Biomedical subjects

N S Xu

Publications and source records attributed to N S Xu.

21 records · Page 2Linked to original sources

PubMedDate not supplied

A cold cathode lighting element prototype.

In this study, we present a prototype of lighting element in which a carbon-containing field emission material is used as the cathode. The operating characteristics, i.e. current-voltage characteristics, current stability, luminance and lifetime of the lighting element are tested. By applying high-voltage phosphor, a maximum brightness of 10000cd/m(2) has been recorded and a lighting element under lifetime test has been operating in DC driving mode for over 2500h without decay in emission current and brightness. These results imply that the prototype lighting element is suitable for commercial application.

Journal Article↗

PubMedDate not supplied

Effect of carbon nanotube structural parameters on field emission properties.

Experimental studies were devoted to the effect of structural parameters, i.e., tube diameter and density, on the field electron emission characteristics of carbon nanotubes. Thermal chemical vapor deposition system was employed to synthesize carbon nanotubes. Nanotubes with different diameters and densities were obtained by adjusting the thickness of the iron (Fe) catalyst film. The morphologies of the Fe and carbon nanotube film were characterized by scanning electron microscopy respectively. Further field emission measurement confirmed that the tube diameter and density could significantly affect the electron emission properties of the carbon nanotube. Possible physical reasons for the effect are discussed.

Journal Article↗

PubMedDate not supplied

The application of carbon nanotubes in high-efficiency low power consumption field-emission luminescent tube.

In this report, details are given of our recent experimental study of using carbon nanotubes (CNTs) as cathode of the luminescent tubes. The CNT film is synthesized by thermal chemical vapor deposition. Two kinds of luminescent tubes that have different gaps have been fabricated. The luminescent tube with 0.1mm gap has a low threshold voltage of about 780V and high emission current of 300 microA when the gate voltage is 970V. The DC power consumption of the luminescent tube with a 0.1mm gap is approximately 1.12W. The results show that the CNTs are very good emission sources and suitable for application in the luminescent tube.

Journal Article↗