Search PubMed⌕ Search

Biomedical subjects

O E Nelson

Publications and source records attributed to O E Nelson.

At least 19 recordsLinked to original sources
PubMed1993

Maize bronze 1:dSpm insertion mutations that are not fully suppressed by an active Spm.

The Suppressor-mutator (Spm) family of maize transposable elements consists of autonomous Spm elements and nonautonomous defective Spm (dSpm) elements. One characteristic of this family is that the insertion of dSpm elements into a structural gene often permits some level of structural gene expression in the absence of SpM activity, and this structural gene expression is suppressed in trans by Spm activity. The Spm's subterminal repetitive regions (SRRs) contain several iterations of a 12-bp repeat motif. It had been proposed that binding of an Spm-encoded protein to these repeat motifs blocks structural gene transcriptional readthrough, thus suppressing gene expression. The bz-m13 allele of the bronze 1 locus contains a 2.24-kb dSpm insertion in the second exon of a Bz allele. In the absence of Spm activity, bz-m13 displays substantial Bz expression, and this expression is fully suppressed by Spm. Four intra-dSpm deletion derivatives are described in which this Bz expression is only partially suppressed by Spm. Each of these derivatives retains at least 12 SRR repeat motifs. Thus the presence of these repeat motifs is not sufficient to guarantee complete suppression by Spm. Some other property such as secondary structure or element size must play a role.

Alleles↗
PubMed1992

Alternative 3' splice acceptor sites modulate enzymic activity in derivative alleles of the maize bronze1-mutable 13 allele.

The defective Suppressor-mutator (dSpm)-induced allele bronze1-mutable 13 (bz1-m13) and many of its derivative alleles are leaky mutants with measurable levels of flavonol O3-glucosyltransferase activity. This activity results from splicing at acceptor site-1, one of two cryptic 3' splice sites within the dSpm insertion in bz1-m13. In this study, splicing in bz1-m13 change-in-state (CS) alleles CS-3 and CS-64 was shown to be altered from bz1-m13; previous work found altered splicing in CS-9. CS-64 is a null allele and lacks the acceptor site-1-spliced transcript because this site is deleted. CS-3 and CS-9 had increased levels of the acceptor site-1 transcript relative to bz1-m13 and increased enzymic activities. A deletion in CS-9 altered splicing by eliminating acceptor site-2. Both acceptor sites were intact in CS-3, but a deletion removed most of a 275-bp GC-rich sequence in dSpm. This suggests that GC-rich sequences affect splicing and is consistent with models postulating a role for AU content in the splicing of plant introns. Splicing does not necessarily occur, however, at the junction of AU-rich intron sequences and GC-rich exon sequences.

Alleles↗
PubMed1991

Analysis of maize brittle-1 alleles and a defective Suppressor-mutator-induced mutable allele.

A mutant allele of the maize brittle-1 (bt1) locus, brittle-1-mutable (bt1-m), was shown genetically and molecularly to result from the insertion of a defective Suppressor-mutator (dSpm) transposable element. An Spm-hybridizing restriction enzyme fragment, which cosegregates with the bt1-m allele and is absent from wild-type revertants of bt1-m, was identified and cloned. Non-Spm portions of it were used as probes to identify wild-type (Bt1) cDNAs in an endosperm library. The 4.3-kb bt1-m genomic clone contains a 3.3-kb dSpm, which is inserted in an exon and is composed of Spm termini flanking non-Spm sequences. RNA gel blot analyses, using a cloned Bt1 cDNA probe, indicated that Bt1 mRNA is present in the endosperm of developing kernels and is absent from embryo or leaf tissues. Several transcripts are produced by bt1-m. The deduced translation product from a 1.7-kb Bt1 cDNA clone has an apparent plastid transit peptide at its amino terminus and sequence similarity to several mitochondrial inner-envelope translocator proteins, suggesting a possible role in amyloplast membrane transport.

Alleles↗
PubMed1990

Many maize inbreds lack an endosperm cytosolic phosphoglucomutase.

Starch gel electrophoresis of extracts from developing maize (Zea mays L.) endosperms 22 days postpollination reveals only a single zone of phosphoglucomutase activity in the majority of the inbreds tested. The other inbreds had the expected two zones of activity. The activity that is present in all inbreds is the amyloplast isozyme while the absent form is a cytosolic enzyme. The lack of the cytosolic isozyme has no discernible phenotypic consequences.

Journal Article↗
PubMed1989

Tissue-specific effects of maize bronze gene promoter mutations induced by Ds1 insertion and excision.

Bz-wm is an allele of the Bz locus of maize isolated by McClintock (1962) as a derivative of bz-m2. It contains a Ds1 insertion 63 bp upstream of the start of transcription and a 3 bp insertion in the coding region at the site of the Ac element that was present in bz-m2. Bz-wm produces, in the aleurone layer of the endosperm, low amounts (approximately 1% of wild-type) of a Bz-gene encoded UDP-glucose: flavoid 3-0-glucosyltransferase (UFGT) polypeptide with altered thermal stability. Three phenotypically wild-type derivatives, Bz' (wm)-1, Bz' (wm)-2 and Bz' (wm)-3, were isolated in the presence of Ac and shown to have excised the Ds1 element but not fully restored UFGT activity in endosperm assays. In the studies reported here, we have further analyzed these Bz' derivatives of Bz-wm by determining the DNA sequences left behind on Ds1 excision, and by measuring the amount of UFGT activity and/or Bz mRNA conditioned by Bz-wm and the Bz' derivatives in different tissues. The data indicate that tissue-specific differences in expression of the Bz gene have been produced in alleles with mutations caused by transposable elements Ac and Ds. These mutations may affect either the amount of Bz transcription or the stability of the UFGT polypeptide. The sequence or spacing in the -63 region of the Bz promoter appears to be critical for maximum expression in aleurone and husk but not in pollen and pigmented seedling tissue.

Alleles↗
PubMed1988

Molecular characterization of suppressor-mutator (Spm)-induced mutations at the bronze-1 locus in maize: the bz-m13 alleles.

The bz-m13 allele of maize contains a defective Suppressor-mutator (dSpm) transposable element and gives rise to a variety of stable and unstable derivatives in the presence of an autonomous Suppressor-mutator (Spm) element. The dSpm-13 element of bz-m13 consists of 2,241 base pairs (bp) and is located within the second exon of the bronze-1 (bz) gene. A number of the stable derivatives, both functional and nonfunctional, derived from bz-m13 were characterized molecularly. Results from genomic DNA blotting experiments indicate that the dSpm-13 element had excised from the locus in each stable derivative analyzed. The unstable derivatives bz-m13CS9 and bz-m13CS6 contain dSpm elements in the same position and orientation as the dSpm-13 element, but they differ in the length of the element. The dSpm-13CS9 element is 902 bp and arose via a deletion between two 5-bp direct repeats within the dSpm-13 element. The dSpm-13CS6 element is 2,239 bp and only differs from dSpm-13 by a 2-bp deletion at the end of one of the 13-bp terminal inverted repeats. The effect of these deletions on the frequency and timing of Spm-induced excision is discussed herein. In the absence of Spm, each of the bz-m13 alleles conditions a nonmutant phenotype despite the presence of the insertions in the second exon. The role of RNA splicing in this phenomenon and the recent finding of an acceptor splice site within the terminal inverted repeat are also discussed.

Alleles↗
PubMed1988

Two mutations in a maize bronze-1 allele caused by transposable elements of the Ac-Ds family alter the quantity and quality of the gene product.

The Dissociation (Ds) mutant, Bz-wm, of the maize bronze-1 (bz) locus conditions a leaky phenotype. Plants carrying this mutant allele synthesize a low amount of an altered Bz gene product, which leads to reduced anthocyanin pigmentation in the seed. The molecular analysis reported here shows that the Bz-wm mutant has a 406-bp Ds1 insertion located 63 bp 5' to the start of Bz transcription. Furthermore, the Bz-wm allele contains three additional base pairs within the second exon, relative to the wild-type Bz allele. These additional nucleotides are believed to be derived from the 8-bp target site duplication created by an Activator (Ac) element in a previous allele in the series. The biochemical and molecular analyses of Bz-wm and revertants of Bz-wm indicate that the three additional nucleotides are responsible for the altered enzyme stability, while the Ds1 element affects the steady-state level of Bz-specific protein and RNA. Since the two mutations present in the Bz-wm mutant were each caused by the action of the Ac-Ds transposable element system, these results provide new insights into the ways that transposable elements can modify maize gene expression.

Alleles↗
PubMed1988

The mutation bronze-mutable 4 derivative 6856 in maize is caused by the insertion of a novel 6.7-kilobase pair transposon in the untranslated leader region of the bronze-1 gene.

The Ds-controlled allele, bz-m4 Derivative 6856 [bz-m4 D6856], is reported to have an altered temporal- and tissue-specific pattern of gene expression. We have cloned this allele and have characterized it at the molecular level. The mutation was caused by the insertion of a complex transposon-like structure 36 base pairs downstream from the Bz mRNA cap site. The insert is 6.7-kbp long. Ds elements, each approximately 2 kbp in length, are at both ends of the insert. The sequence between the Ds elements is a partial duplication of flanking sequences from the 3' end of the Bz gene. These data suggest that Ds initially inserted near the 3' end of the gene and mobilized adjacent sequences as it transposed.

Base Sequence↗
PubMed1987

RNA splicing permits expression of a maize gene with a defective Suppressor-mutator transposable element insertion in an exon.

The bz-m13CS9 allele of the bronze-1 gene in maize contains a 902-base-pair defective Suppressor-mutator (dSpm) transposable element in the second exon. Nevertheless, 40-50% of the enzymatic activity conditioned by a nonmutant allele at the bronze-1 locus is routinely recovered in crude extracts prepared from plants carrying bz-m13CS9 in the absence of an autonomous Suppressor-mutator element. Analyses of RNAs produced by such plants show that transcription proceeds through the dSpm. The dSpm sequence of the messenger RNA precursor is then removed by RNA splicing using the donor site of the single bronze-1 intron and an acceptor site within the inverted terminal repeat of the dSpm. This results in a messenger RNA with the proper reading frame that could produce a functional enzyme. These data demonstrate that this dSpm insertion in an exon of a structural gene has produced a functional allele with a novel intron consisting, in part, of the dSpm. This mechanism appears to allow dSpm elements to reduce the impact of their insertions on gene expression.

Alleles↗
PubMed1985

Deletions within a defective suppressor-mutator element in maize affect the frequency and developmental timing of its excision from the bronze locus.

Six independent derivatives of the bz-m13 allele, which contains a 2.2-kilobase-pair defective Suppressor-mutator (dSpm) insertion at the bronze (bz) locus, have been isolated and analyzed. The derivatives were selected for alterations in the frequency and timing of somatic reversion; such derivatives have previously been analyzed genetically and designated "changes in state" by McClintock [McClintock, B. (1955) Carnegie Inst. Washington, Yearb. 54, 245-255]. All of the derivatives analyzed in the present study revert substantially later in development than the original insertion mutation and some show a very low frequency of reversion as well. All of the derivatives contain insertions at the same site as the parent bz-m13 allele. Deletions of 400-1300 base pairs were found in the dSpm elements in four of the six derivatives; the remaining derivatives could not be distinguished structurally from the original mutant allele. The results suggest that changes in the frequency and developmental timing of excision are attributable to alterations in the dSpm element. Furthermore, these data suggest that DNA sequences near the ends of the element are important for responding to the two transacting functions supplied by the transposition-competent Suppressor-mutator (Spm) element.

Base Sequence↗
PubMed1984

Cloning of the bronze locus in maize by a simple and generalizable procedure using the transposable controlling element Activator (Ac).

The bronze (bz) locus of maize has been cloned by an indirect procedure utilizing the cloned transposable controlling element Activator (Ac). Restriction endonuclease fragments of maize DNA were cloned in bacteriophage lambda and recombinant phage with homology to the center of the Ac element were isolated. The cloned fragments were analyzed to determine which contained sequences that were structurally identical to a previously isolated Ac element. Two such fragments were identified. Sequences flanking the Ac element were subcloned and used to probe genomic DNA from plants with well-defined mutations at the bz locus. By this means, it was established that one of the genomic clones contained a bz locus sequence. The subcloned probe fragment was then used to clone a nonmutant Bz allele of the locus. The method described here should prove useful in cloning other loci with Ac insertion mutations.

Journal Article↗
PubMed1984

[C]Sucrose Uptake and Labeling of Starch in Developing Grains of Normal and segl Barley.

Previous work showed that the segl mutant of barley (Hordeum vulgare cv Betzes) did not differ from normal Betzes in plant growth, photosynthesis, or fertility, but it produced only shrunken seeds regardless of pollen source. To determine whether defects in sucrose uptake or starch synthesis resulted in the shrunken condition, developing grains of Betzes and segl were cultured in [(14)C]sucrose solutions after slicing transversely to expose the endosperm cavity and free space. In both young grains (before genotypes differed in dry weight) and older grains (17 days after anthesis, when segl grains were smaller than Betzes), sucrose uptake and starch synthesis were similar in both genotypes on a dry weight basis. To determine if sucrose was hydrolyzed during uptake, spikes of Betzes and segl were allowed to take up [fructose-U-(14)C]sucrose 14 days after anthesis and the radioactivity of endosperm sugars was examined during 3 hours of incubation. Whereas less total radioactivity entered the endosperm and the endosperm cavity (free space) of segl, in both genotypes over 96% of the label of endosperm sugars was in sucrose, and there was no apparent initial or progressive randomization of label among hexose moieties of sucrose as compared to the free space sampled after 1 hour of incubation. We conclude that segl endosperms are capable of normal sucrose uptake and starch synthesis and that hydrolysis of sucrose is not required for uptake in either genotype. Evidence suggests abnormal development of grain tissue of maternal origin during growth of segl grains.

Journal Article↗
PubMed1984

A debranching enzyme deficiency in endosperms of the sugary-1 mutants of maize.

Many of the sugary-1 mutants of maize (Zea mays L.) have the highly branched water-soluble polysaccharide, phytoglycogen, in quantities equal to or greater than starch as an endosperm storage product in mature seeds. We find that all sugary mutants investigated are deficient in debranching enzyme [alpha-(1, 6)-glucosidase] activity in endosperm tissue 23 days postpollination and suggest that this deficiency is the primary biochemical lesion leading to phytoglycogen accumulation in sugary endosperms. This would indicate that the amylopectin component of starch depends on an equilibrium between the activities of branching enzymes introducing alpha-1,6 branch points into the linear alpha-1,4 glucans and debranching enzymes. The debranching enzyme activities from nonsugary endosperms can be separated into three peaks on a hydroxyapatite column. The sugary endosperm extracts lack one of these peaks of activity while the other two fractions have much reduced activity. The embryos of developing seeds (23 days after pollination) from both sugary and nonsugary genotypes have equivalent debranching activity. The debranching enzyme activity of developing endosperms is proportional to the number of copies (0 to 3) of the nonmutant (Su) allele present suggesting that the Su allele may be the structural gene for this debranching enzyme, although this is not definitive. This identification of debranching enzyme activity as being the biochemical lesion in sugary endosperms is consistent with several previous observations on the mutant.

Journal Article↗
PubMed1983

Biochemical consequences of the insertion of a suppressor-mutator (Spm) receptor at the bronze-1 locus in maize.

Transposition of a receptor element (Rs) for the suppressor-mutator (Spm) has generated the first Spm-controlled mutable allele of the bronze-1 (bz) locus in maize (Zea mays L.). In the absence of Spm, bz-m13 conditions full anthocyanin pigmentation in the aleurone but has a markedly decreased level compared to wild type of the gene product, UDPglucose:flavonol 3-O-glucosyltransferase (UFGT; EC 2.4.1.91). This UFGT activity appears to be qualitatively similar to the wild-type enzyme. Throughout endosperm development, the amount of a crossreactive material far exceeds the amount of detectable UFGT activity. This and other observations suggest that this insertion of Rs leads to the production of two polypeptides from the bz-m13 allele.

Journal Article↗
PubMed1983

Growth characteristics, grain filling, and assimilate transport in a shrunken endosperm mutant of barley.

The reported inheritance pattern of the seg1 shrunken endosperm mutant of barley (Hordeum vulgare L. cv Betzes) suggests that some defective process in the maternal plant tissues, and not in the endosperm, prevents normal grain filling in the mutant. To identify the physiological mechanism of the mutation, we compared growth, carbon exchange, and assimilate transport of Betzes and seg1 plants. Betzes and seg1 plants did not differ in mean relative growth rate, mean net assimilation rate, or carbon exchange rate. The rate and duration of grain growth of seg1 was lower than Betzes on intact plants and on detached, cultured spikes. Increasing the supply of sucrose in culture media up to 300 mm sucrose did not eliminate differences between normal and mutant grain growth. Translocation of (14)C-labeled assimilates into seg1 grains ceased by 21 days after anthesis, and assimilates were diverted to lower plant parts. In contrast, assimilates were still entering Betzes grains at 29 days after anthesis. Evidence suggests that some maternal spike or grain tissue is affected by the mutation after the onset of grain filling. Identification of the specific seg1 defect may provide information about the cessation of normal grain filling.

Journal Article↗