Search PubMed⌕ Search

Biomedical subjects

P N Lipke

Publications and source records attributed to P N Lipke.

At least 19 recordsLinked to original sources

Delineation of functional regions within the subunits of the Saccharomyces cerevisiae cell adhesion molecule a-agglutinin.

a-Agglutinin from Saccharomyces cerevisiae is a cell adhesion glycoprotein expressed on the surface of cells of a mating type and consists of an anchorage subunit Aga1p and a receptor binding subunit Aga2p. Cell wall attachment of Aga2p is mediated through two disulfide bonds to Aga1p (Cappellaro, C., Baldermann, C., Rachel, R., and Tanner, W. (1994) EMBO J. 13, 4737-4744). We report here that purified Aga2p was unstable and had low molar specific activity relative to its receptor alpha-agglutinin. Aga2p co-expressed with a 149-residue fragment of Aga1p formed a disulfide-linked complex with specific activity 43-fold higher than Aga2p expressed alone. Circular dichroism of the complex revealed a mixed alpha/beta structure, whereas Aga2p alone had no periodic secondary structure. A 30-residue Cys-rich Aga1p fragment was partially active in stabilization of Aga2p activity. Mutation of either or both Aga2p cysteine residues eliminated stabilization of Aga2p. Thus the roles of Aga1p include both cell wall anchorage and cysteine-dependent conformational restriction of the binding subunit Aga2p. Mutagenesis of AGA2 identified only C-terminal residues of Aga2p as being essential for binding activity. Aga2p residues 45-72 are similar to sequences in soybean Nod genes, and include residues implicated in interactions with both Aga1p (including Cys(68)) and alpha-agglutinin.

Agglutinins↗

Systematic analysis of oxidative degradation of polysaccharides using PAGE and HPLC--MS.

Oxidation of polysaccharides yields hydroxyaldehydes and hydroxycarboxylic acids. Aldehydes and carboxylic acids were separately conjugated to 8-aminonaphthalene-1,3,6-trisulfonic acid (ANTS) or tyrosine t-butyl ester (TBT). The ANTS-labeled derivatives were separated by molecular size on PAGE gels and detected by fluorescence. TBT-labeled derivatives were separated by reverse phase chromatography on a C18-HPLC column and analyzed by positive ion electrospray mass spectroscopy (HPLC--MS). This combination of procedures allowed a systematic analysis of carbohydrate oxidation products.

Aldehydes↗

Environmentally induced reversible conformational switching in the yeast cell adhesion protein alpha-agglutinin.

The yeast cell adhesion protein alpha-agglutinin is expressed on the surface of a free-living organism and is subjected to a variety of environmental conditions. Circular dichroism (CD) spectroscopy shows that the binding region of alpha-agglutinin has a beta-sheet-rich structure, with only approximately 2% alpha-helix under native conditions (15-40 degrees C at pH 5.5). This region is predicted to fold into three immunoglobulin-like domains, and models are consistent with the CD spectra as well as with peptide mapping and site-specific mutagenesis. However, secondary structure prediction algorithms show that segments comprising approximately 17% of the residues have high alpha-helical and low beta-sheet potential. Two model peptides of such segments had helical tendencies, and one of these peptides showed pH-dependent conformational switching. Similarly, CD spectroscopy of the binding region of alpha-agglutinin showed reversible conversion from beta-rich to mixed alpha/beta structure at elevated temperatures or when the pH was changed. The reversibility of these changes implied that there is a small energy difference between the all-beta and the alpha/beta states. Similar changes followed cleavage of peptide or disulfide bonds. Together, these observations imply that short sequences of high helical propensity are constrained to a beta-rich state by covalent and local charge interactions under native conditions, but form helices under non-native conditions.

Algorithms↗

Interaction of alpha-agglutinin and a-agglutinin, Saccharomyces cerevisiae sexual cell adhesion molecules.

alpha-Agglutinin and a-agglutinin are complementary cell adhesion glycoproteins active during mating in the yeast Saccharomyces cerevisiae. They bind with high affinity and high specificity: cells of opposite mating types are irreversibly bound by a few pairs of agglutinins. Equilibrium and surface plasmon resonance kinetic analyses showed that the purified binding region of alpha-agglutinin interacted similarly with purified a-agglutinin and with a-agglutinin expressed on cell surfaces. At 20 degrees C, the K(D) for the interaction was 2 x 10(-9) to 5 x 10(-9) M. This high affinity was a result of a very low dissociation rate ( approximately 2.6 x 10(-4) s(-1)) coupled with a low association rate (= 5 x 10(4) M(-1) s(-1)). Circular-dichroism spectroscopy showed that binding of the proteins was accompanied by measurable changes in secondary structure. Furthermore, when binding was assessed at 10 degrees C, the association kinetics were sigmoidal, with a very low initial rate. An induced-fit model of binding with substantial apposition of hydrophobic surfaces on the two ligands can explain the observed affinity, kinetics, and specificity and the conformational effects of the binding reaction.

Agglutinins↗

A CD2-based model of yeast alpha-agglutinin elucidates solution properties and binding characteristics.

We have previously shown that the Saccharomyces cerevisiae cell adhesion protein alpha-agglutinin has sequence characteristics of immunoglobulin-like proteins and have successfully modeled residues 200-325, based on the structure of immunoglobulin variable-type domains. Alignments matching residues 20-200 of alpha-agglutinin with domains I and II of members of the CD2/CD4 subfamily of the immunoglobulin superfamily showed > 80% conservation of key residues despite low sequence similarity overall. Three-dimensional models of two alpha-agglutinin domains constructed on the basis of these alignments were shown to conform to peptide mapping data and biophysical properties of alpha-agglutinin. In addition, the residue volume and surface accessibility characteristics of these models resembled those of the well-packed structures of related proteins. Residue-by-residue analysis showed that packing and accessibility anomalies were largely confined to glycosylated and protease-susceptible loop regions of the domains. Surface accessibility of hydrophobic residues was typical of proteins with extensive domain interactions, a finding compatible with the hydrodynamic properties of alpha -agglutinin and the hydrophobic nature of binding to its peptide ligand alpha-agglutinin. The procedures used to align the alpha-agglutinin sequence and test the quality of the model may be applicable to other proteins, especially those that resist crystallization because of extensive glycosylation.

Algorithms↗

The spheroplast lysis assay for yeast in microtiter plate format.

A yeast lysis assay in the microtiter plate format improved precision and throughput and led to an improved algorithm for estimating lag time. The assay reproducibly revealed differences of 10% or greater in the maximal lysis rate and 50% or greater in the lag time. Clonal differences were determined to be the major source of variation. Microtiter-based assays should be useful for screening for drug susceptibility and for analyzing mutant phenotypes.

Cell Wall↗

A spheroplast rate assay for determination of cell wall integrity in yeast.

The rate of formation of spheroplasts of yeast can be used as an assay to study the structural integrity of cell walls. Lysis can be measured spectrophotometrically in hypotonic solution in the presence of Zymolyase, a mixture of cell wall-digesting enzymes. The optical density of the cell suspension decreases as the cells lyse. We optimized this assay with respect to enzyme concentration, temperature, pH, and growth conditions for several strains of Saccharomyces cerevisiae. The level of variability (standard deviation) was 1-5% between trials where the replications were performed on the same culture using enzyme prepared from the same lot, and 5-15% for different cultures of the same strain. This assay can quantitate differences in cell wall structure (1) between exponentially growing and stationary phase cells, (2) among different S. cerevisiae strains, (3) between S. cerevisiae and Candida albicans, (4) between parental and mutated lines, and (5) between drug- or chemically-treated cells and controls.

Anti-Bacterial Agents↗

Restrictive glycosylphosphatidylinositol anchor synthesis in cwh6/gpi3 yeast cells causes aberrant biogenesis of cell wall proteins.

We previously reported that the defects in the Saccharomyces cerevisiae cwh6 Calcofluor white-hypersensitive cell wall mutant are caused by a mutation in SPT14/GPI3, a gene involved in glycosylphosphatidylinositol (GPI) anchor biosynthesis. Here we describe the effect of cwh6/spt14/gpi3 on the biogenesis of cell wall proteins. It was found that the release of precursors of cell wall proteins from the endoplasmic reticulum (ER) was retarded. This was accompanied by proliferation of ER structures. The majority of the cell wall protein precursors that eventually left the ER were not covalently incorporated into the cell wall but were secreted into the growth medium. Despite the inefficient incorporation of cell wall proteins, there was no net effect on the protein level in the cell wall. It is postulated that the availability of GPI-dependent cell wall proteins determines the rate of cell wall construction and limits growth rate.

Amino Acid Sequence↗

Identification of a ligand-binding site in an immunoglobulin fold domain of the Saccharomyces cerevisiae adhesion protein alpha-agglutinin.

The Saccharomyces cerevisiae adhesion protein alpha-agglutinin (Ag alpha 1p) is expressed by alpha cells and binds to the complementary a-agglutinin expressed by a cells. The N-terminal half of alpha-agglutinin is sufficient for ligand binding and has been proposed to contain an immunoglobulin (Ig) fold domain. Based on a structural homology model for this domain and a previously identified critical residue (His292), we made Ag alpha 1p mutations in three discontinuous patches of the domain that are predicted to be in close proximity to His292 in the model. Residues in each of the three patches were identified that are important for activity and therefore define a putative ligand binding site, whereas mutations in distant loops had no effect on activity. This putative binding site is on a different surface of the Ig fold than the defined binding sites of immunoglobulins and other members of the Ig superfamily. Comparison of protein interaction sites by structural and mutational analysis has indicated that the area of surface contact is larger than the functional binding site identified by mutagenesis. The putative alpha-agglutinin binding site is therefore likely to identify residues that contribute to the functional binding site within a larger area that contacts a-agglutinin.

Amino Acid Sequence↗

Retention of Saccharomyces cerevisiae cell wall proteins through a phosphodiester-linked beta-1,3-/beta-1,6-glucan heteropolymer.

Yeast cell wall proteins, including Cwp1p and alpha-agglutinin, could be released by treating the cell wall with either beta-1,3-or beta-1,6-glucanases, indicating that both polymers are involved in anchoring cell wall proteins. It was shown immunologically that both beta-1,3- and beta-1,6-glucan were linked to yeast cell wall proteins, including Cwp1p and alpha-agglutinin. It was further shown that beta-1,3-glucan was linked to the wall protein through a beta-1,6-glucan moiety. The beta-1,6-glucan moiety could be removed from Cwp1p and other cell wall proteins by cleaving phosphodiester bridges either enzymatically using phosphodiesterases or chemically using ice-cold aqueous hydrofluoric acid. These observations are consistent with the notion that cell wall proteins in Saccharomyces cerevisiae are linked to a beta-1,3-/beta-1,6-glucan heteropolymer through a phosphodiester linkage and that this polymer is responsible for anchoring cell wall proteins. It is proposed that this polymer is identical to the alkali-soluble beta-1,3-/beta-1,6-glucan heteropolymer characterized by Fleet and Manners (1976, 1977).

Biopolymers↗

Structure of Saccharomyces cerevisiae alpha-agglutinin. Evidence for a yeast cell wall protein with multiple immunoglobulin-like domains with atypical disulfides.

alpha-Agglutinin of Saccharomyces cerevisiae is a cell wall-associated protein that mediates cell interaction in mating. Although the mature protein includes about 610 residues, the NH2-terminal half of the protein is sufficient for binding to its ligand a-agglutinin. alpha-Agglutinin20-351, a fully active fragment of the protein, has been purified and analyzed. Circular dichroism spectroscopy, together with sequence alignments, suggest that alpha-agglutinin20-351 consists of three immunoglobulin variable-like domains: domain I, residues 20-104; domain II, residues 105-199; and domain III, residues 200-326. Peptide sequencing data established the arrangement of the disulfide bonds in alpha-agglutinin20-351. Cys97 is disulfide-bonded to Cys114, forming an interdomain bond between domains I and II. Cys202 is bonded to Cys300, in an atypical intradomain disulfide bond between the A and F strands of domain III. Cys227 and Cys256 have free sulfhydryls. Sequencing also showed that at least two of three potential N-glycosylation sites with sequence Asn-Xaa-Thr are glycosylated. At least one of three Asn-Xaa-Ser sequences is not glycosylated. No residues NH2-terminal to Ser282 were O-glycosylated, whereas Ser282, and all hydroxy amino acid residues COOH-terminal to this position were modified. Therefore O-glycosylated Ser and Thr residues cluster in the COOH-terminal region of domain III, and the O-glycosylation continues into a Ser/Thr-rich sequence that extends from domain III to the COOH-terminal of the full-length protein.

Agglutinins↗

Genetics of a-agglutunin function in Saccharomyces cerevisiae.

The Saccharomyces cerevisiae cell adhesion protein a-agglutinin is composed of an anchorage subunit (Aga1p) and an adhesion subunit (Aga2p). Although functional a-agglutinin is expressed only by a cells, previous results indicated that AGA1 RNA is expressed in both a and alpha cells after pheromone induction. Expression of the Aga2p adhesion subunit in alpha cells allowed a-agglutinability, indicating that alpha cells express the a-agglutinin anchorage subunit, although no role for Aga1p in alpha cells has been identified. Most of the a-specific agglutination-defective mutants isolated previously were defective in AGA1; a single mutant (La199) was a candidate for an aga2 mutant. Expression of AGA2 under PGK control allowed secretion of active Aga2p from control strains but did not complement the La199 agglutination defect or allow secretion of Aga2p from La199, suggesting that the La199 mutation might identify a new gene required for a-agglutinin function. However, the La199 agglutination defect showed tight linkage to aga2::URA3 and did not complement aga2::URA3 in a/a diploids. The aga2 gene cloned from La199 was nonfunctional and contained an ochre mutation. The inability of pPGK-AGA2 to express functional Aga2p in La199 was shown to result from an additional mutation(s) that reduces expression of plasmid-borne genes. AGA2 was mapped to the left arm of chromosome VII approximately 28 cM from the centromere.

Base Sequence↗

Homology modeling of an immunoglobulin-like domain in the Saccharomyces cerevisiae adhesion protein alpha-agglutinin.

The Saccharomyces cerevisiae adhesion protein alpha-agglutinin is expressed by cells of alpha mating type. On the basis of sequence similarities, alpha-agglutinin has been proposed to contain variable-type immunoglobulin-like (IgV) domains. The low level of sequence similarity to IgV domains of known structure made homology modeling using standard sequence-based alignment algorithms impossible. We have therefore developed a secondary structure-based method that allowed homology modeling of alpha-aggulutinin domain III, the domain most similar to IgV domains. The model was assessed and where necessary refined to accommodate information obtained by biochemical and molecular genetic approaches, including the positions of a disulfide bond, glycosylation sites, and proteolytic sites. The model successfully predicted surface exposure of glycosylation and proteolytic sites, as well as identifying residues essential for binding activity. One side of the domain was predicted to be covered by carbohydrate residues. Surface accessibility and volume packing analyses showed that the regions of the model that have greatest sequence dissimilarity from the IgV consensus sequence are poorly structured in the biophysical sense. Nonetheless, the utility of the model suggests that these alignment and testing techniques should be of general use for building and testing of models of proteins that share limited sequence similarity with known structures.

Agglutinins↗

Glycosyl phosphatidylinositol-dependent cross-linking of alpha-agglutinin and beta 1,6-glucan in the Saccharomyces cerevisiae cell wall.

The cell adhesion protein alpha-agglutinin is bound to the outer surface of the Saccharomyces cerevisiae cell wall and mediates cell-cell contact in mating. alpha-Agglutinin is modified by addition of a glycosyl phosphatidylinositol (GPI) anchor as it traverses the secretory pathway. The presence of a GPI anchor is essential for cross-linking into the wall, but the fatty acid and inositol components of the anchor are lost before cell wall association (Lu, C.-F., J. Kurjan, and P. N. Lipke, 1994. A pathway for cell wall anchorage of Saccharomyces cerevisiae alpha-agglutinin. Mol. Cell. Biol. 14:4825-4833). Cell wall association of alpha-agglutinin was accompanied by an increase in size and a gain in reactivity to antibodies directed against beta 1,6-glucan. Several kre mutants, which have defects in synthesis of cell wall beta 1,6-glucan, had reduced molecular size of cell wall alpha-agglutinin. These findings demonstrate that the cell wall form of alpha-agglutinin is covalently associated with beta 1,6-glucan. The alpha-agglutinin biosynthetic precursors did not react with antibody to beta 1,6-glucan, and the sizes of these forms were unaffected in kre mutants. A COOH-terminal truncated form of alpha-agglutinin, which is not GPI anchored and is secreted into the medium, did not react with the anti-beta 1,6-glucan. We propose that extracellular cross-linkage to beta 1,6-glucan mediates covalent association of alpha-agglutinin with the cell wall in a manner that is dependent on prior addition of a GPI anchor to alpha-agglutinin.

Antibodies↗

Identification of six complementation classes involved in the biosynthesis of glycosylphosphatidylinositol anchors in Saccharomyces cerevisiae.

Glycosylphosphatidylinositol (GPI)-anchored membrane proteins are synthesized by the posttranslational attachment of a preformed glycolipid to newly made glycoproteins. alpha-Agglutinin is a GPI-anchored glycoprotein that gets expressed at the cell surface of MAT alpha cells after induction with type a mating factor. Mutants affecting the biosynthesis of GPI anchors were obtained by selecting for the absence of alpha-agglutinin from the cell wall after induction with a-factor at 37 degrees C. 10 recessive mutants were grouped into 6 complementation classes, gpi4 to gpi9. Mutants are considered to be deficient in the biosynthesis of GPI anchors, since each mutant accumulates an abnormal, incomplete GPI glycolipid containing either zero, two, or four mannoses. One mutant accumulates a complete precursor glycolipid, suggesting that it might be deficient in the transfer of complete precursor lipids to proteins. When labeled with [2-3H]inositol, mutants accumulate reduced amounts of radiolabeled GPI-anchored proteins, and the export of the GPI-anchored Gas1p out of the ER is severely delayed in several mutant strains. On the other hand, invertase and acid phosphatase are secreted by all but one mutant. All mutants show an increased sensitivity to calcofluor white and hygromycin B. This suggests that GPI-anchored proteins are required for the integrity of the yeast cell wall.

Glycosylation↗

Oxidative cell wall damage mediated by bleomycin-Fe(II) in Saccharomyces cerevisiae.

Bleomycin mediates cell wall damage in the yeast Saccharomyces cerevisiae. Bleomycin treatments in the presence of Fe(II) increased the rate of spheroplast formation by lytic enzymes by 5- to 40-fold. Neither Fe(III) nor other tested ions caused significant cell wall damage in the presence of bleomycin. The effect of bleomycin-Fe(II) on the cell wall mimicked the characteristics of bleomycin-Fe(II)-mediated DNA damage in dependence on aeration, inhibition by ascorbate, and potentiation by submillimolar concentrations of sodium phosphate. Bleomycin-mediated cell wall damage was time and dose dependent, with incubations as short as 20 min and drug concentrations as low as 3.3 x 10(-7)M causing measurable cell wall damage in strain CM1069-40. These times and concentrations are within the range of effectiveness for bleomycin-mediated DNA damage and for the cytotoxicity of the drug. Although Fe(III) was inactive with bleomycin and O2, the bleomycin-Fe(III) complex damaged walls and lysed cells in the presence of H2O2. H2O2 causes similar activation of bleomycin-Fe(III) in assays of DNA scission. These results suggest that an activated bleomycin-Fe-O2 complex disrupts essential cell wall polymers in a manner analogous to bleomycin-mediated cleavage of DNA.

Bleomycin↗