Biomedical subjects

Myung-Suk Chun

Publications and source records attributed to Myung-Suk Chun.

6 recordsLinked to original sources

PubMed2006

Surface properties of submicrometer silica spheres modified with aminopropyltriethoxysilane and phenyltriethoxysilane.

The surface of submicrometer silica spheres are modified with aminopropyl and phenyl groups through a one-step process. Various experimental techniques, i.e., scanning electron microscopy (SEM), quasi-elastic light scattering (QELS), differential scanning calorimetry (DSC), thermogravimetry (TG), zeta potential measurement, nitrogen sorption, and water vapor and organic dye adsorption are used to comprehensively characterize the pure (TEOS particles) and modified silica particles. The SEM micrographs of the particles demonstrate that the modified particles are spherical with uniform size and shape. The particles modified with aminopropyl groups (APTES particles) show the highest isoelectric point (IEP) and the highest weight loss at 780 degrees C because of the basic nature of aminopropyl groups and the higher reactivity of aminopropyltriethoxysilane. The particles modified with the phenyl groups (PhTES particles) show the lowest water vapor adsorption because their surface is more hydrophobic than that of TEOS and APTES particles. The organic dye (brilliant blue FCF or BBF) adsorption experiments demonstrate that the adsorption capacity of the particles increases greatly after acidification. This is caused by the protonation of silanol groups and amine groups on the particle surface, which presents an enhanced electrostatic attraction with BBF anions. The APTES particles exhibit the highest dye adsorption due to the hydrophobic attractions and the enhanced electrostatic attractions from aminopropyl groups.

Adsorption↗

PubMed2006

Fabrication and validation of a multi-channel type microfluidic chip for electrokinetic streaming potential devices.

To elaborate on the applicability of the electrokinetic micro power generation, we designed and fabricated the silicon-glass as well as the PDMS-glass microfluidic chips with the unique features of a multi-channel. Besides miniaturizing the device, the key advantage of our microfluidic chip utilization lies in the reduction in water flow rate. Both a distributor and a collector taking the tapered duct geometry are positioned aiming the uniform distribution of water flow into all individual channels of the chip, in which several hundreds of single microchannels are assembled in parallel. A proper methodology is developed accompanying the deep reactive ion etching as well as the anodic bonding, and optimum process conditions necessary for hard and soft micromachining are presented. It has been shown experimentally and theoretically that the silicon-based microchannel leads to increasing streaming potential and higher external current compared to those of the PDMS-based one. A proper comparison between experimental results and theoretical computations allows justification of the validity of our novel devices. It is useful to recognize that a material inducing a higher magnitude of zeta potential has an advantage for obtaining higher power density under the same external resistance.

Algorithms↗

PubMed2005

Surface functional group effect on atomic force microscope anodization lithography.

The lithographic effect of surface chemical functional groups of organic resists on atomic force microscope (AFM) anodization lithography is investigated using mixed self-assembled monolayers (SAMs). The SAM resist films were prepared with 1,12-diaminododecane dihydrochloride (DAD.2HCl), n-tridecylamine hydrochloride (TDA.HCl), and 1,12-diaminododecane hydrochloride (DAD.HCl), and their film characteristics were evaluated by ellipsometry, zeta-potential measurements, and AFM. The lithographic results indicate that the most dominant factor of the surface functional group effect is the electrochemical property of the surface groups as an anode surface in the anodization reaction, and the dimensions of the protruded patterns are critically determined by the wetting property of the resist surface. By controlling the surface chemical groups with considerations of their effects, high-speed patterning at 2 mm/s was achieved successfully using the mixed SAM resist of DAD.2HCl and TDA.HCl.

Journal Article↗

PubMed2004

Rigorous calculations of linearized Poisson-Boltzmann interaction between dissimilar spherical colloids and osmotic pressure in concentrated dispersions.

We present computational results on the static properties of concentrated dispersions of bidisperse colloids. The long-range electrostatic interactions between dissimilar spherical colloids are determined using the singularity method, which provides rigorous solutions to the linearized electrostatic field. The NVT Monte Carlo simulation is applied to the bulk suspension to obtain the radial distribution function for the concentrated system. The increasing trend of osmotic pressure with increasing total particle concentration is reduced as the concentration ratio between large and small particles is increased. The increase of electrostatic interaction between similarly charged particles caused by the Debye screening effect provides an increase in the osmotic pressure. From the estimation of total structure factor, we observe the strong correlations developed between dissimilar spheres, and the small spheres are expected to tend to fit into the spaces between the larger ones. As the particle concentration increases at a given ionic strength, the magnitude of the first peak in structure factors increases and also moves to higher wavenumber values.

Journal Article↗

PubMed2003

Estimation of zeta potential by electrokinetic analysis of ionic fluid flows through a divergent microchannel.

The streaming potential is generated by the electrokinetic flow effect within the electrical double layer of a charged solid surface. Surface charge properties are commonly quantified in terms of the zeta potential obtained by computation with the Helmholtz-Smoluchowski (H-S) equation following experimental measurement of streaming potential. In order to estimate a rigorous zeta potential for cone-shaped microchannel, the correct H-S equation is derived by applying the Debye-Hückel approximation and the fluid velocity of diverging flow on the specified position. The present computation provides a correction ratio relative to the H-S equation for straight cylindrical channel and enables us to interpret the effects of the channel geometry and the electrostatic interaction. The correction ratio decreases with increasing of diverging angle, which implies that smaller zeta potential is generated for larger diverging angle. The increase of Debye length also reduces the correction ratio due to the overlapping of the Debye length inside of the channel. It is evident that as the diverging angle of the channel goes to nearly zero, the correction ratio converges to the previous results for straight cylindrical channel.

Journal Article↗

PubMed2003

On the behavior of electrokinetic streaming potential during protein filtration with fully and partially retentive nanopores.

An experimental investigation of the electrokinetic streaming potentials of both fully and partially retentive nanopores as compared with the filtration progress of dilute globular protein solution under different surface charge conditions was performed using hollow fibers. The streaming potential is generated by the electrokinetic flow effect within the electric double layer of the charged surface. Depending on the solution pH, both the protein and the pore wall can be either repulsive or attractive due to the long-range electrostatic interaction. The repulsive electrostatic interaction allows the protein particles to stay in a suspended state above the outer surface of hollow fibers instead of being deposited. The apparent streaming potential value at partially retentive pores is larger than that at fully retentive pores for the oppositely charged case; however, the opposite behavior is shown for the same-charged case. The axial-position-dependent streaming potential was also observed in order to explore the development of a concentration polarization layer during the cross-flow filtration. The time evolution of the streaming potential during the filtration of protein particles is related to the filtrate flux, from which it can be found to provide useful real-time information on particle deposition onto the outer surfaces of hollow fibers.

Animals↗