Biomedical subjects

Mohamed Naceur Belgacem

Publications and source records attributed to Mohamed Naceur Belgacem.

6 recordsLinked to original sources

PubMed2006

Starch nanocrystals with large chain surface modifications.

Nanoscale monocrystalline starch particles were successfully modified using stearic acid chloride and poly(ethylene glycol) methyl ether. Surface modification was confirmed using FTIR, XPS spectroscopy, and contact angle measurements. X-ray diffraction and DSC analysis confirmed that there was no alteration of the starch crystalline structure due to the surface modification. The grafts at the starch surface were also found to crystallize on the surface. TEM showed the individualization of nanoparticles as a result of the reduction of polar and hydrogen bonding forces. These results show our ability to modify the starch nanocrystal surface with plasticizing chains. Modified nanoparticles can find applications as compatibilized polymer additives, surface-active particles, and co-continuous nanocomposite precursors.

Calorimetry, Differential Scanning↗

PubMed2005

Silane adsorption onto cellulose fibers: hydrolysis and condensation reactions.

The hydrolysis of three alkoxysilane coupling agents, gamma-methacryloxypropyltrimethoxysilane (MPS), gamma-aminopropyltriethoxysilane (APS), and gamma-diethylenetriaminopropyltrimethoxysilane (TAS), was carried out in an ethanol/water (80/20) solution and followed by 1H, 13C, and 29Si NMR spectroscopy, which showed that its rate increased in the order MPS < APS < TAS. The formation of the silanol groups was followed by their self-condensation to generate oligomeric structure. APS and MPS only gave soluble products, whereas colloidal particles precipitated in the medium when TAS was hydrolyzed. Pristine and hydrolyzed MPS were then adsorbed onto a cellulose substrate and thereafter a thermal treatment at 110-120 degrees C under reduced pressure was applied to the modified fibers to create permanent bonding of the coupling agent at their surface.

Adsorption↗

PubMed2005

Adsorption of a cationic surfactant onto cellulosic fibers I. Surface charge effects.

The adsorption of four cationic surfactants with different alkyl chain lengths on cellulose substrates was investigated. Cellulose fibers were used as model substrates, and primary alcohol groups of cellulose glycosyl units were oxidized into carboxylic groups to obtain substrates with different surface charges. The amount of surfactant adsorbed on the fiber surface, the fiber zeta-potential, and the amount of surfactant counterions (Cl(-)) released into solution were measured as a function of the surfactant bulk concentration, its molecular structure, the substrate surface charge, and the ionic strength. The contribution of each of these parameters to the shape of the adsorption isotherms was used to verify if surfactant adsorption and self-assembly models usually used to describe the behavior of surfactant/oxide systems can be applied, and with which limitations, to describe cationic surfactant adsorption onto oppositely charged cellulose substrates.

Adsorption↗

PubMed2005

Surface esterification of cellulose fibers: characterization by DRIFT and contact angle measurements.

The surface chemical modification of microcrystalline cellulose and cellulose fibers obtained from different sugar cane bagasse pulping processes, viz. Kraft, organosolv ethanol/water and organosolv/supercritical carbon dioxide, were studied in heterogeneous conditions using modest amounts of octadecanoyl and dodecanoyl chloride. The ensuing surfaces acquired a non-polar character, suitable for incorporating these fibers as reinforcing agents in composite materials based on polymeric matrices. The success of these chemical modifications was assessed by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, elemental analysis, scanning electron microscopy (SEM) and contact angle measurements. In particular, the dynamic and equilibrium contact angle measurements, before and after the treatments, revealed that the value of the polar component (gamma(s)p) of the surface energy had decreased very considerably following the modification.

Cellulose↗

PubMed2005

Surface chemical modification of waxy maize starch nanocrystals.

The surface of waxy maize starch nanocrystals obtained from sulfuric acid hydrolysis of native waxy maize starch granules was chemically modified using two different reagents, namely, alkenyl succinic anhydride and phenyl isocyanate. The occurrence of chemical modification was evaluated by FTIR and X-ray photoelectron spectroscopies. Contact angle measurements from which the surface energy of the materials under investigation was deduced showed that chemical modification led to more hydrophobic particles. Chemical modification altered the morphology of particles, as shown by observation by transmission electron microscopy, but not their crystallinity (X-ray diffraction analysis).

Journal Article↗

PubMedDate not supplied

Crab shell chitin whiskers reinforced natural rubber nanocomposites. 3. Effect of chemical modification of chitin whiskers.

The purpose of this study was to chemically modify the surface of chitin whiskers and to investigate the effect of the incorporation of these modified whiskers into a natural rubber (NR) matrix on the properties of the ensuing nanocomposite. Different chemical coupling agents were tested, namely, phenyl isocyanate (PI), alkenyl succinic anhydride (ASA) (Accosize 18 from American Cyanamid), and 3-isopropenyl-alpha,alpha'-dimethylbenzyl isocyanate (TMI). The extent of chemical modification was evaluated by Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), and surface energy analysis. After chemical modification, nanocomposite films were obtained using a toluene natural rubber solution in which the whiskers were dispersed. Their mechanical properties were found to be inferior to those of unmodified chitin/NR composites presented in our previous study. In fact, even though there is an increase in filler-matrix interaction as a result of chemical modification of the chitin whiskers, this does not contribute to the improvement in the mechanical properties of the resulting nanocomposite. It is concluded that this loss of performance is due to the partial destruction of the three-dimensional network of chitin whiskers assumed to be present in the unmodified composites.

Animals↗