Search PubMed⌕ Search

Biomedical subjects

Naoki Sugimoto

Publications and source records attributed to Naoki Sugimoto.

At least 55 records · Page 3Linked to original sources

Determination of benzoyl peroxide and benzoic acid in wheat flour by high-performance liquid chromatography and its identification by high-performance liquid chromatography-mass spectrometry.

An HPLC method on C18 column using a gradient mobile phase is proposed for the separate determination of residual benzoyl peroxide (BP) and benzoic acid (BA) in flour and wheat products. The recoveries obtained were quite excellent, from 96.0 to 99.3% for BP added to the flour, and 91.3% for BA added to the flour. Analysis of 10 samples of commercial foods such as flour and wheat products, detected 0.7 microg/g of BP in imported noodles. Furthermore, we successfully verified the existence of BP by LC-MS. These methods are simple and reliable for determination and verifying the amount of BP and BA in foods since now the use of BP as a food additive is permitted in many countries.

Benzoic Acid↗

Synthetic cinchonidine receptors obtained by cross-linking linear poly(methacrylic acid) derivatives as an alternative molecular imprinting technique.

A molecular imprinting approach to construct synthetic receptors was examined, wherein a linear pre-polymer bearing functional groups for intermolecular interaction with a given molecule is cross-linked in the presence of the molecule as a template, and subsequent removal of the template from the resultant network-polymer is expected to leave a complementary binding site. Poly(methacrylic acid) (PMAA) derivatized with a vinylbenzyl group as a cross-linkable side chain was utilized as the pre-polymer for the molecular imprinting of a model template, (-)-cinchonidine. Selectivity of the imprinted polymer was evaluated by comparing the retentions of the original template, (-)-cinchonidine and its antipode (+)-cinchonine in chromatographic tests, exhibiting a selectivity factor up to 2.4. By assessment of the imprinted polymers in a batch mode, a dissociation constant at 20 degrees C for (-)-cinchonidine was estimated to be K (d) = 2.35 x 10(-6) M (the number of binding sites: 4.54 x 10(-6) mol/g-dry polymer). The displayed affinity and selectivity appeared comparable to those of an imprinted polymer prepared by a conventional monomer-based protocol, thus showing that the pre-polymer, which can be densely cross-linked, is an alternative imprinter for developing template-selective materials. (-)-Cinchonidine-imprinted polymers were prepared and assessed using the pre-polymers bearing different densities of the vinylbenzyl group and different amounts of the cross-linking agent to examine the appropriate density of the cross-linking side chain that was crucial for developing the high affinity and selectivity of the imprinted polymers.

Cinchona Alkaloids↗

Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material.

A molecularly imprinted polymer with immobilized Au nanoparticles (Au-MIP) is reported as a novel type of sensing material. The sensing mechanism is based upon the variable proximity of the Au nanoparticles immobilized in the imprinted polymer, which exhibits selective binding of a given analyte accompanied by swelling that causes a blue-shift in the plasmon absorption band of the immobilized Au nanoparticles. Using adrenaline as the model analyte, it was shown that molecular imprinting effectively enhanced the sensitivity and selectivity, and accordingly, Au-MIP selectively detects the analyte at 5 microM. The combination of molecular imprinting and the Au nanoparticle-based sensing system was shown to be a general strategy for constructing sensing materials in a tailor-made fashion due to wide applicability of the imprinting technique and the independence of the sensing mechanism from the analyte recognition system.

Chemistry Techniques, Analytical↗

Influences of ribonucleotide on a duplex conformation and its thermal stability: study with the chimeric RNA-DNA strands.

To understand the influences of the ribonucleotide on a duplex conformation and its stability, we systematically studied the CD spectra and the thermodynamics of nucleic acid duplexes formed by the chimeric RNA-DNA strand in which ribonucleotides and deoxyribonucleotides were covalently attached. It was found that the duplex stability was context-dependent and independent of the number of ribonucleotides in the chimeric strand, whereas the CD spectra showed less overall structural perturbation by the chimeric junctions. Combining the results of the CD and the thermodynamic data revealed a stability-structure relationship for the duplexes. Importantly, DeltaG(o)37 values estimated for the chimeric junction formation in the RNA-DNA/DNA and the RNA-DNA/RNA duplexes were close to those of RNA/DNA and RNA/RNA interactions, respectively. Furthermore, DeltaG(o)37s of the DNA-RNA/DNA and DNA-RNA/DNA-RNA junctions were similar to those of the DNA duplex, and the values of DNA-RNA/RNA-DNA were similar to those of the DNA/RNA. The thermodynamic analyses suggest that the 5'-nucleotide may be the crucial factor that determines the stability at the chimeric junction. Our results not only suggest influences of the ribonucleotide on a duplex conformation and its stability but also are useful for the design of RNA-DNA chimeric strands applicable to biotechnology.

Base Pairing↗

Duplex dissociation of telomere DNAs induced by molecular crowding.

Because of the importance of telomere DNAs, the structures of these DNAs in vivo are currently of great research interest in the medical, pharmaceutical, chemical, and industrial fields. To understand the structure of biomolecules in vivo, their properties studied in vitro are extrapolated to the in vivo condition, while the condition in a living cell is inherently molecularly crowded and a nonideal solution contains various biomolecules. We investigated the effect of molecular crowding, which is one of the most important cellular environmental conditions, on the structure and stability of the telomere and G-rich and C-rich DNAs using circular dichroism (CD) spectra, CD melting curves, and isothermal titration calorimetry (ITC). The CD spectra and CD melting curves of G-rich DNA, C-rich DNA, and the 1:1 mixture of G-rich and C-rich DNAs showed that each G-rich DNA, C-rich DNA, and the 1:1 mixture form the antiparallel G-quadruplex, I-motif, and duplex, respectively, in the noncrowding condition as previously considered. On the contrary, the G-rich and C-rich DNAs individually form the parallel G-quadruplex and I-motif, respectively, in the molecular crowding condition, and the 1:1 mixture folds into the parallel G-quadruplex and I-motif but does not form a duplex. The ITC measurements indicated that the thermodynamic stability (DeltaG degrees (20)) of the duplex formation between the G-rich and C-rich DNAs in the noncrowding condition was -10.2 kcal mol(-)(1), while only a small heat change was observed in the ITC measurements in the molecular crowding condition. These ITC results also demonstrated that the molecular crowding condition prevents any duplex formation between G-rich and C-rich DNAs. These results indicate that a structural polymorphism of the telomere DNAs is induced by molecular crowding in vivo.

Calorimetry↗

Mechanical force analysis of peptide interactions using atomic force microscopy.

Some peptides have previously been reported to bind low molecular weight chemicals. One such peptide with the amino acid sequence His-Ala-Ser-Tyr-Ser was selectively screened from a phage library and bound to a cationic porphyrin, 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)-21H,23H-porphine (TMpyP), with a binding constant of 10(5) M(-1) (J. Kawakami, T. Kitano, and N. Sugimoto, Chemical Communications, 1999, pp. 1765-1766). The proposed binding was due to pi-electron stacking from two aromatic amino acids of histidine and tyrosine. In this study, the weak interactions between TMpyP and the peptide were further investigated by force curve analysis using atomic force microscopy (AFM). The mechanical force required to unbind the peptide-porphyrin complex was measured by vertical movement of the AFM tip. Peptide self-assembled monolayers were formed on both a gold-coated mica substrate and a gold-coated AFM tip. The TMpyPs could bind between the two peptide layers when the peptide-immobilized AFM tip contacted the peptide-immobilized substrate in solution containing TMpyP. In the retracting process a force that ruptured the interaction between TMpyPs and peptides was observed. The unbinding force values correlated to the concentration of TMpyP. A detection limit of 100 ng/mL porphyrin was obtained for the force measurement, and was similar to surface plasmon resonance sensor detection limits. Furthermore, we calculated the product of the observed force and the length of the molecular elongation to determine the work required to unbind the complexes. The obtained values of unbinding work were in a reasonable range compared to the binding energy of porphyrin-peptide.

Biomechanical Phenomena↗

Stabilization of a DNA duplex under molecular crowding conditions of PEG.

A living cell generally contains macromolecules occupying 20-40% of the total volume. To mimic the crowded cellular condition, we prepared solutions including poly(ethylene glycol) (PEG) as a cosolute and investigated the influence of the cosolute on the DNA duplex stability. In the presence of PEG 200 or PEG 8000, the Tm (melting temperature) of a self-complementary duplex of 5'-dATGCGCAT-3' decreased by 11.8 degrees C in the presence of 20 wt% PEG200 and by 1.5 degrees C in the presence of 20 wt% PEG 8000. The dln K(obs) vs. dln a(w) plots for PEG 200 and PEG 8000 were linear with a negative slope, suggesting the association of water molecules upon the duplex formation. Interestingly, when the NaCl concentration decreased from 1 M to 400 mM, the Tm increased in the presence of PEGs. Our results imply that the nucleic acid stabilities in a living cell may be different from those in in vitro conditions.

Base Pairing↗

Secondary structure change of oligonucleotide induced by salts.

Formation of a unimolecular structure is essential for many biological processes such as transcription and translation, and the (deoxy)ribozyme activities. Since such nucleic acids consist of self-complementary sequence, they also have a potential to form a bimolecular structure as well. In this study, we designed 13 RNA and DNA sequences which can potentially form a hairpin loop structure by one strand and a duplex by two strands. On the basis of the UV melting and CD spectra measurements, we found that an RNA oligomer of rGCAAGCAAGCUUGC adopted different secondary structures depending on NaCl concentration, for example, a duplex at 1 M NaCl and a hairpin loop structure at 10 mM NaCl. On the other hand, the structure of DNA oligomer with the same sequence was unchanged. This observation indicates that the structural transition by the change of the NaCl concentration is not due to the nature of the sequence.

Buffers↗

Analysis of the secondary structure of a ribozyme that requires His as a cofactor.

A novel ribozyme that requires L-histidine for expression of the function was revealed from an in vitro selection experiment. Here, we report the secondary structural analysis of the ribozyme. Several deletion and point mutants were designed based on the possible secondary structures predicted by a thermodynamic method with nearest neighbor parameters. As a result, formation of two important stems was essential for folding into the active structure.

Coenzymes↗

Conformational change of a nucleotide by a base-pair mimic nucleoside in the complementary DNA strand.

On the basis of the non-covalent bond interactions in nucleic acids, we have synthesized a novel adenosine derivative tethering a phenyl group. Structure and thermal stability of the DNA duplexes bearing the adenosine derivative in the middle of a strand were investigated by CD spectra and the UV melting curves. We found that the conformation and the interactions of the duplexes were similar regardless of the nucleotide facing with the adenosine derivative in a duplex. This observation suggests the base pair-mimic geometry of the adenosine derivative accompanied with a conformational change of the nucleotide in the complementary strand.

Adenosine↗

Production of unnatural glucosides of curcumin with drastically enhanced water solubility by cell suspension cultures of Catharanthus roseus.

Catharanthus roseus cell suspension cultures converted exogenously supplied curcumin to a series of glucosides, none of which has been found in nature so far. The efficiency of glucosylation was dependent on culture stage of the cells and medium sucrose concentration. Methyl jasmonate and salicylic acid enhanced the glucoside formation only when they were added to the cultures prior to the addition of curcumin. The glucoside yield was 2.5 micromol/g fresh weight of the cells at an optimal culture condition. The water solubility of curcumin-4',4"-O-beta-D-digentiobioside was 0.65 mmol/ml, which was 20 million-fold higher than that of curcumin.

Acetates↗

Structural competition involving G-quadruplex DNA and its complement.

Structural competition between the G-quadruplex, the I-motif, and the Watson-Crick duplex has been implicated for repetitive DNA sequences, but the competitive mechanism of these multistranded structures still needs to be elucidated. We investigated the effects of sequence context, cation species, and pH on duplex formation by the G-quadruplex of dG(3)(T(2)AG(3))(3) and its complement the I-motif of d(C(3)TA(2))(3)C(3), using ITC, DSC, PAGE, CD, UV, and CD stopped-flow kinetic techniques. ITC and PAGE experiments confirmed Watson-Crick duplex formation by the complementary strands. The binding constant of the two DNA strands in the presence of 10 mM Mg(2+) at pH 7.0 was shown to be 5.28 x 10(7) M(-1) at 20 degrees C, about 400 times larger than that in the presence of 100 mM Na(+) at pH 5.5. The dynamic transition traces of the duplex formation from the equimolar mixture of G-/C-rich complementary sequences were obtained at both pH 7.0 and pH 5.5. Fitting to a single-exponential function gave an observed rate of 8.06 x 10(-3) s(-1) at 20 degrees C in 10 mM Mg(2+) buffer at pH 7.0, which was about 10 times the observed rate at pH 5.5 under the same conditions. Both of the observed rates increased as temperature rose, implying that the dissociation of the single-stranded structured DNAs is the rate-limiting step for the WC duplex formation. The difference between the apparent activation energy at pH 7.0 and that at pH 5.5 reflects the fact that pH significantly influences the structural competition between the G-quadruplex, the I-motif, and the Watson-Crick duplex, which also implies a possible biological role for I-motifs in biological regulation.

Animals↗

An oligopeptide containing the C-terminal sequence of RNase a has a potent RNase a binding property.

We demonstrate that an oligopeptide containing the C-terminal sequence of RNase A binds to RNase A in a stoichiometric and site-specific manner. Our observations are consistent with the interaction found in the major domain-swapped RNase A dimer, so that the peptide binding may be promoted through the swapping with the C-terminal beta-sheet of RNase A. Because the design of a protein-binding peptide is much simpler than other methods such as the combinatorial method, we propose that investigation using an oligopeptide may be of general application to domain swapping in proteins as well as for the development of an oligopeptide tool that specifically binds to a target protein.

Amino Acid Sequence↗

Factors that contribute to efficient catalytic activity of a small Ca2+-dependent deoxyribozyme in relation to its RNA cleavage function.

Recently, we found a small Ca(2+)-dependent deoxyribozyme (unmodified), d(GCCTGGCAG(1)G(2)C(3)T(4)A(5)C(6)A(7)A(8)C(9)G(10)A(11)GTCCCT), with cleavage activity for its RNA substrate, r(AGGGACA downward arrow UGCCAGGC) ( downward arrow denotes the RNA cleavage site), in the presence of Ca(2+) and developed a functional SPR sensor chip with this deoxyribozyme [Okumoto, Y., Ohmichi, T., and Sugimoto, N. (2002) Biochemistry 41, 2769-2773]. In the study presented here, to clarify the factors contributing to the efficient catalytic activity of the unmodified deoxyribozyme, RNA cleavage reactions were carried out using 24 mutant deoxyribozymes containing one unnatural DNA nucleotide, such as dI (2'-deoxyinosine), 7-deaza-dG, 2-aminopurine, 7-deaza-dA, 2-amino-dA, dm(5)C (5-methyl-2'-deoxycytosine), or d(P)C (5-propynyl-2'-deoxycytosine). The K(m) values (Michaelis constants) with the mutants that lacked N7 and O6 of G(1) and O6 of G(2) were 4.5 and 6.6 times that of the unmodified one, respectively. The k(cat) value (cleavage rate constant) with the mutants that lacked O6 of G(10) was 0.025 times that of the unmodified one. The results of UV melting curves, SPR kinetics, and CD spectra supported the quantitative idea that the catalytic activity of the unmodified form was achieved using Ca(2+). On the basis of these results, a preliminary model for two G(1) x A(8) and G(2) x A(7) mismatched base pairs such as G(anti) x A(anti) formed in the catalytic loop is proposed. The factor of 10 increase in the k(cat)/K(m) value of the mutant deoxyribozyme, which has C(9) substituted with d(P)C, suggests that the base stacking interaction between the substituted propynyl group in dC and the nearest-neighbor base grew stronger. Thus, substituting d(P)C for dC in the catalytic loop would be one of the best ways to increase the catalytic activity of the deoxyribozyme.

Base Pair Mismatch↗

Structural transition from antiparallel to parallel G-quadruplex of d(G4T4G4) induced by Ca2+.

Guanine quadruplex (G-quadruplex) structures are formed by guanine-rich oligonucleotides. Because of their in vivo and in vitro importance, numerous studies have been demonstrated that the structure and stability of the G-quadruplex are dependent on the sequence of oligonucleotide and environmental conditions such as existing cations. Previously, we quantitatively investigated the divalent cation effects on the antiparallel G-quadruplex of d(G4T4G4), and found that Ca2+ induces a structural transition from the antiparallel to parallel G-quadruplex, and finally G-wire formation. In the present study, we report in detail the kinetic and thermodynamic analyses of the structural transition induced by Ca2+ using stopped-flow apparatus, circular dichroism, size-exclusion chromatography (SEC) and atomic force microscopy. The quantitative parameters showed that at least two Ca2+ ions were required for the transition. The kinetic parameters also indicated that d(G4T4G4) underwent the transition through multiple steps involving the Ca2+ binding, isomerization and oligomerization of d(G4T4G4). The parallel-stranded G-wire structure of d(G4T4G4), which is a well controlled alignment of numerous DNA strands with G-quartets, as the final product induced by Ca2+, was observed using SEC and atomic force microscopy. These results provide insight into the mechanism of the structural transition and G-wire formation and are useful for constructing a nanomaterial regulated by Ca2+.

Base Sequence↗

Structural polymorphism of telomeric DNA regulated by pH and divalent cation.

DNA oligonucleotides can form multi-stranded structures such as a duplex, triplex, and quadruplex, while the double helical structure is generally considered as the canonical structure of DNA oligonucleotides. Guanine-rich or cytosine-rich oligonucleotides, which are observed in telomere, centromere, and other biologically important sequences in vivo, can form four-stranded G-quadruplex and I-motif structures in vitro. In this study, we have investigated the effects of pH and cation on the structures and their stabilities of d(G4T4G4) and d(C4A4C4). The CD spectra and thermal melting curves of DNAs at various pHs demonstrated that acidic conditions induced a stable I-motif structure of d(C4A4C4), while the pH value did not affect the G-quadruplex structure and stability of d(G4T4G4). The CD spectra of the 1:1 mixture of d(G4T4G4) and d(C4A4C4) indicated that the acidic conditions inhibit the duplex formation between d(G4T4G4) and d(C4A4C4). Isothermal titration calorimetry measurements of the duplex formation at various pHs also quantitatively indicated that the acidic conditions inhibit the duplex formation. On the other hand, the CD spectra and thermal melting curves of DNAs in the absence and presence of Ca2+ indicated that Ca2+ induces a parallel G-quadruplex structure of d(G4T4G4) and then inhibits the duplex formation. These results lead to the conclusion that both the pH and coexisting cation can induce and regulate the structural polymorphisms the oligonucleotides in which they form the G-quadruplex, I-motif, and duplex depending on the conditions. Thus, the results reported here indicate pivotal roles of pH and coexisting cations in biological processes by regulating the conformational switching between the duplex and quadruplexes structures of the guanine-rich or cytosine-rich oligonucleotides in vivo.

Cations, Divalent↗

Beyond the Watson-Crick double helix: design of functional nucleic acids in silico, in tube, and in cell.

The structures and thermodynamic properties of non-Watson-Crick structures in RNA and DNA are described. The recent data on dangling ends in RNA, peptide nucleic acid (PNA), triplex, and G-quadruplex have resulted in an understanding of the catalysis, tertiary contact domains, and biological functions associated with these unpaired regions and special helices, and are useful in developing functional nucleic acids in cell.

Base Pairing↗