Search PubMed⌕ Search

Biomedical subjects

Matthias Rief

Publications and source records attributed to Matthias Rief.

18 recordsLinked to original sources

Filamin-regulated F-actin assembly is essential for morphogenesis and controls phototaxis in Dictyostelium.

Dictyostelium strains lacking the F-actin cross-linking protein filamin (ddFLN) have a severe phototaxis defect at the multicellular slug stage. Filamins are rod-shaped homodimers that cross-link the actin cytoskeleton into highly viscous, orthogonal networks. Each monomer chain of filamin is comprised of an F-actin-binding domain and a rod domain. In rescue experiments only intact filamin re-established correct phototaxis in filamin minus mutants, whereas C-terminally truncated filamin proteins that had lost the dimerization domain and molecules lacking internal repeats but retaining the dimerization domain did not rescue the phototaxis defect. Deletion of individual rod repeats also changed their subcellular localization, and mutant filamins in general were less enriched at the cell cortex as compared with the full-length protein and were increasingly present in the cytoplasm. For correct phototaxis ddFLN is only required at the tip of the slug because expression under control of the cell type-specific extracellular-matrix protein A (ecmA) promoter and mixing experiments with wild type cells supported phototactic orientation. Likewise, in chimeric slugs wild type cells were primarily found at the tip of the slug, which acts as an organizer in Dictyostelium morphogenesis.

Actins↗

Anisotropic deformation response of single protein molecules.

Single-molecule methods have given experimental access to the mechanical properties of single protein molecules. So far, access has been limited to mostly one spatial direction of force application. Here, we report single-molecule experiments that explore the mechanical properties of a folded protein structure in precisely controlled directions by applying force to selected amino acid pairs. We investigated the deformation response of GFP in five selected directions. We found fracture forces widely varying from 100 pN up to 600 pN. We show that straining the GFP structure in one of the five directions induces partial fracture of the protein into a half-folded intermediate structure. From potential widths we estimated directional spring constants of the GFP structure and found values ranging from 1 N/m up to 17 N/m. Our results show that classical continuum mechanics and simple mechanistic models fail to describe the complex mechanics of the GFP protein structure and offer insights into the mechanical design of protein materials.

Anisotropy↗

Myosin-V is a mechanical ratchet.

Myosin-V is a linear molecular motor that hydrolyzes ATP to move processively toward the plus end of actin filaments. Motion of this motor under low forces has been studied recently in various single-molecule assays. In this paper we show that myosin-V reacts to high forces as a mechanical ratchet. High backward loads can induce rapid and processive backward steps along the actin filament. This motion is completely independent of ATP binding and hydrolysis. In contrast, forward forces cannot induce ATP-independent forward steps. We can explain this pronounced mechanical asymmetry by a model in which the strength of actin binding of a motor head is modulated by the lever arm conformation. Knowledge of the complete force-velocity dependence of molecular motors is important to understand their function in the cellular environment.

Actins↗

Flexibility of the neck domain enhances Kinesin-1 motility under load.

Kinesin-1 is a dimeric motor protein that moves stepwise along microtubules. A two-stranded alpha-helical coiled-coil formed by the neck domain links the two heads of the molecule, and forces the motor heads to alternate. By exchanging the particularly soft neck region of the conventional kinesin from the fungus Neurospora crassa with an artificial, highly stable coiled-coil we investigated how this domain affects motor kinetics and motility. Under unloaded standard conditions, both motor constructs developed the same gliding velocity. However, in a force-feedback laser trap the mutant showed increasing motility defects with increasing loads, and did not reach wild-type velocities and run lengths. The stall force dropped significantly from 4.1 to 3.0 pN. These results indicate the compliance of kinesin's neck is important to sustain motility under load, and reveal a so far unknown constrain on the imperfect coiled-coil heptad pattern of Kinesin-1. We conclude that coiled-coil structures, a motif encountered in various types of molecular motors, are not merely a clamp for linking two heavy chains to a functional unit but may have specifically evolved to allow motor progression in a viscous, inhomogeneous environment or when several motors attached to a transported vesicle are required to cooperate efficiently.

Amino Acid Substitution↗

Single molecule unzipping of coiled coils: sequence resolved stability profiles.

We use a high resolution atomic force microscopy technique to mechanically unzip and rezip single coiled-coil proteins. This allows us to read off the complete stability profile of the protein turn by turn. We investigated three coiled coils with different length as well as a point mutation and find force fluctuations between 9 and 15 pN that can be directly related to the amino-acid sequences. An equilibrium model previously applied to DNA fully describes the mechanical unzipping process including free-energy contributions of the individual turns and seed formation energy.

Journal Article↗

Protein structure by mechanical triangulation.

Knowledge of protein structure is essential to understand protein function. High-resolution protein structure has so far been the domain of ensemble methods. Here, we develop a simple single-molecule technique to measure spatial position of selected residues within a folded and functional protein structure in solution. Construction and mechanical unfolding of cysteine-engineered polyproteins with controlled linkage topology allows measuring intramolecular distance with angstrom precision. We demonstrate the potential of this technique by determining the position of three residues in the structure of green fluorescent protein (GFP). Our results perfectly agree with the GFP crystal structure. Mechanical triangulation can find many applications where current bulk structural methods fail.

Calibration↗

Single-molecule unfolding force distributions reveal a funnel-shaped energy landscape.

The protein folding process is described as diffusion on a high-dimensional energy landscape. Experimental data showing details of the underlying energy surface are essential to understanding folding. So far in single-molecule mechanical unfolding experiments a simplified model assuming a force-independent transition state has been used to extract such information. Here we show that this so-called Bell model, although fitting well to force velocity data, fails to reproduce full unfolding force distributions. We show that by applying Kramers' diffusion model, we were able to reconstruct a detailed funnel-like curvature of the underlying energy landscape and establish full agreement with the data. We demonstrate that obtaining spatially resolved details of the unfolding energy landscape from mechanical single-molecule protein unfolding experiments requires models that go beyond the Bell model.

Models, Molecular↗

Temperature softening of a protein in single-molecule experiments.

Mechanical flexibility is crucial for the function of proteins. However, such material properties are not easily accessible experimentally. We used single-molecule force spectroscopy to study the stiffness of a single domain of Dictyostelium discoideum filamin (ddFLN4) in a temperature range from 5 degrees C to 37 degrees C. Analyzing the distributions of unfolding forces allowed us to extract transition barrier heights and positions of the underlying energy landscape. We found a marked narrowing of unfolding force distributions with increasing temperature. This narrowing reflects an increase in transition state position from 2.7 A to 7.8 A and thus a reduction of the molecular spring constant of the protein by a factor of 7. We suggest this temperature softening reflects a shift in the nature of the interactions responsible for mechanical stability from hydrogen bonds to hydrophobic interactions. This result has important consequences for all interpretations of protein mechanical studies if experimental results obtained at room temperature are to be transferred to physiological temperatures.

Animals↗

Covalent immobilization of recombinant fusion proteins with hAGT for single molecule force spectroscopy.

A genetically modified form of the human DNA repair protein O(6)-alkylguanine-DNA-alkyltransferase (hAGT) was used to immobilize different recombinant hAGT fusion proteins covalently and selectively on gold and glass surfaces. Fusion proteins of hAGT with Glutathione S-Transferase and with tandem repeats of Titin Ig-domains, were produced and anchored via amino-polyethylene glycol benzylguanine. Anchoring was characterized and quantified with surface plasmon resonance, atomic force microscope and fluorescence measurements. Individual fusion proteins were unfolded by single molecule force spectroscopy corroborating the selectivity of the covalent attachment.

Binding Sites↗

Force-dependent stepping kinetics of myosin-V.

Myosin-V is a processive two-headed actin-based motor protein involved in many intracellular transport processes. A key question for understanding myosin-V function and the communication between its two heads is its behavior under load. Since in vivo myosin-V colocalizes with other much stronger motors like kinesins, its behavior under superstall forces is especially relevant. We used optical tweezers with a long-range force feedback to study myosin-V motion under controlled external forward and backward loads over its full run length. We find the mean step size remains constant at approximately 36 nm over a wide range of forces from 5 pN forward to 1.5 pN backward load. We also find two force-dependent transitions in the chemomechanical cycle. The slower ADP-release is rate limiting at low loads and depends only weakly on force. The faster rate depends more strongly on force. The stronger force dependence suggests this rate represents the diffusive search of the leading head for its binding site. In contrast to kinesin motors, myosin-V's run length is essentially independent of force between 5 pN of forward to 1.5 pN of backward load. At superstall forces of 5 pN, we observe continuous backward stepping of myosin-V, indicating that a force-driven reversal of the power stroke is possible.

Animals↗

Highly stretched single polymers: atomic-force-microscope experiments versus ab-initio theory.

Experimental single-molecule stretching curves for three backbone architectures (single-stranded DNA, various types of peptides, polyvinylamine) are quantitatively compared with corresponding quantum-chemical (zero-temperature) ab-initio calculations in the high-force range of up to two nanonewtons. For high forces, quantitative agreement is obtained with the contour length of the polymers as the only fitting parameter. For smaller forces, the effects of chain fluctuations are accounted for by using recent theoretical results for the stretching response of a freely-rotating-chain model.

Computer Simulation↗

The folding pathway of a fast-folding immunoglobulin domain revealed by single-molecule mechanical experiments.

The F-actin crosslinker filamin from Dictyostelium discoideum (ddFLN) has a rod domain consisting of six structurally similar immunoglobulin domains. When subjected to a stretching force, domain 4 unfolds at a lower force than all the other domains in the chain. Moreover, this domain shows a stable intermediate along its mechanical unfolding pathway. We have developed a mechanical single-molecule analogue to a double-jump stopped-flow experiment to investigate the folding kinetics and pathway of this domain. We show that an obligatory and productive intermediate also occurs on the folding pathway of the domain. Identical mechanical properties suggest that the unfolding and refolding intermediates are closely related. The folding process can be divided into two consecutive steps: in the first step 60 C-terminal amino acids form an intermediate at the rate of 55 s(-1); and in the second step the remaining 40 amino acids are packed on this core at the rate of 179 s(-1). This division increases the overall folding rate of this domain by a factor of ten compared with all other homologous domains of ddFLN that lack the folding intermediate.

Animals↗

Exploring the energy landscape of GFP by single-molecule mechanical experiments.

We use single-molecule force spectroscopy to drive single GFP molecules from the native state through their complex energy landscape into the completely unfolded state. Unlike many smaller proteins, mechanical GFP unfolding proceeds by means of two subsequent intermediate states. The transition from the native state to the first intermediate state occurs near thermal equilibrium at approximately 35 pN and is characterized by detachment of a seven-residue N-terminal alpha-helix from the beta barrel. We measure the equilibrium free energy cost associated with this transition as 22 k(B)T. Detachment of this small alpha-helix completely destabilizes GFP thermodynamically even though the beta-barrel is still intact and can bear load. Mechanical stability of the protein on the millisecond timescale, however, is determined by the activation barrier of unfolding the beta-barrel out of this thermodynamically unstable intermediate state. High bandwidth, time-resolved measurements of the cantilever relaxation phase upon unfolding of the beta-barrel revealed a second metastable mechanical intermediate with one complete beta-strand detached from the barrel. Quantitative analysis of force distributions and lifetimes lead to a detailed picture of the complex mechanical unfolding pathway through a rough energy landscape.

Biophysical Phenomena↗

A mechanical unfolding intermediate in an actin-crosslinking protein.

Many F-actin crosslinking proteins consist of two actin-binding domains separated by a rod domain that can vary considerably in length and structure. In this study, we used single-molecule force spectroscopy to investigate the mechanics of the immunoglobulin (Ig) rod domains of filamin from Dictyostelium discoideum (ddFLN). We find that one of the six Ig domains unfolds at lower forces than do those of all other domains and exhibits a stable unfolding intermediate on its mechanical unfolding pathway. Amino acid inserts into various loops of this domain lead to contour length changes in the single-molecule unfolding pattern. These changes allowed us to map the stable core of approximately 60 amino acids that constitutes the unfolding intermediate. Fast refolding in combination with low unfolding forces suggest a potential in vivo role for this domain as a mechanically extensible element within the ddFLN rod.

Actins↗

Single-molecule folding.

Recent developments in fluorescence and force spectroscopy enable us to go beyond the ensemble average and measure the behavior of individual biomacromolecules. These single-molecule approaches can directly resolve transient intermediate states and multiple reaction pathways, and thus are uniquely powerful in characterizing the complex dynamics of biological processes. Recent applications of these two techniques to the protein and RNA folding problems have led to exciting new results.

Connectin↗

Force spectroscopy of single biomolecules.

Many processes in the body are effected and regulated by highly specialized protein molecules: These molecules certainly deserve the name "biochemical nanomachines". Recent progress in single-molecule experiments and corresponding simulations with supercomputers enable us to watch these "nanomachines" at work, revealing a host of astounding mechanisms. Examples are the fine-tuned movements of the binding pocket of a receptor protein locking into its ligand molecule and the forced unfolding of titin, which acts as a molecular shock absorber to protect muscle cells. At present, we are not capable of designing such high precision machines, but we are beginning to understand their working principles and to simulate and predict their function.

Ligands↗

The myosin coiled-coil is a truly elastic protein structure.

Coiled-coils occur in a variety of proteins involved in mechanical and structural tasks in the cell. Their mechanical properties are important in various contexts ranging from hair elasticity to synaptic fusion. Beyond their importance in biology, coiled-coils have also attracted interest as programmable protein sequences for the design of novel hydrogels and materials. We have studied the elastic properties of the myosin coiled-coil at the single molecule level. The coiled-coil undergoes a massive structural transition at forces between 20 and 25 pN where the coil extends to about 2.5 times its original length. Unlike all other proteins investigated mechanically so far, this transition is reversible on a timescale of less than a second, making the coiled-coil a truly elastic protein.

Animals↗

Induction of autoimmune diabetes through insulin (but not GAD65) DNA vaccination in nonobese diabetic and in RIP-B7.1 mice.

Insulin has been used to modify T-cell autoimmunity in experimental models of type 1 diabetes. In a large clinical trial, the effect of insulin to prevent type 1 diabetes is currently investigated. We here show that insulin can adversely trigger autoimmune diabetes in two mouse models of type 1 diabetes, using intramuscular DNA vaccination for antigen administration. In female nonobese diabetic (NOD) mice, diabetes development was enhanced after preproinsulin (ppIns) DNA treatment, and natural diabetes resistance in male NOD mice was diminished by ppIns DNA vaccination. In contrast, GAD65 DNA conferred partial diabetes protection, and empty DNA plasmid was without effect. In RIP-B7.1 C57BL/6 mice (expressing the T-cell costimulatory molecule B7.1 in pancreatic beta-cells), autoimmune diabetes occurred in 70% of animals after ppIns vaccination, whereas diabetes did not develop spontaneously in RIP-B7.1 mice or after GAD65 or control DNA treatment. Diabetes was characterized by diffuse CD4(+)CD8(+) T-cell infiltration of pancreatic islets and severe insulin deficiency, and ppIns, proinsulin, and insulin DNA were equally effective for disease induction. Our work provides a new model of experimental autoimmune diabetes suitable to study mechanisms and outcomes of insulin-specific T-cell reactivity. In antigen-based prevention of type 1 diabetes, diabetes acceleration should be considered as a potential adverse result.

Aging↗