Search PubMed⌕ Search

Biomedical subjects

O Fayet

Publications and source records attributed to O Fayet.

At least 37 records · Page 2Linked to original sources

Translational frameshifting in the control of transposition in bacteria.

The expression of an increasing number of genes of both prokaryotic and eukaryotic origin has been shown to be regulated at the translational level by programmed (sequence-specific) ribosomal frameshifting. Among these are the bacterial insertion sequences IS1 and two members of the widely distributed IS3-family, IS150 and IS911. Frameshifting provides a means of specifying several proteins with different functions using a minimum of genetic information. In this review, we survey present understanding of the way in which frameshifting is integrated into the overall control of transposition activity in these elements.

Bacteria↗

Sequence analysis and phenotypic characterization of groEL mutations that block lambda and T4 bacteriophage growth.

The groES and groEL genes of Escherichia coli have been shown previously to belong to a single operon under heat shock regulation. Both proteins have been universally conserved in nature, as judged by the presence of similar proteins throughout evolution. The GroEL protein has been shown to bind promiscuously to many unfolded proteins, thus preventing their aggregation. ATP hydrolysis by GroEL results in the release of the bound polypeptides, a process that often requires the action of GroES. In an effort to understand GroEL and GroES structure and function, we have determined the nucleotide changes of nine mutant alleles of groEL. All of these mutant alleles were isolated because they block bacteriophage lambda growth. Our sequencing results demonstrate that (i) many of these alleles are identical, in spite of the fact that they were independently isolated, and (ii) most of the different alleles are clustered in the same region of the gene. One of the mutant alleles was shown to possess two nucleotide alterations in the groEL coding phase, one of which is located in a putative ATP-binding domain. The two nucleotide changes were separated by genetic engineering, and each individual change was shown to exert an effect on bacteriophage growth. But, using genetic analyses, we demonstrate that the restriction on bacterial growth at elevated temperatures is conferred only by the mutation within the putative ATP-binding domain. We have cloned the mutant alleles on multicopy plasmids and overexpressed their products. By testing for the ability of bacteriophage either to propagate or to form colonies at 43 degrees C, we have been able to divide the mutant proteins into those with no activity and those with residual activity under the various conditions tested.

Bacterial Proteins↗

Transposase-induced excision and circularization of the bacterial insertion sequence IS911.

We have investigated the role of three IS911-specified proteins in transposition in vivo: the products of the upstream (OrfA) and downstream (OrfB) open reading frames, and a transframe protein (OrfAB) produced by -1 translational frameshifting between orfA and orfB. The production of OrfAB alone is shown to lead both to excision and to circularization of the element and to be sufficient for intermolecular transposition into a plasmid target. Simultaneous and independent production of OrfA is shown to stimulate OrfAB-mediated intermolecular transposition while greatly reducing the appearance of transposon circles. We have not been able to detect a role for OrfB. Although under certain conditions, the vector plasmid undergoes precise resealing after IS911 excision, the data suggest that this is not normally the case and that the donor plasmid is not generally conserved. The use of IS911 derivatives carrying mutations in the terminal 2 bp suggested that circle formation represents a site-specific intramolecular transposition event. We present a model which explains both intra- and intermolecular transposition events in terms of a single reaction mechanism of the 'cut and paste' type.

Bacteria↗

arc-dependent thermal regulation and extragenic suppression of the Escherichia coli cytochrome d operon.

In a screen for Escherichia coli genes whose products are required for high-temperature growth, we identified and characterized a mini-Tn10 insertion that allows the formation of wild-type-size colonies at 30 degrees C but results in microcolony formation at 36 degrees C and above (Ts- phenotype). Mapping, molecular cloning, and DNA sequencing analyses showed that the mini-Tn10 insertion resides in the cydB gene, the distal gene of the cydAB operon (cytochrome d). The Ts- growth phenotype was also shown to be associated with previously described cyd alleles. In addition, all cyd mutants were found to be extremely sensitive to hydrogen peroxide. Northern (RNA) blot analysis showed that cyd-specific mRNA levels accumulate following a shift to high temperature. Interestingly, this heat shock induction of the cyd operon was not affected in an rpoH delta background but was totally absent in an arcA or arcB mutant background. Extragenic suppressors of the Cyd Ts- phenotype are found at approximately 10(-3). Two extragenic suppressors were shown to be null alleles in either arcA or arcB. One interpretation of our results is that in the absence of ArcA or ArcB, which are required for the repression of the cyo operon (cytochrome o), elevated levels of Cyo are produced, thus compensating for the missing cytochrome d function. Consistent with this interpretation, the presence of the cyo gene on a multicopy plasmid suppressed the Ts- and hydrogen peroxide-sensitive phenotypes of cyd mutants.

Bacterial Outer Membrane Proteins↗

The lethal phenotype caused by null mutations in the Escherichia coli htrB gene is suppressed by mutations in the accBC operon, encoding two subunits of acetyl coenzyme A carboxylase.

Insertion mutations in the Escherichia coli htrB gene result in the unique phenotype of not affecting growth at temperatures below 32.5 degrees C but leading to a loss of viability at temperatures above this in rich media. When htrB bacteria growing in rich media were shifted to the nonpermissive temperature of 42 degrees C, they continued to grow at a rate similar to that at 30 degrees C but they produced phospholipids at the rate required for growth at 42 degrees C. This led to the accumulation of more than twice as much phospholipid per milligram of protein compared with that in wild-type bacteria. Consistent with HtrB playing a role in phospholipid biosynthesis, one complementation group of spontaneously arising mutations that suppressed htrB-induced lethality were mapped to the accBC operon. This operon codes for the biotin carboxyl carrier protein and biotin carboxylase subunits of the acetyl coenzyme A carboxylase enzyme complex, which catalyzes the first step in fatty acid biosynthesis. Four suppressor mutations mapped to this operon. Two alleles were identified as mutations in the accC gene, the third allele was identified as a mutation in the accB gene, and the fourth allele was shown to be an insertion of an IS1 transposable element in the promoter region of the operon, resulting in reduced transcription. The suppressor mutations caused a decrease in the rate of phospholipid biosynthesis, restoring the balance between the biosynthesis of phospholipids and growth rate, thus enabling htrB bacteria to grow at high temperatures.

Acetyl-CoA Carboxylase↗

Programmed translational frameshifting and initiation at an AUU codon in gene expression of bacterial insertion sequence IS911.

The proteins expressed by insertion sequence IS911, a member of the widespread IS3 family of elements, have been analyzed. The results indicate that three major species are produced from two consecutive reading frames. A protein of Mr 11,500, ORFA, is synthesized from an upstream reading frame. A larger protein, ORFAB, uses the same initiation codon and is produced by a -1 programmed translational frameshift between orfA and a downstream frame, orfB, whose amino acid sequence shows significant homology with retroviral integrase proteins. The orfB frame is also expressed independently in two alternative forms: the first uses a rare AUU initiation codon in the orfB phase whereas the second appears to initiate in the orfA phase and is produced by a -1 frameshift mechanism similar to that used in ORFAB expression. A specific IS911 integration reaction using a minimal active junction composed of 51 base-pairs of the right inverted repeat and a flanking phase lambda sequence resembling a second end in inverted orientation has been developed to analyze the functions of these proteins by transcomplementation in vivo. The orfA and orfB frames are shown to be essential and production of ORFAB is shown to stimulate integration in this system, suggesting that this fusion protein is the IS911 transposase.

Amino Acid Sequence↗

Translational control of transposition activity of the bacterial insertion sequence IS1.

The experiments reported here provide strong evidence indicating that the transposition frequency of the bacterial insertion sequence IS1 is determined principally by two IS1-specified proteins. The first, InsA, was previously shown to bind to the ends of the element and to act as a repressor. We present both physical and genetic evidence which reveals that the second, the InsAB' transposase, is a fusion of InsA with the product of a downstream reading frame, InsB'. Synthesis of this protein occurs by a -1 frameshift between the insA and insB' frames. It requires the presence of an intact retroviral-like frameshift signal composed of an A6C motif and a downstream region able to form several alternative secondary structures. In vivo studies show that IS1 transposition activity depends on the relative rather than on the absolute levels of InsA and InsAB'. The ratio is determined primarily at the translational level by frameshifting and appears to be relatively insensitive to large variations in levels of transcription. This novel homeostatic control could therefore protect IS1 from activation as a consequence of insertion into active transcription units.

Base Composition↗

Isolation and characterization of the Escherichia coli htrB gene, whose product is essential for bacterial viability above 33 degrees C in rich media.

We have identified and studied the htrB gene of Escherichia coli. Insertional inactivation of the htrB gene leads to bacterial death at temperatures above 33 degrees C. The mutant bacterial phenotype at nonpermissive temperatures includes an arrest of cell division followed by the formation of bulges or filaments. The htrB+ gene has been cloned by complementation and shown to reside at 23.4 min on the E. coli genetic map, the relative order of the neighboring loci being mboA-htrB-pyrC. The htrB gene is transcribed in a counterclockwise fashion, relative to the E. coli genetic map, and its product has been identified as a membrane-associated protein of 35,000 Da. Growth experiments in minimal media indicate that the HtrB function becomes dispensable at low growth rates.

Cloning, Molecular↗

Functional similarities between retroviruses and the IS3 family of bacterial insertion sequences?

Members of the IS3 family of insertion sequences are found in a wide range of bacteria. At least 10 members of this family carry two major open reading frames: a small upstream frame (0 phase), and a longer downstream frame in the -1 phase. The downstream frame shows significant similarity at the amino acid level. A highly conserved region of this frame also exhibits notable similarity with a region of the integrase (endonuclease) domain of retroviruses. Although the overall transposition mechanism of the insertion sequence and retroviral elements is certainly different, the two groups may share additional common features, including a -1 frameshift resulting in the production of a fusion protein.

Amino Acid Sequence↗

Cloning, mapping, and sequencing of the gene encoding Escherichia coli quinoprotein glucose dehydrogenase.

Escherichia coli contains pyrroloquinoline quinone-dependent glucose dehydrogenase. We cloned and sequenced the gene (gcd) encoding this enzyme and showed that the derived amino acid sequence is highly homologous to that of the gdhA gene product of Acinetobacter calcoaceticus. Stretches of homology also exist between the amino acid sequence of E. coli glucose dehydrogenase and other pyrroloquinoline quinone-dependent dehydrogenases from several bacterial species. The position of gcd on the chromosomal map of E. coli was determined to be at 3.1 min.

Amino Acid Sequence↗

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences.

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.

Amino Acid Sequence↗

The groES and groEL heat shock gene products of Escherichia coli are essential for bacterial growth at all temperatures.

The products of the groES and groEL genes of Escherichia coli, constituting the groE operon, are known to be required for growth at high temperature (42 degrees C) and are members of the heat shock regulon. Using a genetic approach, we examined the requirement for these gene products for bacterial growth at low temperature (17 to 30 degrees C). To do this, we constructed various groES groEL heterodiploid derivative strains. By inactivating one of the groE operons by a polar insertion, it was shown by bacteriophage P1 transduction that at least one of the groE genes was essential for growth at low temperature. Further P1 transduction experiments with strains that were heterodiploid for only one of the groE genes demonstrated that both groE gene products were required for growth at low temperature, which suggested a fundamental role for the groE proteins in E. coli growth and physiology.

Bacterial Proteins↗

Identification, characterization, and mapping of the Escherichia coli htrA gene, whose product is essential for bacterial growth only at elevated temperatures.

We identified and cloned an Escherichia coli gene called htrA (high temperature requirement). The htrA gene was originally discovered because mini-Tn10 transposon insertions in it allowed E. coli growth at 30 degrees C but prevented growth at elevated temperatures (above 42 degrees C). The htrA insertion mutants underwent a block in macromolecular synthesis and eventually lysed at the nonpermissive temperature. The htrA gene was located at approximately 3.7 min (between the fhuA and dapD loci) on the genetic map of E. coli and between 180 and 187.5 kilobases on the physical map. It coded for an unstable, 51-kilodalton protein which was processed by removal of an amino-terminal fragment, resulting in a stable, 48-kilodalton protein.

Chromosome Mapping↗

Method for localization of cloned DNA fragments on the Escherichia coli chromosome.

In exponentially growing cultures of Escherichia coli strains carrying the dnaC28 mutation, DNA replication can be synchronized by temperature changes (R. L. Rodriguez, M. S. Dalbey, and C. I. Davern, J. Mol. Biol. 74:599-604, 1973). We used this synchronization procedure and DNA-DNA hybridization to develop a technique for the localization of cloned chromosomal fragments on the genetic map. Because of the bidirectional nature of replication in E. coli, our method gave two possible positions (one on each replication arm). However because of the precision obtained for each position (+/- 1 map unit), the final mapping with various genetic techniques was greatly facilitated. Using this technique and a simple chromosomal mobilization test, we located at 93.2 +/- 1 min a cloned DNA fragment carrying an extragenic suppressor of dnaA46, a thermosensitive mutation in the dnaA initiation gene. Further analysis showed that the groES (mopA) and groEL (mopB) genes, both located at 94.2 min on the standard map, were indeed carried by the cloned suppressor fragment.

Chromosome Mapping↗

Suppression of the Escherichia coli dnaA46 mutation by amplification of the groES and groEL genes.

A lambda hybrid phage (lambda Sda1), containing an 8.1 kb EcoRI DNA fragment from the Escherichia coli chromosome, was selected on the basis of its ability to suppress bacterial thermosensitivity caused by the dnaA46 mutation. We have shown that this suppression is due to a recA+-dependent amplification of the 8.1 kb fragment; consistent with this observation, cloning of the 8.1 kb fragment into a high copy number plasmid (pBR325) leads also to suppression of dnaA46. In the suppressed strains growing at high temperature, bidirectional replication starts in or near the oriC region and requires the presence of the DnaA polypeptide. These findings suggest that the overproduction of a gene product(s), encoded by the cloned 8.1 kb fragment, can restore dnaA-dependent initiation of replication at high temperature in the oriC region. Genetic mapping shows that the groES (mopB) and groEL (mopA) genes are located on the 8.1 kb suppressor fragment. Further analysis, including in vitro mutagenesis and subcloning, demonstrates that the amplification of the groES and groEL genes is both necessary and sufficient to suppress the temperature sensitive phenotype of the dnaA46 mutation.

Alleles↗

Multiple origin usage for DNA replication in sdrA(rnh) mutants of Escherichia coli K-12. Initiation in the absence of oriC.

In stable DNA replication (sdrA/rnh) mutants of Escherichia coli, initiation of rounds of DNA replication occurs in the absence of the normal origin of replication, oriC. To determine whether or not the initiation occurs at a fixed site(s) on the chromosome in sdrA mutants, the DNA from exponentially growing sdrA mutant cells with or without the oriC site (delta oriC) was analyzed for the relative copy numbers of various genes along the chromosome. The results suggest that there are at least four fixed sites or regions of the sdrA delta oriC chromosome from which DNA replication can be initiated in the absence of the oriC sequence.

Chromosome Mapping↗

Beta-lactamase-specifying plasmids isolated from Neisseria gonorrhoeae have retained an intact right part of a Tn3-like transposon.

In three beta-lactamase-producing strains of Neisseria gonorrhoeae, ampicillin resistance is due to the presence of a 7.4-kilobase plasmid. Heteroduplex analysis has shown that the R plasmid contains a 1.6-kilobase segment homologous to the right part (the region coding for the beta-lactamase) of the Tn3-like transposon Tn2301 the 1.6-kilobase DNA segment is not transposable, but it can give rise to a functional transposon, when linked to the left part of TN2301. This provides strong evidence that the R plasmids of N. gonorrhoeae are deletion derivatives of a plasmid that contained an entire TN3-like transposon.

Ampicillin↗