Search PubMed⌕ Search

Biomedical subjects

O H Griffith

Publications and source records attributed to O H Griffith.

At least 37 records · Page 2Linked to original sources

Transition metal chelator TPEN counteracts phorbol ester-induced actin cytoskeletal disruption in C6 rat glioma cells without inhibiting activation or translocation of protein kinase C.

Phorbol ester-induced reorganization of the actin cytoskeleton was investigated in C6 rat glioma cells. Observations by fluorescence microscopy and photoelectron microscopy indicated that pretreatment with the transition metal chelator N,N,N',N'-tetrakis(2-pyridylmethyl)ethylenediamine (TPEN) for 1-2 h at 50 microM reduced the sensitivity of the actin cytoskeleton to disruption by the subsequent addition of 200 nM phorbol myristate acetate (PMA). The protective effect of TPEN was eliminated by adding back Zn2+ prior to PMA addition, implicating chelation of metal ions as the mechanism of action of TPEN. C6 cells exposed to PMA experience potent activation of protein kinase C (PKC) and substantial redistribution of the kinase from a soluble to a particulate cellular fraction (translocation). TPEN pretreatment did not block PKC translocation in PMA-exposed cells. By two-dimensional gel analysis, TPEN also did not reduce, but rather slightly increased, the PMA-stimulated phosphorylation of the acidic 80 kDa endogenous PKC substrate, as well as two other proteins at 18 kDa and 50 kDa. In contrast, TPEN significantly suppressed phosphorylation of a 20 kDa protein, both in cells treated with TPEN only and in TPEN-pretreated PMA-exposed cells. The results indicate that the ability of TPEN to protect against PKC-mediated actin cytoskeletal disruption is not due to either a block of PKC translocation or to general inhibition of PKC activity. Rather, the action of TPEN is more selective and probably involves chelation of Zn2+ at a critical Zn(2+)-dependent phosphorylation step downstream from the initial tumor promoter-induced effects on PKC.

Actins↗

Decreased phosphorylation of four 20-kDa proteins precedes staurosporine-induced disruption of the actin/myosin cytoskeleton in rat astrocytes.

The changes in protein phosphorylation and cytoskeletal structure preceding the dramatic morphological changes in staurosporine-treated rat astrocytes were examined, and the dependence of these effects on protein kinase C (PKC) was studied. Fluorescence and photoelectron microscopy revealed that a 20-min exposure to the kinase inhibitor staurosporine at 100 nM substantially decreased the thickness and linear appearance of actin microfilament bundles (stress fibers) prior to major changes in cell shape, while 60 min of staurosporine depleted virtually all microfilament bundles and caused arborization and contraction of the cell body. The distribution of myosin light chain (MLC) labeling within the cytoplasm was also dramatically altered by staurosporine, progressing from a linear punctate pattern coincident with the linear pattern of filamentous actin to a diffuse pattern in cells in which microfilament dissolution was taking place. Two-dimensional gel analysis of astrocyte phosphoproteins demonstrated 50-80% reduction of 32P incorporation into four 20-kDa spots, one of which was recognized by an antibody to MLC, following a 15-min treatment with 100 nM staurosporine. Depletion of functinal PKC from astrocytes by a 24-h exposure to phorbol myristate acetate prior to staurosporine exposure did not reduce the extent of the cytoskeletal alterations or alter the decrease in protein phosphorylation. Two other protein kinase inhibitors which affect astrocyte morphology, H-7 and the MLC kinase inhibitor ML-9, were also observed to disrupt microfilament bundles with accompanying decreases in 32P incorporation into these same phosphoproteins, whereas the more selective PKC inhibitor Ro 31-8220 did not do either. The early onset of decreased phosphorylation of the 20-kDa proteins supports a direct relationship between the rapid dissociation of myosin light chain from actin microfilament bundles, the disruption of actin patterns, and the subsequent morphological alterations. These data also suggest that staurosporine and H-7 may exert their effects via a pathway involving inhibition of MLC kinase.

1-(5-Isoquinolinesulfonyl)-2-Methylpiperazine↗

Photoelectron imaging of viruses and DNA: evaluation of substrates by unidirectional low angle shadowing and photoemission current measurements.

Photoelectron imaging (photoelectron emission microscopy, PEM or PEEM) is a promising high resolution surface-sensitive technique for biophysical studies. At present, image quality is often limited by the underlying substrate. For photoelectron imaging, the substrate must be electrically conductive, low in electron emission, and relatively flat. A number of conductive substrate materials with relatively low electron emission were examined for surface roughness. Low angle, unidirectional shadowing of the specimens followed by photoelectron microscopy was found to be an effective way to test the quality of substrate surfaces. Optimal results were obtained by depositing approximately 0.1 nm of platinum-palladium (80:20) at an angle of 3 degrees. Among potential substrates for photoelectron imaging, silicon and evaporated chromium surfaces were found to be much smoother than evaporated magnesium fluoride, which initially appeared promising because of its very low electron emission. The best images were obtained with a chromium substrate coated with a thin layer of dextran derivatized with spermidine, which facilitated the spreading and adhesion of biomolecules to the surfaces. Making use of this substrate, improved photoelectron images are reported for tobacco mosaic virus particles and DNA-recA complexes.

Bacteriophage phi X 174↗

A chemiluminescent substrate for the detection of phosphatidylinositol-specific phospholipase C.

A water-soluble, chemiluminescent substrate for sensitive detection of bacterial phosphatidylinositol-specific phospholipase C (PI-PLC) activity was synthesized. This was achieved by replacing the diacylglycerol moiety found in the natural substrate, phosphatidylinositol, by a dioxetane-containing moiety, resulting in the synthetic substrate (+/-)-3-(4-methoxyspiro[1,2-dioxetane-3,2'- tricyclo[3.3.1.1(3,7]decan]-4-yl)phenyl myo-inositol-1-O-hydrogen phosphate (LUMI-PI). PI-PLC-catalyzed cleavage of the phosphodiester bond of LUMI-PI results in the formation of a chemiluminescent precursor, the labile anion AMP-D, which decays with emission of light. An assay procedure was developed using 96-well microtiter plates with detection of the chemiluminescence on autoradiography film. With this procedure the detection limit of purified phospholipase C was about 10 pg. Furthermore, PI-PLC activity was readily detected in situ using small quantities (< 1 microliters) of liquid cultures of PI-PLC-producing bacterial strains.

Adamantane↗

Crystallization of phosphatidylinositol-specific phospholipase C from Bacillus cereus.

Phosphatidylinositol-specific phospholipase C (PI-PLC) cleaves phosphoinositides into two parts, lipid-soluble diacylglycerol and the water-soluble phosphorylated inositol. Two crystal forms of Bacillus cereus PI-PLC have been obtained by the vapor diffusion technique. Hexagonal crystals were grown from solutions containing polyethylene glycol (PEG; 4,000 to 8,000 D). The space group of these hexagonal crystals is P6(1)22 (or the enantiomorphic space group P6(5)22), with cell constants a = b = 133 A, and c = 231 A. The crystals diffract to 2.8 A. The second crystalline form was grown from a two-phase PEG (600 D)-sodium citrate solution. The phase diagram and PI-PLC distribution between phases has been determined. The enzyme crystallizes from the PEG-rich phase. The crystals are orthorhombic with space group P2(1)2(1)2(1) (a = 45 A, b = 46 A, c = 160 A), and contain one PI-PLC monomer per asymmetric unit. The orthorhombic crystals diffract to 2.5 A. Both the hexagonal and orthorhombic forms are suitable for crystallographic studies.

Bacillus cereus↗

Differential expression of phospholipase C specific for inositol phospholipids at the cell surface of rat glial cells and REF52 rat embryo fibroblasts.

Phosphatidylinositol(PI)-specific phospholipase C activity was detected on the surface of rat astrocytes, rat C6 glioma cells, and rat embryo (REF52) fibroblasts. The cell surface phospholipase C (ecto-PLC) activity was calcium-dependent, did not result from secreted phospholipase C, and was not released from the cell surface by bacterial PI-specific phospholipase C. Agents known to stimulate intracellular PI turnover, including carbachol, L-glutamic acid, acetylcholine, and orthovanadate, did not induce measurable alterations in the activity of the ecto-PLC. The expression of ecto-PLC activity by REF52 fibroblasts was density-dependent: subconfluent cultures of REF52 exhibited low levels of activity (less than 80 pmol of inositol phosphate formed/min/10(6) cells), whereas in confluent cultures ecto-PLC activity increased to approximately 300 pmol/min/10(6) cells. In contrast to this behavior and that exhibited by previously reported ecto-PLC-positive cell types, the ecto-PLC activity exhibited by astrocytes (approximately 1,000 pmol/min/10(6) cells) and by C6 glioma cells (approximately 100 pmol/min/10(6) cells) was independent of cell culture density up to confluence. The constitutive expression of ecto-PLC activity of astroglial cells may be related to their function as accessory cells in close association with neurons.

Animals↗

Substrate stereospecificity of phosphatidylinositol-specific phospholipase C from Bacillus cereus examined using the resolved enantiomers of synthetic myo-inositol 1-(4-nitrophenyl phosphate).

The substrate stereospecificity of phosphatidylinositol-specific phospholipase C from Bacillus cereus is examined using the resolved optical isomers of synthetic myo-inositol 1-(4-nitrophenyl phosphate), a chromogenic substrate for the phospholipase. The synthetic route employs mild acid-labile protecting groups and separation of the substituted myo-inositol enantiomers as the (-)-camphanyl ester diastereomers. Measurements of the initial rates of cleavage of the D and L enantiomers of the nitrophenyl substrate by phosphatidylinositol-specific phospholipase C from B. cereus show that this enzyme is essentially stereospecific for the D enantiomer. Under identical conditions, the rate of cleavage of the L isomer is less than 0.2% of that observed for the D isomer. The same is observed for the highly homologous enzyme from Bacillus thuringiensis. There is no measurable inhibition by the L enantiomer of the B. cereus enzyme acting on the D enantiomer, even when the molar ratio of L:D is 5, indicating that binding of the L enantiomer to the phospholipase is negligible. Thus, the enzyme active site is exquisitely sensitive to the stereochemistry of the myo-inositol group of the substrate.

Bacillus cereus↗

A high level of cell surface phosphatidylinositol-specific phospholipase C activity is characteristic of growth-arrested 3T3 fibroblasts but not of transformed variants.

Confluent monolayers of four contact-inhibited mouse fibroblast lines (Swiss 3T3, Balb/c 3T3, NIH 3T3, and C3H10T1/2) were found to have substantial levels of a cell surface phosphatidylinositol-specific phospholipase C (ecto-PLC). In contrast, confluent cultures of virally, chemically, or spontaneously transformed variants derived from these cell lines expressed undetectable or negligible levels of this enzyme activity. A simple and rapid assay, using lysophosphatidylinositol radio-labeled in the inositol group ([3H]-lysoPI) as the substrate was developed to provide a quantitative measure of the phospholipase C activity present at the external cell surface. For cells testing positive for ecto-PLC activity, rapid uptake of [3H]-lysoPI is accompanied by the simultaneous appearance of [3H]-inositol phosphate in the external medium. Confluent monolayers of the four mouse fibroblast lines exhibiting density-dependent growth inhibition had levels of ecto-PLC activity in the range of 50-800 pmol/min/10(6) cells (i.e., about 20-50 times greater than the activity observed for the transformed variants). The expression of ecto-PLC activity at the cell surface of the Swiss or Balb/c cells was dependent on the state of cell proliferation. Cultures which had become quiescent through attainment of confluence displayed a tenfold increased activity over that of subconfluent, growing cultures of these cells. Similarly, subconfluent Swiss 3T3 cells which had become quiescent following exposure to low serum conditions also showed increased activity. These results indicate that there may exist a correlation between the control of cell proliferation in contact-inhibited mouse fibroblasts and the expression of inositol phospholipid-specific phospholipase C activity at the external cell surface.

3T3 Cells↗

Emission microscopy and related techniques: resolution in photoelectron microscopy, low energy electron microscopy and mirror electron microscopy.

A unified treatment of the resolution of three closely related techniques is presented: emission electron microscopy (particularly photoelectron microscopy, PEM), low energy electron microscopy (LEEM), and mirror electron microscopy (MEM). The resolution calculation is based on the intensity distribution in the image plane for an object of finite size rather than for a point source. The calculations take into account the spherical and chromatic aberrations of the accelerating field and of the objective lens. Intensity distributions for a range of energies in the electron beam are obtained by adding the single-energy distributions weighted according to the energy distribution function. The diffraction error is taken into account separately. A working resolution is calculated that includes the practical requirement for a finite exposure time, and hence a finite non-zero current in the image. The expressions for the aberration coefficients are the same in PEM and LEEM. The calculated aberrations in MEM are somewhat smaller than for PEM and LEEM. The resolution of PEM is calculated to be about 50 A, assuming conventional UV excitation sources, which provide current densities at the specimen of 5 x 10(-5) A/cm2 and emission energies ranging up to 0.5 eV. A resolution of about 70 A has been demonstrated experimentally. The emission current density at the specimen is higher in LEEM and MEM because an electron gun is used in place of a UV source. For a current density of 5 x 10(-4) A/cm2 and the same electron optical parameters as for PEM, the resolution is calculated to be 27 A for LEEM and 21 A for MEM.

Mathematics↗

Low-energy electron microscopy (LEEM) and mirror electron microscopy (MEM) of biological specimens: preliminary results with a novel beam separating system.

Low-energy electron microscopy (LEEM) and mirror electron microscopy (MEM) utilize a parallel beam of slow-moving electrons backscattered from the specimen surface to form an image. If the electrons strike the surface an LEEM image is produced and if they are turned back just before reaching the surface an MEM image results. The applications thus far have been in surface physics. In the present study, applications of LEEM and MEM in the biological sciences are discussed. The preliminary results demonstrate the feasibility of forming images of uncoated cultured cells and cellular components using electrons in the threshold region (i.e. 0-10 V). The results also constitute a successful test of a novel beam-separating system for LEEM and MEM.

Animals↗

A fluorescent substrate for the continuous assay of phosphatidylinositol-specific phospholipase C: synthesis and application of 2-naphthyl myo-inositol-1-phosphate.

A fluorescent water-soluble substrate for phosphatidylinositol-specific phospholipase C was synthesized. The diacylglycerol moiety of the natural substrate, phosphatidylinositol, was replaced by the fluorescent moiety, 2-naphthol, resulting in the synthetic substrate, racemic 2-naphthyl myo-inositol-1-phosphate. The synthetic substrate provided a continuous fluorometric assay for the phosphatidylinositol-specific phospholipase C from Bacillus cereus. Initial rates of the cleavage of the 2-naphthyl substrate by the phospholipase measured by fluorometry were linear with time and the amount of enzyme added. The specific enzyme activity at pH 8.5 and 25 degrees C was about 0.04 mumol/min mg protein at an initial substrate concentration of 0.8 mM. 31P NMR experiments suggest that, as with phosphatidylinositol itself, cleavage of the fluorescent substrate proceeds in two steps via a myo-inositol-1,2-cyclic phosphate intermediate, and that only the D-isomer is a substrate for the B. cereus phospholipase. The synthetic substrate was stable during long-term storage as a solid in the dark at -20 degrees C. It was also stable for several weeks when stored in the dark frozen in aqueous solution near neutral pH.

Bacillus cereus↗

A chromogenic substrate for phosphatidylinositol-specific phospholipase C: 4-nitrophenyl myo-inositol-1-phosphate.

A chromogenic water-soluble substrate for phosphatidylinositol-specific phospholipase C was synthesized starting from myo-inositol employing isopropylidene and 4-methoxytetrahydropyranyl protecting groups. In this analogue of phosphatidylinositol, 4-nitrophenol replaces the diacylglycerol moiety, resulting in synthetic, racemic 4-nitrophenyl myo-inositol-1-phosphate. Using this synthetic substrate a rapid, convenient and sensitive spectrophotometric assay for the phosphatidylinositol-specific phospholipase C from Bacillus cereus was developed. Initial rates of the cleavage of the nitrophenol substrate were linear with time and the amount of enzyme used. At pH 7.0, specific activities for the B. cereus enzyme were 77 and 150 mumol substrate cleaved min-1 (mg protein)-1 at substrate concentrations of 1 and 2 mM, respectively. Under these conditions, less than 50 ng quantities of enzyme were easily detected. The chromogenic substrate was stable during long term storage (6 months) as a solid at -20 degrees C.

Chromogenic Compounds↗

Historical perspective and current trends in emission microscopy, mirror electron microscopy and low-energy electron microscopy. An introduction to the proceedings of the Second International Symposium and Workshop on Emission microscopy and Related Techniques.

Emission microscopes and related instruments comprise a specialized class of electron microscopes that have in common an acceleration field in combination with the first stage of imaging (i.e., an immersion objective lens, also called a cathode lens or emission lens). These imaging techniques include photoelectron emission microscopy (PEEM or PEM), electron emission induced by heat, ions, or neutral particles, mirror electron microscopy (MEM), and low-energy electron microscopy (LEEM), among others. In these instruments the specimen is placed on a flat cathode or is the cathode itself. The low-energy electrons that are emitted, reflected, or backscattered from the specimen are first accelerated and then imaged by means of an electron lens system resembling that of a transmission electron microscope. The image is formed in a parallel mode in all of the above instruments, in contrast to the image in scanning electron microscopes, where the information is collected sequentially by scanning the specimen. A brief history and introduction to emission microscopy, MEM, and LEEM is presented as a background for the Proceedings of the Second International Symposium and Workshop on this subject, held in Seattle, Washington, August 16-17, 1990. Current trends in this field gleaned from the presentations at that meeting are discussed.

China↗

Design and performance of a high-resolution photoelectron microscope.

The design of a high-resolution photoelectron microscope (photoelectron emission microscope) is described. It is an oil-free ultrahigh-vacuum instrument utilizing electrostatic electron optics. New designs are presented for a specimen translator, cathode stage, aperture stop control, electrostatic hexapole stigmator, beam shutter, and camera system. These components could also be used in a low-energy electron microscope (LEEM). The theoretical resolution of this instrument is 5 nm for UV illumination near the photoemission threshold. The photoelectron microscope is now in operation at the University of Oregon, and it is achieving results within a factor of two of this design limit.

Computer Terminals↗

A computer-aided control, design and image-processing system for electron microscopes.

A computer-control system for electron microscopes is described. The aim is to reduce a complex series of vacuum-system controls to a menu-driven program that simplifies the operation of the microscope. The system also incorporates image processing, notebook, computer-aided design, and communication functions. It is designed around a commercially available computer workstation. This system has been implemented on an institute-built photoelectron microscope of ultrahigh-vacuum design.

Computer Graphics↗

Biological applications of photoelectron imaging: a practical perspective.

Photoelectron imaging is finding a promising niche in the study of biological specimens. The features of photoelectron imaging that contribute to its uniqueness for this application are described. Image formation and the major contrast mechanisms of photoelectron microscopy, material contrast and topographical contrast are reviewed and illustrated with examples of photoelectron images of cultured cells and of DNA. General considerations in sample choice and preparation are also presented. Strategies for photoelectron labeling are discussed including the use of immunogold labeling, silver enhancement and cesium-based photocathodes.

Animals↗

High-level expression in Escherichia coli and rapid purification of phosphatidylinositol-specific phospholipase C from Bacillus cereus and Bacillus thuringiensis.

The construction of four vectors for high-level expression in Escherichia coli of the phosphatidylinositol-specific phospholipase C from Bacillus cereus or Bacillus thuringiensis is described. In all constructs the coding sequence for the mature phospholipase is precisely fused to the E. coli heat-stable enterotoxin II signal sequence for targeting of the protein to the periplasm. In one set of plasmids expression of the B. cereus or B. thuringiensis enzyme is under control of the E. coli alkaline phosphatase promoter, while in a second set of plasmids expression is under control of a lac-tac-tac triple tandem promoter. A simple and rapid procedure for complete purification of the phospholipase C overproduced in E. coli, involving isolation of the periplasmic proteins by osmotic shock followed by a single column chromatography step, is described. The largest quantity of purified enzyme, 40-60 mg per liter culture, is obtained with the plasmid expressing the B. cereus enzyme under control of the lac-tac-tac promoter. Lower quantities are obtained with the plasmids containing the alkaline phosphatase promoter (15-20 and 4-6 mg/liter for the B. cereus and B. thuringiensis enzymes, respectively) and with the plasmid expressing the B. thuringiensis phospholipase under control of the lac-tac-tac promoter (15-20 mg/liter). A comparison of the functional properties of the recombinant phospholipases with the native enzymes isolated from B. cereus or B. thuringiensis culture supernatant shows that they are identical with respect to their catalytic functions, viz., cleavage of phosphatidylinositol and cleavage of the glycosyl-phosphatidylinositol membrane anchor of bovine erythrocyte acetylcholinesterase.

Amino Acid Sequence↗