Search PubMed⌕ Search

Biomedical subjects

N D Browning

Publications and source records attributed to N D Browning.

13 recordsLinked to original sources

Embedded nanostructures revealed in three dimensions.

Nanotechnology creates a new challenge for materials characterization because device properties now depend on size and shape as much as they depend on the traditional parameters of structure and composition. Here we show that Z-contrast tomography in the scanning transmission electron microscope has been developed to determine the complete three-dimensional size and shape of embedded structures with a resolution of approximately 1 cubic nanometer. The results from a tin/silicon quantum dot system show that the positions of the quantum dots and their size, shape, structure, and formation mechanism can be determined directly. These methods are applicable to any system, providing a unique and versatile three-dimensional visualization tool.

Journal Article↗

Enhanced current transport at grain boundaries in high-T(c) superconductors.

Large-scale applications of high-transition-temperature (high-T(c)) superconductors, such as their use in superconducting cables, are impeded by the fact that polycrystalline materials (the only practical option) support significantly lower current densities than single crystals. The superconducting critical current density (J(c)) across a grain boundary drops exponentially if the misorientation angle exceeds 2 degrees -7 degrees. Grain texturing reduces the average misorientation angle, but problems persist. Adding impurities (such as Ca in YBa2Cu3O7-delta; YBCO) leads to increased J(c) (refs 9, 10), which is generally attributed to excess holes introduced by Ca2+ substituting for Y3+ (ref. 11). However, a comprehensive physical model for the role of grain boundaries and Ca doping has remained elusive. Here we report calculations, imaging and spectroscopy at the atomic scale that demonstrate that in poly-crystalline YBCO, highly strained grain-boundary regions contain excess O vacancies, which reduce the local hole concentration. The Ca impurities indeed substitute for Y, but in grain-boundary regions under compression and tension they also replace Ba and Cu, relieving strain and suppressing O-vacancy formation. Our results demonstrate that the ionic radii are more important than their electronic valences for enhancing J(c).

Journal Article↗

Atomic scale characterization of the Pt/TiO2 interface.

We present results from an investigation of the Pt/TiO(2) catalyst system using a combination of Z-contrast imaging and electron energy loss spectroscopy (EELS) in the scanning transmission electron microscope. Evidence of a strong interaction between the Pt particles and the support is found to be dependent on the Pt cluster size, being manifested either as an encapsulation of the Pt particles by the support or a distortion of the structure of the Pt particles. In the case of clusters that are only a few atoms in size, we show direct evidence of an epitaxial nucleation relationship between Pt and Titania. The results also show unexpectedly that Pt particles exhibit a preferential nucleation on rutile rather than anatase.

Journal Article↗

Interface structure and atomic bonding characteristics in silicon nitride ceramics.

Direct atomic resolution images have been obtained that illustrate how a range of rare-earth atoms bond to the interface between the intergranular phase and the matrix grains in an advanced silicon nitride ceramic. It has been found that each rare-earth atom bonds to the interface at a different location, depending on atom size, electronic configuration, and the presence of oxygen at the interface. This is the key factor to understanding the origin of the mechanical properties in these ceramics and will enable precise tailoring in the future to critically improve the materials' performance in wide-ranging applications.

Journal Article↗

Role of oxygen at screw dislocations in GaN.

Here we report the first direct atomic scale experimental observations of oxygen segregation to screw dislocations in GaN using correlated techniques in the scanning transmission electron microscope. The amount of oxygen present in each of the three distinct types of screw dislocation core is found to depend on the evolution and structure of the core, and thus gives rise to a varying concentration of localized states in the band gap. Contrary to previous theoretical predictions, the substitution of oxygen for nitrogen is observed to extend over many monolayers for the open core dislocation.

Journal Article↗

High temperature ferromagnetism with a giant magnetic moment in transparent co-doped SnO(2-delta).

The occurrence of room temperature ferromagnetism is demonstrated in pulsed laser deposited thin films of Sn(1-x)Co(x)O(2-delta) (x<0.3). Interestingly, films of Sn(0.95)Co(0.05)O(2-delta) grown on R-plane sapphire not only exhibit ferromagnetism with a Curie temperature close to 650 K, but also a giant magnetic moment of 7.5+/-0.5 micro(B)/Co, not yet reported in any diluted magnetic semiconductor system. The films are semiconducting and optically highly transparent.

Journal Article↗

Comparison of simulation methods for electronic structure calculations with experimental electron energy-loss spectra.

The electronic structure of hexagonal GaN is studied using two simulation techniques in order to develop a method to interpret the fine-structure of an experimental nitrogen K-edge electron energy loss spectrum obtained using a scanning transmission electron microscope. The application of these simulation methods to the bulk spectrum is a necessary first step in developing a fundamental understanding of the effect of changes in the electronic structure on the properties of defects. It is found here that both of the techniques used, multiple scattering (MS) and density functional theory (DFT), produce excellent agreement with the experimental bulk spectrum. The MS method is limited in accuracy but efficient in time, while the DFT method is more accurate but time consuming. Through the combination of these methods, experimental energy loss spectra can be readily understood, and a means to unravel the complexities of the electronic structure can be determined.

Journal Article↗

Nonstoichiometry and the electrical activity of grain boundaries in SrTiO3.

A combination of experiments and first-principles calculations is used to show that grain boundaries in SrTiO3 are intrinsically nonstoichiometric. Total-energy calculations reveal that the introduction of nonstoichiometry into the grain boundaries is energetically favorable and results in structures that are consistent with atomic-resolution Z-contrast micrographs. Electron energy-loss spectra provide direct evidence of nonstoichiometry. These results and calculations for nonstoichiometric grain boundaries provide an explanation of the microscopic origin of the "double Schottky barriers" that dominate the electrical behavior of polycrystalline oxides.

Journal Article↗

Observation of oxygen vacancy ordering and segregation in perovskite oxides.

Oxygen vacancies are known to dominate the overall electrical behavior of perovskite oxides, which are used in many applications. Although theories have been developed to explain the effect of these vacancies and the defect chemistry of perovskites, there has yet to be incontrovertible evidence of the fundamental origins of the structure-property relationship. However, recently developed technologies in scanning transmission electron microscopy, such as Z-contrast imaging and EELS combined with in-situ heating experiments, provide a new opportunity to address vacancy characteristics and defect chemistry on the basic atomic level. In this paper we discuss the practical aspects of these techniques and demonstrate their application to the characterization of defect chemistry and vacancies in ordered micro-domains, at domain boundaries and at grain boundaries.

Journal Article↗

Application of atomic scale STEM techniques to the study of interfaces and defects in materials.

Incoherent imaging and analysis techniques in the scanning transmission electron microscope (STEM) provide the potential to map changes in structure, composition and bonding that occur at materials interfaces and defects on the fundamental atomic scale. Such comprehensive characterization capabilities permit a detailed analysis of the structure-property relationships of interfaces and defects to be performed. In this paper, we discuss the resolution limits of such techniques in the JEOL 2010F STEM/TEM operating both under standard conditions and at elevated temperatures. Examples of the use of such techniques to quantify the atomic scale defect chemistry at interfaces and defects in perovskite oxides, the growth and structure of II-VI and III-V quantum dots and the electronic structure of threading dislocations in GaN will also be presented.

Journal Article↗

Microscopy in solid state science.

The Microstructural Physics group at the Cavendish Laboratory is actively involved in a considerable number of research projects which cover a broad range of materials science. In this paper, we describe briefly several such projects, with particular emphasis given to the application of parallel-detection electron energy loss spectroscopy (PEELS) on a scanning transmission electron microscope (STEM) to the analysis of materials such as stainless steels, catalysts, and high temperature superconductors. In addition, we describe a number of related projects that are currently being carried out in the group, particularly those which utilise and develop novel STEM imaging and analytical techniques.

Aerosols↗