Search PubMed⌕ Search

Biomedical subjects

Mike O'Donnell

Publications and source records attributed to Mike O'Donnell.

At least 19 recordsLinked to original sources
PubMed2006

The replication factor C clamp loader requires arginine finger sensors to drive DNA binding and proliferating cell nuclear antigen loading.

Replication factor C (RFC) is an AAA+ heteropentamer that couples the energy of ATP binding and hydrolysis to the loading of the DNA polymerase processivity clamp, proliferating cell nuclear antigen (PCNA), onto DNA. RFC consists of five subunits in a spiral arrangement (RFC-A, -B, -C, -D, and -E, corresponding to subunits RFC1, RFC4, RFC3, RFC2, and RFC5, respectively). The RFC subunits are AAA+ family proteins and the complex contains four ATP sites (sites A, B, C, and D) located at subunit interfaces. In each ATP site, an arginine residue from one subunit is located near the gamma-phosphate of ATP bound in the adjacent subunit. These arginines act as "arginine fingers" that can potentially perform two functions: sensing that ATP is bound and catalyzing ATP hydrolysis. In this study, the arginine fingers in RFC were mutated to examine the steps in the PCNA loading mechanism that occur after RFC binds ATP. This report finds that the ATP sites of RFC function in distinct steps during loading of PCNA onto DNA. ATP binding to RFC powers recruitment and opening of PCNA and activates a gamma-phosphate sensor in ATP site C that promotes DNA association. ATP hydrolysis in site D is uniquely stimulated by PCNA, and we propose that this event is coupled to PCNA closure around DNA, which starts an ordered hydrolysis around the ring. PCNA closure severs contact to RFC subunits D and E (RFC2 and RFC5), and the gamma-phosphate sensor of ATP site C is switched off, resulting in low affinity of RFC for DNA and ejection of RFC from the site of PCNA loading.

Adenosine Triphosphate↗
PubMed2006

Crystal structure of the catalytic alpha subunit of E. coli replicative DNA polymerase III.

Bacterial replicative DNA polymerases such as Polymerase III (Pol III) share no sequence similarity with other polymerases. The crystal structure, determined at 2.3 A resolution, of a large fragment of Pol III (residues 1-917), reveals a unique chain fold with localized similarity in the catalytic domain to DNA polymerase beta and related nucleotidyltransferases. The structure of Pol III is strikingly different from those of members of the canonical DNA polymerase families, which include eukaryotic replicative polymerases, suggesting that the DNA replication machinery in bacteria arose independently. A structural element near the active site in Pol III that is not present in nucleotidyltransferases but which resembles an element at the active sites of some canonical DNA polymerases suggests that, at a more distant level, all DNA polymerases may share a common ancestor. The structure also suggests a model for interaction of Pol III with the sliding clamp and DNA.

Bacterial Proteins↗
PubMed2006

The replication clamp-loading machine at work in the three domains of life.

Sliding clamps are ring-shaped proteins that tether DNA polymerases to DNA, which enables the rapid and processive synthesis of both leading and lagging strands at the replication fork. The clamp-loading machinery must repeatedly load sliding-clamp factors onto primed sites at the replication fork. Recent structural and biochemical analyses provide unique insights into how these clamp-loading ATPase machines function to load clamps onto the DNA. Moreover, these studies highlight the evolutionary conservation of the clamp-loading process in the three domains of life.

Adenosine Triphosphatases↗
PubMed2006

DNA replication: keep moving and don't mind the gap.

As the replication fork progresses, synthesis of the discontinuous lagging strand requires frequent priming and cycling of the lagging strand polymerase to the new primers. It appears that this mechanism also permits bypass of template lesions on both strands, leaving the damage behind in a single-strand gap and precluding fork stalling or collapse.

DNA Replication↗
PubMed2006

Mechanism of proliferating cell nuclear antigen clamp opening by replication factor C.

The eukaryotic replication factor C (RFC) clamp loader is an AAA+ spiral-shaped heteropentamer that opens and closes the circular proliferating cell nuclear antigen (PCNA) clamp processivity factor on DNA. In this study, we examined the roles of individual RFC subunits in opening the PCNA clamp. Interestingly, Rfc1, which occupies the position analogous to the delta clamp-opening subunit in the Escherichia coli clamp loader, is not required to open PCNA. The Rfc5 subunit is required to open PCNA. Consistent with this result, Rfc2.3.4.5 and Rfc2.5 subassemblies are capable of opening and unloading PCNA from circular DNA. Rfc5 is positioned opposite the PCNA interface from Rfc1, and therefore, its action with Rfc2 in opening PCNA indicates that PCNA is opened from the opposite side of the interface that the E. coli delta wrench acts upon. This marks a significant departure in the mechanism of eukaryotic and prokaryotic clamp loaders. Interestingly, the Rad.RFC DNA damage checkpoint clamp loader unloads PCNA clamps from DNA. We propose that Rad.RFC may clear PCNA from DNA to facilitate shutdown of replication in the face of DNA damage.

Chromatography, Gel↗
PubMed2006

The beta sliding clamp binds to multiple sites within MutL and MutS.

The MutL and MutS proteins are the central components of the DNA repair machinery that corrects mismatches generated by DNA polymerases during synthesis. We find that MutL interacts directly with the beta sliding clamp, a ring-shaped dimeric protein that confers processivity to DNA polymerases by tethering them to their substrates. Interestingly, the interaction of MutL with beta only occurs in the presence of single-stranded DNA. We find that the interaction occurs via a loop in MutL near the ATP-binding site. The binding site of MutL on beta locates to the hydrophobic pocket between domains two and three of the clamp. Site-specific replacement of two residues in MutL diminished interaction with beta without disrupting MutL function with helicase II. In vivo studies reveal that this mutant MutL is no longer functional in mismatch repair. In addition, the human MLH1 has a close match to the proliferating cell nuclear antigen clamp binding motif in the region that corresponds to the beta interaction site in Escherichia coli MutL, and a peptide corresponding to this site binds proliferating cell nuclear antigen. The current report also examines in detail the interaction of beta with MutS. We find that two distinct regions of MutS interact with beta. One is located near the C terminus and the other is close to the N terminus, within the mismatch binding domain. Complementation studies using genes encoding different MutS mutants reveal that the N-terminal beta interaction motif on MutS is essential for activity in vivo, but the C-terminal interaction site for beta is not. In light of these results, we propose roles for the beta clamp in orchestrating the sequence of events that lead to mismatch repair in the cell.

Adaptor Proteins, Signal Transducing↗
PubMed2006

Clamp loaders and replication initiation.

Clamp loaders are ATP-driven multiprotein machines that couple ATP hydrolysis to the opening and closing of a circular protein ring around DNA. This ring-shaped clamp slides along DNA, and interacts with numerous proteins involved in DNA replication, DNA repair and cell cycle control. Recently determined structures of clamp loader complexes from prokaryotic and eukaryotic sources have revealed exciting new details of how these complex AAA+ machines perform this essential clamp loading function.

Adenosine Triphosphate↗
PubMed2006

Crystal structure of a DNA polymerase sliding clamp from a Gram-positive bacterium.

BACKGROUND: Sliding DNA clamps are processivity factors that are required for efficient DNA replication. DNA polymerases maintain proximity to nucleic acid templates by interacting with sliding clamps that encircle DNA and thereby link the polymerase enzyme to the DNA substrate. Although the structures of sliding clamps from Gram-negative bacteria (E. coli), eukaryotes, archaea, and T4-like bacteriophages are well-known, the structure of a sliding clamp from Gram-positive bacteria has not been reported previously. RESULTS: We have determined the crystal structure of the dimeric beta subunit of the DNA polymerase III holoenzyme of Streptococcus pyogenes. The sliding clamp from this Gram-positive organism forms a ring-shaped dimeric assembly that is similar in overall structure to that of the sliding clamps from Gram-negative bacteria, bacteriophage T4, eukaryotes and archaea. The dimer has overall dimensions of approximately 90 A x approximately 70 A x approximately 25 A with a central chamber that is large enough to accommodate duplex DNA. In comparison to the circular shape of other assemblies, the S. pyogenes clamp adopts a more elliptical structure. CONCLUSION: The sequences of sliding clamps from S. pyogenes and E. coli are only 23% identical, making the generation of structural models for the S. pyogenes clamp difficult in the absence of direct experimental information. Our structure of the S. pyogenes beta subunit completes the catalog of clamp structures from all the major sequence grouping of sliding clamps. The more elliptical rather than circular structure of the S. pyogenes clamp implies that the topological nature of encircling DNA, rather than a precise geometric shape, is the most conserved aspect for this family of proteins.

Amino Acid Sequence↗
PubMed2005

RuvA is a sliding collar that protects Holliday junctions from unwinding while promoting branch migration.

The RuvAB proteins catalyze branch migration of Holliday junctions during DNA recombination in Escherichia coli. RuvA binds tightly to the Holliday junction, and then recruits two RuvB pumps to power branch migration. Previous investigations have studied RuvA in conjunction with its cellular partner RuvB. The replication fork helicase DnaB catalyzes branch migration like RuvB but, unlike RuvB, is not dependent on RuvA for activity. In this study, we specifically analyze the function of RuvA by studying RuvA in conjunction with DnaB, a DNA pump that does not work with RuvA in the cell. Thus, we use DnaB as a tool to dissect RuvA function from RuvB. We find that RuvA does not inhibit DnaB-catalyzed branch migration of a homologous junction, even at high concentrations of RuvA. Hence, specific protein-protein interaction is not required for RuvA mobilization during branch migration, in contrast to previous proposals. However, low concentrations of RuvA block DnaB unwinding at a Holliday junction. RuvA even blocks DnaB-catalyzed unwinding when two DnaB rings are acting in concert on opposite sides of the junction. These findings indicate that RuvA is intrinsically mobile at a Holliday junction when the DNA is undergoing branch migration, but RuvA is immobile at the same junction during DNA unwinding. We present evidence that suggests that RuvA can slide along a Holliday junction structure during DnaB-catalyzed branch migration, but not during unwinding. Thus, RuvA may act as a sliding collar at Holliday junctions, promoting DNA branch migration activity while blocking other DNA remodeling activities. Finally, we show that RuvA is less mobile at a heterologous junction compared to a homologous junction, as two opposing DnaB pumps are required to mobilize RuvA over heterologous DNA.

Adenosine Triphosphatases↗
PubMed2005

A sliding-clamp toolbelt binds high- and low-fidelity DNA polymerases simultaneously.

This report demonstrates that the beta sliding clamp of E. coli binds two different DNA polymerases at the same time. One is the high-fidelity Pol III chromosomal replicase and the other is Pol IV, a low-fidelity lesion bypass Y family polymerase. Further, polymerase switching on the primed template junction is regulated in a fashion that limits the action of the low-fidelity Pol IV. Under conditions that cause Pol III to stall on DNA, Pol IV takes control of the primed template. After the stall is relieved, Pol III rapidly regains control of the primed template junction from Pol IV and retains it while it is moving, becoming resistant to further Pol IV takeover events. These polymerase dynamics within the beta toolbelt complex restrict the action of the error-prone Pol IV to only the area on DNA where it is required.

DNA Polymerase III↗
PubMed2005

DNA ligase: getting a grip to seal the deal.

The crystal structure of human DNA ligase I catches the enzyme just before the last step of ligation and shows that the protein wraps completely around nicked DNA. The elegant structure explains how ligase attains fidelity for the sealing operation.

DNA Ligase ATP↗
PubMed2005

DNA polymerase clamp loaders and DNA recognition.

Clamp loaders are heteropentameric ATPase assemblies that load sliding clamps onto DNA and are critical for processive DNA replication. The DNA targets for clamp loading are double-stranded/single-stranded junctions with recessed 3' ends (primer-template junctions). Here, we briefly review the crystal structures of clamp loader complexes and the insights they have provided into the mechanism of the clamp loading process.

Adenosine Triphosphatases↗
PubMed2005

Mapping the interaction of DNA with the Escherichia coli DNA polymerase clamp loader complex.

Sliding clamps are loaded onto DNA by ATP-dependent clamp loader complexes. A recent crystal structure of a clamp loader-clamp complex suggested an unexpected mechanism for DNA recognition, in which the ATPase subunits of the loader spiral around primed DNA. We report the results of fluorescence-based assays that probe the mechanism of the Escherichia coli clamp loader and show that conserved residues clustered within the inner surface of the modeled clamp loader spiral are critical for DNA recognition, DNA-dependent ATPase activity and clamp release. Duplex DNA with a 5'-overhang single-stranded region (corresponding to correctly primed DNA) stimulates clamp release, as does blunt-ended duplex DNA, whereas duplex DNA with a 3' overhang and single-stranded DNA are ineffective. These results provide evidence for the recognition of DNA within an inner chamber formed by the spiral organization of the ATPase domains of the clamp loader.

Base Sequence↗
PubMed2005

Conserved interactions in the Staphylococcus aureus DNA PolC chromosome replication machine.

The PolC holoenzyme replicase of the Gram-positive Staphylococcus aureus pathogen has been reconstituted from pure subunits. We compared individual S. aureus replicase subunits with subunits from the Gram-negative Escherichia coli polymerase III holoenzyme for activity and interchangeability. The central organizing subunit, tau, is smaller than its Gram-negative homolog, yet retains the ability to bind single-stranded DNA and contains DNA-stimulated ATPase activity comparable with E. coli tau. S. aureus tau also stimulates PolC, although they do not form as stabile a complex as E. coli polymerase III.tau. We demonstrate that the extreme C-terminal residues of PolC bind to and function with beta clamps from different bacteria. Hence, this polymerase-clamp interaction is highly conserved. Additionally, the S. aureus delta wrench of the clamp loader binds to E. coli beta. The S. aureus clamp loader is even capable of loading E. coli and Streptococcus pyogenes beta clamps onto DNA. Interestingly, S. aureus PolC lacks functionality with heterologous beta clamps when they are loaded onto DNA by the S. aureus clamp loader, suggesting that the S. aureus clamp loader may have difficulty ejecting from heterologous clamps. Nevertheless, these overall findings underscore the conservation in structure and function of Gram-positive and Gram-negative replicases despite >1 billion years of evolutionary distance between them.

Bacterial Proteins↗
PubMed2005

Cellular DNA replicases: components and dynamics at the replication fork.

DNA replicases are multicomponent machines that have evolved clever strategies to perform their function. Although the structure of DNA is elegant in its simplicity, the job of duplicating it is far from simple. At the heart of the replicase machinery is a heteropentameric AAA+ clamp-loading machine that couples ATP hydrolysis to load circular clamp proteins onto DNA. The clamps encircle DNA and hold polymerases to the template for processive action. Clamp-loader and sliding clamp structures have been solved in both prokaryotic and eukaryotic systems. The heteropentameric clamp loaders are circular oligomers, reflecting the circular shape of their respective clamp substrates. Clamps and clamp loaders also function in other DNA metabolic processes, including repair, checkpoint mechanisms, and cell cycle progression. Twin polymerases and clamps coordinate their actions with a clamp loader and yet other proteins to form a replisome machine that advances the replication fork.

DNA Replication↗
PubMed2004

Structural analysis of the inactive state of the Escherichia coli DNA polymerase clamp-loader complex.

Clamp-loader complexes are heteropentameric AAA+ ATPases that load sliding clamps onto DNA. The structure of the nucleotide-free Escherichia coli clamp loader had been determined previously and led to the proposal that the clamp-loader cycles between an inactive state, in which the ATPase domains form a closed ring, and an active state that opens up to form a "C" shape. The crystal structure was interpreted as being closer to the active state than the inactive state. The crystal structure of a nucleotide-bound eukaryotic clamp loader [replication factor C (RFC)] revealed a different and more tightly packed spiral organization of the ATPase domains, raising questions about the significance of the conformation seen earlier for the bacterial clamp loader. We describe crystal structures of the E. coli clamp-loader complex bound to the ATP analog ATPgammaS (at a resolution of 3.5 A) and ADP (at a resolution of 4.1 A). These structures are similar to that of the nucleotide-free clamp-loader complex. Only two of the three functional ATP-binding sites are occupied by ATPgammaS or ADP in these structures, and the bound nucleotides make no interfacial contacts in the complex. These results, along with data from isothermal titration calorimetry, molecular dynamics simulations, and comparison with the RFC structure, suggest that the more open form of the E. coli clamp loader described earlier and in the present work corresponds to a stable inactive state of the clamp loader in which the ATPase domains are prevented from engaging the clamp in the highly cooperative manner seen in the fully ATP-loaded RFC-clamp structure.

Adenosine Diphosphate↗