Search PubMed⌕ Search

Biomedical subjects

Mehmet Sarikaya

Publications and source records attributed to Mehmet Sarikaya.

13 recordsLinked to original sources
PubMed2006

Adsorption kinetics of an engineered gold binding Peptide by surface plasmon resonance spectroscopy and a quartz crystal microbalance.

The adsorption kinetics of an engineered gold binding peptide on gold surface was studied by using both quartz crystal microbalance (QCM) and surface plasmon resonance (SPR) spectroscopy systems. The gold binding peptide was originally selected as a 14-amino acid sequence by cell surface display and then engineered to have a 3-repeat form (3R-GBP1) with improved binding characteristics. Both sets of adsorption data for 3R-GBP1 were fit to Langmuir models to extract kinetics and thermodynamics parameters. In SPR, the adsorption onto the surface shows a biexponential behavior and this is explained as the effect of bimodal surface topology of the polycrystalline gold substrate on 3R-GBP1 binding. Depending on the concentration of the peptide, a preferential adsorption on the surface takes place with different energy levels. The kinetic parameters (e.g., K(eq) approximately 10(7) M(-1)) and the binding energy (approximately -8.0 kcal/mol) are comparable to synthetic-based self-assembled monolayers. The results demonstrate the potential utilization of genetically engineered inorganic surface-specific peptides as molecular substrates due to their binding specificity, stability, and functionality in an aqueous-based environment.

Adsorption↗
PubMed2006

Materials specificity and directed assembly of a gold-binding peptide.

Adsorption studies of a genetically engineered gold-binding peptide, GBP1, were carried out using a quartz-crystal microbalance (QCM) to quantify its molecular affinity to noble metals. The peptide showed higher adsorption onto and lower desorption from a gold surface compared to a platinum substrate. The material specificity, that is, the preferential adsorption, of GBP1 was also demonstrated using gold and platinum micropatterned on a silicon wafer containing native oxide. The biotinylated three-repeat units of GBP1 were preferentially adsorbed onto gold regions delineated using streptavidin-conjugated quantum dots (SAQDs). These experiments not only demonstrate that an inorganic-binding peptide could preferentially adsorb onto a metal (Au) rather than an oxide (SiO2) but also onto one noble metal (Au) over another (Pt). This result shows the utility of an engineered peptide as a molecular erector in the directed immobilization of a nanoscale hybrid entity (SAQDs) over selected regions (Au) on a fairly complex substrate (Au and Pt micropatterned regions on silica). The selective and controlled adsorption of inorganic-binding peptides may have significant implications in nano- and nanobiotechnology, where they could be genetically tailored for specific use in the development of self-assembled molecular systems.

Adsorption↗
PubMed2005

Nonequilibrium synthesis and assembly of hybrid inorganic-protein nanostructures using an engineered DNA binding protein.

We show that a protein with no intrinsic inorganic synthesis activity can be endowed with the ability to control the formation of inorganic nanostructures under thermodynamically unfavorable (nonequilibrium) conditions, reproducing a key feature of biological hard-tissue growth and assembly. The nonequilibrium synthesis of Cu(2)O nanoparticles is accomplished using an engineered derivative of the DNA-binding protein TraI in a room-temperature precursor electrolyte. The functional TraI derivative (TraIi1753::CN225) is engineered to possess a cysteine-constrained 12-residue Cu(2)O binding sequence, designated CN225, that is inserted into a permissive site in TraI. When TraIi1753::CN225 is included in the precursor electrolyte, stable Cu(2)O nanoparticles form, even though the concentrations of [Cu(+)] and [OH(-)] are at 5% of the solubility product (K(sp,Cu2O)). Negative control experiments verify that Cu(2)O formation is controlled by inclusion of the CN225 binding sequence. Transmission electron microscopy and electron diffraction reveal a core-shell structure for the nonequilibrium nanoparticles: a 2 nm Cu(2)O core is surrounded by an adsorbed protein shell. Quantitative protein adsorption studies show that the unexpected stability of Cu(2)O is imparted by the nanomolar surface binding affinity of TraIi1753::CN225 for Cu(2)O (K(d) = 1.2 x 10(-)(8) M), which provides favorable interfacial energetics (-45 kJ/mol) for the core-shell configuration. The protein shell retains the DNA-binding traits of TraI, as evidenced by the spontaneous organization of nanoparticles onto circular double-stranded DNA.

Adsorption↗
PubMed2005

Electrochemical nanofabrication using crystalline protein masks.

We have developed a simple and robust method to fabricate nanoarrays of metals and metal oxides over macroscopic substrates using the crystalline surface layer (S-layer) protein of Deinococcus radiodurans as an electrodeposition mask. Substrates are coated by adsorption of the S-layer from a detergent-stabilized aqueous protein extract, producing insulating masks with 2-3 nm diameter solvent-accessible openings to the deposition substrate. The coating process can be controlled to achieve complete or fractional surface coverage. We demonstrate the general applicability of the technique by forming arrays of cuprous oxide (Cu(2)O), Ni, Pt, Pd, and Co exhibiting long-range order with the 18 nm hexagonal periodicity of the protein openings. This protein-based approach to electrochemical nanofabrication should permit the creation of a wide variety of two-dimensional inorganic structures.

Bacterial Proteins↗
PubMed2005

Metal recognition of septapeptides via polypod molecular architecture.

The understanding of the nature of recognition of inorganic materials by proteins is one of the core elements of and has profound implications in biological materials science and engineering. Using combinatorial display methods, a considerable number of short polypeptides have recently been selected with affinity to engineering materials. During these selections, more than several polypeptides are identified with binding specificity to a chosen inorganic material. Understanding the nature of surface recognition of materials by polypeptides is essential for rational design and biomimetic engineering of these inorganic-binding polypeptides for use as linkers, catalyzers, and growth modifiers in nanotechnology and nanobiotechnology. Although there may not be direct homology among the amino acids constituting the polypeptides, their function may come from conserved molecular architecture. Here we study crystallographic surface recognition of platinum metal-binding septapeptides by conformational analysis. We find that the septapeptides conform into certain molecular architectures containing multiple protrusions (polypods) that spatially match with the crystallographic metal surfaces. While the physical recognition may originate from how well the molecular polypods spatially match a given crystallographic surface, the degree of binding may be due to the reactive groups that form the polypods, e.g., charged or polar groups (e.g., hydroxyl and amine). These results are highly consistent with the experimental binding characteristics of the Pt binders with various degrees of affinities.

Binding Sites↗
PubMed2004

Hsp70 and Hsp40 attenuate formation of spherical and annular polyglutamine oligomers by partitioning monomer.

Protein conformational changes that result in misfolding, aggregation and amyloid fibril formation are a common feature of many neurodegenerative disorders. Studies with beta-amyloid (Abeta), alpha-synuclein and other amyloid-forming proteins indicate that the assembly of misfolded protein conformers into fibrils is a complex process that may involve the population of metastable spherical and/or annular oligomeric assemblies. Here, we show by atomic force microscopy that a mutant huntingtin fragment with an expanded polyglutamine repeat forms spherical and annular oligomeric structures reminiscent of those formed by Abeta and alpha-synuclein. Notably, the molecular chaperones Hsp70 and Hsp40, which are protective in animal models of neurodegeneration, modulate polyglutamine aggregation reactions by partitioning monomeric conformations and disfavoring the accretion of spherical and annular oligomers.

Adenosine Triphosphatases↗
PubMed2004

Identification and characterization of Cu(2)O- and ZnO-binding polypeptides by Escherichia coli cell surface display: toward an understanding of metal oxide binding.

We have used the FliTrx cell surface display system to identify disulfide-constrained dodecapeptides binding to the semiconducting metal oxides Cu(2)O and ZnO. Sequence analysis of the inserts revealed that the two populations exhibit similar, yet subtly different patterns of amino acid usage. Both sets of binders were enriched in arginine, tryptophan, and glycine with a higher degree of positional preference in the case of Cu(2)O binders. Tyrosine, proline, and serine were underrepresented in both populations. Peptides binding electrodeposited Cu(2)O or ZnO with high avidity could be subdivided into two classes based on pI and hydrophilicity. In the hydrophilic and positively charged Class I binders, the Arg-X-X-Arg tetrapeptide appears to be implicated in metal oxide binding, whereas Arg-Arg and Arg-Lys pairs allow for discrimination between Cu(2)O and ZnO. Molecular dynamics simulations of the disulfide-constrained peptides suggest that the aforementioned motifs are important to properly orient two basic residues that are likely to contact the metal oxides. The implications of our results in understanding the rules governing the interaction between peptides and inorganic compounds and in their use for the design of hybrid nanoarchitectures are discussed.

Amino Acid Motifs↗
PubMed2003

Molecular biomimetics: nanotechnology through biology.

Proteins, through their unique and specific interactions with other macromolecules and inorganics, control structures and functions of all biological hard and soft tissues in organisms. Molecular biomimetics is an emerging field in which hybrid technologies are developed by using the tools of molecular biology and nanotechnology. Taking lessons from biology, polypeptides can now be genetically engineered to specifically bind to selected inorganic compounds for applications in nano- and biotechnology. This review discusses combinatorial biological protocols, that is, bacterial cell surface and phage-display technologies, in the selection of short sequences that have affinity to (noble) metals, semiconducting oxides and other technological compounds. These genetically engineered proteins for inorganics (GEPIs) can be used in the assembly of functional nanostructures. Based on the three fundamental principles of molecular recognition, self-assembly and DNA manipulation, we highlight successful uses of GEPI in nanotechnology.

Amino Acid Sequence↗
PubMed2003

Enamel structure properties controlled by engineered proteins in transgenic mice.

UNLABELLED: Amelogenin protein has regulatory effects on enamel biofabrication in mammalian tooth. Using teeth obtained from transgenic mice that express two separate protein-engineered versions of amelogenins, we made structure-nanomechanical properties correlations and showed 21% hardness and 24% elastic modulus degradation compared with the age-matched wildtype littermates. We attribute the inferior properties to the disorganization of the protein matrix resulting in defective mineral formation. INTRODUCTION: Enamel is a bioceramic initiated by the biosynthesis of a complex mixture of proteins that undergoes self-assembly to produce a super molecular ensemble that controls the nucleation and habit of the crystalline mineral phase. Ultimately, the inorganic crystals grow to almost fully replace the organic phase. This biofabrication process occurs at physiologic conditions of pH, temperature, pressure, and ion concentration and results in the hardest tissue in the vertebrate body, with the largest and longest substituted-hydroxyapatite crystals known to biomineralizing systems. The most abundant protein of forming mammalian enamel, amelogenin, has been shown to have a significant regulatory effect on this complex process. MATERIALS AND METHODS: In this work, we present the effect of protein engineering of amelogenin on the mechanical properties of the resultant mouse enamel. We have produced two types of transgenic animals that express separate versions of amelogenin proteins that lack the required self-assembly domains. The resultant matured enamel was extensively characterized for its mechanical properties at the nanoscale by means of nanoindentation and atomic force microscopy (AFM). These techniques have enabled us to probe the mechanical properties that are representative of a single enamel rod. RESULTS: Our nanoindentation measurements have revealed that the altered amelogenin with dysfunctional self-assembly properties resulted in a degradation by as much as 21% in hardness and 24% in elastic modulus compared with the age-matched wildtype littermates. Furthermore, the enamel formed by these defective proteins is found to display a decrease in indentation surface pile-up volume by up to 32%. CONCLUSIONS: We attribute these inferior mechanical properties for the enamel grown by the engineered amelogenins to result from the disorganization of the nanospheres formed in the protein matrix starting at the mineral nucleation stage with a consequential alteration to the fully grown mineral component. By engineering the properties of proteins that contribute to the nanoscale level of hierarchy in enamel biomineralization, it is possible to regulate the properties of the resulting bioceramic at the mesoscale level of the tissue.

Amelogenin↗
PubMed2002

Genetically engineered gold-binding polypeptides: structure prediction and molecular dynamics.

The biological control of inorganic crystal formation, morphology, and assembly is of interest to biologists and biotechnologists studying hard tissue growth and regeneration, as well as to materials scientists using biomimetic approaches for the control of inorganic material fabrication and assembly. Biomimetics requires an accurate understanding of natural mechanisms at the molecular level. Such understanding can be derived from the use of metal surfaces to study surface recognition by proteins together with combinatorial genetics techniques for the selection of suitable peptides. Polymerization of these peptides produces engineered polypeptides large enough to encode their own folding information with low structural complexity, while enhancing binding affinity to surfaces. The low complexity of such polypeptides can aid in analyses, leading to modeling and eventual manipulation of the structure of the folded polypeptide. This paper presents structure predictions for gold-binding protein sequences, originally selected by combinatorial techniques. Molecular dynamics simulations lasting 5 ns were carried out using solvated polypeptides at the gold surface to assess the dynamics of the binding process and the effects of surface topography on the specificity of protein binding.

Amino Acid Sequence↗