Biomedical subjects

P Balaram

Publications and source records attributed to P Balaram.

At least 55 records · Page 3Linked to original sources

PubMed2000

Conformational choice at alpha,alpha-di-n-propylglycine residues: helical or fully extended structures?

The conformational analysis of peptides containing a single alpha, alpha-di-n-propylglycine (Dpg) residue incorporated into valine-rich sequences has been undertaken in order to delineate the possible role of sequence effects in stabilizing fully extended (C(5)) or local helical conformations at this residue. The three peptides Boc-Val-Dpg-Val-OMe (3), Boc-Val-Val-Dpg-Val-OMe (4), Boc-Val-Val-Dpg-Val-Val-OMe (5), have been studied by (1)H-nmr methods in chloroform (CDCl(3)) and dimethylsulfoxide (DMSO) solutions. Even in a relatively poorly solvating medium like CDCl(3), all the valine NH groups appear to be solvent-exposed, suggesting an absence of folded beta-turn conformations. However, in both CDCl(3) and DMSO the Dpg NH groups in all the three peptides appear to behave like apparently solvent-inaccessible groups. In fully extended C(5) conformations, the proximity of the NH and CO groups of Dpg may preclude effective solvation due to a combination of stereoelectronic factors. Nuclear Overhauser effects provide support for the largely extended backbones. The crystal structure of peptide 3 reveals an extended conformation at Dpg (2) with straight phi = -176 degrees, psi = 180 degrees. A correlation between the crystallographically observed backbone conformation and solution nmr parameters in DMSO has been attempted using available data. Dpg residues placed in poor helix stabilizing environments may be expected to favor a local C(5) conformation.

Amino Acid Sequence↗

PubMed2000

Context-dependent conformation of diethylglycine residues in peptides.

Diethylglycine (Deg) residues incorporated into peptides can stabilize fully extended (C5) or helical conformations. The conformations of three tetrapeptides Boc-Xxx-Deg-Xxx-Deg-OMe (Xxx=Gly, GD4; Leu, LD4 and Pro, PD4) have been investigated by NMR. In the Gly and Leu peptides, NOE data suggest that the local conformations at the Deg residues are fully extended. Low temperature coefficients for the Deg(2) and Deg(4) NH groups are consistent with their inaccessibility to solvent, in a C5 conformation. NMR evidence supports a folded beta-turn conformation involving Deg(2)-Gly(3), stabilized by a 4-->1 intramolecular hydrogen bond between Pro(1) CO and Deg(4) NH in the proline containing peptide (PD4). The crystal structure of GD4 reveals a hydrated multiple turn conformation with Gly(1)-Deg(2) adopting a distorted type II/II' conformation, while the Deg(2)-Pro(3) segment adopts a type III/III' structure. A lone water molecule is inserted into the potential 4-->1 hydrogen bond of the Gly(1)-Deg(2) beta-turn.

Amino Acid Motifs↗

PubMed2000

Synthetic protein design: construction of a four-stranded beta-sheet structure and evaluation of its integrity in methanol-water systems.

The characterization of a four-stranded beta-sheet structure in a designed 26-residue peptide Beta-4 is described. The sequence of Beta-4 (Arg-Gly-Thr-Ile-Lys-(D)pro-Gly-Ile-Thr-Phe-Ala-(D)Pro-Ala-Thr-Val-Leu-P he-Ala-Val-(D)Pro-Gly-Lys-Thr-Leu-Tyr-Arg) was chosen such that three strategically positioned (D)Pro-Xxx segments nucleate type II' beta-turns, which facilitate hairpin extension. A four-stranded beta-sheet structure is determined in methanol from 500 MHz 1H NMR data using a total of 100 observed NOEs, 11 dihedral restraints obtained from vicinal JCalphaH-NH values and 10 hydrogen bonding constraints obtained from H/D exchange data. The observed NOEs provide strong evidence for a stable four-stranded sheet and a nonpolar cluster involving Ile8, Phe10, Val15 and Phe17. Circular dichroism studies in water-methanol mixtures provide evidence for melting of the beta-sheet structure at high water concentrations. NMR analysis establishes that the four-stranded sheet in Beta-4 is appreciably populated in 50% (v/v) aqueous methanol. In water, the peptide structure is disorganized, although the three beta-turn nuclei appear to be maintained.

Amino Acid Sequence↗

PubMed2000

Structural and thermodynamic consequences of introducing alpha-aminoisobutyric acid in the S peptide of ribonuclease S.

The S protein-S peptide interaction is a model system to study binding thermodynamics in proteins. We substituted alanine at position 4 in S peptide by alpha-aminoisobutyric acid (Aib) to investigate the effect of this substitution on the conformation of free S peptide and on its binding to S protein. The thermodynamic consequences of this replacement were studied using isothermal titration calorimetry. The structures of the free and complexed peptides were studied using circular dichroic spectroscopy and X-ray crystallography, respectively. The alanine4Aib replacement stabilizes the free S peptide helix and does not perturb the tertiary structure of RNase S. Surprisingly, and in contrast to the wild-type S peptide, the DeltaG degrees of binding of peptide to S pro, over the temperature range 5-30 degrees C, is virtually independent of temperature. At 25 degrees C, the DeltaDeltaG degrees, DeltaDeltaH degrees, DeltaDeltaS and DeltaDeltaCp of binding are 0.7 kcal/mol, 2.8 kcal/mol, 6 kcal/mol x K and -60 kcal/mol x K, respectively. The positive value of DeltaDeltaS is probably due to a decrease in the entropy of uncomplexed alanine4Aib relative to the wild-type peptide. The positive value of DeltaDeltaH: degrees is unexpected and is probably due to favorable interactions formed in uncomplexed alanine4Aib. This study addresses the thermodynamic and structural consequences of a replacement of alanine by Aib both in the unfolded and complexed states in proteins.

Amino Acid Substitution↗

PubMed2000

The role of polar and facial amphipathic character in determining lipopolysaccharide-binding properties in synthetic cationic peptides.

Two series of peptides, designated K and NK were synthesized and tested for lipid A binding and neutralizing properties. K2, which has an 11-residue amphiphilic core, and a branched N-terminus bearing two branched lysinyl residues does not bind lipid A, while NK2, also with an 11-residue amphiphilic core comprised entirely of non-ionizable residues, and a similarly branched, cationic N-terminus, binds lipid A very weakly. Both peptides do not inhibit lipopolysaccharide (LPS) activity in the Limulus assay, nor do they inhibit LPS-induced TNF-alpha and NO production in J774 cells. These results are entirely unlike a homologous peptide with an exclusively hydrophobic core whose LPS-binding and neutralizing properties are very similar to that of polymyxin B [David SA, Awasthi SK, Wiese A et al. Characterization of the interactions of a polycationic, amphiphilic, terminally branched oligopeptide with lipid A and lipopolysaccharide from the deep rough mutant of Salmonella minnesota. J Endotoxin Res 1996; 3: 369-379]. These data suggest that a clear segregation of charged and apolar domains is crucial in molecules designed for purposes of LPS sequestration and that head-tail (polar) orientation of the cationic/hydrophobic regions is preferable to molecules with mixed or facial cationic/amphipathic character.

Amino Acid Sequence↗

PubMed1999

Effect of amino acid substitutions at the subunit interface on the stability and aggregation properties of a dimeric protein: role of Arg 178 and Arg 218 at the Dimer interface of thymidylate synthase.

The significance of two interface arginine residues on the structural integrity of an obligatory dimeric enzyme thymidylate synthase (TS) from Lactobacillus casei was investigated by thermal and chemical denaturation. While the R178F mutant showed apparent stability to thermal denaturation by its decreased tendency to aggregate, the Tm of the R218K mutant was lowered by 5 degrees C. Equilibrium denaturation studies in guanidinium chloride (GdmCl) and urea indicate that in both the mutants, replacement of Arg residues results in more labile quaternary and tertiary interactions. Circular dichroism studies in aqueous buffer suggest that the protein interior in R218K may be less well-packed as compared to the wild type protein. The results emphasize that quaternary interactions may influence the stability of the tertiary fold of TS. The amino acid replacements also lead to notable alteration in the ability of the unfolding intermediate of TS to aggregate. The aggregated state of partially unfolded intermediate in the R178F mutant is stable over a narrower range of denaturant concentrations. In contrast, there is an exaggerated tendency on the part of R218K to aggregate in intermediate concentrations of the denaturant. The 3 A crystal structure of the R178F mutant reveals no major structural change as a consequence of amino acid substitution. The results may be rationalized in terms of mutational effects on both the folded and unfolded state of the protein. Site specific amino acid substitutions are useful in identifying specific regions of TS involved in association of non-native protein structures.

Arginine↗

PubMed1999

Unfolding of Plasmodium falciparum triosephosphate isomerase in urea and guanidinium chloride: evidence for a novel disulfide exchange reaction in a covalently cross-linked mutant.

The conformational stability of Plasmodium falciparum triosephosphate isomerase (TIMWT) enzyme has been investigated in urea and guanidinium chloride (GdmCl) solutions using circular dichroism, fluorescence, and size-exclusion chromatography. The dimeric enzyme is remarkably stable in urea solutions. It retains considerable secondary, tertiary, and quaternary structure even in 8 M urea. In contrast, the unfolding transition is complete by 2.4 M GdmCl. Although the secondary as well as the tertiary interactions melt before the perturbation of the quaternary structure, these studies imply that the dissociation of the dimer into monomers ultimately leads to the collapse of the structure, suggesting that the interfacial interactions play a major role in determining multimeric protein stability. The Cm(urea)/Cm(GdmCl) ratio (where Cm is the concentration of the denaturant required at the transition midpoint) is unusually high for triosephosphate isomerase as compared to other monomeric and dimeric proteins. A disulfide cross-linked mutant protein (Y74C) engineered to form two disulfide cross-links across the interface (13-74') and (13'-74) is dramatically destablized in urea. The unfolding transition is complete by 6 M urea and involves a novel mechanism of dimer dissociation through intramolecular thiol-disulfide exchange.

Animals↗

PubMed1999

Cavity-creating mutation at the dimer interface of Plasmodium falciparum triosephosphate isomerase: restoration of stability by disulfide cross-linking of subunits.

Disulfide engineering across subunit interfaces provides a means of inhibiting dissociation during unfolding of multimeric enzymes. Two symmetry-related intersubunit disulfide bridges were introduced across the interface of the dimeric enzyme triosephosphate isomerase from Plasmodium falciparum. This was achieved by mutating a tyrosine residue at position 74 at the subunit interface to a cysteine, thereby enabling it to form a covalent cross-link with a pre-existing cysteine at position 13 of the other subunit. The wild-type enzyme (TIMWT) and the oxidized (Y74Cox) and reduced (Y74Cred) forms of the mutant have similar enzymatic activity, absorption, and fluorescence spectra. All three proteins have similar far-UV CD spectra. The Y74Cred shows a distinct loss of near-UV CD. Thermal precipitation studies demonstrate that TIMWT and Y74Cox have very similar Tm values (Tm approximately 60 degreesC) whereas Y74Cred is surprisingly labile (Tm approximately 38 degreesC). The Y74C mutant results in the creation of a large cavity (approximately 100 A3) at the dimer interface. The crystal structure for the oxidized form of Y74C mutant, crystallized in the presence of low concentrations of dithiothreitol, reveals an asymmetric dimer containing a disulfide bridge at one site and a reduced dithiol cysteine at the other. The crystal structure of the mutant offers insights into the destabilization effects of the interfacial cavities and the role of disulfide tethering in restoring protein stability.

Animals↗

PubMed1999

A multivariate analysis of prognostic indicators in complete hydatidiform moles (CHM).

OBJECTIVE: To analyse prognostic factors in complete hydatidiform moles using multiple logistic regression analysis. METHODS: Evaluation of host and tumour related parameters including (a) gestational age, patient age, parity, molar phenotype, grade of proliferation of the tumour and cytological atypia, (b) expression of beta-HCG, EGF, EGFR, TGF-alpha, TGF-beta, IL1-alpha, IL1-beta by immunohistochemistry, (c) serial monitoring of serum beta-HCG levels by ELISA, and (d) lectin binding using jack fruit lectin histochemistry as indices for persisting trophoblastic disease (PTD). RESULTS: Serum beta-HCG levels at 4 weeks, cellular atypia, lectin binding, expression of TGF-alpha and IL1-beta showed highly significant correlation with persistence of the tumour (P<0.001). The sensitivity and specificity at 4 weeks in combination with cytological atypia to identify spontaneously regressing lesions was 100% and those requiring chemotherapeutic intervention was 80%. CONCLUSION: The concentration of serum beta-HCG 4 weeks post evacuation(<300 mIU/ml) combined with cytological abnormalities could identify nearly 100% of the spontaneously regressing lesions (low risk) and 80% of those needing chemotherapeutic intervention (high risk), thereby suggesting that patients who have a serum beta-HCG at 4 weeks of evacuation <300 mIU/ml with no cytological atypia of the trophoblasts need only be followed up at long intervals, while those having a serum beta-HCG at 4 weeks of evacuation >300 mIU/ml accompanied with cytological atypia of the trophoblasts should be closely followed up.

Chorionic Gonadotropin, beta Subunit, Human↗

PubMed1999

Stereochemical control of peptide folding.

Stereochemically constrained amino acid residues that strongly favour specific backbone conformations may be used to nucleate and stabilize specific secondary structures in designed peptides. An overview of the use of alphaalpha-dialkyl amino acids in stabilizing helical structures in synthetic peptides is presented, with an emphasis on work carried out in the authors laboratory. Alpha-aminoisobutyric acid (Aib) and related achiral homologs facilitate stable helix formation in oligopeptides as exemplified by a large number of crystal structure determinations in the solid state. The ability to design conformationally rigid helical modules has been exploited in attempts to design structurally well characterized helix-linker helix, using potential nonhelical linking segments. Beta-hairpin design has been approached by exploiting the tendency of 'prime turns' to nucleate hairpin formation. The use of nucleating (D)Pro-Gly segments has resulted in the generation of several well characterized beta-hairpin structures, including the crystallographic observation of beta-hairpin in a synthetic apolar octapeptide. Extensions of this approach to three stranded beta-sheets and larger structures containing multiple (D)Pro-Gly segments appear readily possible.

Amino Acid Sequence↗

PubMed1999

Unusual stability of a multiply nicked form of Plasmodium falciparum triosephosphate isomerase.

BACKGROUND: The limited proteolytic cleavage of proteins can result in distinct polypeptides that remain noncovalently associated so that the structural and biochemical properties of the 'nicked' protein are virtually indistinguishable from those of the native protein. The remarkable observation that rabbit muscle triosephosphate isomerase (TIM) can be multiply nicked by subtilisin and efficiently religated in the presence of an organic solvent formed the stimulus for our study on a homologous system, Plasmodium falciparum triosephosphate isomerase (PfTIM). RESULTS: The subtilisin nicked form of PfTIM was prepared by limited proteolysis using subtilisin and the major fragments identified using electrospray ionization mass spectrometry. The order of susceptibility of the peptide bonds in the protein was also determined. The structure of the nicked form of TIM was investigated using circular dichroism, fluorescence and gel filtration. The nicked enzyme exhibited remarkable stability to denaturants, although significant differences were observed with the wild-type enzyme. Efficient religation could be achieved by addition of an organic cosolvent, such as acetonitrile, in the presence of subtilisin. Religation was also demonstrated after dissociation of the proteolytic fragments in guanidinium chloride, followed by reassembly after removal of the denaturant. CONCLUSIONS: The eight-stranded beta8/alpha8 barrel is a robust, widely used protein structural motif. This study demonstrates that the TIM barrel can withstand several nicks in the polypeptide backbone with a limited effect on its structure and stability.

Amino Acid Sequence↗

PubMed1999

Fluoroalcohols as structure modifiers in peptides and proteins: hexafluoroacetone hydrate stabilizes a helical conformation of melittin at low pH.

The effect of hexafluoroacetone hydrate (HFA) on the structure of the honey bee venom peptide melittin has been investigated. In aqueous solution at low pH melittin is predominantly unstructured. Addition of HFA at pH approximately 2.0 induces a structural transition from the unstructured state to a predominantly helical conformation as suggested by intense diagnostic far UV CD bands. The structural transition is highly cooperative and complete at 3.6 M (50% v/v) HFA. A similar structural transition is also observed in 2,2,2 trifluoroethanol which is complete only at a cosolvent concentration of approximately 8 M. Temperature dependent CD experiments support a 'cold denaturation' of melittin at low concentrations of HFA, suggesting that selective solvation of peptide by HFA is mediated by hydrophobic interactions. NMR studies in 3.6 M HFA establish a well-defined helical structure of melittin at low pH, as suggested by the presence of strong NH/NHi+1 NOEs throughout the sequence, along with many medium range helical NOEs. Structure calculations using NOE-driven distance constraints reveal a well-ordered helical fold with a relatively flexible segment around residues T10-G11-T12. The helical structure of melittin obtained at 3.6 M HFA at low pH is similar to those determined in methanolic solution and perdeuterated dodecylphosphocholine micelles. HFA as a cosolvent facilitates helix formation even in the highly charged C-terminal segment.

Acetone↗

PubMed1999

De novo design: backbone conformational constraints in nucleating helices and beta-hairpins.

A modular approach to synthetic protein design is being developed using conformationally constrained amino acid as stereochemical directors of polypeptide chain folding. An overview of studies aimed at constructing peptide helices using alpha,alpha-dialkyated residues and beta-hairpins using D-Pro as a turn nucleator is presented. The construction of helix-helix motifs and three- and four-stranded structures has been achieved using non-protein amino acids to stabilize specific elements of secondary structures.

Amino Acids↗

PubMed1999

Isomorphous replacement combined with anomalous dispersion in the linear equations: application to a crystal containing four nonapeptide conformers.

The investigation of the structure of the four conformers of the nonapeptide described here has an additional purpose: to illustrate a method for combining isomorphous replacement information with anomalous dispersion information within the linear equations that have found use in the analysis of multiple-wavelength anomalous dispersion data. In the present application, isomorphous replacement data were obtained from the replacement of naturally occurring S atoms in the nonapeptide with Se atoms. Only one wavelength was used for the analysis: Cu Kalpha radiation. Details of the analysis are presented, as well as the structural results obtained. It was found that the four independent molecules in the structure have similar, but not identical, conformations. The backbones fold into predominantly alpha-helices with one or two 310-type hydrogen bonds and have extended side chains. Three to four water molecules are associated with each of the four head-to-tail regions between the peptides. Optimal packing between hydrophobic surfaces may account for the existence of four molecules in an asymmetric unit.

Amino Acid Sequence↗

PubMed1999

Disulfide engineering at the dimer interface of Lactobacillus casei thymidylate synthase: crystal structure of the T155C/E188C/C244T mutant.

The crystal structure of a covalently cross-linked Lactobacillus casei thymidylate synthase has been determined at 2.8 A resolution. The sites for mutation to achieve the bis-disulfide linked dimer were identified using the disulfide modeling program MODIP. The mutant so obtained was found to be remarkably thermostable. This increase in stability has been reasoned to be entirely a consequence of the covalent gluing between the two subunits.

Crystallography, X-Ray↗

PubMed1998

Conformational interconversions in peptide beta-turns: analysis of turns in proteins and computational estimates of barriers.

The two most important beta-turn features in peptides and proteins are the type I and type II turns, which differ mainly in the orientation of the central peptide unit. Facile conformational interconversion is possible, in principle, by a flip of the central peptide unit. Homologous crystal structures afford an opportunity to structurally characterize both possible conformational states, thus allowing identification of sites that are potentially stereochemically mobile. A representative data set of 250 high-resolution (</=2.0 A), non-homologous protein crystal structures and corresponding variant and homologous entries, obtained from the Brookhaven Protein Data Bank, was examined to identify turns that are assigned different conformational types (type I/type II) in related structures. A total of 55 examples of beta-turns were identified as possible candidates for a stereochemically mobile site. Of the 55 examples, 45 could be classified as a potential site for interconversion between type I and type II beta-turns, while ten correspond to flips from type I' to type II' structures. As a further check, the temperature factors of the central peptide unit carbonyl oxygen atom of the 55 examples were examined. The analysis reveals that the turn assignments are indeed reliable. Examination of the secondary structures at the flanking positions of the flippable beta-turns reveals that seven examples occur in the loop region of beta-hairpins, indicating that the formation of ordered secondary structures on either side of the beta-turn does not preclude local conformational variations. In these beta-turns, Pro (11 examples), Lys (nine examples) and Ser (seven examples) were most often found at the i+1 position. Glycine was found to occur overwhelmingly at position i+2 (28 examples), while Ser (seven examples) and Asn (six examples) were amongst the most frequent residues. Activation energy barriers for the interconversion between type I and type II beta-turns were computed using the peptide models Ac-Pro-Aib-NHMe and Ac-Pro-Gly-NHMe within the framework of the AM1 semi-empirical molecular orbital procedure. In order to have a uniform basis for comparison and to eliminate the distracting influence of the deviation of backbone dihedral angles from that expected for ideal beta-turns, the dihedral angles phii+1 and psii+2 were fixed at the ideal values (phii+1=-60 degrees and psii+2=0 degrees). The other two angles (psii+1 and phii+2) were varied systematically to go from type II to type I beta-turn structures. The computational results suggest that there exists one stereospecific, concerted flip of the central peptide unit involving correlated single bond rotation that can occur with an activation barrier of the order of 3 kcal/mol. The results presented here suggest that conformational variations in beta-turns are observed in protein crystal structures and such changes may be an important dynamic feature in solution.

Models, Chemical↗

PubMed1998

Synthetic interface peptides as inactivators of multimeric enzymes: inhibitory and conformational properties of three fragments from Lactobacillus casei thymidylate synthase.

Three synthetic peptides corresponding to distinct segments of the subunit interface of the dimeric enzyme thymidylate synthase (residues 17-38, N 22; residues 174-190, M 17; and residues 201-220, C 20) have been investigated for their ability to function as inhibitors by modifying the quaternary structure of the enzyme. A dramatic reduction of enzyme activity is observed following incubation of TS with the C 20 peptide. The N 22 and M 17 peptides were unable to cause any loss of enzymatic activity. Addition of the C 20 peptide results in a loss of fluorescence of TS labeled with a dansyl group at Cys 198, following aggregation and precipitation of the protein. The effects are not observed for the N 22 or M 17 peptides. Loss of enzymatic activity is related to the ability of C 20 to promote protein aggregation. The conformations of the peptides have been studied using CD and NMR in order to correlate the observed function with solution structures. Peptides N 22 and M 17 are largely unstructured in aqueous solution. A population of nascent helical structures or multiple turn conformations has been detected for the C 20 peptide in aqueous solution by NMR. Addition of 50% (v/v) hexafluoroacetone trihydrate (HFA), a structure-stabilizing cosolvent, stabilizes the helical conformation in the C 20 peptide. Under similar conditions, N 22 and M 17 remain largely extended with observations of local beta-turn conformations. Interestingly, the C 20 peptide is a beta-hairpin in the native structure, whereas the other two peptides are individual strand components of a beta-sheet.

Acetone↗

PubMed1998

Crystal structure of the channel-forming polypeptide antiamoebin in a membrane-mimetic environment.

Crystals of an ion-channel-forming peptaibol peptide in a partial membrane environment have been obtained by cocrystallizing antiamoebin with n-octanol. The antiamoebin molecule has a bent helical conformation very similar to that established for Leu-zervamicin, despite a significantly different sequence for residues 1-8. The bent helices assemble to form a polar channel in the shape of an hour glass that is quite comparable to that of Leu-zervamicin. The molecules of cocrystallized octanol are found in two different areas with respect to the assembly of peptide molecules. One octanol molecule mimics a membrane segment along the hydrophobic exterior of the channel assembly. The other octanol molecules fill the channel in such a way that their OH termini satisfy the C==O moieties directed into the interior of the channel. Structure parameters for C82 H27 N17 O20(.3) C8H18O are space group P2(1) 2(1) 2(1), a = 9.143(2) A, b = 28.590(8) A, c = 44.289(8) A, Z = 4, agreement factor R1 = 11.95% for 4,113 observed reflections [>4sigma(F)], resolution approximately 1.0 A.

Anti-Bacterial Agents↗