Biomedical subjects

P N De Aza

Publications and source records attributed to P N De Aza.

11 recordsLinked to original sources

PubMed2004

In vitro bioactivity of laser ablation pseudowollastonite coating.

Pseudowollastonite (psW) coatings on titanium alloys substrates were prepared by laser ablation and immersed in simulated body fluid (SBF) for different periods in order to investigate the nucleation and growth of hydroxyapatite (HA)-like formation on their surface. The structure of the coatings before soaking was analysed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The interfacial reactions product was examined by thin-film XRD, SEM and transmission electron microscopy at low and high resolution level, both fitted with energy-dispersive X-ray spectroscopy. Additional changes in ionic concentration, using inductively couple plasma atomic emission spectroscopy, were determined as well as pH right at the psW-coatings/SBF interface using an ion-sensitive field effect transistor. The solution composition changes, increasing the Ca(2+) and Si(4+) concentration and pH as a function of the soaking time while HPO(4)(2-) decreased. The results obtained showed that the coating surfaces were covered by HA-like, which indicated that the psW-coating possesses good bioactivity and also suggested that the mechanism of HA-like layer formation in SBF was similar to that showed in in vitro test by other silica-based materials.

Alloys↗

PubMed2003

Mechanism of bone-like formation on a bioactive implant in vivo.

The physical and chemical nature of the remodelled interface between the porous A3 glass-ceramic, composed of (wt%): SiO(2) = 54.5; CaO = 15.0; Na(2)O = 12.0; MgO = 8.5; P(2)O(5) = 6.0 K(2)O = 4.0, and the surrounding bone was studied after implantation into rat tibias. The interfaces which developed new bone layer in direct contact with the implants were examined by analytical scanning and transmission electron microscopy after implantation for 6, 8 and 12 weeks. Degradation processes of the implants also encouraged osseous tissue ingrowths into the pores of the material, changing drastically the macro- and microstructure of the implants. The ionic exchange initiated at the implant interface with the physiological environment was essential in the integration process of the implant, through a dissolution-precipitation-transformation mechanism. The interfaces developed non-toxic biological and chemical activities and remained reactive over the 12-week implantation period. These findings were significant as indicative of morphological and chemical integration of the A3 glass-ceramic into the structure of living bone tissue. A3 glass-ceramic could be suitable for the repair or replacement of living bone.

Animals↗

PubMed2003

Indirect cytotoxicity evaluation of pseudowollastonite.

This study aimed to evaluate the cytotoxicity of substances leached by pseudowollastonite (CaSiO(3)). It has been previously shown that calcium (Ca(2+)) and silicate (SiO(3)(-)) ions are released from pseudowollastonite into biological solutions. Both of these ions are known to influence the biological metabolism of osteoblastic cells essential in the mineralization process and bone-bonding mechanism. The indirect toxicity evaluation was performed by extraction method, according to International Standard Organization (ISO). Pseudowollastonite pellets obtained by solid-state reaction were incubated, in culture medium, during 24, 48, 72 or 168 h at different concentrations (5, 10, 15, 50, 100, 200 mg/ml). The cytotoxicity of each extract in presence of human osteoblastic cell line (SaOS-2) was quantitatively assessed by measuring the viability (succinate dehydrogenase activity, MTT), the membrane integrity (the uptake of the neutral red by viable cells, NR) as well as the cell necrosis by measuring the lactate dehydrogenase (LDH) released in the culture medium. No significant alteration of membrane integrity or cell suffering was detectable. However, increased cell metabolism was observed for cells exposed to pseudowollastonite extract with longest extraction time (168 h). In conclusion, mineral elements leached by pseudowollastonite do not significantly affect the metabolism of osteoblastic cells.

Journal Article↗

PubMed2003

Effect of glass-ceramic microstructure on its in vitro bioactivity.

Two routes were used to obtain a glass-ceramic composed of 43.5 wt % SiO(2) - 43.5 wt % CaO - 13 wt % ZrO(2). Heat treatment of a glass monolith produced a glass-ceramic (WZ1) containing wollastonite-2M and tetragonal zirconia as crystalline phases. The WZ1 did not display bioactivity in vitro. Ceramizing the glass via powder technology routes formed a bioactive glass-ceramic (WZ2). The two glass-ceramics, WZ1 and WZ2, were composed of the same crystalline phases, but differed in microstructure. The in vitro studies carried out on WZ2 showed the formation of an apatite-like layer on its surface during exposure to a simulated body fluid. This paper examined the influence of both chemical and morphological factors on the in vitro bioactivitity. The interfacial reaction product was examined by scanning and transmission electron microscopy. Both instruments were fitted with energy-dispersive X-ray analyzers. Measurements of the pH made directly at the interface of the two glass-ceramics were important in understanding their different behavior during exposure to the same physiological environment.

Journal Article↗

PubMed2002

Pulsed laser deposition of pseudowollastonite coatings.

Pseudowollastonite (alpha-CaSiO3) is a bioactive ceramic material that induces direct bone growth. A process to obtain pseudowollastonite coatings that may be applied to implants is described and evaluated in this work. The coatings were first deposited on titanium alloy by laser ablation with a pulsed Nd:YAG laser tripled in frequency. After deposition, they were submitted to a soft laser treatment with a continuous wave Nd:YAG infrared laser. Coatings were characterised by X-ray diffractometry, Raman spectroscopy, scanning electron microscopy and energy dispersive spectroscopy before and after the laser treatment. As-deposited coatings are composed of pseudowollastonite and amorphous material. They have a porous structure of gathered grains and poor cohesion. After the laser treatment the coatings crystallinity and cohesion are improved. The laser treatment also makes the coatings dense and well adhered to the substrate. Therefore, this two-step process has been demonstrated as a valuable method to coat titanium implants with pseudowollastonite.

Bone Substitutes↗

PubMed2001

Transmission electron microscopy of the interface between bone and pseudowollastonite implant.

This paper reports on the structural morphology of the interface in vivo between implants composed of bioactive synthetic pseudowollastonite ceramic and bone in rat tibias. Thin sections of the interfaces were examined after 6 and 8 weeks of implantation period in a high resolution transmission electron microscope up to the lattice plane resolution level. The interfaces developed normal biological and chemical activities and remained reactive over the 8-week period. The regions showing direct bone tissue bonding to the implant contained nanocrystals of hydroxyapatite-like phase growing epitaxially across the interface in the [002] direction. The nanocrystals were also identified in the bone tissue formed in the interfacial area. The reactivity of the implant caused in the first instance formation of an amorphous woven type of bone, which transformed into a crystalline lamellar type containing collagen fibres. The Ca/P ratio of the interfacial region was found to be between 1.67 in the mature bone tissue formed about 5 microm from the interface, and 2.06 in the regions right at the interface.

Animals↗

PubMed2000

Reactivity of a wollastonite-tricalcium phosphate Bioeutectic ceramic in human parotid saliva.

In a previous study, a new ceramic material (Bioeutectic), prepared by slow solidification through the eutectic temperature region of the wollastonite-tricalcium phosphate system, was found to be reactive in a simulated body fluid. In the present study, the reactivity of the Bioeutectic was assessed in human parotid saliva. Samples of the material were soaked for one month in human parotid saliva at 37 degrees C. The experiments showed the formation of two separate zones of carbonate-hydroxyapatite-like phase on the periphery of the samples. The first zone was formed by reaction of the bioeutectic with the saliva and progressed inside the material. The other zone developed on the surface of the bioeutectic by precipitation from the media. The mechanism of carbonate-hydroxyapatite-like phase formation in human parotid saliva appeared to be similar to that of apatite-like phase found in a simulated body fluid.

Apatites↗

PubMed2000

Morphological and structural study of pseudowollastonite implants in bone.

In vitro experiments show that pseudowollastonite (alpha-CaSiO3) is a highly bioactive material that forms a hydroxyapatite surface layer on exposure to simulated body fluid and also to human parotid saliva. This finding is very significant, as it indicates that the pseudowollastonite can be physically and chemically integrated into the structure of living bone tissue, and therefore could be suitable for repair or replacement of living bone. The physical and chemical nature of the remodelled interface between the pseudowollastonite implants and the surrounding bone has been studied after in vivo implantation of 20 pseudowollastonite cylinders into rat tibias. The interfaces formed after 3, 6, 8 and 12 weeks of implantation were examined histologically using an optical microscope and also by analytical scanning electron microscopy. SEM and X-ray elemental analysis showed that the new bone was growing in direct contact with the implants. Other examinations found that the bone was fully mineralized. The ionic exchange taking place at the implant interface with the body fluids was essential in the process of the implant integration through a dissolution-precipitation-transformation mechanism. The study found the interface biologically and chemically active over the 12-week implantation period. The rate of new bone formation decreased after the first 3 weeks and reached constant value over the following 9 weeks. The osteoblastic cells migrated towards the interface and colonized the surface at the contact areas with the cortical regions and also bone marrow.

Animals↗

PubMed1999

Bioactivity of pseudowollastonite in human saliva.

OBJECTIVES: Pseudowollastonite (CaO.SiO2) was found to be bioactive in a simulated body fluid environment. In the present study, 'in vitro' bioactivity of pseudowollastonite was further assessed in human parotid saliva. The main objective was to compare behaviour of the material in a natural medium of high protein content (human parotid saliva) with its behaviour in an acellular protein-free solution (simulated body fluid). METHODS: Samples of polycrystalline pseudowollastonite were immersed for one month in human parotid saliva at 37 degrees C. Changes in ionic concentrations in the human parotid saliva and the pH right at the interface of pseudowollastonite/human parotid saliva were determined. The products of the interfacial reactions were studied by thin-film X-ray diffraction, scanning and transmission electron microscopy. RESULTS: The results confirmed formation of a hydroxyapatite-like layer on the surface of the material, and also suggested that the mechanism of hydroxyapatite-like layer formation in saliva was similar to that showed in simulated body fluid. CONCLUSIONS: The hydroxyapatite-like layer formed at the interface was found to be compact, continuous and composed of many small crystallites with ultrastructure similar to that of natural cortical bone and dentine. The study also concluded that the high pH conditions (10.32) existing right at the pseudowollastonite/human parotid saliva interface promoted hydroxyapatite-like precipitation. At this stage of the study, similarities of the material behaviour in saliva and acellular simulated body fluid suggest that the pseudowollastonite could be of interest in specific periodontal applications for bone restorative purposes.

Body Temperature↗

PubMed1998

Analytical control of wollastonite for biomedical applications by use of atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry.

Preliminary in vitro experiments revealed that wollastonite (CaSiO3) is a potentially highly bioactive material that forms a hyroxyapatite (HA) surface layer on exposure to simulated body fluid with an ion concentration, pH and temperature virtually identical with those of human blood plasma. The formation of the HA layer is an essential requirement for an artificial material to be used as bioactive bone substitute. This finding opens up a wide field for biomedical applications of wollastonite. Biomaterials used as implants in the human body require strict control of trace elements and of the toxic species specified in American Society for Testing and Materials F-1185-88 (As, Cd, Hg and Pb) in ceramic hydroxyapatite for surgical implantation. In this work, two types of pseudowollastonite, the high temperature form of wollastonite, were analysed by using cold vapour atomic absorption spectrometry and hydride generation atomic absorption spectrometry, in order to determine the elements stated in the above-mentioned norm, and inductively coupled plasma atomic emission spectrometry to establish the SiO2/CaO ratio of the two materials and analyse for all other impurities introduced by the raw materials and by the processes of synthesis, sintering and grinding. Barium and Mg were especially prominent in raw materials, and Zr, Y, Mg, W, Co and Ni come mainly from the processing.

Barium↗

PubMed1997

Bioeutectic: a new ceramic material for human bone replacement.

In the present work, a new way of obtaining bioactive ceramic materials with eutectic morphology is presented. To this purpose the binary system wollastonite-tricalcium phosphate was selected, taking into account the different bioactivity behaviour of both phases. The material is formed by quasi-spherical colonies composed of alternating radial lamellae of wollastonite and tricalcium phosphate. In in vitro experiments the material presents a high reactivity, with the formation of two well-differentiated zones of hydroxyapatite, one formed by alteration of the eutectic material with solution of the wollastonite into the simulated body fluid and subsequent pseudomorphic transformation of the tricalcium phosphate into hydroxyapatite, and the other, in the last stages of the experiments, by deposition of hydroxyapatite onto the surface of the material. The hydroxyapatite morphology, formed at the beginning of the reaction, is similar to that of porous bone. The method used opens the opportunity to develop a new family of bioactive materials with different constituents, binary or ternary, for which the authors propose the general name of bioeutectics.

Biocompatible Materials↗