Biomedical subjects

Patrick N Breysse

Publications and source records attributed to Patrick N Breysse.

18 recordsLinked to original sources

PubMed2006

Household mouse allergen exposure and asthma morbidity in inner-city preschool children.

BACKGROUND: Inner-city children experience disproportionate asthma morbidity, and suspected reasons include indoor environmental exposures. OBJECTIVE: To determine if mouse allergen exposure is a risk factor for asthma morbidity. METHODS: Preschool children with asthma were recruited from inner-city Baltimore, MD. Skin testing was performed and blood was collected at the baseline visit for quantification of mouse allergen specific IgE. A questionnaire evaluated symptoms, medication, and health care use at baseline, 3 months, and 6 months. A trained technician collected dust samples from the child's home for analysis of Mus m 1 at baseline, 3 months, and 6 months. Outcomes were compared between mouse-sensitized, highly exposed children and all other children. RESULTS: A total of 127 children had complete data for mouse sensitization status and bedroom settled dust mouse allergen levels at baseline. The mean age of the children was 4.4 years, 92% were African American, and 26% were sensitized to mouse. Mouse-sensitized children exposed to higher levels of Mus m 1 (>0.5 microg/g) had 50% more days of symptoms (incidence rate ratio [IRR], 1.5; 95% confidence interval [CI], 1.1-2.1) and 80% more days of beta-agonist use than other children (IRR, 1.8; 95% CI, 1.3-2.5). Children in the sensitized and highly exposed group were also more likely to have an unscheduled physician visit (odds ratio [OR], 3.1; 95% CI, 1.6-6.3), emergency department visit (OR, 2.1; 95% CI, 1.1-4.1), and hospitalization (OR, 36.6; 95% CI, 4.1-327.3) than other children. These associations between mouse allergen exposure and asthma symptoms and morbidity remained statistically significant after adjusting for potential confounders, including atopy and cockroach sensitization and exposure. CONCLUSIONS: In mouse-sensitized inner-city children, exposure to mouse allergen may be an important cause of asthma morbidity.

Allergens↗

PubMed2005

The effect of clinical UVA/B exposures on urinary urocanic acid isomer levels in individuals with caucasian type (II/III) skin types.

Terrestrial ultraviolet radiation (UVR) exposure, consisting of ultraviolet A (320-40 nm) and B (290-320 nm), results in the photoisomerizion of epidermal trans-urocanic acid (trans-UCA) to cis-urocanic acid (cis-UCA), a potential suppressor of local and systemic immune responses. This study examines urinary UCA isomers as biomarkers of UVA/B exposure. It presents results measuring both cis- and trans-UCA in human urine samples collected from a group of study subjects (skin types II/III) that underwent controlled UVA/B exposures similar to those administered in commercial suntanning parlors. The UCA isomers were purified from urine using C18 solid-phase extraction columns followed by high-performance liquid chromatography (HPLC) with UV absorbance (268 nm) detection. The UCA biomarker was expressed as the ratio of cis-UCA to trans-UCA (UCA ratio), or as cis-UCA concentration corrected for urine volume using creatinine (cis-UCA-Cr). The UCA ratio increased over baseline in the urine of individuals exposed to UVA/B. A single exposure to approximately 70 percent minimal erythema dose (MED) of UVR (95 % UVA/5 % UVB to approximately 90 % of skin area) produced a 4.75-fold increase in the UCA ratio (p< 0.001) relative to baseline. Repeated daily UV exposures of similar doses produced a minimal increase in UCA ratio above that of the single UV exposure. These findings indicate that UCA cis-trans ratio holds promise as a biomarker for recent solar UV exposure.

Adult↗

PubMed2005

Differences in dissolution behavior in a phagolysosomal simulant fluid for single-constituent and multi-constituent materials associated with beryllium sensitization and chronic beryllium disease.

Particle dissolution within macrophage phagolysosomes is hypothesized to be an important source of dissolved beryllium for input to the cell-mediated immune reaction associated with development of beryllium sensitization and chronic beryllium disease (CBD). To better understand the dissolution of beryllium materials associated with elevated prevalence of sensitization and CBD, single-constituent (beryllium oxide (BeO) particles sampled from a screener operation, finished product BeO powder, finish product beryllium metal powder) and multi-constituent (particles sampled from an arc furnace during processing of copper-beryllium alloy) aerosol materials were studied. Dissolution rates were measured using phagolysosomal simulant fluid (PSF) in a static dissolution technique and then normalized to measured values of specific surface area to calculate a chemical dissolution rate constant (k) for each material. Values of k, in g/(cm2 day), for screener BeO particles (1.3 +/- 1.9 x 10(-8)) and for BeO powder (1.1 +/- 0.5 x 10(-8)) were similar (p = 0.45). The value of k observed for beryllium metal powder (1.1 +/- 1.4 x 10(-7)) was significantly greater than observed for the BeO materials (p < 0.0003). For arc furnace particles, k (1.6 +/- 0.6 x 10(-7)) was significantly greater than observed for the BeO materials (p < 0.00001), despite the fact that the chemical form of beryllium in the aerosol was BeO. These results suggest that dissolution of beryllium differs among physicochemical forms of beryllium and direct measurement of dissolution is needed for multi-constituent aerosol. Additional studies of the dissolution behavior of beryllium materials in a variety of mixture configurations will aid in developing exposure-response models to improve understanding of the risk of beryllium sensitization and CBD.

Aerosols↗

PubMed2005

Impact of the 2002 Canadian forest fires on particulate matter air quality in Baltimore city.

With increasing evidence of adverse health effects associated with particulate matter (PM), the exposure impact of natural sources, such as forest fires, has substantial public health relevance. In addition to the threat to nearby communities, pollutants released from forest fires can travel thousands of kilometers to heavily populated urban areas. There was a dramatic increase in forest fire activity in the province of Quebec, Canada, during July 2002. The transport of PM released from these forest fires was examined using a combination of a moderate-resolution imaging spectroradiometer satellite image, back-trajectories using a hybrid single-particle Lagrangian integrated trajectory, and local light detection and ranging measurements. Time- and size-resolved PM was evaluated at three ambient and four indoor measurement sites using a combination of direct reading instruments (laser, time-of-flight aerosol spectrometer, nephelometer, and an oscillating microbalance). The transport and monitoring results consistently identified a forest fire related PM episode in Baltimore that occurred the first weekend of July 2002 and resulted in as much as a 30-fold increase in ambientfine PM. On the basis of tapered element oscillating microbalance measurements, the 24 h PM25 concentration reached 86 microg/m3 on July 7, 2002, exceeding the 24 h national ambient air quality standard. The episode was primarily comprised of particles less than 2.5 microm in aerodynamic diameter, highlighting the preferential transport of the fraction of PM that is of greatest health concern. Penetration of the ambient episode indoors was efficient (median indoor-to-outdoor ratio 0.91) such that the high ambient levels were similarly experienced indoors. These results are significant in demonstrating the impact of a natural source thousands of kilometers away on ambient levels of and potential exposures to air pollution within an urban center. This research highlights the significance of transboundary air pollution and the need for studies that assess the public health impacts associated with such sources and transport processes.

Air Movements↗

PubMed2005

Indoor exposures to air pollutants and allergens in the homes of asthmatic children in inner-city Baltimore.

This paper presents indoor air pollutant concentrations and allergen levels collected from the homes of 100 Baltimore city asthmatic children participating in an asthma intervention trial. Particulate matter (PM), NO2, and O3 samples were collected over 72 h in the child's sleeping room. Time-resolved PM was also assessed using a portable direct-reading nephelometer. Dust allergen samples were collected from the child's bedroom, the family room, and the kitchen. The mean PM10 concentration, 56.5+/-40.7 microg/m3, is 25% higher than the PM2.5 concentration (N=90), 45.1+/-37.5 microg/m3. PM concentrations measured using a nephelometer are consistent and highly correlated with gravimetric estimates. Smoking households' average PM2.5 and PM10 concentrations are 33-54 microg/m3 greater than those of nonsmoking houses, with each cigarette smoked adding 1.0 microm/m3 to indoor PM2.5 and PM10 concentrations. Large percentages of NO2 and O3 samples, 25% and 75%, respectively, were below the limit of detection. The mean NO2 indoor concentration is 31.6+/-40.2 ppb, while the mean indoor O3 concentration in the ozone season was 3.3+/-7.7 ppb. The levels of allergens are similar to those found in other inner cities. Results presented in this paper indicate that asthmatic children in Baltimore are exposed to elevated allergens and indoor air pollutants. Understanding this combined insult may help to explain the differential asthma burden between inner-city and non-inner-city children.

Air Pollutants↗

PubMed2005

Respiratory effects of inhalation exposure among workers during the clean-up effort at the World Trade Center disaster site.

During December 2001 we conducted a field study of 183 clean-up and recovery workers at the World Trade Center (WTC) disaster site to assess respiratory health effects potentially resulting from their work at the site. On site, we administered a respiratory health questionnaire designed to assess upper respiratory symptoms and lower respiratory symptoms, including cough, phlegm, and wheeze, as well as indices of exposure, including number of days worked at the site and job category. Spirometry was conducted for 175 workers. Sixty-five percent of the workers surveyed arrived at the site without lower respiratory symptoms. Of this group, 34% developed cough, 24% developed phlegm, and 19% developed wheeze. Prevalence rates of these symptoms were related to the number of days spent working at the WTC, but not job category. The mean percentage predicted FEV(1) and FVC were 6% and 5% lower, respectively, for workers who developed new lower respiratory symptoms compared to those who remained symptom free. While the development of new wheeze suggested the presence of airway obstruction, the near-normal distribution of age-adjusted FEV(1)/FVC ratios suggested that the degree of obstruction was mild. The prevalence rates of upper airway symptoms (nasal congestion, sore throat, hoarse throat) exceeded those of lower respiratory symptoms, however, it was not determined whether symptoms pre-dated arrival at the WTC site.

Adult↗

PubMed2005

Asbestos exposures to truck drivers during World Trade Center cleanup operations.

This article presents results of asbestos air sampling conducted to assess the exposure to truck drivers working at the World Trade Center site. Sampling consisted of a combination of area and personal monitoring of 49 truck drivers and included optical and electron microscopic analyses. Three sampling periods were conducted: October 1-7, 2001, October 17-26, 2001, and April 13-23, 2002. Area sample locations were selected to estimate airborne concentrations around the perimeter of the site, on top of the pile, and in the pit. Air samples were collected using a 50-mm conductive cowl and a 25-mm mixed cellulose ester filter at flow rates ranging from 0.5-2 L/min. Samples were analyzed using a combination of phase contrast microscopy (PCM) NIOSH method 7400, transmission electron microscopy (TEM) NIOSH method 7402, and the direct method specified under the Asbestos Hazardous Emergency Response Act. Sample times and flow rates were adjusted to prevent overloading while maximizing sample volume. Personal sampling results suggest that asbestos fiber exposures to truck drivers at the site were low. Exposures based on TEM results generally ranged from less than detectable to 0.1 structures per cubic centimeter (s/cm(3)). TEM-based results further indicate that the majority of asbestos fibers were chrysotile and less than 5 microm in length. PCM-based estimates were generally higher than the TEM results. This is likely due to the counting of nonasbestos fibers. This conclusion is supported by the NIOSH 7402 TEM results, which did not detect asbestos fibers longer than 5 micro m. Area sample results were generally less than the personal results (except for the sample collected on top of the rubble pile) and decreased over the course of the cleanup. Our results show low airborne asbestos concentrations and a predominance of short fibers. Given these low concentrations, evidence of short fibers, and the short duration of the exposure (less than 10 months to complete the cleanup), it is likely that truck drivers working at the site are not at an increased risk for asbestos-related disease.

Asbestos↗

PubMed2005

Influence of geographic location in modeling blood pesticide levels in a community surrounding a U.S. Environmental protection agency superfund site.

In this study we evaluated residential location as a potential determinant for exposure to organochlorine compounds. We investigated the geographic distribution characteristics of organochlorine levels in approximately 1,374 blood samples collected in 1974 from residents of a community with a potential organochlorine source. Street addresses of Washington County, Maryland, residents were obtained and geocoded in a geographic information system. We used multivariate linear regression models to characterize the blood organochlorine levels of these residents that had been analyzed as part of previous studies using both environmental- and individual-level covariates. This was done to evaluate if the geographic distribution of blood levels in participants was related to the environmental source in the community. Model inference was based on generalized least squares to account for residual spatial variation. A significant inverse relationship was found between blood dieldrin levels and residential distance from the potential source. For every mile of distance from the source, blood dieldrin levels decreased 1.6 ng/g in study participants (p-value = 0.042), adjusting for age, sex, education level, smoking status, and drinking water source. 1,1-Dichloro-2,2-bis(p-chlorophenyl)ethylene (DDE) levels in the blood did not change significantly based on residential distance from the source, taking the same covariates into account. However, these results are limited by the inability to account for several potential confounders. This study demonstrates that spatially distributed covariates may play an important role in individual exposure patterns. Spatial information may enable researchers to detect a potential exposure pattern that may not be revealed with only nonspatial variables.

Environmental Monitoring↗

PubMed2004

Characterization of physicochemical properties of beryllium aerosols associated with prevalence of chronic beryllium disease.

Little is known about the physicochemical properties of beryllium aerosols associated with increased risk of beryllium sensitization and chronic beryllium disease (CBD). Such information is needed to evaluate whether airborne mass of beryllium is the appropriate metric of exposure or alternatively to provide a scientific basis for using information on particle size, surface area, and chemistry to support an improved exposure limit based on bioavailability through the inhalation and dermal routes of exposure. Thus, we used a suite of analytical techniques to characterize aerodynamically size-fractionated beryllium particles and powders that have been associated in epidemiological studies with higher prevalence of CBD. Aerosol particles were sampled from the ventilation systems of production lines for powders of beryllium metal and beryllium oxide and for ingots of copper-beryllium alloy. End product powders from the metal and oxide production lines were also collected. Particles released during production of beryllium metal were found to be complex, having heterogeneous composition, including reactive species such as fluorine. Powders from beryllium metal production were of high purity with only a minor component of beryllium oxide. Both particles and powders from oxide production were high-purity oxide. Particles released during production of copper-beryllium alloy were heterogeneous, being predominantly copper oxides. Thus, all particles and powders contain at least some beryllium in the form of beryllium oxide. These data justify efforts to thoroughly characterize beryllium aerosol properties when performing exposure assessments. The data also suggest that differences in particle chemical composition, size, number, and surface area may influence bioavailability of beryllium and contribute to risk of CBD. However, a scientific basis does not yet exist to replace mass as the current metric of exposure.

Aerosols↗

PubMed2004

Parental lead exposure and total anomalous pulmonary venous return.

BACKGROUND: Investigators from the Baltimore-Washington Infant Study (BWIS) reported an association between self-reported maternal lead exposure and total anomalous pulmonary venous return (TAPVR) in their offspring. This association was further evaluated in the BWIS population using a more sensitive exposure estimate. METHODS: Cases included 54 live-born infants with TAPVR; controls were a stratified random sample of 522 live-born infants from the BWIS control group. Parental lead exposure was based on three assessment methods, including: an industrial hygiene assessment, an a priori job exposure matrix, and self-reported exposures. A parent was classified as exposed to lead if he/she was classified as exposed by any one of the assessment methods. RESULTS: Approximately 17% of case mothers and 11% of control mothers were classified as exposed to lead during the three months prior to conception through the first trimester (odds ratio [OR], 1.57; 95% confidence interval [CI], 0.64-3.47). Among fathers, 61% of case fathers and 46% of control fathers were classified as exposed to lead during the six months prior to conception (paternal critical period) (OR, 1.83; 95% CI, 1.00-3.42). During the paternal critical period, when only the father was exposed compared to neither parent exposed, the OR for any lead exposure and TAPVR was 1.65 (95% CI, 0.84-3.25). CONCLUSIONS: This study supports a possible association between paternal lead exposure and TAPVR. Further studies are warranted using validated assessment methods for occupational and nonoccupational lead exposures to corroborate this association and to elucidate the possible biological mechanism. Birth Defects Research (Part A), 2004.

Adult↗

PubMed2004

Methods and issues in conducting a community-based environmental randomized trial.

The environment is suspected to play an important role in the prevalence and severity of asthma in inner-city children. This paper describes the implementation and baseline data of an inner-city community-based participatory research clinical trial designed to test the effectiveness of a pollutant and allergen control strategy on children's asthma morbidity. Participants were 100 elementary-school-aged children with asthma, graduates of a school-based asthma education program in East Baltimore. The intervention for half of the randomly assigned families consisted of environmental control education, allergen-proof encasements, pest extermination, and a HEPA air cleaner at the beginning of the study. Controls received the same at the end of the study. Participants visited a clinic for questionnaires, allergy skin testing, spirometry, and blood sample at baseline and 12 months. Home environments, NO(2), O(3), airborne particulates, and allergens were evaluated at baseline and at 6 and 12 months. Asthma morbidity and adherence was assessed quarterly. Collaboration with the community proved very beneficial in creating a study design and procedures acceptable to an inner-city community.

Air Pollution, Indoor↗

PubMed2004

Geostatistics and GIS: tools for characterizing environmental contamination.

Geostatistics is a set of statistical techniques used in the analysis of georeferenced data that can be applied to environmental contamination and remediation studies. In this study, the 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (DDE) contamination at a Superfund site in western Maryland is evaluated. Concern about the site and its future clean up has triggered interest within the community because residential development surrounds the area. Spatial statistical methods, of which geostatistics is a subset, are becoming increasingly popular, in part due to the availability of geographic information system (GIS) software in a variety of application packages. In this article, the joint use of ArcGIS software and the R statistical computing environment are demonstrated as an approach for comprehensive geostatistical analyses. The spatial regression method, kriging, is used to provide predictions of DDE levels at unsampled locations both within the site and the surrounding areas where residential development is ongoing.

Dichlorodiphenyl Dichloroethylene↗

PubMed2003

Summary of historical beryllium uses and airborne concentration levels at Los Alamos National Laboratory.

Beryllium operations and accompanying medical surveillance of workers at Los Alamos National Laboratory began in the 1940s. In 1999 a Former Workers Medical Surveillance Program that includes screening for chronic beryllium disease was initiated. As part of this program, historical beryllium exposure conditions were reconstructed from archived paper and electronic industrial hygiene data sources to improve understanding of past beryllium uses and airborne concentration levels. Archived industrial hygiene sampling reports indicated beryllium was principally used in technical areas-01 and -03, primarily being machined. Beryllium was also used at 15 other technical areas in activities that ranged from explosives detonation to the manufacture of X-ray windows. A total of 4528 personal breathing zone and area air samples for beryllium, combined for purposes of calculating summary statistics, were identified during the records review phase. The geometric mean airborne beryllium concentration for the period 1949-1989 for all technical areas was 0.04 microg Be/m(3) with 97 percent of all sample below the 2.0 microg Be/m(3) occupational exposure limit (OEL). Average beryllium concentrations per decade were less than 1 microg Be/m(3) and annual geometric mean concentrations in technical area-03, the largest user of beryllium, were generally below 0.1 microg Be/m(3), indicating exposure was generally well-controlled, that is, below the OEL. Typical of many retrospective exposure assessments, not all archived data could be extracted and summarized. Despite this, we report a reasonable summary of potential beryllium uses and airborne concentration levels a worker may have encountered from 1949-1989. These data can be used to more effectively identify former worker populations at potential risk for chronic beryllium disease and to offer these workers screening as part of the Former Worker Medical Surveillance Program, and in the event that a case is diagnosed, help to understand historical exposure conditions.

Air Pollutants, Occupational↗

PubMed2003

The impact of a building implosion on airborne particulate matter in an urban community.

In response to community concerns, the air quality impact of imploding a 22-story building in east Baltimore, MD, was studied. Time- and space-resolved concentrations of indoor and outdoor particulate matter (PM) (nominally 0.5-10 microm) were measured using a portable nephelometer at seven and four locations, respectively. PM10 levels varied in time and space; there was no measurable effect observed upwind of the implosion. The downwind peak PM10 levels varied with distance (54,000-589 microg/m3) exceeding pre-implosion levels for sites 100 and 1130 m 3000- and 20-fold, respectively. Estimated outdoor 24-hr integrated mass concentrations varied from 15 to 72 microg/m3. The implosion did not result in the U.S. Environmental Protection Agency (EPA) National Ambient Air Quality Standard (NAAQS) for PM10 being exceeded. X-ray fluorescence analysis indicated that the elemental composition was dominated by crustal elements: calcium (57%), silicon (23%), aluminum (7.6%), and iron (6.1%). Lead was above background but at a low level (0.17 microg/m3). Peak PM10 concentrations were short-lived; most sites returned to background within 15 min. No increase in indoor PM10 was observed even at the most proximate 250 m location. These results demonstrate that a building implosion can have a severe but short-lived impact on community air quality. Effective protection is offered by being indoors or upwind.

Air Pollutants↗

PubMed2002

Development of a medical examination program for former workers at a Department of Energy national laboratory.

BACKGROUND: As a part of the U.S. Department of Energy (DOE) Former Workers' Medical Surveillance Program, a Needs Assessment was conducted at Los Alamos National Laboratory (LANL). The objective was to identify former LANL employees who may be at significant risk for occupational disease and determine whether a medical examination program could reduce morbidity or mortality. We describe the needs assessment approach used at LANL. METHODS: An algorithm was developed to make needs determinations. Information on factors including exposure, health impacts, size of exposed populations, and LANL worker concerns and recommendations were obtained. Each of these factors was scored from 1 to 3. The resulting factor sum was then multiplied by a binary (1 or 0) intervention suitability factor which was 1 if both of the following were available: (1) a screening test with acceptable sensitivity and specificity for the health outcome of concern; and (2) an intervention that decreases morbidity or mortality. This resulted in an Intervention Needs Score that was used to set priorities for the medical examination program for the estimated 35,000 former LANL workers. RESULTS: Analysis of the algorithm output suggested that six exposure categories be recommended for consideration in a medical examination program. Beryllium, asbestos, and noise clearly warranted inclusion. Lead and ionizing radiation required careful consideration regarding availability of screening tests. Solvents were problematic due to the lack of screening tests and suitable intervention in formerly exposed workers. CONCLUSIONS: The algorithm approach to the needs assessment at LANL documented that six chemical and physical agents should be considered as candidates for inclusion in a medical examination program for former workers.

Aged↗

PubMed2002

Complement factor 3 mediates particulate matter-induced airway hyperresponsiveness.

Epidemiologic studies have suggested that exposure to airborne particulate matter (PM) can exacerbate allergic airway responses; however, the mechanism(s) are not well understood. We and others have recently shown that development of airway hyperresponsiveness (AHR) may be a complement-mediated process. In the present study, we examined the role of complement factor 3 (C3) in the development of PM-induced AHR and airway inflammation by comparing responses between C3-deficient (C3(-/-)) and wild-type mice. Mice were exposed to 0.5 mg of ambient particulate collected in urban Baltimore. Forty-eight hours later, airway responsiveness to intravenous acetylcholine was assessed and bronchoalveolar lavage was conducted. PM exposure of wild-type mice resulted in significant increases in AHR, whereas it did not significantly increase airway reactivity in C3(-/-) mice. Interestingly, PM induced similar inflammatory responses in both wild-type and C3(-/-) mice. Immunohistochemical staining demonstrated marked C3 deposition in the airway epithelium and connective tissue of wild-type mice after PM exposure. These results suggest that exposure to PM may induce AHR through activation of complement factor 3 in the airways.

Air Pollution↗

PubMedDate not supplied

Comparison of extremely low frequency (ELF) magnetic field personal exposure monitors.

The MultiWave System III (MW III), a recently developed personal monitor for extremely low frequency (ELF) magnetic fields, was compared with the standard EMDEX Lite (Electric and Magnetic Field Digital Exposure System), the type of monitor widely used in epidemiology and other exposure assessments. The MW III captures three-axis magnetic field waveforms for the calculation of many exposure metrics, while the EMDEX monitors measure only the root-mean-squared (RMS) vector magnitude (or resultant). Thirty-eight partial period personal samples were monitored in six different job classifications. The sampling time for each personal sample ranged from 90 to 133 min, with a mean sample time of 110 min. The EMDEX Lite and MW III were evaluated by comparing the maximum and partial period time-weighted average (TWA) of the ELF magnitude. TWA exposures measured for the 38 partial period samples by the EMDEX Lite ranged from 1.2 to 65.3 mG, with a mean of 18.1 mG, while corresponding values for the MW III ranged from 1.1 to 65.8 mG, with a mean of 17.7 mG. The maximum magnetic field exposures measured for the 38 partial period personal samples by the EMDEX Lite ranged from 27.0 to 420.2 mG, with a mean of 216.3 mG, while corresponding values for the MW III ranged from 40.2 to 1311.8 mG, with a mean of 368.4 mG. The maximum and TWA ELF magnetic field exposures measured by the EMDEX Lite and MW III were compared using a two-tailed, paired t-test. Analyses indicate that there was no significant difference in the TWA magnetic field magnitude measured by the EMDEX Lite and MW III. On the other hand, the EMDEX Lite reported significantly lower (P=0.002) maximum magnetic field measurements compared to the MW III. From a detailed analysis of the time traces, the EMDEX Lite appears to measure the ELF magnitude inaccurately when the field changes rapidly over a 4-s sampling interval. The results of this comparison suggest that the standard EMDEX Lite and MW III provide similar measure of the TWA magnetic field in a variety of occupational settings and ELF magnetic field magnitudes. However, the EMDEX Lite underestimates maximum exposures when compared to the MW III.

Electromagnetic Fields↗

PubMedDate not supplied

Surface area of respirable beryllium metal, oxide, and copper alloy aerosols and implications for assessment of exposure risk of chronic beryllium disease.

The continued occurrence of chronic beryllium disease (CBD) suggests the current occupational exposure limit of 2 microg beryllium per cubic meter of air does not adequately protect workers. This study examined the morphology and measured the particle surface area of aerodynamically size-separated powders and process-sampled particles of beryllium metal, beryllium oxide, and copper-beryllium alloy. The beryllium metal powder consisted of compact particles, whereas the beryllium oxide powder and particles were clusters of smaller primary particles. Specific surface area (SSA) results for all samples (N=30) varied by a factor of 37, from 0.56 +/- 0.07 m(2)/g (for the 0.4-0.7 microm size fraction of the process-sampled reduction furnace particles) to 20.8 +/- 0.4 m(2)/g (for the </=0.4 microm size fraction of the metal powder). Large relative differences in SSA were observed as a function of particle size for the powder of beryllium metal, from 4.0 +/- 0.01 m(2)/g (for the particle size fraction >6 microm) to 20.8 +/- 0.44 m(2)/g (for the particle size fraction </=0.4 microm). In contrast, little relative difference in SSA (<25%) was observed as a function of particle size for the beryllium oxide powder and particles collected from the screening operation. The SSA of beryllium metal powder decreases with increasing particle size, as expected for compact particles, and the SSA of the beryllium oxide powders and particles remains constant as a function of particle size, which might be expected for clustered particles. These associations illustrate how process-related factors can influence the morphology and SSA of beryllium materials. To avoid errors in predicting bioavailability of beryllium and the associated risks for CBD, the mechanisms of particle formation should be understood and the SSA of beryllium particles should be measured directly.

Aerosols↗