Search PubMed⌕ Search

Biomedical subjects

Nicolas Mano

Publications and source records attributed to Nicolas Mano.

17 recordsLinked to original sources
PubMed2006

Redox potentials of the blue copper sites of bilirubin oxidases.

The redox potentials of the multicopper redox enzyme bilirubin oxidase (BOD) from two organisms were determined by mediated and direct spectroelectrochemistry. The potential of the T1 site of BOD from the fungus Myrothecium verrucaria was close to 670 mV, whereas that from Trachyderma tsunodae was >650 mV vs. NHE. For the first time, direct electron transfer was observed between gold electrodes and BODs. The redox potentials of the T2 sites of both BODs were near 390 mV vs. NHE, consistent with previous finding for laccase and suggesting that the redox potentials of the T2 copper sites of most blue multicopper oxidases are similar, about 400 mV.

Amino Acid Sequence↗
PubMed2006

A laccase-wiring redox hydrogel for efficient catalysis of O2 electroreduction.

Laccase was earlier wired to yield an O2 electroreduction catalyst greatly outperforming platinum and its alloys. Here we describe the design, synthesis optimization of the composition, and characterization of the +0.55 V (AgAgCl) laccase-wiring redox hydrogel, with an apparent electron diffusion coefficient (D(app)) of 7.6 x 10(-7) cm2 s(-1). The high D(app) results in the tethering of redox centers to the polymer backbone through eight-atom-long spacer arms, which facilitate collisional electron transfer between proximal redox centers. The O2 flux-limited, true-area-based current density was increased from the earlier reported 560 to 860 microA cm(-2). When the O2 diffusion to the 7-microm-diameter carbon fiber cathode was cylindrical, half of the O2 flux-limited current was reached already at 0.62 V and 90% at 0.56 V vs Ag/AgCl, merely -0.08 and -0.14 V versus the 0.7 V (Ag/AgCl) reversible O2/H2O half-cell potential at pH 5.

Catalysis↗
PubMed2006

A potentially insect-implantable trehalose electrooxidizing anode.

The dominant sugar in the body fluids of many insects is not glucose, the sugar of the vertebrates, but trehalose. In a step toward a cell that would operate in insects, we describe here a trehalose electrooxidizing anode. The novel component of the anode is its engineered, trehalose oxidation catalyzing, FAD-glucose-3-dehydrogenase (G3DH). Screening for gene-sources of G3DH pointed to the G3DH of Agrobacterium tumefaciens. Sequencing of the A. tumefaciens genome revealed a 1.7 kb fragment which contained the G3DH coding gene. The fragment was isolated, cloned and expressed in E. coli strain BL-21, to yield the approximately 65 kDa his-tagged flavoenzyme, with a specific activity of approximately 2.5U/mg protein. Electrical wiring of its reaction center to a carbon electrode through a high apparent electron diffusion coefficient (5.8 x 10(-6)cm(2)/s) redox hydrogel with a -0.2V versus Ag/AgCl redox potential resulted in the trehalose electrooxidizing anode. Trehalose was electrooxidized at pH 7.2 already at -0.36 V versus Ag/AgCl. At 0 V versus Ag/AgCl the trehalose electrooxidation current density was 0.1 mA/cm(2).

Animals↗
PubMed2005

Bioelectrochemical propulsion.

A carbon fiber having a terminal glucose oxidizing microanode and an O2 reducing microcathode is propelled at the water-O2 interface. The electron current in the fiber is accompanied by a flux of hydrated protons that is so fast at the solution-air interface, where the viscous drag is small, that the fiber's velocity is 1 cm s-1.

Biosensing Techniques↗
PubMed2005

Detection of glucose at 2 fM concentration.

We report the amperometric detection of glucose at 2 fM concentration in a physiological buffer solution at 1 atm O2 pressure. The sensitive assay is based on the close to absolute electroreductive stripping of O2 from the solution near the glucose electrooxidizing anode. The glucose was detected by its electrooxidation on a stationary glassy carbon disk surrounded by an also stationary platinum ring. The disk was coated with a film of glucose oxidase (GOx), electrically "wired" with PVP-[Os(N,N'-dimethyl-2,2'-biimidazole)3]2+/3+ (polymer I), having a redox potential of -0.19 V versus Ag/AgCl. The ring was coated with bilirubin oxidase (BOD) "wired" with PAA-PVI-[Os(4,4'-dichloro-2,2'-bipyridine)2Cl]+/2+ (polymer II), having a redox potential of + 0.36 V versus Ag/AgCl. The ring-disk electrode was held facing up, and a 30-microL drop was placed on it for the assay, with the ring poised at -0.3 V/ AgAgCl and the disk poised at -0.1 V/ Ag/AgCl. Even though the atmosphere over the drop was O2 at 1 atm pressure, the wired BOD disk scavenged the O2 so effectively that the glucose-reduced FADH2 of GOx was not oxidized by O2, the natural cosubstrate of the enzyme.

Electrochemistry↗
PubMed2004

A four-electron O(2)-electroreduction biocatalyst superior to platinum and a biofuel cell operating at 0.88 V.

O2 was electroreduced to water, at a true-surface-area-based current density of 0.5 mA cm-2, at 37 degrees C and at pH 5 on a "wired" laccase bioelectrocatalyst-coated carbon fiber cathode. The polarization (potential vs the reversible potential of the O2 /H2O half-cell in the same electrolyte) of the cathode was only -0.07 V, approximately one-fifth of the -0.37 V polarization of a smooth platinum fiber cathode, operating in its optimal electrolyte, 0.5 M H2SO4. The bioelectrocatalyst was formed by "wiring" laccase to carbon through an electron conducting redox hydrogel, its redox functions tethered through long and flexible spacers to its cross-linked and hydrated polymer. Incorporation of the tethers increased the apparent electron diffusion coefficient 100-fold to (7.6 +/- 0.3) x 10-7 cm 2 s-1. A miniature single-compartment glucose-O2 biofuel cell made with the novel cathode operated optimally at 0.88 V, the highest operating voltage for a compartmentless miniature fuel cell.

Journal Article↗
PubMed2004

Modulating the redox properties of an osmium-containing metallopolymer through the supporting electrolyte and cross-linking.

Thin films of the perchlorate salt of an [Os(N,N'-alkylated-2,2'-biimidazole3)2+/3+-containing polymer have been formed on planar platinum microelectrodes. The electrochemical response associated with the Os2+/3+ couple occurs at -0.19 V. In aqueous perchlorate media at near-neutral pH the voltammetric response is close to that expected for an electrochemically reversible reaction involving a surface-confined reactant. Chronoamperometry conducted on a microsecond time scale indicates that the film and solution resistances are comparable for low concentrations of supporting electrolyte. However, for LiClO4 concentrations greater than 0.4 M, RFilm contributes less than 25% of the overall cell resistance. These results suggest that when the film is dehydrated and the density of redox centers is increased, electron or hole hopping dominates the rate of homogeneous charge transport through the film. The rate of homogeneous charge transport, characterized by D(CT)1/2Ceff, where DCT is the homogeneous charge transport diffusion coefficient and Ceff is the effective concentration of osmium centers within the film, depends weakly on the concentration of LiClO4 as supporting electrolyte decreasing from (8.1 +/- 0.16) x 10(-9) to (4.7 +/- 0.4) x 10(-9) mol cm(-2) s(-1/2) as the perchlorate concentration increases from 0.1 to 1.0 M. These values are about 2 orders of magnitude lower than those of the chemically cross-linked chloride salt of the polymer. The rate of heterogeneous electron transfer is unusually rapid in this system and increases from (5.2 +/- 0.4) x 10(-3) to (7.8 +/- 0.4) x 10(-3) cm s(-1) on going from 0.1 to 0.4 M LiClO4 before becoming independent of the supporting electrolyte concentration at (9.2 +/- 0.6) x 10(-3) cm s(-1) for [LiClO4] > or = 0.6 M.

Journal Article↗
PubMed2003

Oxygen is electroreduced to water on a "wired" enzyme electrode at a lesser overpotential than on platinum.

The first enzyme-based catalyst that is superior to platinum in the four-electron electroreduction of oxygen to water is reported. The smooth Pt cathode reached half and 90% of the mass transport-limited current density at respective overpotentials of -0.4 and -0.58 V in 0.5 M sulfuric acid, and only at even higher overpotentials in pH 7.2 phosphate buffer. In contrast, the smooth "wired" bilirubin oxidase cathode reached half and 90% of the mass transport-limited current density at respective overpotentials as low as -0.2 and -0.25 V. The mass transport-limited current density for the smooth "wired" enzyme cathode in PBS was twice that with smooth Pt in 0.5 M sulfuric acid. Under 1 atm O2 pressure, O2 was electroreduced to water on a polished carbon cathode, coated with the "wired" BOD film, in pH 7.2 saline buffer (PBS) at an overpotential of -0.31 V at a current density of 9.5 mA cm-2. At the same overpotential, the current density of the polished platinum cathode in 0.5 M H2SO4 was 16-fold lower, only 0.6 mA cm-2.

Basidiomycota↗
PubMed2003

Characteristics of a miniature compartment-less glucose-O2 biofuel cell and its operation in a living plant.

We report the temperature, pH, glucose concentration, NaCl concentration, and operating atmosphere dependence of the power output of a compartment-less miniature glucose-O(2) biofuel cell, comprised only of two bioelectrocatalyst-coated carbon fibers, each of 7 micro m diameter and 2 cm length (Mano, N.; Mao, F.; Heller, A. J. Am. Chem. Soc. 2002, 124, 12962). The bioelectrocatalyst of the anode consists of glucose oxidase from Aspergillus niger electrically "wired" by polymer I, having a redox potential of -0.19 V vs Ag/AgCl. That of the cathode consists of bilirubin oxidase from Trachyderma tsunodae "wired" by polymer II having a redox potential of +0.36 V vs Ag/AgCl (Mano, N.; Kim, H.-H.; Zhang, Y.; Heller, A. J. Am. Chem. Soc. 2002, 124, 6480. Mano, N.; Kim, H.-H.; Heller, A. J. Phys. Chem. B 2002, 106, 8842). Implantation of the fibers in the grape leads to an operating biofuel cell producing 2.4 micro W at 0.52 V.

Bioelectric Energy Sources↗
PubMed2003

Long tethers binding redox centers to polymer backbones enhance electron transport in enzyme "Wiring" hydrogels.

A redox hydrogel with an apparent electron diffusion coefficient (D(app)) of (5.8 +/- 0.5) x 10(-)(6) cm(2) s(-)(1) is described. The order of magnitude increase in D(app) relative to previously studied redox hydrogels results from the tethering of redox centers to the backbone of the cross-linked redox polymer backbone through 13 atom spacer arms. The long and flexible tethers allow the redox centers to sweep electrons from large-volume elements and to collect electrons of glucose oxidase efficiently. The spacer arms make the collection of electrons from glucose oxidase so efficient that glucose is electrooxidized already at -0.36 V versus Ag/AgCl, the reversible potential of the redox potential of the FAD/FADH(2) centers of the enzyme at pH 7.2. The limiting current density of 1.15 mA cm(-)(2) is reached at a potential as low as -0.1 V versus Ag/AgCl. The novel redox center of the polymer is a tris-dialkylated N,N'-biimidazole Os(2+/3+) complex. Its redox potential, -0.195 V versus Ag/AgCl, is 0.8 V reducing relative to that of Os(bpy)(2+/3+), its 2,2'-bipyridine analogue.

2,2'-Dipyridyl↗
PubMed2002

A miniature biofuel cell operating in a physiological buffer.

A glucose-O2 biofuel cell, consisting only of two electrocatalyst coated 7-mum diameter, 2-cm long carbon fibers is reported. The cell operated continuously at 0.52 V at 37 degrees C in a physiological buffer solution for a week, producing 1.9 muW during the first and 1.0 muW during the last day, generating in the period 0.9 J of electrical energy while passing a charge of 1.7 C. If a similar dimension zinc fiber were utilized in a battery at 100% current efficiency, only 0.016 C would have been generated.

Bioelectric Energy Sources↗
PubMed2002

Simple enzyme-amplified amperometric detection of a 38-base oligonucleotide at 20 pmol L(-1) concentration in a 30- microL droplet.

A 38-base DNA sequence has been detected at 20 pmol L(-1) concentration in 15-35- microL droplets by means of an electrochemical enzyme-amplified sandwich-type assay on a mass-manufacturable screen-printed carbon electrode. Formation of the sandwich brought the horseradish peroxidase-label of the detection sequence into electrical contact with a pre-electrodeposited redox polymer, making the sandwich an electrocatalyst for the reduction of hydrogen peroxide to water at +0.2 V (Ag/AgCl). Sensitivity twenty times better than that of a related system resulted from: 1. fivefold reduction of the noise by substituting the formerly used poly( N-vinyl imidazole)-co-acrylamide comprising redox co-polymer with poly(4-vinyl pyridine)-co-acrylamide comprising redox polymer, enabling use of the electrodes at a more oxidizing potential at which noise (the rate of non-enzyme catalyzed electroreduction currents of dissolved oxygen and hydrogen peroxide) was lower; 2. doubling of the catalytic electroreduction current upon electrodeposition of a second layer of the redox polymer on the capture sequence-containing film; and 3. doubling of the current by increasing the coverage by the capture sequence.

Base Sequence↗
PubMed2002

An oxygen cathode operating in a physiological solution.

We report the electroreduction of O(2) to water under physiological conditions (pH 7.4, 0.15 M NaCl, 37.5 degrees C) at a current density of 5 mA cm(-2) and at a potential only 0.18 V reducing versus that of the reversible O(2)/H(2)O electrode at pH 7.4. The immobilized electrocatalyst enabling the reduction is the electrostatic adduct of bilirubin oxidase from Myrothecium verrucaria, a polyanion at pH >4.1, and the polycationic redox copolymer of polyacrylamide and poly (N-vinylimidazole) complexed with [Os (4,4'-dichloro-2,2'-bipyridine)(2)Cl](+/2+), cross-linked on carbon cloth. The current density of the rotating electrodes was O(2) transport limited up to 8.8 mA cm(-2); their kinetic limit was reached at 9.1 mA cm(-2). The operational life of the electrodes depended on their angular velocity, which defined not only the current density but also the mechanical shear stress stripping the electrocatalyst. When the electrodes were rotated at 300 rpm and were poised at -256 mV versus the potential of the reversible O(2)/H(2)O electrode, their 2.4 mA cm(-2) initial current density decreased to 1.3 mA cm(-2) after 6 days of continuous operation at 37.5 degrees C.

Animals↗