Search PubMed⌕ Search

Biomedical subjects

P Carninci

Publications and source records attributed to P Carninci.

33 records · Page 2Linked to original sources
PubMed1999

Increased specificity of reverse transcription priming by trehalose and oligo-blockers allows high-efficiency window separation of mRNA display.

We have developed a method for high-efficiency window separation of cDNA display by increasing the specificity of priming in reverse transcription. In the conventional method, two-base anchored oligo(dT) primers (5'dT16VN3', where N is any base and V is G, A or C) are used to make windows for the display of transcripts. However, reverse transcriptase often extends misprimed oligonucleotides. To avoid mispriming from dT16VN primers, we have developed two new technologies. One is higher temperature priming with reverse transcriptase thermoactivated by the disaccharide trehalose. The other is the use of competitive oligonucleotide blockers that hybridize to the non-selectively primed mRNAs, preventing the mispriming from the VN site. These methods were combined to improve restriction landmark cDNA scanning (RLCS), resulting in the elimination of the redundant signals that appear in different windows. This was achieved by the increased specificity of initiation of reverse trans-cription from the beginning of poly(A) sites. This method paves the way for the precise visualization of transcripts to allow expression profiles in individual tissues and at each developmental stage to be understood.

Animals↗
PubMed1999

Automated filtration-based high-throughput plasmid preparation system.

Current methods of plasmid preparation do not allow for large capacity automated processing. We have developed an automated high-throughput system that prepares plasmid DNA for large-scale sequencing. This system is based on our previously reported filtration method. In this method, cell harvesting, alkaline lysis, and plasmid purification occur in a single 96-well microtiter plate from which sequence-ready DNA samples are collected. The plates are designed to allow all reagents to be injected from above the wells and the spent reagents to be aspirated from below. This design has enabled us to build a linear process plasmid preparation system consisting of an automated filter plate stacker and a 21-stage automated plasmid preparator. The 96-well plates used are outfitted with glass-filters that trap Escherichia coli before the plates are stacked in the automated stacker. The plates move from the stacker to each of the 21 stages of the preparator. At specific stages, various reagents or chemicals are injected into the wells from above. Finally, the plates are collected in the second stacker. The optimal throughput of the preparator is 40,000 samples in 17.5 hr. Here, we describe a pilot experiment preparing 15,360 templates in 160 specially designed 96-well glass-filter plates. The prepared plasmids were subjected to restriction digestion, DNA sequencing, and transcriptional sequencing.

Base Sequence↗
PubMed1998

Characterization of gene expression in mouse blastocyst using single-pass sequencing of 3995 clones.

To study the gene expression profile in the mouse blastocyst and to identify embryonic stage-specific genes, we randomly selected cDNAs derived from mouse blastocysts and sequenced a total of 3995 clones from one or both ends. Excluding the uninformative clones, 3395 clones were grouped as 937 different kinds of genes. Among these, 465 and 406 species showed similarity to known genes and expressed sequence tags (ESTs), respectively, whereas 66 species showed no significant similarity to any genes in known databases. Analysis of these cDNAs revealed that this library contained a variety of functional genes as well as genes that have not been detected in the human EST database; it should provide us with a useful resource for molecular analysis of developmental mechanisms. Although the human EST project is considered to represent roughly half of all genes, our findings indicate that many early stage developmental genes remain to be identified.

Animals↗
PubMed1998

Transcriptional sequencing: A method for DNA sequencing using RNA polymerase.

We have developed a sequencing method based on the RNA polymerase chain termination reaction with rhodamine dye attached to 3'-deoxynucleoside triphosphate (3'-dNTP). This method enables us to conduct a rapid isothermal sequencing reaction in <30 min, to reduce the amount of template required, and to do PCR direct sequencing without the elimination of primers and 2'-dNTP, which disturbs the Sanger sequencing reaction. An accurate and longer read length was made possible by newly designed four-color dye-3'-dNTPs and mutated RNA polymerase with an improved incorporation rate of 3'-dNTP. This method should be useful for large-scale sequencing in genome projects and clinical diagnosis.

DNA↗
PubMed1998

Thermostabilization and thermoactivation of thermolabile enzymes by trehalose and its application for the synthesis of full length cDNA.

The advent of thermostable enzymes has led to great advances in molecular biology, such as the development of PCR and ligase chain reaction. However, isolation of naturally thermostable enzymes has been restricted to those existing in thermophylic bacteria. Here, we show that the disaccharide trehalose enables enzymes to maintain their normal activity (thermostabilization) or even to increase activity at high temperatures (thermoactivation) at which they are normally inactive. We also demonstrate how enzyme thermoactivation can improve the reverse transcriptase, reaction. In fact, thermoactivated reverse transcriptase, which displays full activity even at 60 degrees C, was powerful enough to synthesize full length cDNA without the early termination usually induced by stable secondary structures of mRNA.

DNA, Complementary↗
PubMed1998

High-efficiency cloning of Arabidopsis full-length cDNA by biotinylated CAP trapper.

Full-length cDNAs are essential for functional analysis of plant genes. We constructed high-content, full-length cDNA libraries from Arabidopsis thaliana plants based on chemical introduction of a biotin group into the diol residue of the CAP structure of eukaryotic mRNA, followed by RNase I treatment, to select full-length cDNA. More than 90% of the total clones obtained were of full length; recombinant clones were obtained with high efficiency (2.2 x 10(6)/9 micrograms starting mRNA). Sequence analysis of 111 randomly picked clones indicated that 32 isolated cDNA groups were derived from novel genes in the A. thaliana genome.

Arabidopsis↗
PubMed1997

A novel control system for polymerase chain reaction using a RIKEN GS384 thermalcycler.

We have developed a novel high-throughput thermalcycler, the RIKEN GS384, which has a maximum of 1536 wells and whose temperature can be controlled accurately and simultaneously for a very small volume of a reaction mixture. In practice, the reaction is carried out using four 384-well (3.5 mm in diameter) plate formats which can be automatically moved using a robotic arm. To achieve accurate temperature control with high thermo-conductivity, we adopted Teflon-coated aluminum well plates closely sandwiched between silicon sheet-covered lids on top and a graphite sheet below. The lids were kept at a higher temperature (2 to 5 degrees C) than the reaction wells. The temperature of the 1536 sample wells was controlled accurately without temperature variability among the wells or evaporation, even for samples of very small volume (minimum 2 microliters). We also developed a new type of plate format which is similar to the 384-well place in terms of plate size, shape, and material, but which differs in the number (1536) and size (1.6 mm in diameter) of the wells. Since the amplification reactions could be done precisely as well, a total of 6144 reactions can potentially be carried out simultaneously using the GS384 thermalcycler. This is very promising for DNA microfabrication technology. This thermalcycler offers the advantage of high-throughput DNA analysis which should be useful for DNA diagnoses or for the human genome project.

Humans↗
PubMed1997

Simple and rapid preparation of plasmid template by a filtration method using microtiter filter plates.

We developed a new simple high-throughput plasmid DNA extraction procedure, based on a modified alkaline lysis method, using only one 96-well microtiter glassfilter plate. In this method, cell harvesting, lysis by alkaline and plasmid purification are performed on only one microtiter glassfilter plate. After washing out RNAs or other contaminants, plasmid DNA is eluted by low-ion strength solution, although precipitated chromosomal DNA is not eluted. The plasmid prepared by this method can be applied to sequencing reactions or restriction enzyme cleavage.

Animals↗
PubMed1997

High efficiency selection of full-length cDNA by improved biotinylated cap trapper.

We report here an improved protocol for the preparation of full-length cDNA libraries that improves the previously reported method (Carninci, P., Kvam, K., Kitamura, A. et al. 1996, Genomics, 137, 327-336), that allows long cDNAs to be cloned more efficiently. One potential disadvantage of the original biotinylated CAP trapper protocol is the exposure of mRNA to chemical and enzymatic attacks during the biotinylation of the cap structure, before the first-strand cDNA synthesis (and selection of full-length cDNA by biotinylated cap). Here, we show that the biotinylation of the cap structure is very specific and effective even if biotinylation is performed on the mRNA/cDNA hybrid produced by the first-strand cDNA synthesis reaction. Consequently, mRNA remains protected from chemical and enzymatic degradation during the overnight biotinylation step, thus making it possible to select full-length cDNAs of longer average size. We herein report the efficiency and specificity of the new version of the protocol for cap structure biotinylation and capture of full-length cDNA.

Animals↗
PubMed1996

High-efficiency full-length cDNA cloning by biotinylated CAP trapper.

We have devised a method for efficiently constructing high-content full-length cDNA libraries based on chemical introduction of a biotin group into the diol residue of the cap structure of eukaryotic mRNA, followed by RNase I treatment to select full-length cDNA. The selection occurs by trapping the biotin residue at the cap sites using streptavidin-coated magnetic beads, thus eliminating incompletely synthesized cDNAs. When this method was used to construct a mouse brain full-length cDNA library, our evaluation showed that more than 95% of the total clones were of full length, and recombinant clones could be produced with high efficiency (1.2 x 10(7)/10 micrograms starting mRNA). The analysis of 120 randomly picked clones indicates an unbiased representation of the starting mRNA population.

Animals↗
PubMed1995

A discontinuous buffer system increasing resolution and reproducibility in DNA sequencing on high voltage horizontal ultrathin-layer electrophoresis.

A novel discontinuous buffer system for DNA sequencing based on horizontal ultrathin-layer gel electrophoresis is described. The optimized system, named unbuffered stacking gel/discontinuous borate EDTA-buffer system, is composed of a 0.5 mm thick stacking gel, where standard sequencing reactions (1 microL volume) are easily loaded, and a 50 microns ultrathin running gel, where DNA fragments are separated. The novel discontinuous buffer system allows for sample concentration and efficient injection from the stacking gel into the capillary slab gel. Increased resolution, assessed by autoradiography, can be achieved within 25 min running time already over a 10.1 cm distance from the gel slot compared to the conventional gel system. An advantage of the new system is the capacity to resolve compressions in GC-rich regions, usually causing migrating artifacts in standard gels. The described system affords a major improvement in speed, resolution and reproducibility in DNA sequencing.

Autoradiography↗