Biomedical subjects

Michael A Bevan

Publications and source records attributed to Michael A Bevan.

14 recordsLinked to original sources

PubMed2006

Diffusing colloidal probes of protein and synthetic macromolecule interactions.

A new approach is described for measuring kT and nanometer scale protein-protein and protein-synthetic macromolecule interactions. The utility of this method is demonstrated by measuring interactions of bovine serum albumin (BSA) and copolymers with exposed polyethyleneoxide (PEO) moieties adsorbed to hydrophobically modified colloids and surfaces. Total internal reflection and video microscopy are used to track three-dimensional trajectories of many single diffusing colloids that are analyzed to yield interaction potentials, mean-square displacements, and colloid-surface association lifetimes. A criterion is developed to identify colloids as being levitated, associated, or deposited based on energetic, spatial, statistical, and temporal information. Whereas levitation and deposition occur for strongly repulsive or attractive potentials, association is exponentially sensitive to weak interactions influenced by adsorbed layer architectures and surface heterogeneity. Systematic experiments reveal how BSA orientation and PEO molecular weight produce adsorbed layers that either conceal or expose substrate heterogeneities to generate a continuum of colloid-surface association lifetimes. These measurements provide simultaneous access to a broad range of information that consistently indicates purely repulsive BSA and PEO interactions and a role for surface heterogeneity in colloid-surface association. The demonstrated capability to measure nonspecific protein interactions provides a basis for future measurements of specific protein interactions.

Colloids↗

PubMed2006

Mapping patterned potential energy landscapes with diffusing colloidal probes.

We report a new method for mapping patterned surfaces based on monitoring the interactions of freely diffusing colloidal probes with pattern features to generate measured potential energy landscapes. Evanescent wave scattering and video microscopy are used to track 3D center positions of nominal 2 microm silica colloids as they diffuse over 5-20-nm-thick patterned gold films. An analysis of ensemble-averaged particle height histograms on different pattern features using Boltzmann's equation produces local electrostatic and van der Waals potentials in good agreement with independent measurements and predictions. Absolute separation is obtained from theoretical fits to measured potential-energy profiles and direct measurement by depositing silica colloids onto gold surfaces via electrophoretic deposition. As colloidal probe and pattern feature dimensions become comparable, potential energy profiles suffer some distortion due to the increased probability of probes sampling pattern feature edges. An analysis of interfacial colloidal probe diffusion in conjunction with potential energy measurements demonstrates a consistent interpretation of dissipative and conservative forces in these measurements. Future extensions of this work should produce similar approaches for interrogating physical, chemical, and biomolecular heterogeneous/patterned surfaces and structures with diffusing colloidal probes.

Colloids↗

PubMed2006

Self-diffusion in submonolayer colloidal fluids near a wall.

Theoretical expressions are developed to describe self-diffusion in submonolayer colloidal fluids that require only equilibrium structural information as input. Submonolayer colloidal fluids are defined for the purpose of this work to occur when gravity confines colloids near a planar wall surface so that they behave thermodynamically as two dimensional fluids. Expressions for self-diffusion are generalized to consider different colloid and surface interaction potentials and interfacial concentrations from infinite dilution to near fluid-solid coexistence. The accuracy of these expressions is demonstrated by comparing self-diffusion coefficients predicted from Monte Carlo simulated equilibrium particle configurations with standard measures of self-diffusion evaluated from Stokesian Dynamics simulated particle trajectories. It is shown that diffusivities predicted for simulated equilibrium fluid structures via multibody hydrodynamic resistance tensors and particle distribution functions display excellent agreement with values computed from mean squared displacements and autocorrelation functions of simulated tracer particles. Results are obtained for short and long time self-diffusion both parallel and normal to underlying planar wall surfaces in fluids composed of particles having either repulsive electrostatic or attractive van der Waals interactions. The demonstrated accuracy of these expressions for self-diffusion should allow their direct application to experiments involving submonolayer colloidal fluids having a range of interaction potentials and interfacial concentrations.

Journal Article↗

PubMed2006

Dynamic signature for the equilibrium percolation threshold of attractive colloidal fluids.

Short-time self-diffusivities, D(S)S, are computed for attractive colloidal fluids with van der Waals potentials to identify their percolation threshold and a previously unexplained dynamic transition. Our results show a discontinuous change in the slope of D(S)S vs temperature as the percolation threshold is crossed. Because D(S)S depends only on multibody hydrodynamic interactions, the percolation threshold of attractive colloidal fluids is shown to correspond to a transition in a dynamic property consistent with the linear viscoelastic measurements of Woutersen et al., J. Chem. Phys. 101, 542 (1994).

Journal Article↗

PubMed2006

Anomalous potentials from inverse analyses of interfacial polydisperse attractive colloidal fluids.

This paper investigates effects of using monodisperse inverse analyses to extract particle-particle and particle-surface potentials from simulated interfacial colloidal fluids of polydisperse attractive particles. Effects of polydispersity are investigated as functions of particle concentration and attractive well depth and range for van der Waals and depletion potentials. Forward Monte Carlo simulations are used to generate particle distribution functions for polydisperse interfacial colloidal fluids from which inverted potentials are obtained using an inverse Ornstein-Zernike analysis and an inverse Monte Carlo simulation method. Attractive potentials are successfully recovered for monodisperse colloidal fluids, but polydispersity that is unaccounted for in inverse analyses produces (1) apparent softening of strong forces, (2) anomalous repulsive and attractive interactions, and (3) aphysical particle overlaps. This investigation provides insights into the role of polydispersity in altering the equilibrium structure and corresponding inverted potentials of attractive colloidal fluids near surfaces. These findings should assist the design and interpretation of optical microscopy experiments involving interfacial colloidal fluids similar to the simulated experiments reported here.

Journal Article↗

PubMed2005

Role of polydispersity in anomalous interactions in electrostatically levitated colloidal systems.

In this paper, we investigate the effects of using inverse analyses developed for monodisperse particles to extract particle-particle and particle-surface potentials from simulated interfacial colloidal configurations having finite-size polydispersity. Forward Monte Carlo simulations are used to generate three-dimensional equilibrium configurations of log normal-distributed polydisperse particles confined by gravity near an underlying surface. Particles remain levitated above the substrate and stabilized against aggregation by repulsive electrostatic Derjaguin-Landau-Verwey-Overbeek pair potentials. An inverse Ornstein-Zernike analysis and an inverse Monte Carlo simulation method are used to obtain interactions from simulated distribution functions as a function of polydispersity (sigma), relative range of repulsion (kappa a), and projected interfacial concentration (rho). Both inverse analyses successfully recover input potentials for all monodisperse cases, but fail for polydispersities often encountered in experiments. For different conditions (sigma, kappa a, and rho), our results indicate softened short-range repulsion, anomalous long-range attraction, and apparent particle overlaps, which are similar to commonly reported observations in optical microscopy measurements of quasi-two-dimensional interfacial colloidal ensembles. By demonstrating signatures of, and limitations due to, polydispersity when extracting pair potentials from measured distribution functions, our specific goal is to provide a basis to objectively interpret and resolve the effects of polydispersity in optical microscopy experiments.

Journal Article↗

PubMed2005

Measurement and interpretation of particle-particle and particle-wall interactions in levitated colloidal ensembles.

This paper reports measurements of particle-wall and particle-particle interactions in levitated colloidal ensembles using integrated total internal reflection microscopy (TIRM) and video microscopy (VM) techniques. In levitated colloidal ensembles with area fractions of phiA = 0.03-0.25, ensemble TIRM measured height distribution functions are used to interpret particle-wall interactions, and VM measured pair distribution functions are used to interpret particle-particle interactions using inverse Ornstein-Zernike (OZ) and three-dimensional inverse Monte Carlo (MC) analyses. An inconsistent finding is the observation of an anomalous long-range particle-particle attraction and recovery of the expected Derjaguin-Landau-Verwey-Overbeek (DLVO) particle-wall interactions for all concentrations examined. Because particle-wall and particle-particle potentials are expected to be consistent in several respects, the analytical and experimental methods employed in this investigation are examined for possible sources of error. Comparison of inverse OZ and three-dimensional inverse MC analyses are used to address uncertainties related to dimensionality, effects of particle concentration, and assumptions of the OZ theory and closure relations. The possible influence of charge heterogeneity and particle size polydispersity on measured distribution functions is discussed with regard to inconsistent particle-wall and particle-particle potentials. Ultimately, achieving a consistent understanding of particle-wall and particle-particle interactions in interfacial and confined colloidal systems is essential to numerous complex fluid and advanced material technologies.

Journal Article↗

PubMed2005

Inverse density-functional theory as an interpretive tool for measuring colloid-surface interactions in dense systems.

Recent advances in optical microscopy, such as total internal reflection and confocal scanning laser techniques, now permit the direct three-dimensional tracking of large numbers of colloidal particles both near and far from interfaces. A novel application of this technology, currently being developed by one of the authors under the name of diffusing colloidal probe microscopy (DCPM), is to use colloidal particles as probes of the energetic characteristics of a surface. A major theoretical challenge in implementing DCPM is to obtain the potential energy of a single particle in the external field created by the surface, from the measured particle trajectories in a dense colloidal system. In this paper we develop an approach based on an inversion of density-functional theory (DFT), where we calculate the single-particle-surface potential from the experimentally measured equilibrium density profile in a nondilute colloidal fluid. The underlying DFT formulation is based on the recent work of Zhou and Ruckenstein [Zhou and Ruckenstein, J. Chem. Phys. 112, 8079 (2000)]. For model hard-sphere and Lennard-Jones systems, using Monte Carlo simulation to provide the "experimental" density profiles, we found that the inversion procedure reproduces the true particle-surface-potential energy to an accuracy within typical DCPM experimental limitations (approximately 0.1 kT) at low to moderate colloidal densities. The choice of DFT closures also significantly affects the accuracy.

Journal Article↗

PubMed2005

Direct measurement of single and ensemble average particle-surface potential energy profiles.

This work involves the development of a novel technique that integrates total internal reflection and video microscopy methods to simultaneously measure single particle and ensemble average particle-surface interactions. For the 2 mum silica colloids and glass coverslip used in this study, particle size polydispersity is found to be a dominant factor in determining the distribution of single particle profiles about ensemble average profiles. In conjunction with this observation, chemical and physical nonuniformity are not evident in any of our measurements even with sensitivity to interactions on the order of kT. One advantage of using ensemble averaging in conjunction with time averaging is the ability to dramatically decrease the time required to measure average particle-wall interactions which scales inversely with interfacial particle concentration. A number of experimental issues are addressed in the development of this technique including (1) combining single particle distribution functions, (2) statistical sampling of distribution functions using both time and ensemble averaging, and (3) correcting overlapping scattering signals between adjacent particles. The capabilities of the ensemble averaging technique are also demonstrated to provide unique measurements of particle-surface interactions in metastable systems by selecting only height excursions of levitated particles when calculating potentials. Ultimately, this new technique provides several important advantages over single particle measurements, which provides a foundation for measuring interactions in increasingly complex interfacial systems.

Journal Article↗

PubMed2005

Interpretation of conservative forces from Stokesian dynamic simulations of interfacial and confined colloids.

This paper presents Stokesian dynamics simulations of experiments involving one or two charged colloids near either a single charged wall or confined between parallel charged walls. Equilibrium particle-particle and particle-wall interactions are interpreted from dynamic particle trajectories in simulations involving (1) a single particle levitated above a wall, (2) two particles below a wall, and (3) two particles confined between two parallel walls. By specifying only repulsive electrostatic Derjaguin-Landau-Verwey-Overbeek (DLVO) potentials and including multibody hydrodynamics, we successfully recover expected potentials in some cases, while anomalous attraction is observed in other cases. Attraction inferred in the latter simulations displays quantitative agreement with literature measurements when particle dynamics are interpreted using reported analyses. Because anomalous attraction is reproduced in simulations using only electrostatic repulsive DLVO potentials, our results reveal the one-dimensional analyses to be invalid for configurations that are inherently multidimensional via multibody hydrodynamics. Parameters related to experimental sampling of particle dynamics are also found to be critical for obtaining accurate potentials. We explain the anomalous attraction in each experiment using effective potentials, which can be employed in an a priori fashion to assist the confident design of future experiments involving interfacial and confined colloids. Ultimately, our findings reveal the importance of dimensionality and multibody hydrodynamics for understanding nonequilibrium dynamics of colloids near surfaces.

Journal Article↗

PubMed2004

Specific ion-dependent attraction and phase behavior of polymer-coated colloids.

This paper presents results demonstrating the role of temperature and specific ions in mediating attraction between polymer-coated colloids and determining their equilibrium phase behavior. In particular, theoretical predictions of continuum van der Waals attraction between poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO)-coated polystyrene colloids are used to explain measured temperature and specific ion-dependent fluid-gel transitions in dispersions of these particles. Building on previous studies of PEO-PPO-PEO-coated polystyrene colloids dispersed in aqueous NaCl media, this work reports rheologically measured fluid-gel transitions as a function of temperature and NaCl/MgSO4 composition. Adhesive-sphere predictions of percolation thresholds are fit to measured fluid-gel data by allowing the adsorbed copolymer layer thickness as a single adjustable parameter. This allows the attraction between the PEO-PPO-PEO layers to be interpreted as a function of temperature and NaCl/MgSO4 composition. Quantitative predictions of a polymeric van der Waals attraction associated with the layer collapse in diminishing solvent conditions provides a simple mechanism for explaining the measured fluid-gel data as a dynamic percolation transition. Ultimately, this work identifies the importance of continuum polymeric van der Waals attraction for explaining specific ion-dependent phenomena.

Journal Article↗

PubMed2004

Structural evolution of colloidal crystals with increasing ionic strength.

We have directly observed the structural evolution of colloidal crystals as a function of increasing ionic strength using confocal scanning laser microscopy. Silica colloids were sedimented onto a glass substrate in deionized water to create large, single domain crystals. The solution ionic strength was then increased by one of three methods of controlled electrolyte addition: (1) direct injection of electrolyte solutions, (2) single step diffusion of electrolyte solutions through a dialysis membrane, and (3) multiple step diffusion of electrolyte solutions of increasing ionic strength through a dialysis membrane. During direct injection of electrolyte solutions, initially large, single domain colloidal crystals were shear melted and then evolved into polycrystalline structures at low ionic strengths and gels at higher ionic strengths. Diffusion of electrolyte solutions though dialysis membranes in a single step produced gradient-driven transport that also melted initial single domain crystals to yield polycrystalline and gel structures similar to the injection approach. Interestingly, the multistep diffusion of several electrolyte solutions through dialysis membranes facilitated retention of large, single domain crystals even as particles came into adhesive contact. This was achieved by reducing the contraction rate of the crystalline lattice to allow sufficient time for diffusion-limited configurational rearrangements to occur within the evolving structure. These mechanically robust, single domain colloidal crystals may find important applications as templates for photonic materials and sensors.

Journal Article↗

PubMed2004

Comparison of nanoparticle size and electrophoretic mobility measurements using a carbon-nanotube-based coulter counter, dynamic light scattering, transmission electron microscopy, and phase analysis light scattering.

The precision and accuracy of measurements of the diameter and electrophoretic mobility (mu) of polymeric nanoparticles is compared using four different analytical approaches: carbon-nanotube-based Coulter counting, dynamic light scattering (DLS), transmission electron microscopy (TEM), and phase analysis light scattering (PALS). Carbon-nanotube-based Coulter counters (CNCCs) use a 132 nm diameter channel to simultaneously determine the diameter (28-90 nm) and mu value for individual nanoparticles. These measurements are made without calibration of the CNCC and without labeling the sample. Moreover, because CNCCs measure the properties of individual particles, they provide true averages and polydispersities that are not convoluted into the intrinsic instrumental response function of the CNCC. CNCCs can be used to measure the size of individual nanoparticles dispersed in aqueous solutions, which contrasts with the TEM-measured size of individual dehydrated particles and the ensemble size averages of dispersed particles provided by DLS. CNCCs provide more precise values of mu than PALS.

Journal Article↗

PubMed2004

Nanoparticle-mediated epitaxial assembly of colloidal crystals on patterned substrates.

We have studied the assembly of 3-D colloidal crystals from binary mixtures of colloidal microspheres and highly charged nanoparticles on flat and epitaxially patterned substrates created by focused ion beam milling. The microspheres were settled onto these substrates from dilute binary mixtures. Laser scanning confocal microscopy was used to directly observe microsphere structural evolution during sedimentation, nanoparticle gelation, and subsequent drying. After microsphere settling, the nanoparticle solution surrounding the colloidal crystal was gelled in situ by introducing ammonia vapor, which increased the pH and enabled drying with minimal microsphere rearrangement. By infilling the dried colloidal crystals with an index-matched fluorescent dye solution, we generated full 3-D reconstructions of their structure including defects as a function of initial suspension composition and pitch of the patterned features. Through proper control over these important parameters, 3-D colloidal crystals were created with low defect densities suitable for use as templates for photonic crystals and photonic band gap materials.

Journal Article↗