Search PubMed⌕ Search

Biomedical subjects

Olga V Boltalina

Publications and source records attributed to Olga V Boltalina.

At least 19 recordsLinked to original sources
PubMed2007

Bond orders and atomic properties of the highly deformed halogenated fullerenes C60F18 and C60Cl30 derived from their charge densities.

The experimental charge densities of the halogenated C(60) fullerenes C(60)F(18) and C(60)Cl(30) were determined from high-resolution X-ray data sets measured with conventional Mo(Kalpha) radiation at 20 K for C(60)Cl(30) and with synchrotron radiation at 92 K for the fluorine compound. Bond topological and atomic properties were analyzed by using Bader's AIM theory. For the different C--C bonds, which vary in lengths between 1.35 and 1.70 A bond orders n between n=2 and significantly below n=1 were calculated from the bond topological properties at the bond critical points (BCP's). The low bond orders are seen for 5/6 bonds with each contributing carbon carrying a halogen atom. By integration over Bader's zero flux basins in the electron density gradient vector field atomic properties were also obtained. In contrast to free C(60), in which all carbon atoms have a uniform volume of 11 A(3) and zero charge, atomic volumes vary roughly between 5 and 10 A(3) in the halogenated compounds. Almost zero atomic charges are also found in the Cl derivative but a charge separation up to +/-0.8 e exists between C and F in C(60)F(18) due to the higher fluorine electronegativity, which is also seen in the electrostatic potential for which the electronegativity difference between carbon and fluorine, and the addition to one hemisphere of the fullerene cage leads to a strong potential gradient along the C(60)F(18) molecule. From the summation over all atomic volumes it follows that the halogen addition does not only lead to a dramatic distortion of the C(60) cage but also to a significant shrinkage of its volume.

Journal Article↗
PubMed2006

Trifluoromethyl derivatives of insoluble small-HOMO-LUMO-gap hollow higher fullerenes. NMR and DFT structure elucidation of C2-(C74-D3h)(CF3)12, Cs-(C76-Td(2))(CF3)12, C2-(C78-D3h(5))(CF3)12, Cs-(C80-C2v(5))(CF3)12, and C2-(C82-C2(5))(CF3)12.

Reaction of a mixture of insoluble higher fullerenes with CF3I at 500 degrees C produced a single abundant isomer of C74(CF3)12, C76(CF3)12, and C80(CF3)12, two abundant isomers of C78(CF3)12 and C82(CF3)12, and an indeterminant number of isomers of C84(CF3)12. Using a combination of 19F NMR spectroscopy, DFT calculations, and the structures and spectra of previously reported fullerene(CF3)n compounds, the most-probable structures of six of the seven isolated compounds were determined to be specific isomers of C2-(C74-D3h)(CF3)12, Cs-(C76-Td(2))(CF3)12), C2-(C78-D3h(5))(CF3)12), Cs-(C80-C2v(5))(CF3)12), C2-(C82-C2(5))(CF3)12), and C2-(C82-C2(3))(CF3)12) containing ribbons and/or loops of edge-sharing para-C6(CF3)2 hexagons. The seventh isolated compound is a C1 isomer of C78(CF3)12 containing two such ribbons. This set of compounds represents only the second reported isolable compound with the hollow C74-D3h cage and the first experimental evidence for the existence of the hollow fullerenes C76-Td(2), C78-D3h(5), C80-C2v(5), and C82-C2(5) in arc-discharge soots.

Algorithms↗
PubMed2006

Thermally stable perfluoroalkylfullerenes with the skew-pentagonal-pyramid pattern: C60(C2F5)4O, C60(CF3)4O, and C60(CF3)6.

Reaction of C(60) with CF(3)I at 550 degrees C, which is known to produce a single isomer of C(60)(CF(3))(2,4,6) and multiple isomers of C(60)(CF(3))(8,10), has now been found to produce an isomer of C(60)(CF(3))(6) with the C(s)-C(60)X(6) skew-pentagonal-pyramid (SPP) addition pattern and an epoxide with the C(s)-C(60)X(4)O variation of the SPP addition pattern, C(s)-C(60)(CF(3))(4)O. The structurally similar epoxide C(s)-C(60)(C(2)F(5))(4)O is one of the products of the reaction of C(60) with C(2)F(5)I at 430 degrees C. The three compounds have been characterized by mass spectrometry, DFT quantum chemical calculations, Raman, visible, and (19)F NMR spectroscopy, and, in the case of the two epoxides, single-crystal X-ray diffraction. The compound C(s)-C(60)(CF(3))(6) is the first [60]fullerene derivative with adjacent R(f) groups that are sufficiently sterically hindered to cause the (DFT-predicted) lengthening of the cage (CF(3))C-C(CF(3)) bond to 1.60 A as well as to give rise to a rare, non-fast-exchange-limit (19)F NMR spectrum at 20 degrees C. The compounds C(s)-C(60)(CF(3))(4)O and C(s)-C(60)(C(2)F(5))(4)O are the first poly(perfluoroalkyl)fullerene derivatives with a non-fluorine-containing exohedral substituent and the first fullerene epoxides known to be stable at elevated temperatures. All three compounds demonstrate that the SPP addition pattern is at least kinetically stable, if not thermodynamically stable, at temperatures exceeding 400 degrees C. The high-temperature synthesis of the two epoxides also indicates that perfluoroalkyl substituents can enhance the thermal stability of fullerene derivatives with other substituents.

Journal Article↗
PubMed2006

Infrared, Raman, and DFT vibrational spectroscopic studies of C60F36 and C60F48.

IR and Raman spectra of two fluorofullerenes, C60F48 and C60F36, are thoroughly studied. Assignment of the experimental spectra is provided on the basis of density functional theory (DFT) computations. Perfect correspondence between experimental and computed spectra enabled us to confirm that the major isomer of C60F48 has D3 symmetry. It was found that as-synthesized samples of C60F36 consist mainly of C3 and C1 isomers in ca. 2:1 ratio and 2-3% of T-symmetric structures. Extensive AM1 and DFT computations have shown that all three structures are the most stable isomers of C60F36. Previous structural assignment of the C3 isomer (Gakh, A. A.; Tuinman, A. A. Tetrahedron Lett. 2001, 42, 7137-7139) was confirmed by the vibrational data.

Journal Article↗
PubMed2006

Electron transfer reactivity in matrix-assisted laser desorption/ionization (MALDI): ionization energy, electron affinity and performance of the DCTB matrix within the thermochemical framework.

DCTB [(H(3)C)(3)C-p-Ph-CH=C(CH(3))-trans-CH=C(CN)(2)] has recently advanced to the most promising matrix material for matrix-assisted laser desorption/ionization (MALDI) within material sciences. However, data that would allow the evaluation of the electron-transfer reactivity within a thermochemical framework are sparse. The present study reports the first-time determination of the ionization energy (IE) of DCTB applying photoelectron (PE) spectroscopy. The experimental IE (8.54 +/- 0.05 eV) is in excellent agreement with the theoretical value of 8.47 eV, obtained by AM1 calculations. The same level of theory determines the electron affinity (EA) as 2.31 eV. Model analytes of known thermochemistry (phenanthrene [C(14)H(10)], anthracene [C(14)H(10)] and fluorofullerene [C(60)F(46/48)]) are used to bracket the electron-transfer reactivity within DCTB-MALDI. The formation of molecular ions of these analytes either is expected or is beyond the thermochemical accessibility of the DCTB matrix.

Journal Article↗
PubMed2006

Synthesis, characterization, and theoretical study of stable isomers of C70(CF3)n (n = 2, 4, 6, 8, 10).

Reaction of C70 with ten equivalents of silver(I) trifluoroacetate at 320-340 degrees C followed by fractional sublimation at 420-540 degrees C and HPLC processing led to the isolation of a single abundant isomer of C70(CF3)n for n = 2, 4, 6, and 10, and two abundant isomers of C70(CF3)8. These six compounds were characterized by using matrix-assisted laser desorption ionization (MALDI) mass spectrometry, 2D-COSY and/or 1D 19F NMR spectroscopy, and quantum-chemical calculations at the density functional theory (DFT) level. Some were also characterized by Raman spectroscopy. The addition patterns for the isolated compounds were unambiguously found to be C1-7,24-C70(CF3)2, C1-7,24,44,47-C70(CF3)4, C2-1,4,11,19,31,41-C70(CF3)6, Cs-1,4,11,19,31,41,51,64-C70(CF3)8, C2-1,4,11,19,31,41,51,60-C70(CF3)8, and C1-1,4,10,19,25,41,49,60,66,69-C70(CF3)10 (IUPAC numbering). Except for the last compound, which is identical to the recently reported, crystallographically characterized C70(CF3)10 derivative prepared by a different synthetic route, these compounds have not previously been shown to have the indicated addition patterns. The largest relative yield under an optimized set of reaction conditions was for the Cs isomer of C70(CF3)8 (ca. 30 mol % of the sublimed mixture of products based on HPLC integration). The results demonstrate that thermally stable C70(CF3)n isomers tend to have their CF3 groups arranged on isolated para-C6(CF3)2 hexagons and/or on a ribbon of edge-sharing meta- and/or para-C6(CF3)2 hexagons. For Cs- and C2-C70(CF3)8 and for C2-C70(CF3)6, the ribbons straddle the C70 equatorial belt; for C1-C70(CF3)4, the para-meta-para ribbon includes three polar hexagons; for C1-7,24-C70(CF3)2, the para-C6(CF3)2 hexagon includes one of the carbon atoms on a C70 polar pentagon. The 10.3-16.2 Hz 7JF,F NMR coupling constants for the end-of-ribbon CF3 groups, which are always para to their nearest-neighbor CF3 group, are consistent with through-space Fermi-contact interactions between the fluorine atoms of proximate, rapidly rotating CF3 groups.

Journal Article↗
PubMed2006

Differences in electronic properties of fluorinated and trifluoromethylated fullerenes revealed by their propensity for dianion formation.

The cross sections for electron transfer from sodium to C(60)F(n) (-) and C(60)(CF(3))(n) (-) anions in 50-keV collisions as a function of the number of functional groups n are reported. There are clear differences between derivatives of fluorine and trifluoromethyl due to the different electron withdrawing properties of F and CF(3). The role of inductive effects and pi electron delocalization on the electron affinity is discussed, assuming a correlation between the cross section and the electron affinity of the anion.

Journal Article↗
PubMed2005

Poly(trifluoromethyl)fullerene radical anions. An ESR/Vis-NIR Spectroelectrochemical Study of C60F2,4 and C60(CF3)2,10.

Cyclic voltammograms are reported for C(60)(CF(3))(n) derivatives for the first time. The compounds studied were 1,9-C(60)(CF(3))(2) and 3 isomers of C(60)(CF(3))(10), including the structurally characterized derivative 1,3,7,10,14,17,23,28,31,40-C(60)(CF(3))(10) (C(60)(CF(3))(10)-3). The compound 1,9-C(60)(CF(3))(2) exhibited 3 reversible reductions; C(60)(CF(3))(10)-3 exhibited 2 reversible reductions; the other 2 isomers of C(60)(CF(3))(10) each exhibited 1 reversible reduction. ESR and near-IR spectroelectrochemical experiments were performed to characterize some of the C(60)(CF(3))(n)(-) and C(60)(CF(3))(n)(2-) species generated by cyclic voltammetry. The ESR spectrum of the C(60)(CF(3))(10)-3(-) radical anion consisted of an envelope of 25 lines centered at g = 2.0032 (the apparent a value is ca. 0.5 G), evidence of coupling between the unpaired electron and a significant number of the CF(3) fluorine atoms. The most significant finding is that this radical anion has a half-life in solution at 25 degrees C of about 7 min.

Letter↗
PubMed2005

Seven-minute synthesis of pure C(s)-C60Cl6 from [60]fullerene and iodine monochloride: first IR, Raman, and mass spectra of 99 mol % C60Cl6.

Three previously reported procedures for the synthesis of pure C(s)-C60Cl6 from C60 and ICl dissolved in benzene or 1,2-dichlorobenzene were shown to actually yield complex mixtures of products that contain, at best, 54-80% C(s)-C60Cl6 based on HPLC integrated intensities. MALDI mass spectrometry was used for the first time to identify other components of the reaction mixtures. An improved synthetic procedure was developed for the synthesis of about 150 mg batches of chlorofullerenes containing 90% C(s)-C60Cl6 based on HPLC intensities. The optimum reaction time was decreased from several days to seven minutes. Small amounts of the product were purified by HPLC (toluene eluent) to 99% purity. The pure compound C(s)-C60Cl6 is stable for at least three months as a solvent-free powder at 25 degrees C. The Raman, far-IR, and MALDI mass spectra of pure C(s)-C60Cl6 are reported for the first time. The Raman and far-IR spectra, the first reported for any C60Cl(n) chlorofullerene, were used to carry out a vibrational analysis of C(s)-C60Cl6 at the DFT level of theory.

Journal Article↗
PubMed2005

Variable-temperature 19F NMR and theoretical study of 1,9- and 1,7-C60F(CF3) and C(s-) and C1-C60F17(CF3): hindered CF3 rotation and through-space J(FF) coupling.

Milligram amounts of the new compounds 1,9- and 1,7-C60F(CF3) (ca. 85:15 mixture of isomers) and C60F3(CF3) were isolated from a high-temperature C60/K2PtF6 reaction mixture and purified to 98 mol % compositional purity by two-dimensional high-performance liquid chromatography using Buckyprep and Buckyclutcher columns. The previously observed compounds C60F5(CF3) and C60F7(CF3) were also purified to 90+ mol % for the first time. Variable-temperature 19F NMR spectra of the mixture of C60F(CF3) isomers and the previously reported mixture of C(s)- and C1-C60F17(CF3) isomers demonstrate for the first time that fullerene(F)n(CF3)m derivatives with adjacent F and CF3 substituents exhibit slow-exchange limit hindered CF3 rotation spectra at -40 +/- 10 degrees C. The experimental and density functional theory (DFT) predicted deltaH++ values for CF3 rotation in 1,9-C60F(CF3) are 46.8(7) and 46 kJ mol(-1), respectively. The DFT-predicted deltaH++ values for 1,7-C60F(CF3), C(s)-C60F17(CF3), and C1-C60F17(CF3) are 20, 44, and 54 kJ mol(-1), respectively. The (> or = 4)J(FF) values from the slow-exchange-limit 19F spectra, which vary from ca. 0 to 48(1) Hz, show that the dominant nuclear spin-spin coupling mechanism is through-space coupling (i.e., direct overlap of fluorine atom lone-pair orbitals) rather than coupling through the sigma-bond framework. The 2J(FF) values within the CF3 groups vary from 107(1) to 126(1) Hz. Collectively, the NMR data provide an unambiguous set of (> or = 4)J(FF) values for three different compounds that can be correlated with DFT-predicted or X-ray diffraction derived distances and angles and an unambiguous set of 2J(FF) values that can serve as an internal standard for all future J(FF) calculations.

Journal Article↗
PubMed2005

Synthesis, structure, and 19F NMR spectra of 1,3,7,10,14,17,23,28,31,40-C60(CF3)10.

A significant improvement in the selectivity of fullerene trifluoromethylation reactions was achieved. Reaction of trifluoroiodomethane with [60]fullerene at 460 degrees C and [70]fullerene at 470 degrees C in a flow reactor led to isolation of cold-zone-condensed mixtures of C60(CF3)n and C70(CF3)n compounds with narrow composition ranges: 6 < or = n < or = 12 for C(60)(CF3)n and 8 < or = n < or = 14 for C70(CF3)n. The predominant products in the C(60) reaction, an estimated 40+ mol % of the cold-zone condensate, were three isomers of C60(CF3)10. Two of these were purified by two-stage HPLC to 80+% isomeric purity. The third isomer was purified by three-stage HPLC to 95% isomeric purity. Thirteen milligrams of this orange-brown compound was isolated (5% overall yield based on C60, and its C1-symmetric structure was determined to be 1,3,7,10,14,17,23,28,31,40-C60(CF3)10 by X-ray crystallography. The CF3 groups are either meta or para to one another on a p-m-p-p-p-m-p-m-p ribbon of edge-sharing C6(CF3)2 hexagons (each pair of adjacent hexagons shares a common CF3 group). The selectivity of the C70 reaction was even higher. The predominant product was a single C70(CF3)10 isomer representing >40 mol % of the cold-zone condensate. Single-stage HPLC led to the isolation of 12 mg of this brown compound in 95% isomeric purity (27% overall yield based on converted C70. The new compounds were characterized by EI or S(8)-MALDI mass spectrometry and 2D-COSY 19F NMR spectroscopy. The NMR data demonstrate that through-space coupling via direct overlap of fluorine orbitals is the predominant contribution to J(FF) values in these and most other fullerene(CF3)n compounds.

Journal Article↗
PubMed2005

In-plume thermodynamics of the MALDI generation of fluorofullerene anions.

The mechanism of formation of fluorofullerene (FF) negative ions derived from the compounds C(60)F(18), C(60)F(36), and C(60)F(48) was studied by matrix-assisted laser desorption/ionization (MALDI) time-of-flight (ToF) mass spectrometry (MS). A combined experimental/theoretical approach provides compelling evidence of nondissociative, thermodynamically controlled electron transfer from matrix-derived negative ions to the FF analyte as the main secondary-ionization process. Consistent with this thermochemical model, analyte parent molecular ion yield and degree of fragmentation for a particular MALDI experiment was found to depend on the nature of the matrix material (the five matrices investigated were sulfur, trans-2-[3-{4-tert-butylphenyl}-2-methyl-2-propenylidene]malononitrile, 9-nitroanthracene, 2,6-bis((furan-2-yl)methylene)cyclohexanone, and 2,6-bis((thiophen-2-yl)methylene)cyclohexanone). For mixtures of C(60)F(n) compounds with different n values and therefore different electron affinitites, unwanted electron-transfer reactions, which can lead to the suppression of C(60)F(n)(-) ions with low n values, were successfully blocked for the first time by judicious choice of the matrix. Therefore, reliable qualitative MS analysis of FF mixtures with wide ranges of composition is now possible.

Journal Article↗
PubMed2005

Formation of long-lived fluorofullerene trianions in collisions with Na.

The first experimental observation of long-lived triply charged fluorofullerene anions in the gas phase obtained from C60F48 is reported. The existence of a Coloumb barrier trapping the third electron in the trianion is supposed to be responsible for detection of the species which is estimated to have negative third electron affinity.

Journal Article↗
PubMed2004

Th-C60F24.

The regioselective fluorination of Th-C60Br24 with XeF2 in anhydrous HF at 25 degrees C produced Th-C60F24, which is isostructural with Th-C60Br24. The compound, the first example of a fluorofullerene with a noncontiguous pattern of F-bearing sp3 C atoms, was characterized by EI and ESI mass spectrometry and by 19F NMR (single resonance at delta -144 for all 24 F atoms), 13C NMR (two resonances at delta 145.9 (C=C) and delta 83.5 (C-F; JCF = 212 Hz), and FTIR spectroscopy. DFT calculations revealed that at least two other isomers of C60F24 are more stable than Th-C60F24 by >/=280 kJ mol-1, demonstrating that Th-C60F24 is a kinetically stable fluorofullerene.

Journal Article↗