Biomedical subjects

Molly M Stevens

Publications and source records attributed to Molly M Stevens.

13 recordsLinked to original sources

PubMed2006

Extracellular matrix formation and mineralization on a phosphate-free porous bioactive glass scaffold using primary human osteoblast (HOB) cells.

Sol-gel derived bioactive glasses of the 70S30C (70mol% SiO2, 30mol% CaO) composition have been foamed to produce 3D bioactive scaffolds with hierarchical interconnected pore morphologies similar to trabecular bone. The aim of this study was to investigate primary human osteoblast response to porous bioactive glass scaffolds. The scaffolds supported osteoblast growth and induced differentiation, within the 3-week culture period, as depicted by enhanced ALPase enzymatic activity, without the addition of supplementary factors such as ascorbic acid, beta-glycerophosphate and dexamethasone. This is the first time this has been observed on a bioactive glass that does not contain phosphate. Deposition of extracellular matrix was also confirmed by enhanced production of the extracellular matrix protein collagen type I. SEM showed indications of mineralized bone nodule formation without the addition of growth factors. The 70S30C bioactive glass scaffolds therefore fulfil many of the criteria for an ideal scaffold for bone tissue engineering applications.

Calcification, Physiologic↗

PubMed2006

Novel materials for bone and cartilage regeneration.

Materials that enhance bone and cartilage regeneration promise to be valuable in both research and clinical applications. Both natural and synthetic polymers can be used to create scaffolds that support cells and incorporate cues which guide tissue repair. Recently, electrospinning, peptide self-assembly and biomineralisation have been employed to fabricate nanostructured scaffolds that better mimic the complex extracellular environment found within tissues, in vivo. The incorporation of peptide motifs recognised by cell receptors and the use of recombinant DNA technology have enabled the creation of scaffolds with new levels of biofunctionality. Advances in materials design will enhance our ability to create highly tailored cellular environments for bone and cartilage regeneration.

Biocompatible Materials↗

PubMed2006

Synthesis of two-component injectable polyurethanes for bone tissue engineering.

The advent of injectable polymer technologies has increased the prospect of developing novel, minimally invasive arthroscopic techniques to treat a wide variety of ailments. In this study, we have synthesised and evaluated a novel polyurethane-based injectable, in situ curable, polymer platform to determine its potential uses as a tissue engineered implant. Films of the polymers were prepared by reacting two pentaerythritol-based prepolymers, and characterised for mechanical and surface properties, and cytocompatibility. This polymer platform displayed mechanical strength and elasticity superior to many injectable bone cements and grafts. Cytotoxicity tests using primary human osteoblasts, revealed positive cell viability and increased proliferation over a period of 7 days in culture. This favourable cell environment was attributed to the hydrophilic nature of the films, as assessed by dynamic contact angle (DCA) analysis of the sample surfaces. The incorporation of beta-TCP was shown to improve mechanical properties, surface wettability, and cell viability and proliferation, compared to the other sample types. SEM/EDX analysis of these surfaces also revealed physicochemical surface heterogeneity in the presence of beta-TCP. Based on preliminary mechanical analysis and cytotoxicity results, these injectable polymers may have a number or potential orthopaedic applications; ranging from bone glues to scaffolds for bone regeneration.

Aged↗

PubMed2006

In vitro toxicology evaluation of pharmaceuticals using Raman micro-spectroscopy.

Raman micro-spectroscopy combined with multivariate analysis was employed to monitor real-time biochemical changes induced in living cells in vitro following exposure to a pharmaceutical. The cancer drug etoposide (topoisomerase II inhibitor) was used to induce double-strand DNA breaks in human type II pneumocyte-like cells (A549 cell-line). Raman spectra of A549 cells exposed to 100 microM etoposide were collected and classical least squares (CLS) analysis used to determine the relative concentrations of the main cellular components. It was found that the concentrations of DNA and RNA significantly (P < 0.05) decreased, whilst the concentration of lipids significantly (P < 0.05) increased with increasing etoposide exposure time as compared to control untreated A549 cells. The concentration of DNA decreased by 27.5 and 87.0% after 24 and 48 h exposure to etoposide respectively. Principal components analysis (PCA) successfully discriminated between treated and untreated cells, with the main variance between treatment groups attributed to changes in DNA and lipid. DNA fragmentation was confirmed by Western blot analysis of apoptosis regulator protein p53 and cell metabolic activity determined by MTT assay. The over-expression of p53 protein in the etoposide treated cells indicated a significant level of DNA fragmentation and apoptosis. MTT tests confirmed that cellular metabolic activity decreased following exposure to etoposide by 29.4 and 61.2% after 24 and 48 h, respectively. Raman micro-spectroscopy may find applications in the toxicology screening of other drugs, chemicals and new biomaterials, with a range of cell types.

Apoptosis↗

PubMed2005

Exploring and engineering the cell surface interface.

Cells are inherently sensitive to local mesoscale, microscale, and nanoscale patterns of chemistry and topography. We review current approaches to control cell behavior through the nanoscale engineering of materials surfaces. Far-reaching implications are emerging for applications including medical implants, cell supports, and materials that can be used as instructive three-dimensional environments for tissue regeneration.

Animals↗

PubMed2005

Collagen composite hydrogels for vocal fold lamina propria restoration.

Chronic voice impairment due to scarring of the vocal fold (VF) lamina propria (LP) can be debilitating in terms of quality of life. Due to the dependence of normal VF vibration on proper VF geometry, an implant inserted to restore appropriate shape and pliability to scarred LP should ideally maintain its insertion-dimensions while being replaced by newly synthesized extracellular matrix (ECM). In the present study, collagen-alginate and collagen-hyaluronan (HA) composite hydrogels were investigated for their ability to support ECM synthesis by VF fibroblasts with limited hydrogel compaction and/or resorption. Collagen-HA composites showed significant mass loss over 28 days of culture, with little evidence of new matrix production. Collagen-alginate composites, in contrast, resisted scaffold compaction and mass loss for at least 42 days in culture while allowing for ECM synthesis. Collagen-alginate hydrogels appear to be promising materials for VF restoration, warranting further investigation.

Alginates↗

PubMed2005

In vivo engineering of organs: the bone bioreactor.

Treatment of large defects requires the harvest of fresh living bone from the iliac crest. Harvest of this limited supply of bone is accompanied by extreme pain and morbidity. This has prompted the exploration of other alternatives to generate new bone using traditional principles of tissue engineering, wherein harvested cells are combined with porous scaffolds and stimulated with exogenous mitogens and morphogens in vitro and/or in vivo. We now show that large volumes of bone can be engineered in a predictable manner, without the need for cell transplantation and growth factor administration. The crux of the approach lies in the deliberate creation and manipulation of an artificial space (bioreactor) between the tibia and the periosteum, a mesenchymal layer rich in pluripotent cells, in such a way that the body's healing mechanism is leveraged in the engineering of neotissue. Using the "in vivo bioreactor" in New Zealand White rabbits, we have engineered bone that is biomechanically identical to native bone. The neobone formation followed predominantly an intramembraneous path, with woven bone matrix subsequently maturing into fully mineralized compact bone exhibiting all of the histological markers and mechanical properties of native bone. We harvested the bone after 6 weeks and transplanted it into contralateral tibial defects, resulting in complete integration after 6 weeks with no apparent morbidity at the donor site. Furthermore, in a proof-of-principle study, we have shown that by inhibiting angiogenesis and promoting a more hypoxic environment within the "in vivo bioreactor space," cartilage formation can be exclusively promoted.

Alginates↗

PubMed2005

Direct patterning of mammalian cells onto porous tissue engineering substrates using agarose stamps.

This paper describes simple, inexpensive, and potentially generic methodology for generating patterns of mammalian cells on porous scaffolds for tissue engineering using replica printing. Circular patterns (diameter: 200, 700, and 1000 microm) of human osteoblasts were transferred directly from topographically patterned agarose stamps onto porous hydroxyapatite scaffolds or onto fibronectin-coated glass slides. The use of hydrogel stamps provided a "wet", biocompatible surface and maintained the viability of cells adsorbed on stamps during the patterning process. Stamps inked once with suspensions of cells allowed the repeated patterning of substrates. Direct stamping of human osteoblasts (and, potentially other mammalian cells) can be used to control the size, spacing, and geometry of patterns of cells printed on porous tissue engineering substrates. This approach may find use in controlling the spatial invasion of scaffolds, promoting the hierarchical organization of cells, and in controlling cell-cell interactions as a step in preservation of phenotypes of cells.

Actins↗

PubMed2004

pH-dependent behavior of surface-immobilized artificial leucine zipper proteins.

The coiled-coil protein motif occurs in over 200 proteins and has generated interest for a range of applications requiring surface immobilization of the constituent peptides. This paper describes an investigation of the environment-responsive behavior of a monolayer of surface-immobilized artificial proteins, which are known to assemble to form coiled-coil structures in bulk solution. An extended version of the quartz crystal microbalance (QCM-D) and surface plasmon resonance (SPR) are independently employed to characterize the adsorption of the proteins to a gold surface. The data suggest that the molecules arrange in a closely packed layer orientated perpendicular to the surface. QCM-D measurements are also employed to measure pH-induced changes in the resonant frequency (f) and the energy dissipation factor (D) of a gold-coated quartz crystal functionalized with the formed monolayer. Exposure of the protein monolayer to a pH 4.5 solution results in a shift of 43 Hz in f and a shift of -0.7 x 10(-6) in D as compared to pH 7.4. In contrast, increasing the pH to 11.2, results in f and D shifts of -17 Hz and 0.6 x 10(-6), respectively. The magnitude of the observed shifts suggests that the proteins form a rigid layer at low pH that can be hydrated to a fluid layer as the pH is increased. These observations correlate with spectroscopic changes that indicate a reduction in the helical content of the protein in bulk solutions of high pH.

Adsorption↗

PubMed2004

A rapid-curing alginate gel system: utility in periosteum-derived cartilage tissue engineering.

In this study, we have developed a rapid-curing alginate gel system and demonstrated its utility as a scaffold for periosteum-derived chondrogenesis for articular cartilage tissue engineering applications. A homogeneous mechanically stable gel was formulated by inducing gelation of a 2% (w/v) solution of a high G content alginate (65-75% G) with a 75 mM solution of CaCl(2). The gel exhibited near-elastic behavior at low levels of deformation (15%, R(2)=0.996), Young's modulus of 0.17+/-0.01 MPa, and rapid gelation kinetics (<1 min to completion). The in vitro cell culture of chondrocytes in the gel yielded alginate/cell constructs that lacked the continuous, interconnected collagen/proteoglycan network of hyaline cartilage. In addition, we have demonstrated that this gel system is capable of supporting periosteum-derived chondrogenesis. We observed that when whole-tissue explants of periosteum were cultured in vitro within the gel, after 6 weeks, significant quantities (>50%) of the total area of the periosteal explants was composed of cartilage that was hyaline-like in appearance and contained cartilage-specific proteoglycans and type-II collagen. It is envisioned that such explants could be transplanted or regenerated in vivo within the biodegradable alginate matrix for the treatment of partial or full-thickness defects in articular cartilage. Importantly, the injectable delivery of the gel could be used in filling complex defects in the articular surface via minimally invasive procedures.

Alginates↗

PubMed2004

FGF-2 enhances TGF-beta1-induced periosteal chondrogenesis.

The use of periosteum as a cell source for the in vitro engineering of grafts for articular cartilage repair requires the development of methods to obtain high viable cell numbers in the early stages of culture. In this study, we demonstrate that the addition of a mitogen, fibroblast growth factor-2 (FGF-2), during the early stage of the in vitro culture of periosteum in the presence of transforming growth factor-beta1 (TGF-beta1), significantly enhances cell proliferation, which results in increased neo-cartilage formation at later stages. Periosteal explants were cultured in vitro within alginate or agarose based gels in the presence of either FGF-2 for the first week, TGF-beta1 for the first 2 weeks, FGF-2 and TGF-beta1 for the first week and first 2 weeks respectively, or no added factors. Consistent with previous studies, periosteum derived neo-chondrogenesis occurred only in the presence of TGF-beta1. The neo-cartilage was found to contain cartilage specific proteoglycans and Type-II collagen as determined by safranin-O and immunohistochemical staining respectively. Further medium supplementation with FGF-2 stimulated early cell proliferation (>3 fold higher total DNA content per explant at day 10). This resulted in a marked increase in the size of the cultured explants and in the total area of the explant staining positive for safranin-O (from around 50% to 85%, (p<0.05)) after 6 weeks culture. The ability to generate significant quantities of neo-cartilage within a biocompatible and biodegradable matrix such as alginate, which lacks the immunogenicity of agarose, could open new pathways to utilizing such constructs in articular cartilage tissue engineering applications.

Alginates↗

PubMedDate not supplied

Molecular level investigations of the inter- and intramolecular interactions of pH-responsive artificial triblock proteins.

Intelligent materials that can undergo physical gelation in response to environmental stimuli have potential impacts in the bioengineering and biomedical fields where the entrapment of cellular or molecular species is desired. Here, we utilize atomic force microscopy (AFM) to perform molecular level investigations of designer artificial proteins that undergo physical gelation. These are engineered as triblock copolymers with independent interchain binding and solvent retention functions, namely, two terminal leucine zipper-like peptide sequences and a central alanylglycine rich sequence, respectively. AFM force measurements between probes and surfaces functionalized with molecules of this triblock protein revealed adhesive interactions that increased in average force and frequency as the pH was lowered from pH 11.2 to 7.4 to 4.5, reflecting an increase in the numbers of interacting molecular strands. In bulk solution, lowering the pH results in a viscous liquid to gel transition. The modular design of the triblock protein was also exploited for single molecule force spectroscopy investigations, which revealed altered intramolecular interactions in response to changes in pH. An increased understanding of the inter- and intramolecular forces involved in biomolecule driven gelation processes is not only of great fundamental interest in the study of the biomolecular systems involved but may also prove key in enabling the rational design of new generations of intelligent hydrogel systems.

Amino Acid Sequence↗

PubMedDate not supplied

Hydraulic elevation of the periosteum: a novel technique for periosteal harvest.

Periosteum has been promoted as a potential substrate for tissue engineering. Its principal virtues are that it has a source of pluripotential mesenchymal cells and chondrogenic growth factors located in the cambium layer, and it can serve as a template for directional evolution of neo-tissue. The clinical use and in vitro study of periosteum-derived neo-tissue has been limited by the level of surgical skill required for harvest. Precise surgical technique, task-specific experience, adequate volume of procedures, and general surgical expertise are required for optimal harvest using the traditional periosteal elevator method. This report describes an easily mastered technique that preserves viability while providing the harvest of relatively large amounts of periosteum. Skeletally mature New Zealand white rabbits (11 males/20 tibias; 4 females/8 tibias; approximate weight 3.5 kg) and one Yucatan miniature pig were used for harvest of periosteum from the tibia using the traditional periosteal elevator and the developed hydraulic elevation approach. Histologic examination of the periosteal explants obtained by the developed method showed preservation of the cambium layer containing the progenitor cells necessary for the generation of neo-cartilage. This technique provides a simple method of harvesting large segments (>5 cm x 1 cm) of periosteum in a single procedure and may facilitate better exploitation of periosteum in tissue engineering.

Animals↗