Search PubMed⌕ Search

Biomedical subjects

N Uchida

Publications and source records attributed to N Uchida.

At least 271 records · Page 15Linked to original sources
PubMed1977

Encephalomyelitis induced by canine distemper virus in non-human primates.

A strain of canine distemper virus was shown to be highly neuro-virulent in non-human primates. Intracerebral inoculation induced in monkeys histological lesions of encephalomyelitis, i.e., degenerative changes consisting mainly of neuronal damage and inflammatory changes such as perivascular cuffings and glial proliferation, in wide areas in the brain and spinal cord. In one monkey observed for 70 days, lesions with a tendency of subacute sclerosing were also noticed. Immunosuppression with cyclophosphamide or antithymocyte serum was found to aggravate the clinical course and to modify the histological lesions in the central nervous system as well as the level of antibody response to the virus in cerebrospinal fluid. Possible application of distemper encephalomyelitis in monkeys as a primate model for analysis of the immune mechanism involved in paramyxovirus-induced encephalomyelitis was discussed.

Animals↗
PubMed1976

Growth of measles virus in nervous tissues. IV. Neurovirulence of wild measles and SSPE viruses in monkeys.

Neurovirulence of in vivo-passed wild measles virus and that of the cell-associated SSPE virus were compared by intracerebral inoculation into monkeys. The wild measles virus was found to lack neutrovirulence without producing neurological signs or significant histological changes in the brains, whereas the virus was confirmed to preserve the properties characteristic of the wild virus. In contrast, inoculation of the SSPE virus induced rapid onset of neurological signs with mild but definite histological changes including degeneration of nerve cells. The fact that SSPE virus exhibited neurovirulence in monkeys indicated importance of the current assay system for neurovirulence of measles vaccine by intracerebral inoculation into monkeys.

Animals↗
PubMedDate not supplied

Clinical and experimental observation of glistening in acrylic intraocular lenses.

PURPOSE: To determine whether or not glistening particles in implanted acrylic intraocular lenses (IOL) increase with the passage of time. METHODS: Prospective clinical study: Glistenings were evaluated in 31 patients (49 eyes) with implanted acrylic IOL, the emphasis being on when glistening first became evident and subsequent changes in the number of glistening particles. EXPERIMENT: IOLs were monitored for any changes that occurred with the passage of time as they were immersed first in a 50 degrees C saline solution and then in another saline solution with a temperature of 35 degrees C. RESULTS: Prospective clinical study: Glistening phenomenon was observed in 28 IOLs (57%) 2 to 16 months after implantation (mean = 6.6 months). Glistenings reached their peak in number within a few months of formation in all cases, showing no further increase thereafter. EXPERIMENT: Glistening particles first appeared on the 10th day of the experiment in sizes ranging from 3 to 10 microm in diameter. They remained at the same level for the next 60 days without showing any increase. CONCLUSIONS: Glistening formation in acrylic IOLs was found to stabilize within a few months after appearance. The method of our experiment proved reliable in producing, in a relatively short period of time, glistening similar to that found in patients.

Acrylic Resins↗
PubMedDate not supplied

Improved reliability of repetitive RF interstitial heating in combination with brachytherapy: the effective use of water.

Interstitial heating and brachytherapy are often combined in the treatment of cancer. In such instances, a needle-type internal electrode is inserted into the RALS (remotely controlled afterloading system) catheter instead of a radioactive source. A problem with this approach, however, is that the temperature distribution pattern generated by the inserted electrode varies at any given target region in each heating treatment, which makes it difficult to accurately replicate the heating treatment protocol. This variation is suspected to be caused by non-uniformity in the small gap between the internal electrode and the inner surface of the surrounding catheter, causing electric currents to flow between the electrode and the heating material, which differs from procedure to procedure. To solve this problem, the gap was filled with water of high permittivity, and the temperature distribution was investigated using phantoms. With this method, a stable and reproducible temperature rise distribution was obtained in the phantom experiment.

Brachytherapy↗
PubMedDate not supplied

A biolized implantable ventricular assist device compatible with IABP console.

A low pressure pneumatic pusher plate blood pump was developed for temporary right, left, or biventricular assist. Important features of this pump are its 1) driveability by the standard, easily available intraaortic balloon pump (IABP) console; 2) gelatin coated internal surface for blood compatibility; 3) essentially flat disc shape, 3 cm thick and 11 cm in diameter, for optimal anatomic fit; and 4) unique pusher plate guide mechanism to ensure linear motion without deflections of the diaphragm, and consequent uniform flow distribution into the pump. The guide telescopes into itself to avoid a housing protrusion for easy implantability; this controlled movement also provides a number of performance, control, and diagnostic benefits. The pump's 60 ml displacement gives up to 4.7 L/min at 80 bpm and 6.7 L/min at 120 bpm outputs in a mock loop. This VAD has been implanted in two calves for 43 to 84 days, continuously driven by a Datascope IABP console. An average 5 L/min pump output has been observed in both synchronous and fixed rate modes. No anticoagulation was required. We expect extensive clinical use of this VAD, based on its reliability, low cost, and simplicity.

Animals↗
PubMedDate not supplied

Compliance effect on patency of small diameter vascular grafts.

The compliance mismatch hypothesis as a cause of failure of small diameter grafts was investigated using 4 mm internal diameter, 5 cm long Biolized polyurethane grafts. The luminal surface of 0.5 mm thick Biomer sponge grafts was covered with 100 microns of crosslinked gelatin. Compliance matched, and noncompliant grafts had in vivo compliance values of 13.5 +/- 2.89 and 1.0 +/- 0.7 X 10(-2%) per mmHg, respectively. In vivo compliance defined as 2 X dD/dP X 1/Do was measured in situ using the ultrasonic Hokanson probe. Compliance values of compliant grafts equaled that of the canine carotid artery at 100 mmHg mean arterial pressure. Grafts were implanted using an end-to-end anastomosis in 14 dogs for 6 wk. Patency rates for compliant vs. noncompliant grafts were 64% (9/14) and 50% (7/14). Compliance values for compliant grafts decreased to a mean of 7.14 X 10(-2%) per mmHg. Anastomotic intimal hyperplasia at the proximal and distal ends of compliant and noncompliant grafts measured 239.9 +/- 128, 197 +/- 129 microns, 338.9 +/- 273.6, and 304.3 +/- 179.3 microns, respectively. There were no significant differences in localized anastomotic intimal hyperplasia at either graft end for either graft type. This study did not show any positive effects of graft compliance.

Anastomosis, Surgical↗
PubMedDate not supplied

Development of inductive heating equipment using an inductive aperture-type applicator.

We designed an inductive aperture-type applicator, IATA, consisting of a one-turn, square, column-like coil made of a metal strip. In experiments using a phantom, this applicator was seen to have the following characteristics: (1) it does not excessively heat the fat layer; (2) deep portions can be heated effectively; (3) heat can be applied to the subject, without contact with the applicator; (4) excessive generation of heat does not occur in parts of tissue near the edge of the aperture; (5) size of the aperture can be changed for adaptation to size of the site to be heated; (6) the aperture can be modified to fit the shape of the subject and the depth of penetration is influenced by size of the subject being heated; (7) the applicator can be driven at an arbitrary frequency; (8) efficiency of heat generation to the input power is low. The inductive heating equipment, 'Inductron', which we have developed possesses the necessary requirements for adequate clinical application.

Adipose Tissue↗