Search PubMed⌕ Search

Biomedical subjects

Murali Sastry

Publications and source records attributed to Murali Sastry.

At least 55 records · Page 3Linked to original sources

A low-temperature, soft chemistry method for the synthesis of zirconia nanoparticles in thermally evaporated fatty amine thin films.

We demonstrate the synthesis of zirconia nanoparticles in a lipid matrix by a simple, low temperature beaker-based process. This is accomplished by electrostatic entrapment of ZrF6(2-) ions within thermally evaporated octadecylamine (ODA) thin films followed by the low-temperature in situ hydrolysis of the entrapped metal ion complexes. The zirconia particles thus formed were of the monoclinic phase and were fairly monodisperse with particles of average size 40 nm. The zirconia crystallites appeared to exhibit preferred orientation indicating epitaxial growth of the crystals within the lipid matrix. The formation of zirconia nanoparticles in the lipid matrix was investigated using quartz crystal microgravimetry (QCM), optical absorption spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and X-ray diffraction (XRD) techniques.

Journal Article↗

Water-dispersible tryptophan-protected gold nanoparticles prepared by the spontaneous reduction of aqueous chloroaurate ions by the amino acid.

The synthesis of water-dispersible amino-acid-protected gold nanoparticles by the spontaneous reduction of aqueous chloroaurate ions by tryptophan is described. Water-dispersible gold nanoparticles may also be obtained by the sequential synthesis of the gold nanoparticles by borohydride reduction of chloroauric acid followed by capping with tryptophan. Comparison of the proton NMR spectroscopic signatures from the tryptophan-protected gold nanoparticles obtained by the two processes indicated that the indole group in tryptophan is responsible for reduction of the aqueous chloroaurate ions. The reduction of the metal ions is accompanied by oxidative polymerization of the indole group of the tryptophan molecules and, consequently, some degree of cross-linking of the gold nanoparticles.

Amino Acids↗

Biosynthesis of CaCO3 crystals of complex morphology using a fungus and an actinomycete.

The biosynthesis of CaCO3 by reaction of aqueous Ca2+ ions with a fungus, Fusarium sp., and an actinomycete, Rhodococcus sp. (both plant organisms), is described. In the case of the fungus, cruciform-shaped calcite crystals are obtained (SEM picture A) while the actinomycete yielded the unstable polymorph of CaCO3, vaterite (SEM picture B). Specific proteins secreted by the microorganisms are responsible for the morphology and crystallography control observed. A highlight of this approach is that the microorganisms also provide CO2 for reaction with the Ca2+ ions, making the crystals completely biogenic.

Calcium Carbonate↗

Phase transfer of silver nanoparticles from aqueous to organic solutions using fatty amine molecules.

We demonstrate the phase transfer of silver nanoparticles synthesized in an aqueous medium into hexane containing the cationic surfactant octadecylamine (ODA). During vigorous shaking of the biphasic mixture, rapid phase transfer of the silver nanoparticles into the organic phase was observed. The phase transfer of the silver nanoparticles arises due to coupling of the silver nanoparticles with the ODA molecules present in organic phase via either coordination bond formation or weak covalent interaction. This process renders the nanoparticles sufficiently hydrophobic and dispersible in the organic phase. The ODA-stabilized silver nanoparticles could be separated out from the organic phase in the form of a powder and are readily redispersible in different organic solvents. The nature of binding of the ODA molecules to the silver nanoparticle surface was characterized using UV-vis spectroscopy, thermogravimetry, transmission electron microscopy, nuclear magnetic resonance spectroscopy, X-ray photoemission spectroscopy, and Fourier transform infrared spectroscopy.

Journal Article↗

Keggin ions as UV-switchable reducing agents in the synthesis of Au core-Ag shell nanoparticles.

Keggin ion-mediated synthesis of Au core-Ag shell bimetallic nanoparticles is described. Exposure of photochemically reduced aqueous (PW12O40)3- Keggin ions to AuCl4- ions leads to the formation of stable gold nanoparticles capped by the Keggin ions. The surface-bound Keggin ions may then be activated by UV irradiation and, upon exposure to Ag+ ions, reduce the metal ions to form a silver shell around the gold core. That the capping agent not only stabilizes the metal nanoparticles but also plays the role of a switchable reducing agent is a highlight of this approach with important implications in nanomaterials synthesis and catalysis.

Journal Article↗

Langmuir-Blodgett films of laurylamine-modified hydrophobic gold nanoparticles organized at the air-water interface.

The organization of hydrophobized colloidal gold nanoparticles at air-water interface and the formation thereafter of lamellar, multilayer films of the gold nanoparticles by the Langmuir-Blodgett technique is described in this paper. The hydrophobization of the colloidal particles was accomplished by the direct chemisorption of laurylamine molecules on aqueous colloidal gold nanoparticles during a phase-transfer process. While monolayers of the laurylamine-capped gold nanoparticles at the air-water interface were not amenable to layer-by-layer transfer onto solid supports, it was observed that addition of the water-insoluble amphiphile octadecanol to the gold nanoparticle solution improved the stability of the monolayer at the interface as well as the multilayer assembly protocol. The organization of the gold nanoparticles at the air-water interface was followed by surface pressure-area isotherm measurements while the formation of multilayer films of the nanoparticles by the Langmuir-Blodgett technique was monitored by quartz crystal microgravimetry, UV-vis spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy.

Journal Article↗

A new method for the synthesis of hydrophobic gold nanotapes.

Protocols for the synthesis of gold nanoparticles are increasingly focusing on controlling the morphology of the nanocrystals. We demonstrate in this article the facile, one-step synthesis of gold nanotapes that are readily dispersible in organic media. This is accomplished by the spontaneous reduction of aqueous chloroaurate ions by hexadecylaniline molecules present in chloroform at the static interface between water and chloroform. The hexadecylaniline molecules cap the gold nanotapes thus formed, rendering them hydrophobic and dispersible in a range on nonpolar and weakly polar organic solvents. Possible reasons for the growth of gold nanotapes are discussed.

Aniline Compounds↗

Enzyme mediated extracellular synthesis of CdS nanoparticles by the fungus, Fusarium oxysporum.

The biosynthesis of Q-state CdS nanoparticles by reaction of aqueous CdSO4 solution with the fungus, Fusarium oxysporum, is demonstrated. Nanoparticle formation proceeds by release of sulfate reductase enzymes by the fungus, conversion of sulfate ions to sulfide ions that subsequently react with aqueous Cd2+ ions to yield highly stable CdS nanoparticles. Elucidation of an enzymatic pathway using fungi opens up the exciting possibility of developing a rational, biosynthesis strategy for nanomaterials over a range of chemical compositions which is currently not possible.

Cadmium↗

Entrapment of proteins and DNA in thermally evaporated lipid films.

The immobilization of biomacromolecules such as proteins, enzymes and DNA in various inert matrices is a problem that attracts considerable attention and is motivated by fundamental, biomedical and industrial interests. In addition to several other entrapping matrices, lipids in the form of monolayers and bilayers are versatile hosts owing to their membrane-mimicking capability, bio-friendliness, flexibility and inertness. Here, we discuss the immobilization of proteins, enzymes and DNA via electrostatic interactions in films of thermally evaporated fatty lipids. The role of the lipid in preserving the natural conformation of the biomolecule, protection against harsh environmental conditions and accessibility to substrates and reagents is an important feature of the protocol and is highlighted.

Amines↗

Electrostatic assembly of nanoparticles and biomacromolecules.

The controlled assembly of nanoparticles in thin film form on solid supports, both as monolayers and as superlattice structures, is a problem of considerable topical interest. Among the many interactions used to program the assembly of nanoparticles, electrostatic forces are particularly interesting for many reasons. This Account deals with assembling surface-modified nanoparticles in thin film form using electrostatic interactions at the air-water interface and in thermally evaporated lipid films. The generality of the electrostatic assembly protocol is demonstrated in the immobilization of DNA and proteins in lipid films.

Air↗

Quasi-linear assemblies of silver nanoparticles by highly localized anodic dissolution of copper in the hydrosol.

The assembly of silver nanoparticles into quasi-linear superstructures in solution has been demonstrated. A small dc voltage applied to fine-tipped, L-shaped copper electrodes immersed in aqueous carboxylic acid-derivatized silver nanoparticle solution leads to the anodic dissolution of copper ions. The controlled release of Cu2+ ions within the gaps results in local screening of repulsive coulombic interactions between the silver nanoparticles and the consequent formation of aggregates that are extremely stable in time. Atomic force and transmission electron microscopy images of the silver nanoparticle solution after application of an electric field showed the presence of a large number of silver nanoparticle assemblies in open, quasi-linear structures. Such open structures do not form if Cu2+ ions are added directly to the silver nanoparticle solution.

Carboxylic Acids↗

Penicillin G acylase-fatty lipid biocomposite films show excellent catalytic activity and long term stability/reusability.

The formation of biocomposite films of the pharmaceutically important enzyme penicillin G acylase (PGA) and fatty lipids under enzyme-friendly conditions is described. The approach involves a simple beaker-based diffusion protocol wherein the enzyme diffuses into the lipid film during immersion in the enzyme solution, thereby leading to the formation of a biocomposite film. The incorporation of the enzyme in both cationic as well as anionic lipids suggests the important role of secondary interactions such as hydrophobic and hydrogen bonding in the enzyme immobilization process. The kinetics of formation of the enzyme-lipid biocomposites has been studied by quartz crystal microgravimentry (QCM) measurements. The stability of the enzyme in the lipid matrix was confirmed by Fourier transform infrared spectroscopy (FTIR) and biocatalytic activity measurements. Whereas the biological activity of the lipid-immobilized enzyme was marginally higher than that of the free enzyme, the biocomposite film exhibited increased thermal/temporal stability. Particularly exciting was the observation that the biocomposite films could be reused in biocatalysis reactions without significant loss in activity, which indicates potentially exciting biomedical/industrial application of these films.

Catalysis↗

Improved performance of preordered fungal protease-stearic acid biocomposites: enhanced catalytic activity, reusability, and temporal stability.

In an earlier report on fungal protease (F-prot)-fatty acid biocomposite film formation [Gole et al. Anal. Chem. 2000, 72, 4301], it was observed that the biocatalytic activity of the immobilized enzyme was comparable to that of the free enzyme in solution. However, a somewhat negative aspect of the protocol was the steady loss in activity during reuse and storage of the biocomposite film. In this paper, we address the latter issues and demonstrate successful attempts toward the realization of efficient biocomposite films with enhanced biological activity, temporal stability, and excellent reusability. The improved performance of the F-prot-stearic acid biocomposite is accomplished by preordering the fatty acid film by incorporation of Pb(2+) ions into the lipid matrix prior to enzyme immobilization. The lead cation induces lamellar ordering in the lipid film and thus facilitates diffusion of the F-prot molecules into the lipid matrix and accessibility of the substrate molecules (hemoglobin, Hb) to the entrapped F-prot enzyme molecules. The preordering consequently leads to effective control of the "mass transport" problem and might be responsible for the enhanced biological activity ( approximately 36%) of the enzyme molecules in the biocomposite in comparison with the free enzyme in solution, as well the excellent reusability of the composite film. In addition to biocatalytic activity measurements, the formation and characterization of the F-prot-lead stearate biocomposite films was done by quartz crystal microgravimetry and X-ray diffraction.

Catalysis↗

Candida bombicola cells immobilized on patterned lipid films as enzyme sources for the transformation of arachidonic acid to 20-HETE.

Preparation of biocompatible surfaces for immobilization of enzymes and whole cells is an important aspect of biotechnology due to their potential applications in biocatalysis, biosensing, and immunological applications. In this report, patterned thermally evaporated octadecylamine (ODA) films are used for the immobilization of Candida bombicola cells. The attachment of the cells to the ODA film surface occurs possibly through nonspecific interactions such as hydrophobic interactions between the cell walls and the ODA molecules. The enzyme cytochrome P450 present in the immobilized yeast cells on the ODA film surface was used for the transformation of the arachidonic acid to 20-hydroxyeicosatetraenoic acid (20-HETE). The assembly of cells on the hydrophobic ODA surface was confirmed by quartz crystal microgravimetry (QCM), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). SEM images confirmed the strong binding of the yeast cells to the ODA film surface after biocatalytic reactions. Moreover, the biocomposite films could be easily separated from the reaction medium and reused.

Amines↗