Search PubMed⌕ Search

Biomedical subjects

Odile Eisenstein

Publications and source records attributed to Odile Eisenstein.

At least 19 recordsLinked to original sources
PubMed2006

Validation of the M-C/H-C bond enthalpy relationship through application of density functional theory.

Density functional theory has been used to calculate H-C and M-C bond dissociation enthalpies in order to evaluate the feasibility of correlating relative M-C bond enthalpies Delta H(M-C)rel with H-C bond enthalpies Delta H(H-C) via computational methods. This approach has been tested against two experimental correlations: a study of (a) Rh(H)(R)(Tp')(CNCH2CMe3) [R = hydrocarbyl, Tp' = HB(3,5-dimethylpyrazolyl)3] (Wick, D. D.; Jones, W. D. Organometallics 1999, 18, 495) and (b) Ti(R)(silox)2(NHSit-Bu3) (silox = OSit-Bu3) (Bennett, J. L.; Wolczanski, P. T. J. Am. Chem. Soc. 1997, 119, 10696). We show that the observation that M-C bond enthalpies increase more rapidly with different substituents than H-C bond enthalpies is reproduced by theory. Quantitative slopes of the correlation lines are reproduced within 4% of the experimental values with a B3PW91 functional and with very similar correlation coefficients. Absolute bond enthalpies are reproduced within 6% for H-C bonds, and relative bond enthalpies for M-C bonds are reproduced within 30 kJ mol(-1) for Rh-C bonds and within 19 kJ mol(-1) for Ti-C bonds. Values are also calculated with the BP86 functional.

Journal Article↗
PubMed2006

DFT calculations of d0 M(NR)(CHtBu)(X)(Y) (M = Mo, W; R = CPh3, 2,6-iPr-C6H3; X and Y = CH2tBu, OtBu, OSi(OtBu)3) olefin metathesis catalysts: structural, spectroscopic and electronic properties.

DFT(B3PW91) calculations have been carried out to rationalise the structural, electronic and spectroscopic properties of Mo and W imido M(NR1)(CHR2)(X)(Y) olefin metathesis catalysts by using either simplified or actual ligands of the experimental complexes. The calculated structures, energetics (preference for the syn isomer and alkylidene rotational barrier for the syn/anti interconversion), and spectroscopic properties (NMR J(C-H) coupling constants) are in good agreement with available experimental data. Additionally, the alkylidene nu(C-H) stretching frequencies, not available experimentally, have been calculated. These quasi-tetrahedral complexes have a linear imido group and a C-H alkylidene agostic interaction, which stabilizes the syn isomer. Whether looking at M(NR1)(CHR2)(X)(Y), M = Mo, W, or the isolobal Re complexes, Re(CR1)(CHR2)(X)(Y), a linear correlation is obtained between both the alkylidene nu(C-H) stretching frequencies and J(C-H) coupling constants with the calculated alkylidene C-H bond lengths. These correlations show that the strength of the alpha-C-H agostic interaction increases from alkylidyne Re to imido group 6 complexes and from Mo to W. The NBO and AIM Bader analyses show firstly that the imido and alkylidyne groups are both triply bonded to the metal, but that the triply bonded imido ligand is a weaker electron donor than the alkylidyne, hence the stronger alpha-C-H agostic interaction for group 6 imido complexes. Secondly, one of the pi bonds of the triply bonded ligand is weakened at the transition state of the alkylidene rotation: while no lone pair is formed, the metal-ligand triple bond is polarized. This is more favourable for an imido than for an alkylidyne ligand, hence the lower alkylidene rotational barrier for the former complexes. Conversely, the aryl imido is even less of an electron donor than the alkyl imido group, which in turn strengthens the alpha-C-H agostic interaction and lowers the alkylidene rotational barrier even more.

Journal Article↗
PubMed2006

DFT studies of the methyl exchange reaction between Cp2M-CH3 or Cp*2M-CH3 (Cp = C5H5, Cp* = C5Me5, M = Y, Sc, Ln) and CH4. Does M ionic radius control the reaction?

The activation energies for the methyl exchange reactions between Cp2M-CH3 and H-CH3 have been calculated for M = Sc, Y and representative metals of the lanthanide family (La, Ce, Sm, Ho, Yb and Lu) with DFT(B3PW91) calculations with large-core pseudopotentials for M. The sigma-bond metathesis reactions are calculated to have lower activation energies for early lanthanides than for late lanthanides and any of group 3 metals. The relative activation barriers are analyzed using the NBO charge distributions in the reactant and in the transition states. It is shown that the methane needs to be polarized in the transition state as H((+delta))-CH3((-delta)) by the reactant, because this sigma-bond metathesis is best viewed as heterolytic cleavage of methane, leading to a proton transfer between two methyl groups in the field of an electropositive M metal. Early lanthanides, which are involved in strongly ionic metal-ligands bonds are thus associated with the lowest activation energies. The ionic radius and the steric effects influence the relative rates of reaction for the complexes of Sc, Y and Lu. In agreement with earlier works of Sherer et al., the experimental reactivity trends found by Tilley are reproduced best with Cp*2M-CH3 (Cp* = C5Me5) rather than Cp2M-CH3 (Cp = C5H5) because the steric bulk of C5Me5 deactivates most the complex where the metal has the smallest ionic radius (Sc). While the steric effects and the influence of the metal ionic radius cannot be neglected, these factors are not the only ones involved in determining the activation barriers of the sigma-bond metathesis reaction.

Journal Article↗
PubMed2005

An anion-dependent switch in selectivity results from a change of C-H activation mechanism in the reaction of an imidazolium salt with IrH5(PPh3)2.

Changing the counteranion along the series Br, BF4, PF6, SbF6 in their ion-paired 2-pyridylmethyl imidazolium salts causes the kinetic reaction products with IrH5(PPh3)2 to switch from chelating N-heterocyclic carbenes (NHCs) having normal C2 (N path) to abnormal C5 binding (AN path). Computational work (DFT) suggests that the AN path involves C-H oxidative addition to Ir(III) to give Ir(V) with little anion dependence. The N path, in contrast, goes by heterolytic C-H activation with proton transfer to the adjacent hydride. The proton that is transferred is accompanied by the counteranion in an anion-coupled proton transfer, leading to an anion dependence of the N path, and therefore of the N/AN selectivity. The N path goes via Ir(III), not Ir(V), because the normal NHC is a much less strong donor ligand than the abnormal NHC. PGSE NMR experiments support the formation of ion-pair in both the reactants and the products. 19F,1H-HOESY NMR experiments indicate an ion-pair structure for the products that is consistent with the computational prediction (ONIOM(B3PW91/UFF)).

Journal Article↗
PubMed2005

d0 Re-based olefin metathesis catalysts, Re([triple bond]CR)(=CHR)(X)(Y): the key role of X and Y ligands for efficient active sites.

DFT(B3PW91) calculations show that the reaction pathways for ethylene metathesis with Re([triple bond]CMe)(=CHMe)(X)(Y) (X/Y = CH2CH3/CH2CH3; CH2CH3/OSiH3; OSiH3/CH2CH3; OCH3/OCH3, CH2CH3/OCH3, and OCF3/OCF3) occur in two steps: first, the pseudo-tetrahedral d0 Re complexes distort to a trigonal pyramid to open a coordination site for ethylene, which remains far from Re (early transition state for C-C bond formation). The energy barrier, determined by the energy required to distort the catalyst, is the lowest for unsymmetrical ligands (X not equal Y) when the apical site of the TBP is occupied by a good sigma-donor ligand (X) and the basal site by a poor sigma-donor (Y). Second, the formation of metallacyclobutanes (late transition state for C-C bond formation) has a low energy barrier for any type of ligands, decreasing for poor sigma-donor X and Y ligands, because they polarize the Re-C alkylidene bond as Re(+delta)=C(-delta), which favors the reaction with ethylene, itself polarized by the metal center in the reverse way. The metallacyclobutane is also a TBP, with apical alkylidyne and Y ligands, and it is stabilized by poor sigma-donor X and Y. The best catalyst will have the more shallow potential energy surface, and will thus be obtained for the unsymmetrical set of ligands with X = a good sigma-donor (alkyl) and Y = a poor sigma-donor (O-based ligand). This rationalizes the high efficiency of well-defined Re alkylidene supported on silica, compared to its homogeneous equivalent, Re([triple bond]CMe)(=CHMe)(OR)2.

Alkenes↗
PubMed2005

Hydrogen for fluorine exchange in CH4-xFx by monomeric [1,2,4-(Me3C)3C5H2]2CeH: experimental and computational studies.

The monomeric metallocenecerium hydride, Cp'(2)CeH (Cp' = 1,2,4-tri-tert-butylcyclopentadienyl), reacts instantaneously with CH(3)F, but slower with CH(2)F(2), to give Cp'(2)CeF and CH(4) in each case, a net H for F exchange reaction. The hydride reacts very slowly with CHF(3), and not at all with CF(4), to give Cp'(2)CeF, H(2), and 1,2,4- and 1,3,5-tri-tert-butylbenzene. The substituted benzenes are postulated to result from trapping of a fluorocarbene fragment derived by alpha-fluoride abstraction from Cp'(2)CeCF(3). The fluoroalkyl, Cp'(2)CeCF(3), is generated by reaction of Cp'(2)CeH and Me(3)SiCF(3) or by reaction of the metallacycle, [(Cp')(Me(3)C)(2)C(5)H(2)C(Me(2))CH(2)]Ce, with CHF(3), and its existence is inferred from the products of decomposition, which are Cp'(2)CeF, the isomeric tri-tert-butylbenzenes and in the case of Me(3)SiCF(3), Me(3)SiH. The fluoroalkyls, Cp'(2)CeCH(2)F and Cp'(2)CeCHF(2), generated from the metallacycle and CH(3)F and CH(2)F(2), respectively, are also inferred by their decomposition products, which are Cp'(2)CeF, CH(2), and CHF, respectively, which are trapped. DFT(B3PW91) calculations have been carried out to examine several reaction paths that involve CH and CF bond activation. The calculations show that the CH activation by Cp(2)CeH proceeds with a low barrier. The carbene ejection and trapping by H(2) is the rate-determining step, and the barrier parallels that found for reaction of H(2) with CH(2), CHF, and CF(2). The barrier of the rate-determining step is raised as the number of fluorines increases, while that of the CH activation path is lowered as the number of fluorines increases, which parallels the acidity.

Journal Article↗
PubMed2005

Hydrogen for fluorine exchange in C6F6 and C6F5H by monomeric [1,3,4-(Me3C)3C5H2]2CeH: experimental and computational studies.

The net reaction of monomeric Cp'(2)CeH [Cp' = 1,3,4-(Me(3)C)(3)(C(5)H(2))] in C(6)D(6) with C(6)F(6) is Cp'(2)CeF, H(2), and tetrafluorobenzyne. The pentafluorophenylmetallocene, Cp'(2)Ce(C(6)F(5)), is formed as an intermediate that decomposes slowly to Cp'(2)CeF and C(6)F(4) (tetrafluorobenzyne), and the latter is trapped by the solvent C(6)D(6) as a [2+4] cycloadduct. In C(6)F(5)H, the final products are also Cp'(2)CeF and H(2), which are formed from the intermediates Cp'(2)Ce(C(6)F(5)) and Cp'(2)Ce(2,3,5,6-C(6)F(4)H) and from an unidentified metallocene of cerium and the [2+4] cycloadducts of tetra- and trifluorobenzyne with C(6)D(6). The hydride, fluoride, and pentafluorophenylmetallocenes are isolated and characterized by X-ray crystallography. DFT(B3PW91) calculations have been used to explore the pathways leading to the observed products of the exergonic reactions. A key step is a H/F exchange reaction which transforms C(6)F(6) and the cerium hydride into C(6)F(5)H and Cp'(2)CeF. This reaction starts by an eta(1)-F-C(6)F(5) interaction, which serves as a hook. The reaction proceeds via a sigma bond metathesis where the fluorine ortho to the hook migrates toward H with a relatively low activation energy. All products observed experimentally are accommodated by pathways that involve C-F and C-H bond cleavages.

Journal Article↗
PubMed2004

Is the allylpalladium structure altered between solid and solutions?

Recent EXAFS measurements on [(Ph(2)PCH(2)CH(2)PPh(2))Pd(H(2)CCHCMe(2))]O(3)SCF(3) (Tromp et al. J. Am. Chem. Soc. 2002, 124, 14814) were interpreted as evidence that, when the complex is dissolved in THF, the allyl ligand adopts an eta(2) structure with a dangling allyl CH(2) substituent. DFT calculations of the Pd complex using H(2)P-CH(2)CH(2)-PH(2) as a model for Ph(2)P-CH(2)CH(2)-PPh(2) (dppe), in the absence or the presence of the triflate counteranion, and modeling the THF solvent by explicit Me(2)O molecules or by a continuum model give always a conventional eta(3)-H(2)CCHCMe(2) structure with equal Pd-C bonds to the terminal carbon centers of the allyl. QM/MM calculations using the dppe ligand also fail to support an eta(2)-allyl structure as a global minimum. The EXAFS parameter space is shown to have multiple minima. These have very similar overall EXAFS, but have very different structural parameters. The minimum that was the basis for the previous structural conclusion gives a slightly better fit but has unrealistic Debye-Waller factors and threshold energies.

Alkenes↗
PubMed2004

Double geminal C-H activation and reversible alpha-elimination in 2-aminopyridine iridium(III) complexes: the role of hydrides and solvent in flattening the free energy surface.

[H2Ir(OCMe2)2L2]BF4 (1) (L = PPh3), a preferred catalyst for tritiation of pharmaceuticals, reacts with model substrate 2-(dimethylamino)pyridine (py-NMe2; py = 2-pyridyl) to give chelate carbene [H2Ir(py-N(Me)CH=)L2]BF4 (2a) via cyclometalation, H2 loss, and reversible alpha-elimination. Agostic intermediate [H2Ir(py-N(Me)CH2-H)L2]BF4) (4a), seen by NMR, is predicted (DFT(B3PW91) computations) to give C-H oxidative addition to form the alkyl intermediate [(H)(eta2-H2)Ir(py-N(Me)CH2-)L2]BF4. Loss of H2 leads to the fully characterized alkyl [HIr(OCMe2)(py-N(Me)CH2-)L2]BF4 (3a(Me2CO)), which loses acetone to give alkylidene hydride 2a by rapid reversible alpha-elimination. 2a rapidly reacts with excess H2 in d6-acetone to generate [H2Ir(OC(CD3)2)2L2]BF4 (1-d12), 3a((CD3)2CO), and py-NMe2 in a 1:1:1 ratio, showing reversibility and accounting for the selective isotope exchange catalyzed by 1. Reaction of 1 with py-N(CH2)4 gives the fully characterized carbene 2c. A cis-L(2) carbene intermediate, cis-2c, observed by NMR, reacts with CO via retro alpha-elimination to give the alkyl 3cCO, while the trans isomer, 2c, does not react; retro alpha-elimination thus requires the Ir-H bond to be orthogonal to the carbene plane. Consistent with experiment, computational studies show a particularly flat PE surface with activation of the agostic C-H bond giving a less stable H2 complex, then formation of a kinetic carbene complex with cis-L, only seen experimentally for py-N(CH2)4. Hydrides at key positions, together with gain or loss of solvent and H2, flatten the PE (DeltaG) surfaces to allow fast catalysis.

Journal Article↗
PubMed2004

Defluorination of perfluoropropene using Cp*2ZrH2 and Cp2ZrHF: a mechanism investigation from a joint experimental-theoretical perspective.

Cp*(2)ZrH(2) (1) (Cp* = pentamethylcyclopentadienyl) reacts with perfluoropropene (2) to give Cp*(2)ZrHF (3) and hydrodefluorinated products under very mild conditions. Initial C-F bond activation occurs selectively at the vinylic terminal position of the olefin to exchange fluorine for hydrogen. Subsequent hydrodefluorination leads to the formation of the n-propylhydride complex Cp*(2)ZrH(CH(2)CH(2)CH(3)), which can be cleaved with dihydrogen to give propane and 1. A theoretical study of the reaction of Cp*(2)ZrH(2) (Cp* = cyclopentadienyl) and CF(2)[double bond]CF(CF(3)) has been undertaken. Several mechanisms have been examined in detail using DFT(B3PW91) calculations and are discussed for this H/F exchange: (a) internal olefin insertion/beta-fluoride elimination, (b) external olefin insertion/beta-fluoride elimination, and (c) F/H metathesis from either an inside or outside approach. Of these, the first case is found to be energetically preferred. Selective defluorination at the terminal carbon has been shown to be favored over defluorination at the substituted and allylic carbons.

Journal Article↗
PubMed2003

Biscarbene-ruthenium complexes in catalysis: novel stereoselective synthesis of (1E,3E)-1,4-disubstituted-1,3-dienes via head-to-head coupling of terminal alkynes and addition of carboxylic acids.

The reaction of a variety of alkynes RCtbd1;CH with a variety of carboxylic acids R(1)CO(2)H, in the presence of 5% of RuCl(COD)C(5)Me(5), selectively leads to the dienylesters (1E,3E)-RCH(1)=CH(2)-CH(3)=C(R)(O(2)CR(1)). The reaction also applies to amino acid and dicarboxylic acid derivatives. It is shown that the first step of the reaction consists of the head-to-head alkyne coupling and of the formation of the metallacyclic biscarbene-ruthenium complex isolated for R = Ph and catalyzing the formation of dienylester. D-labeled reactions show that the alkyne protons remain at the alkyne terminal carbon atoms and carboxylic acid protonates the C(1) carbon atom. QM/MM (ONIOM) calculations, supporting a mixed Fischer-Schrock-type biscarbene complex, show that protonation occurs preferentially at the carbene carbon C(1) adjacent to Ru, in the relative cis position with respect to the Ru-Cl bond, to give a mixed C(1)alkyl-C(4)carbene complex in which the C(4) carbene is conjugated with the noncoordinated C(2)=C(3) double bond. This 16-electron intermediate has a weak stabilizing alpha agostic C-H bond. This most stable isomer appears to have a C(4) center more accessible to the nucleophilic addition which accounts for the experimentally observed product.

Journal Article↗
PubMed2003

Mono-, di-, and Ttianionic beta-diketiminato ligands: a computational study and the synthesis and structure of [(YbL)(3)(THF)], L = [[N(SiMe(3))C(Ph)](2)CH].

A trinuclear Yb beta-diketiminato cluster [(YbL)3(THF)] (1) (L = {N(SiMe3)C(Ph)}2CH), containing L-1 and L-3 as well as Yb(II) and Yb(III) centers, was obtained by treatment of [YbL2] with Yb-naphthalene and was characterized by X-ray crystallography. The electron distribution in 1 and the Yb(II)/L-2 complex [Yb{(mu-L)Li(THF)}2] (2) was analyzed by DFT and ONIOM (QM/MM) calculations.

Journal Article↗
PubMed2003

Theoretical studies on the metathesis processes, (Tp(PH3)MR(eta 2-H[bond]CH3)]-->[Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3).

Theoretical calculations on the metathesis process, [Tp(PH3)MR(eta 2-H[bond]CH3)] --> [Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3), have been systematically carried out to study their detailed reaction mechanisms. Other than the one-step mechanism via a four-center transition state and the two-step mechanism through an oxidative addition/reductive elimination pathway, a new one-step mechanism, with a transition state formed under oxidative addition, has been found. Based on the intrinsic reaction coordinate calculations, we found that the trajectories of the transferring hydrogen atom in the metathesis processes studied are similar to each other regardless of the nature of reaction mechanisms.

Journal Article↗
PubMed2003

An oscillating C2(2-) unit inside a copper rectangle.

[Cu4(mu-dppm)4(mu4-eta1,eta2-C[triple bond]C-)]2+ has been shown by 31P and 1H NMR studies to undergo two fluxional processes in solution, the oscillation of the C[triple bond]C2- unit inside the copper rectangle and the flipping of the diphosphines, and this has been supported by DFT(B3LYP) calculations.

Journal Article↗
PubMed2003

Some structural and electronic properties of MX3 (M = Ln, Sc, Y, Ti+, Zr+, Hf+; X = H, Me, Hal, NH2) from DFT calculations.

The geometry of trivalent homoleptic d0 MX3 (X = H, Me, Hal, NH2) complexes for the entire lanthanide family, neutral group 3 and cationic group 4 metal center complexes have been studied with DFT(B3PW91) calculations. The geometrical parameters are in good agreement with the available experimental data. The degree of pyramidalization of the metal is discussed. The hydride and alkyl complexes are strongly pyramidal. In the case of the halide, a pyramidal structure is preferred for fluoride and the systems become increasingly planar with heavier halides. The geometrical trends with X are similar for group 3, group 4 and lanthanide complexes. However group 3 complexes are almost planar, group 4 strongly pyramidal and lanthanide intermediate. The lanthanide contraction is reproduced. A natural bond orbital (NBO) charge analysis is used to rationalize the results. This highlights the similarities and differences in the M-X bonding in the three families of complexes. In all cases, the pyramidalization is related to the participation of the valence d orbitals in the M-X bonds but the M-X bond is mostly ionic in lanthanide and considerably more covalent for the d transition metals. The hydride and alkyl complexes, which have more covalent character than the halide complexes are more pyramidal. In the case of the halide complexes, the fluoride complexes, in which there is the least population of the M d orbitals, are found to be more pyramidal because the increasing covalency with heavier halide stabilizes the planar structure through dpi-ppi interaction. The electronic metal d-p transition of the free ion is shown to be a good indicator of the pyramidalization at M although these values should only be used qualitatively. The strong ionic character of the Ln-X bond gives a rationale for the more important elongation of the beta Si-C bond in La(CH(SiMe3)2)3 than in La(N(SiMe3)2)3. The elongation is shown to be in part due to the negative hyperconjugation of the lone pair used for the Ln-ligand bonds in the beta bonds.

Journal Article↗
PubMed2002

Silyl, hydrido-silylene, or other bonding modes: some unusual structures of [(dhpe)Pt(SiHR2)]+ (dhpe = H2P-CH2-CH2-PH2; R = H, Me, SiH3, Cl, OMe, NMe2) and [(dhpe)Pt(SiR3)](+) (R = Me, Cl) from DFT calculations.

DFT (B3LYP) calculations have been carried out in order to quantitatively evaluate the energies and stereochemistry of the accessible structures of [(dhpe)Pt(SiHR(2))](+) (dhpe = H(2)P-CH(2)-CH(2)-PH(2); R = H, CH(3), SiH(3), Cl, OMe, SMe, NMe(2)) and of [(dhpe)Pt(SiR(3))](+) (R = CH(3), Cl). A number of different isomers have been located. The expected terminal silyl or hydrido-silylene complexes are often not the most stable complexes. An isomer in which an H or an R group bridges a Pt=SiHR or Pt=SiR(2) bond is found to compete with the terminal silyl or hydrido-silylene isomers. In some cases, isomers derived from cleavage of a C-H bond and formation of a silene or disilene ligand are obtained. The structures of the platinum silyls differ from that of the equivalent alkyl complex, calculated for [(dhpe)Pt(CH(3))](+).

Journal Article↗
PubMed2002

Vinyl C-F cleavage by Os(H)3Cl(P(i)Pr3)2.

Os(H)(3)ClL(2) (L = P(i)Pr(3)) reacts at 20 degrees C with vinyl fluoride in the time of mixing to produce OsHFCl([triple bond]CCH(3))L(2) and H(2). In a competitive reaction, the liberated H(2) converts vinyl fluoride to C(2)H(4) and HF in a reaction catalyzed by Os(H)(3)ClL(2). A variable-temperature NMR study reveals these reactions proceed through the common intermediate OsHCl(H(2))(H(2)C=CHF)L(2), via OsClF(=CHMe)L(2) and OsHCl(H(2))(C(2)H(4))L(2), all of which are detected. DFT(B3PW91) calculations of the potential energy and free energy at 298 K of possible intermediates show the importance of entropy to account for their thermodynamic accessibility. Calculations of unimolecular C-F cleavage of coordinated C(2)H(3)F confirms the high activation energy of this process. Catalysis by HF is thus suggested to account for the fast observed reactions, and scavenging of HF with NEt(3) changes the product to exclusively Os(H)(2)Cl(CCH(3))L(2). The analogous reaction of Os(H)(3)ClL(2) with H(2)C=CF(2) produces exclusively OsHFCl(=CCH(3))L(2) and HF, and the latter is again suggested to catalyze C-F scission via the observed intermediates Os(H)(2)Cl(CF(2)CH(3))L(2) and OsHCl(=CFMe)L(2).

Journal Article↗