Search PubMed⌕ Search

Biomedical subjects

P Revilla-Ruiz

Publications and source records attributed to P Revilla-Ruiz.

4 recordsLinked to original sources

Determination of endocrine-disrupting compounds in cereals by pressurized liquid extraction and liquid chromatography-mass spectrometry. Study of background contamination.

A sensitive method based on pressurized liquid extraction (PLE) and liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) has been developed for the determination in cereal samples of seven endocrine-disrupting compounds: bisphenol A (BPA), 4-tert-butylbenzoic acid (BBA), 4-nonylphenol (NP), 4-tert-butylphenol (t-BP), 2,4-dichlorophenol (DCP), 2,4,5-trichlorophenol (TCP) and pentachlorophenol (PCP). For the PLE procedure, methanol was selected as the extraction solvent. An experimental design approach was applied to optimize other PLE parameters. The recoveries achieved for the all seven compounds were in the 81-104% range, with relative standard deviations of 4-9%. An additional preconcentration step, based on solid-phase extraction (SPE), after the PLE step proved to be a successful way for obtaining a more sensitive method. The detection limits achieved in corn breakfast cereals were in the 0.003-0.013 microg g(-1) range, except for BPA, with a detection limit of 0.043 microg g(-1), for a sample size of 2.5 g. These values are similar to or even lower than currently legislated limits for pesticides in cereals and cereal-based foodstuffs. We also investigated possible contamination during the experimental process by the target compounds released from purified water, plastics, syringes, peristaltic pump tubes, glassware and other laboratory materials in contact with the samples along the analytical process.

Analytic Sample Preparation Methods↗

Pressurized liquid extraction in the analysis of food and biological samples.

Originally, the use of the pressurized liquid extraction technique (PLE) was mainly focused on the extraction of environmental pollutants present in soil matrices, sediments, and sewage sludge. However, more recently the distinct advantages of this technique are being exploited in diverse areas, including biology, and the pharmaceutical and food industries. The aim of the present review is to explore recent analytical applications of this extraction technique (PLE) in the extraction of contaminant compounds and matrix components in food and biological samples, placing special emphasis on the strategies followed to obtain a rapid, selective, efficient and reliable extraction process.

Chromatography, Liquid↗

Determination of weakly acidic endocrine-disrupting compounds by liquid chromatography-mass spectrometry with post-column base addition.

A sensitive analytical method based on liquid chromatography-electrospray ionisation mass spectrometry (LC-ESI-MS) has been developed for the determination of seven endocrine-disrupting compounds: 4-n-nonylphenol (NP), 4-tert-butylphenol (t-BP), bisphenol A (BPA), 2,4-dichlorophenol (DCP), 2,4,5-trichlorophenol (TCP), pentachlorophenol (PCP) and 4-tert-butylbenzoic acid (BBA) in water samples. To achieve a good LC separation, acidification of the LC mobile phase was necessary, but this led to MS signal suppression for the less acidic compounds. In order to enhance the sensitivity for these analytes, post-column addition of different bases such as ammonia, trimethylamine, and 1,8-diazabicyclo-(5,4,0)undec-7-en (DBU) was evaluated. The post-column addition of base is proposed here to raise effluent pH, helping in the ionisation process of the compounds with higher pKa values (t-BP, BPA, DCP and NP). The use of DBU, diluted in MeOH, proved to be the most efficient post-column reagent for enhancing the MS signal. The signal-to-noise ratios for t-BP and NP increased by more than 200-fold and 35-fold, respectively, whereas for DCP and BPA an increase of about 10-fold was achieved. This strategy permitted direct determination of the seven compounds at low ppb levels. For application to real water samples, an extraction and preconcentration step using the solid-phase extraction (SPE) technique was carried out. The applicability of three solid-phase materials--Bond Elut C18, and two polymeric sorbents: LiChrolut EN and Oasis HLB--and the optimization of other SPE parameters such as the elution solvent and sample volume used, were studied in order to maximize extraction efficiency. Oasis HLB provided the best results, obtaining--with the proposed SPE procedure--satisfactory percentage recoveries for all compounds (70-110%) with the exception of NP, for which a recovery of 54% was achieved. Application of the whole method, SPE-LC-(ESI)-MS, to natural waters permitted low nanogram-per-liter determination of all seven compounds.

Acids↗

Solid-phase extraction and sample stacking-micellar electrokinetic capillary chromatography for the determination of multiresidues of herbicides and metabolites.

Micellar electrokinetic capillary chromatography (MEKC) with diode array detection was used for the separation of 13 compounds (eight herbicides widely used in agriculture: metribuzin, lenacil, ethofumesate, atrazine, terbutryn, isoproturon, chlorotoluron and linuron, and five of their principal degradation products; namely, deethylatrazine, 2-hydroxyatrazine, deethyl-2-hydroxyatrazine, deisopropylatrazine and 3-chloro-4-methylphenylurea). Peak separation for the 13 analytes was not successful when a single surfactant system was employed, neither sodium dodecyl sulfate (SDS) nor dioctyl sulfosuccinate (DOSS) sodium salt. However, a mixture of these herbicides was successfully separated using a mixed micellar system involving SDS-DOSS in less than 14 min. An application study of an on-line concentration technique for MEKC was carried out to enhance sensitivity. The optimized on-line stacking procedure consisted simply of the addition of 50 mM of sodium chloride to the injection sample, the stacking effect being more intensive as analyte polarity increased. When this stacking procedure was combined with an off-line sample preconcentration step, based on solid-phase extraction, analytes could be detected in the ppb range. The whole method was applied to ultra-high-quality and natural waters. Linear relationships between the analytical signal and the initial analyte concentration were found to be independent of the type of water, except for the more polar analytes for which small differences were observed.

Chromatography, Micellar Electrokinetic Capillary↗