicates that dynamic SAM deformation and associated projectile penetration depth also play a role in determining electron transfer efficiency. Results are consistent with the molecular deformability of SAMs as determined with other experimental methods.

Journal Article↗
PubMed2006

Cn films (n=50, 52, 54, 56, and 58) on graphite: cage size dependent electronic properties.

Novel semiconducting materials have been prepared under ultrahigh-vacuum conditions by soft-landing mass-selected Cn+ (50< or =n<60; even n) on highly oriented pyrolytic graphite surfaces at mean kinetic energies of 6 eV. In all cases, Cn films grow according to the Volmer-Weber mechanism: the surface is initially decorated by two-dimensional fractal islands, which in later deposition stages become three-dimensional dendritic mounds. We infer that Cn aggregation is governed by reactive sites comprising adjacent pentagons (or heptagons) on individual cages. The resulting covalent cage-cage bonds are responsible for the unusually high thermal stability of the films compared to solid C60. The apparent activation energies for intact Cn sublimation range from 2.2 eV for C58 to 2.6 eV for C50 as derived from thermal desorption spectra. All Cn films exhibit a common valence-band ultraviolet photoelectron spectroscopy spectral feature located around the center of a broad highest occupied molecular-orbital (HOMO)-derived band (EB approximately 2.5 eV). This feature has been assigned to Cn units covalently linked to each other in polymeric structures. To within experimental accuracy, the same work function (4.8 eV) was determined for thick films of all Cn studied. In contrast, "HOMO" ionization potentials were cage size dependent and significantly lower than that obtained for C60. C58 exhibited the lowest HOMO (6.5 eV). Band gaps of Cn films have been determined by depositing small amounts of Cs atoms onto the topmost film layer. HOMO-lowest unoccupied molecular-orbital-derived band gaps between 0.8 eV (C52) and 1.8 eV (C50) were observed, compared to 1.5 eV for solid C60.

Journal Article↗
PubMed2005

5,5'-Diamino-2,2'-bipyridine: a versatile building block for the synthesis of bipyridine/catechol ligands that form homo- and heteronuclear helicates.

Herein we present an improved synthesis of 5,5'-diamino-2,2'-bipyridine (1) starting from the pyrrole-protected aminopyridine 4. By standard reactions 1 can easily be transformed into the imine- or amide-bridged dicatechol-bipyridine ligands L1-H4 and L2-H4. Whereas ligand L1 readily forms homodinuclear helicates [(L1)3Ti2]4-, the attempted formation of mono-, tri-, or even oligonuclear coordination compounds from this ligand did not work. However, the amide-connected ligand L2 affords mononuclear ([(L2-H4)PdCl2], [(L2-H4)3Zn]2+), dinuclear ([(L2)3Ti2]4-), and heterotrinuclear coordination compounds ([(L2)3Ti2Zn]2-).

Journal Article↗
PubMed2005

Solid C58 films.

A new solid material has been created in ultra high vacuum by utilizing the aggregation process of C58 molecules deposited onto highly oriented pyrolytic graphite from a mass selected low-energy ion beam comprising C58+. Cluster fluxes of up to 3x10(11) ions s-1 cm-2 with impinging kinetic energies of 6+/-0.5 eV were typically applied. Growth of the solid C58 phase proceeds according to the cluster-aggregation-based Volmer-Weber scenario where initially ramified 2D islands transform into 3D pyramid-like structures at higher coverages. The C58 films created exhibit much higher thermal stability than the C60 solid phase. Sublimation of C58 sets in at a temperature of 700 K. Ultraviolet photoionization spectra (He I, 21.2 eV) yield a molecular ionization potential in the range between 6.6 and 7 eV. Density functional and Hartree-Fock theories suggest that the formation of C58 dimers and higher multimers upon deposition/aggregation gives rise to the high thermal stability and unique electronic properties of this material.

Biomedical Engineering↗
PubMed2004

Preparation of tripeptide-bridged dicatechol ligands and their macrocyclic molybdenum(VI) complexes: fixation of the RGD sequence and the WKY sequence of urotensin ii in a cyclic conformation.

Dicatechol ligands were prepared with caprylic acid (6-H(4)) or the naturally occurring RGD (23-H(4)) or WKY sequences (32-H(4)) as spacers. 6-H(4) was prepared by solution-phase amide coupling chemistry, while 16, the precursor of 23-H(4), was obtained by solution-phase and solid-phase preparation. In the latter case, a polystyrene resin with a hydrazine benzoate linker was used as the solid support. The last coupling step was performed simultaneously with cleavage of the peptide from the resin. The protecting groups of 16 were all removed in one step to yield the free ligand 23-H(4). The WKY-bridged derivative 32-H(4) was obtained by a similar solid-phase synthesis followed by deprotection. The reaction of all three ligands with dioxomolybdenum(VI) bis(acetylacetonate) afforded 19-membered metallamacrocycles in which the short peptides are conformationally fixed in a turn-type structure. Hereby, the side-chain functionalities of the peptides do not interfere in the metal complexation.

Amino Acid Sequence↗
PubMed2004

Structures of mixed gold-silver cluster cations (Ag(m)Au(n)+, m+n<6): ion mobility measurements and density-functional calculations.

The collision cross sections of Ag(m)Au(n)+ (m+n)<6 cluster ions were determined. For bimetallic clusters, we observe a significant intracluster charge transfer leaving most of the ions positive charge on the silver atoms. The mixed trimeric ions Ag2Au+ and AgAu2+ are triangular like the pure gold and silver trimers. Most of the tetrameric clusters are rhombus shaped, with the exception of Ag3Au+, which has a Y structure with the gold atom in the center. Among the pentamers we find distorted X structures for all systems. For Ag2Au3+ we find an additional isomer which is a trigonal bipyramid. These findings are in line with predictions based on density-functional theory calculations, i.e., all these structures either represent the global minima or are within less than 0.1 eV of the predicted global minimum.

Journal Article↗
PubMed2003

Dicatechol-diimines: easily accessible ligands for the self-assembly of dinuclear triple-stranded helicates.

Dicatechol ligands 3b-g-H4 are simply prepared by imine formation of 2,3-dihydroxybenzaldehyde 2 with a series of different diamines 1b-g . An X-ray structural analysis was obtained for the butyl-bridged compound 3e-H4, showing an intramolecular proton transfer and the formation of a chinoidic "keto-amine" structure. The dicatechol derivatives 3b-g-H4 form dinuclear triple-stranded helicates M4[(3)3Ti2] with titanium(IV) ions in the presence of alkali-metal carbonate. For the phenyl- and the trans-1,4-cyclohexyl-bridged complexes, K4[(3b)3Ti2] and Na4[(3f)3Ti2], X-ray structures were obtained.

Journal Article↗
PubMed2002

The fixation of linear versus loop-type peptidic structures by metal coordination: the coordination chemistry of Val-Val- and Val-Val-Val-bridged dicatechol ligands.

The Val-Val-bridged dicatechol ligand L1-H4 forms triplybridged dinuclear complexes with titanium(IV) ions, while the more flexible Val-Val-Val derivative L2-H4 leads to mixtures of complexes containing species with a cyclic arrangement of the ligand; with [cis-MoO2]2+ on the other hand, a well-defined macrocycle [(L2)MoO2]2- is formed which possesses a loop-type structure in the peptidic part of the ligand.

Biosensing Techniques↗