Search PubMed⌕ Search

Biomedical subjects

N D Grindley

Publications and source records attributed to N D Grindley.

At least 37 records · Page 2Linked to original sources

A functional analysis of the inverted repeat of the gamma delta transposable element.

We have constructed a library of point mutants of the 35 base-pair terminal inverted repeat (IR) of the bacterial transposon gamma delta, a member of the Tn3 family of transposable elements. The effect of the mutant ends, both on the immunity conferred on an IR-containing target plasmid and on the transposition of model transposons, was determined. The region important for immunity was shown to be a 30 base-pair stretch of DNA, running from G8 and A9 to G38; mutations in the outermost seven or eight base-pairs did not significantly affect immunity. Positions at which mutations disrupted immunity chiefly coincided with positions previously determined to constitute three segments of the IR with which gamma delta tranposase protein interacts via major groove contacts. We conclude that sequence-specific binding contacts between gamma delta transposase and its cognate IR are limited to a specific subset of positions (those sensitive to mutation in the immunity assay) within this 30 base-pair region. We found that the innermost of the three major groove contact regions was the most susceptible to mutation, while the outermost was the least. Indications of minor groove contacts were also found. Very few point mutations within the 30 base-pair sequence-specific binding region had much effect on transposition when the mutant ends were in the "wild-type" context with the adjacent integration host factor (IHF) binding site. However, deletion of the IHF site, in some cases, revealed a transposition defect, suggesting that for transposition (but not immunity), IHF-transposase cooperation can largely overcome the effects of reduced transposase binding. Although the outer seven base-pairs were not important for immunity, mutations in the outer three or four eliminated or reduced transposition activity, suggesting that these positions are involved in a step in transposition that follows transposase binding.

Base Sequence↗

Deoxynucleoside triphosphate and pyrophosphate binding sites in the catalytically competent ternary complex for the polymerase reaction catalyzed by DNA polymerase I (Klenow fragment).

We have employed site-directed mutagenesis to identify those amino acid residues that interact with the deoxynucleoside triphosphate (dNTP) and pyrophosphate in the Klenow fragment-DNA-dNTP ternary complex. Earlier structural, mutagenesis, and labeling studies have suggested that the incoming dNTP molecule contacts a region on one side of the polymerase cleft, primarily involving residues within the so-called "fingers" subdomain. We have made mutations in residues seen to be close to the dNTP in the crystal structure of the Klenow fragment-dNTP binary complex and have examined their kinetic parameters, particularly Km(dNTP). The results are consistent with the notion that there are significant differences between the dNTP interactions in the binary and ternary complexes, although some contacts may be present in both. When dTTP is the incoming nucleotide, the side chains of Arg754 and Phe762 make the largest contributions to binding; measurement of Km(PPi) suggests that Arg754 contacts the beta- or gamma-phosphate of the dNTP. With dGTP, the contribution of Arg754 remains the same, but the additional interactions are provided by both Lys758 and Phe762, suggesting that the binding of the incoming dNTP is not identical under all circumstances. Mutations in Arg754 and Lys758 also cause a substantial decrease in the rate of polymerase-catalyzed incorporation, and sulfur elemental effect measurements indicate that loss of Arg754 (and perhaps also Lys758) slows the rate of the chemical step of the reaction. Mutations of Arg682, His734, and Tyr766 affect the binding of DNA, suggesting that these mutations, whose effect on dNTP binding is small, may influence dNTP binding indirectly via the positioning of the DNA template-primer.

Amino Acid Sequence↗

The tyrosine-6 hydroxyl of gamma delta resolvase is not required for the DNA cleavage and rejoining reactions.

Site-specific recombinases of the resolvase and DNA invertase family all contain a tyrosine residue close to the N-terminus, and four residues away from a serine that has been implicated in catalysis of DNA strand breakage and reunion. To examine the role of this tyrosine in recombination, we have constructed a mutant of gamma delta resolvase in which the tyrosine (residue 6) is replaced by phenylalanine. Characterization of the Y6F mutant protein in vitro indicated that although it was highly defective in recombination, it could cleave DNA at the cross-over site, form a covalent resolvase-DNA complex and rejoin the cleaved cross-over site (usually restoring the parental site). These data rule out a direct role of the Tyr-6 hydroxyl as the nucleophile in the DNA cleavage reaction and strengthen the conclusion that this nucleophile is the nearby invariant serine residue, Ser-10. We conclude that Tyr-6 is essential for fully co-ordinated strand cleavage and exchange, but is dispensable for individual strand cleavage and religation reactions.

Amino Acid Sequence↗

Analysis of a nucleoprotein complex: the synaptosome of gamma delta resolvase.

The gamma delta resolvase protein is one of a large family of transposon-encoded site-specific recombinases. It performs recombination in a DNA-protein complex that contains 12 resolvase protomers and two copies of the 120-base pair DNA substrate, res (each with three binding sites for a resolvase dimer). A derivative of resolvase with altered DNA binding specificity was used to show that the role of resolvase at site I, which contains the crossover point, differs from its role at the other two binding sites. The resolvase dimers that initially bind to site I are the only ones that require the residue Ser10, essential for catalysis of DNA breakage. In addition, these site I-bound dimers do not use a specific interaction between dimers that is required elsewhere in the complex for synapsis of the res sites.

Base Sequence↗

Mapping interactions between the catalytic domain of resolvase and its DNA substrate using cysteine-coupled EDTA-iron.

Single cysteine-substituted mutants of gamma delta resolvase have been covalently modified using a novel sulfhydryl-specific EDTA derivative, EDTA-2-aminoethyl 2-pyridyl disulfide (EPD). Iron, chelated by the coupled EDTA and in the presence of reducing agent, generates reactive oxygen species that result in localized cleavage of the DNA to which resolvase is bound. The procedure provides valuable information on two fronts. First, it allows the identification of regions or surfaces of the protein that are in close proximity to DNA even though they may not be part of the DNA-binding domain. Second, it allows identification of the portions of DNA that are closest to each EDTA-derivatized cysteine, since the DNA cleavages observed are highly localized and their efficiency drops rapidly as a function of the distance between the EDTA-Fe complex and the deoxyribose target. We have used the procedure to investigate the interaction of gamma delta resolvase with the three DNA binding sites that constitute its recombination substrate, res. The data indicate that the two N-terminal domains of a resolvase dimer interact symmetrically with site I, which contains the recombination cross-over point, but asymmetrically with the accessory sites, II and III. The patterns of DNA cleavage obtained with several different EDTA-coupled mutants have enabled us to propose a model for the interaction between resolvase and site I.

Base Sequence↗

Protein-protein interactions directing resolvase site-specific recombination: a structure-function analysis.

Recombination catalyzed by the gamma delta resolvase requires assembly of a nucleo-protein complex, the synaptosome, whose structure is determined by resolvase-res and resolvase-resolvase interactions. In crystals of the resolvase catalytic domain, monomers of resolvase were closely associated with one another across three different dyad axes; one of these subunit contacts was shown to be an essential inter-dimer interaction. To investigate the relevance of the remaining two interfaces, we have made site-directed mutations at positions suggested by the structure. Cysteine substitutions were designed to link the interfaces covalently, mutations to arginine were used to disrupt intersubunit contacts, and mutations to tryptophan were used to study the hydrophobicity and solvent accessibility of potential interfaces by fluorescence quenching. Characterization of the mutant proteins has allowed us to identify the dimer interface of resolvase and to assign a structural role to a second intersubunit contact. The data presented here, together with our previous results, suggest that all three of the dyad-related intersubunit interactions observed in the crystal play specific roles in synapsis and recombination.

Arginine↗

Reactions at the polymerase active site that contribute to the fidelity of Escherichia coli DNA polymerase I (Klenow fragment).

In order to study the structural principles governing DNA polymerase fidelity we have measured the rates of insertion of incorrect nucleotides and the rates of extension from the resulting mismatched base pairs, catalyzed by the Klenow fragment of DNA polymerase I. Using a combination of semi-quantitative and qualitative approaches, we have studied each of the 12 possible mismatches in a variety of sequence contexts. The results indicate that Klenow fragment discriminates between mismatches largely on the basis of the identity of the mismatch, with the surrounding sequence context playing a significant, but secondary, role. For purine-pyrimidine and pyrimidine-pyrimidine mispairs, the relative ease of mismatch synthesis and extension can be rationalized using a simple geometrical model, with the important criterion being the extent to which the mismatched base pair can conform to normal DNA geometry. Essentially similar conclusions have been reached in studies of other polymerases, suggesting that this aspect of mispair geometry is sensed and responded to in a similar way by all polymerases. Purine-purine mismatches form a less cohesive class, showing more variable behavior from mispair to mispair, and a greater apparent susceptibility to sequence context effects. Comparison of our data with studies of other polymerases also suggests that different polymerases respond to purine-purine mismatches in distinct and characteristic ways. An extensive analysis of each of the four purine-purine mispairs in approximately 100 different sequence contexts suggests that the reaction is influenced both by the local DNA structure and by the ability of the mismatched terminus to undergo slippage.

Base Composition↗

Side chains involved in catalysis of the polymerase reaction of DNA polymerase I from Escherichia coli.

To continue our mutagenesis study of the polymerase active site of the Klenow fragment of DNA polymerase I, we have characterized new mutants with substitutions at Asp705, Glu710, and Glu883, and have investigated further the mutations in residues Arg668, Gln849, and Asp882, which showed strong Kcat effects in our previous study. To determine which step of the reaction is rate-limiting for each mutant protein, we measured the effect on the reaction rate of an alpha-thio-substituted dNTP. One group of mutants showed a substantial sulfur elemental effect, while a second group, like wild-type Klenow fragment, was unaffected by the phosphorothioate substitution. Consistent with earlier data, these results imply that, between formation of the enzyme-DNA-dNTP ternary complex and completion of phosphodiester bond formation, there are two kinetically distinct steps, only one of which is sensitive to sulfur substitution. The rather complex elemental effect data obtained with the mutant derivatives of Klenow fragment are more consistent with the elemental effect being the result of a steric clash in one of the transition states than with explanations based on electronegativity differences between sulfur and oxygen. The data suggest that the side chain of Asp882 is involved in the proposed steric clash, and that Gln849 and Glu883 participate in the sulfur-sensitive step of the reaction. Based on our results, and comparisons with other phosphoryl transfer enzymes, possible mechanisms for the polymerase reaction are discussed.

Amino Acids↗

Binding of the IS903 transposase to its inverted repeat in vitro.

We have purified the transposase of IS903 in three different ways. We find that transposase expressed as a fusion protein with either glutathione-S-transferase or maltose-binding protein is soluble and can be purified rapidly using affinity chromatography. The third purification requires extracting the native transposase from an insoluble pellet using an alkaline pH buffer. All three proteins bind specifically to the ends of IS903 and give identical patterns of protection when challenged with DNase I. We have used the more stable fusion proteins to examine transposase--DNA interactions in vitro. Methylation interference experiments have identified critical bases for transposase binding; methylated purines that inhibit binding all lie within the inner part of the 18 bp inverted repeat (bp 7-16). Moreover, the positions and identities of these purines suggest that the transposase interacts with base pairs in adjacent major and minor grooves. Binding assays with mutant inverted repeats confirm that transposase binding is sensitive to sequence changes only within this inner region. We propose that the transposase binding site is limited to this domain of the inverted repeat. These data are consistent with our previous analysis of the behaviour of mutant ends in vivo, from which we postulated that the inverted repeat was composed of two functional domains; an inner binding domain (bp 6-18), which included a region of minor groove interactions, and an outer domain that was involved in a step subsequent to transposase binding.

Base Sequence↗

Gamma delta transposase. Purification and analysis of its interaction with a transposon end.

gamma delta, a member of the Tn3 family of prokaryotic transposons, encodes a transposase that binds to the 35-base pair (bp) terminal inverted repeats (IRs) which define the transposing DNA segment. The gamma delta transposase has been overexpressed, identified by molecular weight determination and by immunoblotting, and purified to homogeneity. Production of soluble transposase required the presence of Mg2+ prior to cell lysis. Fractions from a Sephacryl S-300 column contained levels of IR-binding activity that parallel the concentration of transposase, indicating that transposase alone is sufficient for binding to the ends of gamma delta. Hydroxyl radical footprinting indicated that transposase binds to one face of the DNA helix. The protected region extends across the IR and up to 17 bp into the flanking DNA. Integration host factor (IHF), which binds adjacent to transposase, also protects one face of the DNA helix and is shifted about 70 degrees around the helical axis from the transposase protection. Analysis of transposase-DNA complexes by electrophoresis on nondenaturing gels indicated that three complexes, two within the gel and one trapped at the well, result from specific interactions with the IR. The complex in the well and one complex in the gel were analyzed by methylation interference experiments. The results indicate that transposase interacts with specific base pairs between positions 10 and 37 of the IR, a region encompassing three consecutive major and minor grooves. Methylated bases at the very end of the transposon (positions 1-9) and in the flanking DNA did not inhibit transposase binding. Thus, although transposase seems to be in intimate contact throughout the IR of gamma delta and 17 bp of flanking DNA, specific base pair recognition needed for binding appears to be determined by the inner three-quarters of the IR.

Binding Sites↗

Resolvase-catalysed reactions between res sites differing in the central dinucleotide of subsite I.

The resolvase-catalysed reaction between two res sites in a circular DNA substrate normally gives two circular recombination products linked in a two-noded catenane. Homology between the two res sites at the central overlap dinucleotide of subsite I is important for recombination. Reactions between res sites differing at one position in the central dinucleotide (AC X AT) gave a low yield of recombinants containing mismatched base-pairs, but gave large amounts of a non-recombinant four-noded knot. This result was predicted by a 'simple rotation' model for strand exchange. The mismatch is evidently recognized only after commitment to an initial 180 degrees rotation of the resolvase-linked DNA ends, and it induces a second 180 degrees rotation which restores correct base-pairing at the overlap, giving the four-noded product. Correct base-pairing is not essential for religation, but may be important for release of the products. Characteristic patterns of 4, 6, 8 and 10 node knots, or 4, 8, 12 and 16 node knots were obtained, depending on the reaction conditions and the resolvase. Two pathways for multiple rounds of rotation in 360 degrees steps are inferred. The results support a model for strand exchange by supercoil-directed subunit rotation within a resolvase tetramer.

Base Sequence↗

The 3'-5' exonuclease of DNA polymerase I of Escherichia coli: contribution of each amino acid at the active site to the reaction.

We have used site-directed mutagenesis to change amino acid side chains that have been shown crystallographically to be in close proximity to a DNA 3' terminus bound at the 3'-5' exonuclease active site of Klenow fragment. Exonuclease assays of the resulting mutant proteins indicate that the largest effects on exonuclease activity result from mutations in a group of carboxylate side chains (Asp355, Asp424 and Asp501) anchoring two divalent metal ions that are essential for exonuclease activity. Another carboxylate (Glu357) within this cluster seems to be less important as a metal ligand, but may play a separate role in catalysis of the exonuclease reaction. A second group of residues (Leu361, Phe473 and Tyr497), located around the terminal base and ribose positions, plays a secondary role, ensuring correct positioning of the substrate in the active site and perhaps also facilitating melting of a duplex DNA substrate by interacting with the frayed 3' terminus. The pH-dependence of the 3'-5' exonuclease reaction is consistent with a mechanism in which nucleophilic attack on the terminal phosphodiester bond is initiated by a hydroxide ion coordinated to one of the enzyme-bound metal ions.

Amino Acid Sequence↗

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase at 2.7 A resolution.

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase has been determined at 2.7 A resolution. Its first 120 amino acids form a central five-stranded, beta-pleated sheet surrounded by five alpha helices. In one of the four dyad-related dimers, the two active site Ser-10 residues are 19 A apart, perhaps close enough to contact and become covalently linked to the DNA at the recombination site. This dimer also forms the only closely packed tetramer found in the crystal. The subunit interface at a second dyad-related dimer is more extensive and more highly conserved among the homologous recombinases; however, its active site Ser-10 residues are more than 30 A apart. Side chains, identified by mutations that eliminate catalysis but not DNA binding, are located on the subunit surface near the active site serine and at the interface between a third dyad-related pair of subunits of the tetramer.

Binding Sites↗

Cooperativity mutants of the gamma delta resolvase identify an essential interdimer interaction.

gamma delta resolvase, a transposon-encoded site-specific recombinase, catalyzes the resolution of the cointegrate intermediate of gamma delta transposition. The recombination reaction involves the formation of a catalytic nucleoprotein complex whose structure is determined by specific protein-DNA and protein-protein interactions. We have isolated many resolvase mutants and have identified four that are unable to mediate a subclass of higher order protein-protein interactions necessary for recombination. This mutant phenotype is characterized by an inability to catalyze recombination, a loss of cooperative binding to res DNA, and a failure to induce looping out of the DNA between two resolvase binding sites within res. The amino acid side chains identified by the cooperativity mutants cluster on a surface of the protein that mediates an interaction between resolvase dimers in a crystallographic tetramer. We have therefore identified a region of resolvase that mediates an interdimer protein-protein interaction necessary for the formation of the recombinogenic synaptic intermediate.

Amino Acid Sequence↗

Identification of residues critical for the polymerase activity of the Klenow fragment of DNA polymerase I from Escherichia coli.

The Klenow fragment structure, together with many biochemical experiments, has suggested a region of the protein that may contain the polymerase active site. We have changed 7 amino acid residues within this region by site-directed mutagenesis, yielding 12 mutant proteins which have been purified and analyzed in vitro. The results of steady-state kinetic determinations of Km(dNTP) and kcat for the polymerase reaction, together with measurements of DNA binding affinity, suggest strongly that this study has succeeded in targeting important active site residues. Moreover, the in vitro data allow dissection of the proposed active site region into two clusters of residues that are spatially, as well as functionally, fairly distinct. Mutations in Tyr766, Arg841, and Asn845 cause an increase in Km(dNTP), suggesting that contacts with the incoming dNTP are made in this region. Mutations in the second cluster of residues, Gln849, Arg668, and Asp882, cause a large decrease in kcat, suggesting a role for these residues in catalysis of the polymerase reaction. The DNA-binding properties of mutations at positions 849 and 668 may indicate that the catalytic role of these side chains is associated with their interaction with the DNA substrate. Screening of the mutations in vivo for the classical polA-defective phenotype (sensitivity to DNA damage) demonstrated that a genetic screen of this type may be a reasonable predictor or kcat or of DNA binding affinity in future mutational studies.

Amino Acid Sequence↗

Saturation mutagenesis of the DNA site bound by the small carboxy-terminal domain of gamma delta resolvase.

We have analyzed the sequence requirements for the binding of the carboxy-terminal (DNA binding) domain of gamma delta resolvase to its recognition site. Using an efficient procedure for saturation mutagenesis we have obtained 31 of the possible 36 base substitutions within the 12 bp minimal binding sequence (using a modified right half of resolvase binding site I as the model sequence). Binding assays in vitro with the 43 residue DNA binding domain show that certain substitutions at eight of the 12 positions strongly inhibit complex formation, increasing the dissociation constant by 100-fold or more. The critical positions fall into two groups: the outside 6 bp of the binding sequence (positions 1-6) and positions 9-10. These positions correspond to the regions where the DNA binding domain spans the major and minor grooves, respectively, of its binding site. Base substitutions at the intervening positions (7 and 8) have more modest (less than 20-fold) effects on binding while substitutions at the inner two positions (11 and 12) are virtually neutral. The hierarchies of base preferences within each critical segment suggest that resolvase makes base-specific contacts in both major and minor grooves.

Base Composition↗

Role of instability in the cis action of the insertion sequence IS903 transposase.

An unusual subset of DNA-binding proteins, termed cis-acting proteins, has been shown to act preferentially at their site of synthesis; the transposases of several bacterial insertion sequences (ISs) fall into this class. The transposase of IS903 exhibits a strong preference for action in cis: complementation of defective transposons in trans occurs at less than 1%. Furthermore, transposition mediated by transposase acting in cis is extremely sensitive to the distance between the 3' end of the transposase gene and the nearest transposon inverted repeat; we find that an insertion of 1 kilobase of DNA reduces transposition to 1-2% of control levels. Here we show that there is a strong correlation between the stability of transposase and its ability to act in trans. We found that the wild-type transposase is a very unstable protein with a physical half-life of about 3 min. However, a transposase-beta-galactosidase fusion protein has a much greater half-life and can act equally well in cis or in trans. In addition, the native transposase is stabilized in lon- strains of Escherichia coli, and, in these protease-deficient strains, trans action of transposase is increased 10- to 100-fold. These results suggest that instability of the IS903 transposase is a major determinant of its cis action and that the La protease, product of the lon gene, is an important determinant of transposase instability.

DNA Transposable Elements↗

The two functional domains of gamma delta resolvase act on the same recombination site: implications for the mechanism of strand exchange.

During site-specific recombination by the gamma delta resolvase, four DNA strands are broken, exchanged, and religated. This exchange is carried out within a DNA-protein complex, the synaptosome, in which the recombination sites, res, are aligned. The domain of resolvase that binds to a res site is distinct from the domain that breaks and rejoins the DNA. We tested whether the catalytic domain acts on the res site to which its binding domain is bound (in cis) or on the opposing res site in the synaptic complex (in trans). We constructed a hybrid synaptosome in which one res site is bound to wild-type resolvase and the other is bound to a mutant resolvase that binds normally but is unable to break DNA. From the pattern of strand breakage in the reaction intermediate containing resolvase covalently attached to DNA, we conclude that resolvase attacks predominantly, if not exclusively, in cis. Because cis breakage and reunion per se cannot lead to recombination, our results support a model in which DNA exchange is guided by an exchange of resolvase subunits between the breakage and reunion events.

Animals↗