Biomedical subjects

Michael J McFarland

Publications and source records attributed to Michael J McFarland.

11 recordsLinked to original sources

PubMed2006

Field verification of sound attenuation modeling and air emission testing in support of missile motor disposal activities.

The U.S. Department of Defense-approved activities conducted at the Utah Test and Training Range (UTTR) include both operational readiness test firing of intercontinental ballistic missile (ICBM) motors, as well as the destruction of obsolete or otherwise unusable ICBM motors through open burn/open detonation (OB/OD). Within the Utah Division of Air Quality, these activities have been identified as having the potential to generate unacceptable noise levels, as well as significant amounts of volatile organic compounds (VOCs). Hill Air Force Base, UT, has completed a series of field tests at the UTTR in which sound-monitoring surveillance of OB/OD activities was conducted to validate the Sound Intensity Prediction System (SIPS) model. Using results generated by the SIPS model to support the decision to detonate, the UTTR successfully disposed of missile motors having an aggregate net explosive weight (NEW) of 81,374 lb without generating adverse noise levels within populated areas. In conjunction with collecting noise-monitoring data, air emissions were collected to support the development of air emission factors for both static missile motor firings and OB/OD activities. Through the installation of 15 ground-based air samplers, the generation of combustion-fixed gases, VOCs, and chlorides was monitored during the 81,374-lb NEW detonation event. Comparison of field measurements to predictions generated from the US Navy energetic combustion pollutant formation model, POLU4WN, indicated that, as the detonation fire ball expanded, organic compounds, as well as CO, continued to oxidize as the combustion gases mixed with ambient air. VOC analysis of air samplers confirmed the presence of chloromethane, vinyl chloride, benzene, toluene, and 2-methyl-1-propene. Qualitative chloride analysis indicated that gaseous HCl was generated at low concentrations, if at all.

Air Pollutants↗

PubMed2006

Validation of the digital opacity compliance system under regulatory enforcement conditions.

U.S. Environmental Protection Agency (EPA) Emission Measurement Center in conjunction with EPA Regions VI and VIII, the state of Utah, and the U.S. Department of Defense have conducted a series of long-term pilot and field tests to determine the accuracy and reliability of a visible opacity monitoring system consisting of a conventional digital camera and a separate computer software application for plume opacity determination. This technology, known as the Digital Opacity Compliance System (DOCS), has been successfully demonstrated at EPA-sponsored Method-9 "smoke schools", as well as at a number of government and commercially operated industrial facilities. Results from the current DOCS regulatory pilot study demonstrated that, under regulatory enforcement conditions, the average difference in opacity measurement between the DOCS technology and EPA Reference Method 9 (Method 9) was 1.12%. This opacity difference, which was computed from the evaluation of 241 regulated air sources, was found to be statistically significant at the 99% confidence level. In evaluating only those sources for which a nonzero visible opacity level was recorded, the

Air Pollutants↗

PubMed2005

Wafer-scale periodic nanohole arrays templated from two-dimensional nonclose-packed colloidal crystals.

This communication reports a simple yet versatile nonlithographic approach for fabricating wafer-scale periodic nanohole arrays from a large variety of functional materials, including metals, semiconductors, and dielectrics. Spin-coated two-dimensional (2D) nonclose-packed colloidal crystals are used as first-generation shadow masks during physical vapor deposition to produce isolated nanohole arrays. These regular nanoholes can then be used as second-generation etching masks to create submicrometer void arrays in the substrates underneath. Complex patterns with micrometer-scale resolution can be made by standard microfabrication techniques for potential device applications. These 2D-ordered nanohole arrays may find important technological applications ranging from subwavelength optics to interferometric biosensors.

Biosensing Techniques↗

PubMed2005

Complying with Executive Order 13148 using the Enterprise Environmental Safety And Occupational Health Management Information System.

All U.S. Department of Defense (DoD) facilities are required under Executive Order (EO) 13148, "Greening the Government through Leadership in Environmental Management," to establish quality-based environmental management systems (EMSs) that support environmental decision-making and verification of continuous environmental improvement by December 31, 2005. Compliance with EO 13148 as well as other federal, state, and local environmental regulations places a significant information management burden on DoD facilities. Cost-effective management of environmental data compels DoD facilities to establish robust database systems that not only address the complex and multifaceted environmental monitoring, record-keeping, and reporting requirements demanded by these rules but enable environmental management decision-makers to gauge improvements in environmental performance. The Enterprise Environmental Safety and Occupational Health Management Information System (EESOH-MIS) is a new electronic database developed by the U.S. Air Force to manage both the data needs associated with regulatory compliance programs across its facilities as well as the non-regulatory environmental information that supports installation business practices. The U.S. Air Force, which has adopted the Plan-Do-Check-Act methodology as the EMS standard that it will employ to address EO 13148 requirements.

Decision Making↗

PubMed2005

Field validation of sound mitigation models and air pollutant emission testing in support of missile motor disposal activities.

The U.S. Department of Defense approved activities conducted at the Utah Test and Training Range (UTTR) include both operational readiness test firing of intercontinental ballistic missile motors as well as the destruction of obsolete or otherwise unusable intercontinental ballistic missile motors through open burn/open detonation (OB/ OD). Within the Utah Division of Air Quality, these activities have been identified as having the potential to generate unacceptable noise levels, as well as significant amounts of hazardous air pollutants. Hill Air Force Base, UT, has completed a series of field tests at the UTTR in which sound-monitoring surveillance of OB/OD activities was conducted to validate the Sound Intensity Prediction System (SIPS) model. Using results generated by the SIPS model to support the decision to detonate, the UTTR successfully disposed of missile motors having an aggregate net explosive weight (NEW) of 56,500 lbs without generating adverse noise levels within populated areas. These results suggest that, under appropriate conditions, missile motors of even larger NEW may be detonated without exceeding regulatory noise limits. In conjunction with collecting noise monitoring data, air quality data was collected to support the development of air emission factors for both static missile motor firings and OB/OD activities. Through the installation of 15 ground-based air samplers, the generation of combustion fixed gases, hazardous air pollutants, and chlorides were monitored during the 56,500-lb NEW detonation event. Comparison of field measurements to predictions generated from the U.S. Navy's energetic combustion pollutant formation model, POLU4WN, indicated that, as the detonation fireball expanded from ground zero, organic compounds as well as carbon monoxide continued to oxidize as the hot gases reacted with ambient air. Hazardous air pollutant analysis of air samplers confirmed the presence of chloromethane, benzene, toluene, 1,2-propadiene, and 2-methyl-l-propene, whereas the absence of hydrogen chloride gas suggested that free chlorine is not generated during the combustion process.

Air Pollutants↗

PubMed2005

Maintaining high-volume, low-pressure surface-coating regulatory compliance using the U.s. Environmental Protection Agency's data quality objectives process.

To effectively reduce the environmental compliance costs associated with meeting specific requirements under the Aerospace Manufacturing and Rework Facility's National Emission Standard for Hazardous Air Pollutants rule, the U.S. Environmental Protection Agency's (EPA) Data Quality Objective (DQO) process has been proposed as a suitable framework for developing a scientifically defensible surface compliance monitoring program. By estimating the variability associated with the air cap pressure of high- volume, low-pressure (HVLP) surface-coating spray equipment, the number of monitoring samples necessary for an affected facility to claim compliance with a desired statistical confidence level was established. Using data taken from the pilot test facility, the DQO process indicated that the mean of at least 21 HVLP air cap pressure samples taken over the compliance period must be < or = 10 pounds per square inch (psig) gauge for the facility to claim regulatory compliance with 99.99% statistical confidence. Fewer compliance samples could be taken, but that decision would lead to a commensurate reduction in the compliance confidence level. Implementation of the DQO-based compliance sampling plan eliminates the need for an affected facility to sample all regulated HVLP surface-coating processes while still maintaining a high level of compliance assurance.

Air Pollution↗

PubMed2004

Large-scale fabrication of wafer-size colloidal crystals, macroporous polymers and nanocomposites by spin-coating.

This paper reports a simple spin-coating technique for rapidly fabricating three types of technologically important materials--colloidal crystal, macroporous polymer, and polymeric nanocomposite, each with high crystalline qualities and wafer-scale sizes. Dispersion of monodisperse silica colloids in triacrylate monomers is spin-coated onto a variety of substrates. Shear-induced ordering and subsequent polymerization lead to the formation of three-dimensionally (3D) ordered colloidal crystals trapped inside a polymer matrix. The thickness of as-synthesized colloidal crystal-polymer nanocomposite is highly uniform and can be controlled simply by changing the spin speed and time. Selective removal of the polymer matrix and silica spheres lead to the formation of large-area colloidal crystals and macroporous polymers, respectively. The wafer-scale process is compatible with standard semiconductor microfabrication, as multiple micrometer-sized patterns can be created simultaneously for potential device applications. Normal-incidence transmission spectra in the visible and near-infrared regions show distinct peaks due to Bragg diffraction from 3D ordered structures. The spin-coating process opens a new route to the fundamental studies of shear-induced crystallization, melting and relaxation.

Colloids↗

PubMed2004

Measuring visual opacity using digital imaging technology.

The U.S. Environmental Protection Agency (EPA) Reference Method 9 (Method 9) is the preferred enforcement approach for verifying facility compliance with federal visible opacity standards. Supporters of Method 9 have cited its flexibility and low cost as important technological and economic advantages of the methodology. The Digital Opacity Compliance System (DOCS), an innovative technology that employs digital imaging technology for quantifying visible opacity, has been proposed as a technically defensible and economically competitive alternative to Method 9. Results from the field application of the DOCS at EPA-approved Method 9 smoke schools located in Ogden, UT, Augusta, GA, and Columbus, OH, demonstrated that, under clear sky conditions, the DOCS consistently met the opacity error rate established under Method 9. Application of hypothesis testing on the smoke school data set confirmed that the DOCS was equivalent to Method 9 under clear sky conditions. Under overcast sky conditions, human observers seemed to be more accurate than the DOCS in measuring opacity. However, within the smoke school environment, human observers routinely employ backgrounds other than sky (e.g., trees, telephone poles, billboards) to quantify opacity on overcast days. Under conditions that compel the use of sky as plume background (e.g., emission stacks having heights above the tree line), the DOCS appears to be a more accurate methodology for quantifying opacity than are human observers.

Air Pollutants↗

PubMed2004

Use of noise attenuation modeling in managing missile motor detonation activities.

The Sound Intensity Prediction System (SIPS) and Blast Operation Overpressure Model (BOOM) are semiempirical sound models that are employed by the Utah Test and Training Range (UTTR) to predict whether noise levels from the detonation of large missile motors will exceed regulatory thresholds. Field validation of SIPS confirmed that the model was effective in limiting the number of detonations of large missile motors that could potentially result in a regulatory noise exceedance. Although the SIPS accurately predicted the impact of weather on detonation noise propagation, regulators have required that the more conservative BOOM model be employed in conjunction with SIPS in evaluating peak noise levels in populated areas. By simultaneously considering the output of both models, in 2001, UTTR detonated 104 missile motors having net explosive weights (NEW) that ranged between 14,960 and 38,938 lb without a recorded public noise complaint. Based on the encouraging results, the U.S. Department of Defense is considering expanding the application of these noise models to support the detonation of missile motors having a NEW of 81,000 lb. Recent modeling results suggest that, under appropriate weather conditions, missile motors containing up to 96,000 lb NEW can be detonated at the UTTR without exceeding the regulatory noise limit of 134 decibels (dB).

Explosions↗

PubMed2004

Development of a hazardous air pollutants monitoring program using the Data Quality Objectives process.

To effectively reduce the environmental compliance costs associated with meeting hazardous air pollutant emission requirements, the U.S. Environmental Protection Agency's Data Quality Objective (DQO) process has been proposed as a suitable framework for establishing a defensible monitoring program. Through the use of a hazardous materials pilot study, the variability in the composite vapor pressure for regulated handwipe cleaning solvents was established. These results served as inputs to the DQO process, which identified that for facility decision-makers to claim with a 99% confidence level that the facility is in compliance with the National Emission Standards for Hazardous Air Pollutants (NESHAP), a minimum of 12 handwipe cleaning solvent compliance samples (taken at random every 6 months) must have a composite vapor pressure equal to or below the regulatory limit of 45 mmHg at 20 degrees C. Implementation of the DQO-based compliance-sampling plan eliminates the need for an affected facility to sample all regulated handwipe cleaning solvents while still maintaining a reasonably high level of confidence in the compliance status of its regulated sources. The approach described for designing a defensible compliance sampling plan can be extended to other aspects of the aerospace NESHAP rule, including compliance sampling for surface coating, chemical depainting, and hazardous waste disposal.

Air Pollutants↗

PubMed2003

Evaluation of the digital opacity compliance system in high mountain desert environments.

The digital opacity compliance system (DOCS) has been proposed as an alternative to the U.S. Environmental Protection Agency Reference Method 9 (Visual Determination of the Opacity of Emissions for Stationary Sources). The DOCS, which employs standard digital photography to estimate the opacity of visible emissions, was evaluated in a high mountain desert environment located in Weber County, UT. The DOCS recorded an average opacity deviation of 5.28% when applied to black smoke plumes having true opacities in the range of 0-100%, an error rate that was found to be significantly less than 7.5% (allowable error rate for attaining certification under Method 9). In contrast, results from estimating the opacity of white smoke plumes indicated that the accuracy of the DOCS was less than the Method 9 error rate only in the opacity range of 0-60%, over which the DOCS average opacity deviation was determined to be 6.7%. For the 0-40% opacity range, the DOCS recorded an average opacity deviation of 5.44% and 5.9% for black and white plumes, respectively. Results from the present study suggest that the DOCS has the potential to quantify visible opacity with an error rate that is significantly less than the Method 9 permissible error rate. Although encouraging, it is unclear to what extent the DOCS is affected by climatic conditions other than those encountered in a dry desert environment. Future studies should focus on evaluating the performance of the DOCS under variable weather conditions.

Algorithms↗