Search PubMed⌕ Search

Biomedical subjects

Mike O'Donnell

Publications and source records attributed to Mike O'Donnell.

49 records · Page 3Linked to original sources

Mechanism of loading the Escherichia coli DNA polymerase III beta sliding clamp on DNA. Bona fide primer/templates preferentially trigger the gamma complex to hydrolyze ATP and load the clamp.

The Escherichia coli DNA polymerase III gamma complex clamp loader assembles the ring-shaped beta sliding clamp onto DNA. The core polymerase is tethered to the template by beta, enabling processive replication of the genome. Here we investigate the DNA substrate specificity of the clamp-loading reaction by measuring the pre-steady-state kinetics of DNA binding and ATP hydrolysis using elongation-proficient and deficient primer/template DNA. The ATP-bound clamp loader binds both elongation-proficient and deficient DNA substrates either in the presence or absence of beta. However, elongation-proficient DNA preferentially triggers gamma complex to release beta onto DNA with concomitant hydrolysis of ATP. Binding to elongation-proficient DNA converts the gamma complex from a high affinity ATP-bound state to an ADP-bound state having a 10(5)-fold lower affinity for DNA. Steady-state binding assays are misleading, suggesting that gamma complex binds much more avidly to non-extendable primer/template DNA because recycling to the high affinity binding state is rate-limiting. Pre-steady-state rotational anisotropy data reveal a dynamic association-dissociation of gamma complex with extendable primer/templates leading to the diametrically opposite conclusion. The strongly favored dynamic recognition of extendable DNA does not require the presence of beta. Thus, the gamma complex uses ATP binding and hydrolysis as a mechanism for modulating its interaction with DNA in which the ATP-bound form binds with high affinity to DNA but elongation-proficient DNA substrates preferentially trigger hydrolysis of ATP and conversion to a low affinity state.

Adenosine Triphosphate↗

Nucleotide-induced conformational changes in an isolated Escherichia coli DNA polymerase III clamp loader subunit.

Sliding clamps are loaded onto DNA by ATP-driven clamp loader complexes. The structure of the E. coli clamp loader in a nucleotide-free state has been determined previously. We now report crystal structures of a truncated form of the isolated gamma-ATPase subunit, gamma(1-243), of the E. coli clamp loader, in nucleotide-free and bound forms. The gamma subunit adopts a defined conformation when empty, in which the nucleotide binding site is blocked. The binding of either ATPgammaS or ADP, which are shown to bind with equal affinity to gamma(1-243), induces a change in the relative orientation of the two domains such that nucleotides can be accommodated. This change would break one of the gamma:gamma interfaces seen in the empty clamp loader complex, and may represent one step in the activation process.

Adenosine Triphosphatases↗

Mechanism of the E. coli tau processivity switch during lagging-strand synthesis.

The E. coli replication machinery employs a beta clamp that tethers the polymerase to DNA, thus ensuring high processivity. The replicase also contains a processivity switch that dissociates the polymerase from its beta clamp. The switch requires the tau subunit of the clamp loader and is regulated by different DNA structures. At a primed site, the switch is "off." When the replicase reaches the downstream primer to form a nick, the switch is flipped, and tau ejects the polymerase from beta. This switch has high fidelity for completed synthesis, remaining "off" until just prior to incorporation of the last nucleotide and turning "on" only after addition of the last dNTP. These actions of tau are confined to its C-terminal region, which is located outside the clamp loading apparatus. Thus, this highly processive replication machine has evolved a mechanism to specifically counteract processivity at a defined time in the lagging-strand cycle.

Amino Acid Sequence↗

Reconstitution of the Mcm2-7p heterohexamer, subunit arrangement, and ATP site architecture.

The Mcm2-7p heterohexamer is the presumed replicative helicase in eukaryotic cells. Each of the six subunits is required for replication. We have purified the six Saccharomyces cerevisiae MCM proteins as recombinant proteins in Escherichia coli and have reconstituted the Mcm2-7p complex from individual subunits. Study of MCM ATPase activity demonstrates that no MCM protein hydrolyzes ATP efficiently. ATP hydrolysis requires a combination of two MCM proteins. The fifteen possible pairwise mixtures of MCM proteins yield only three pairs of MCM proteins that produce ATPase activity. Study of the Mcm3/7p ATPase shows that an essential arginine in Mcm3p is required for hydrolysis of the ATP bound to Mcm7p. Study of the pairwise interactions between MCM proteins connects the remaining MCM proteins to the Mcm3/7p pair. The data predict which subunits in the ATPase pairs bind the ATP that is hydrolyzed and indicate the arrangement of subunits in the Mcm2-7p heterohexamer.

Amino Acid Sequence↗

Cultured gill epithelia as models for the freshwater fish gill.

We review recent progress in the development of models for the freshwater teleost gill based on reconstructed flat epithelia grown on permeable filter supports in primary culture. Methods are available for single-seeded insert (SSI) preparations consisting of pavement cells (PVCs) only from trout and tilapia, and double-seeded insert (DSI) preparations from trout, containing both PVCs (85%) and mitochondria-rich cells (MRCs, 15%), as in the intact gill. While there are some quantitative differences, both SSI and DSI epithelia manifest electrical and passive permeability characteristics typical of intact gills and representative of very tight epithelia. Both preparations withstand apical freshwater exposure, exhibiting large increases in transepithelial resistance (TER), negative transepithelial potential (TEP), and low rates of ion loss, but there is only a small active apical-to-basolateral "influx" of Cl(-) (and not of Na(+)). Responses to various hormonal treatments are described (thyroid hormone T3, prolactin, and cortisol). Cortisol has the most marked effects, stimulating Na(+),K(+)-ATPase activity and promoting active Na(+) and Cl(-) influxes in DSI preparations, and raising TER and reducing passive ion effluxes in both epithelia via reductions in paracellular permeability. Experiments using DSI epithelia lacking Na(+) uptake demonstrate that both NH(3) and NH(4)(+) diffusion occur, but are not large enough to account for normal rates of branchial ammonia excretion, suggesting that Na(+)-linked carrier-mediated processes are important for ammonia excretion in vivo. Future research goals are suggested.

Adaptation, Physiological↗

Fidelity of Escherichia coli DNA polymerase IV. Preferential generation of small deletion mutations by dNTP-stabilized misalignment.

Escherichia coli DNA polymerase IV (pol IV), a member of the error-prone Y family, predominantly generates -1 frameshifts when copying DNA in vitro. T-->G transversions and T-->C transitions are the most frequent base substitutions observed. The in vitro data agree with mutational spectra obtained when pol IV is overexpressed in vivo. Single base deletion and base substitution rates measured in the lacZalpha gene in vitro are, on average, 2 x 10(-4) and 5 x 10(-5), respectively. The range of misincorporation and mismatch extension efficiencies determined kinetically are 10(-3) to 10(-5). The presence of beta sliding clamp and gamma-complex clamp loading proteins strongly enhance pol IV processivity but have no discernible influence on fidelity. By analyzing changes in fluorescence of a 2-aminopurine template base undergoing replication in real time, we show that a "dNTP-stabilized" misalignment mechanism is responsible for making -1 frameshift mutations on undamaged DNA. In this mechanism, a dNTP substrate is paired "correctly" opposite a downstream template base, on a "looped out" template strand instead of mispairing opposite a next available template base. By using the same mechanism, pol IV "skips" past an abasic template lesion to generate a -1 frameshift. A crystal structure depicting dNTP-stabilized misalignment was reported recently for Sulfolubus solfataricus Dpo4, a Y family homolog of Escherichia coli pol IV.

Base Pair Mismatch↗

The DnaC helicase loader is a dual ATP/ADP switch protein.

Helicases are transferred to replication origins by helicase loading factors. The Escherichia coli DnaC and eukaryotic Cdc6/18 helicase loaders contain ATP sites and are both members of the AAA+ family. One might expect that ATP is required for helicase loading; however, this study on DnaC illustrates that ATP is not actually needed for DnaC to load helicase onto single-strand DNA (ssDNA). In fact, it seems to be a paradox that after transfer of helicase to DNA, DnaC-ATP inhibits helicase action. In addition, ATP is required for DnaC function at an early step in oriC replication in which ATP stimulates ssDNA binding by DnaC, leading to expansion of the ssDNA bubble at the origin. Two cofactors, ssDNA and DnaB, trigger hydrolysis of ATP, converting DnaC to the ADP form that no longer inhibits DnaB. These observations have led to the idea that DnaC is a 'dual' switch protein, where both the ATP and the ADP forms are sequentially required for replication. This dual switching process may underlie the sensitivity of DnaB to even small fluctuations in DnaC levels.

Adenosine Diphosphate↗

Analysis of a multicomponent thermostable DNA polymerase III replicase from an extreme thermophile.

This report takes a proteomic/genomic approach to characterize the DNA polymerase III replication apparatus of the extreme thermophile, Aquifex aeolicus. Genes (dnaX, holA, and holB) encoding the subunits required for clamp loading activity (tau, delta, and delta') were identified. The dnaX gene produces only the full-length product, tau, and therefore differs from Escherichia coli dnaX that produces two proteins (gamma and tau). Nonetheless, the A. aeolicus proteins form a taudeltadelta' complex. The dnaN gene encoding the beta clamp was identified, and the taudeltadelta' complex is active in loading beta onto DNA. A. aeolicus contains one dnaE homologue, encoding the alpha subunit of DNA polymerase III. Like E. coli, A. aeolicus alpha and tau interact, although the interaction is not as tight as the alpha-tau contact in E. coli. In addition, the A. aeolicus homologue to dnaQ, encoding the epsilon proofreading 3'-5'-exonuclease, interacts with alpha but does not form a stable alpha.epsilon complex, suggesting a need for a brace or bridging protein to tightly couple the polymerase and exonuclease in this system. Despite these differences to the E. coli system, the A. aeolicus proteins function to yield a robust replicase that retains significant activity at 90 degrees C. Similarities and differences between the A. aeolicus and E. coli pol III systems are discussed, as is application of thermostable pol III to biotechnology.

Amino Acid Sequence↗

Clamp loaders and sliding clamps.

A coherent view of the structure and function of DNA polymerase processivity factors (sliding clamps and clamp loaders) is emerging from recent structural studies. Crystal structures of sliding clamps from the T4 and RB69 bacteriophages, and from an archaebacterium expand the gallery of ring-shaped processivity factors and clarify how the clamp interacts with the DNA polymerase. Crystallographic and electron microscopic views of clamp loaders from bacteria, archaebacteria and eukaryotes emphasize their common architecture and have produced models of how ATPbinding might be coupled to clamp opening/loading.

Adenosine Triphosphate↗

DnaB drives DNA branch migration and dislodges proteins while encircling two DNA strands.

DnaB is a ring-shaped, hexameric helicase that unwinds the E. coli DNA replication fork while encircling one DNA strand. This report demonstrates that DnaB can also encircle both DNA strands and then actively translocate along the duplex. With two strands positioned inside its central channel, DnaB translocates with sufficient force to displace proteins tightly bound to DNA with no resultant DNA unwinding. Thus, DnaB may clear proteins from chromosomal DNA. Furthermore, while encircling two DNA strands, DnaB can drive branch migration of a synthetic Holliday junction with heterologous duplex arms, suggesting that DnaB may be directly involved in DNA recombination in vivo. DnaB binds to just one DNA strand during branch migration. T7 phage gp4 protein also drives DNA branch migration, suggesting this activity generalizes to other ring-shaped helicases.

Adenosine Triphosphatases↗

Motors and switches: AAA+ machines within the replisome.

Clamp loaders are required to load the ring-shaped clamps that tether replicative DNA polymerases onto DNA. Recently solved crystal structures, along with a series of biochemical studies, have provided a detailed understanding of the clamp loading reaction. In particular, studies of the Escherichia coli clamp loader--an AAA+ machine--have provided insights into the architecture of clamp loaders from eukaryotes, bacteriophage T4 and archaea. Other AAA+ proteins are also involved in the initiation of DNA replication, and studies of the E. coli clamp loader indicate mechanisms by which these proteins might function.

Archaea↗

Efficiency and accuracy of SOS-induced DNA polymerases replicating benzo[a]pyrene-7,8-diol 9,10-epoxide A and G adducts.

Nucleotide incorporation fidelity, mismatch extension, and translesion DNA synthesis efficiencies were determined using SOS-induced Escherichia coli DNA polymerases (pol) II, IV, and V to copy 10R and 10S isomers of trans-opened benzo[a]pyrene-7,8-diol 9,10-epoxide (BaP DE) A and G adducts. A-BaP DE adducts were bypassed by pol V with moderate accuracy and considerably higher efficiency than by pol II or IV. Error-prone pol V copied G-BaP DE-adducted DNA poorly, forming A*G-BaP DE-S and -R mismatches over C*G-BaP DE-S and -R correct matches by factors of approximately 350- and 130-fold, respectively, even favoring G*G-BaP DE mismatches over correct matches by factors of 2-4-fold. In contrast, pol IV bypassed G-BaP DE adducts with the highest efficiency and fidelity, making misincorporations with a frequency of 10(-2) to 10(-4) depending on sequence context. G-BaP DE-S-adducted M13 DNA yielded 4-fold fewer plaques when transfected into SOS-induced DeltadinB (pol IV-deficient) mutant cells compared with the isogenic wild-type E. coli strain, consistent with the in vitro data showing that pol IV was most effective by far at copying the G-BaP DE-S adduct. SOS polymerases are adept at copying a variety of lesions, but the relative contribution of each SOS polymerase to copying damaged DNA appears to be determined by the lesion's identity.

7,8-Dihydro-7,8-dihydroxybenzo(a)pyrene 9,10-oxide↗

Resolving a fidelity paradox: why Escherichia coli DNA polymerase II makes more base substitution errors in AT- compared with GC-rich DNA.

The activity of DNA polymerase-associated proofreading 3'-exonucleases is generally enhanced in less stable DNA regions leading to a reduction in base substitution error frequencies in AT- versus GC-rich sequences. Unexpectedly, however, the opposite result was found for Escherichia coli DNA polymerase II (pol II). Nucleotide misincorporation frequencies for pol II were found to be 3-5-fold higher in AT- compared with GC-rich DNA, both in the presence and absence of polymerase processivity subunits, beta dimer and gamma complex. In contrast, E. coli pol III holoenzyme, behaving "as expected," exhibited 3-5-fold lower misincorporation frequencies in AT-rich DNA. A reduction in fidelity in AT-rich regions occurred for pol II despite having an associated 3'-exonuclease proofreading activity that preferentially degrades AT-rich compared with GC-rich DNA primer-template in the absence of DNA synthesis. Concomitant with a reduction in fidelity, pol II polymerization efficiencies were 2-6-fold higher in AT-rich DNA, depending on sequence context. Pol II paradoxical fidelity behavior can be accounted for by the enzyme's preference for forward polymerization in AT-rich sequences. The more efficient polymerization suppresses proofreading thereby causing a significant increase in base substitution error rates in AT-rich regions.

Base Sequence↗